INA122PA vs INA121P Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA122PA tarafından Texas Instruments ve INA121P tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ AktifTexas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifÖzellik Karşılaştırması
| Parametre | INA122PA | INA121P |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | 1 | 1 |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| Durağan Akım | 60 uA | ±450 µA typical |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Gain Range | 5 V/V to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Paket | 8-pin PDIP (P) | 8-Pin PDIP (P) |
| Montaj Türü | Through-hole | Through-Hole |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Slew Rate | [DATA_NEEDED: slew rate specification] | [DATA_NEEDED: slew rate from datasheet] |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | Compliant |
| Input Type | — | FET / CMOS |
| Input Bias Current | — | ±4 pA typical |
| Input Offset Voltage | — | ±200 µV typical |
| Input Offset Drift | — | ±2 µV/°C typical |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Input Protection | — | ±40 V differential and common-mode |
| Lead-Free Finish | — | Yes (Matte Tin) |