INA122PA vs INA121P 比較

詳細並排比較 INA122PA 由 Texas Instruments 與 INA121P 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

規格比較

參數 INA122PA INA121P
品牌 Texas Instruments Texas Instruments
類別 Amplifier ICs Amplifier ICs
生命週期狀態 啟用中 啟用中
Amplifier Type Instrumentation amplifier, two-op-amp design Instrumentation Amplifier (3-op-amp topology)
Number of Channels 1 1
Supply Voltage Range (Single Supply) 2.2 V to 36 V —
Supply Voltage Range (Dual Supply) +/-18 V —
靜態電流 60 uA ±450 µA typical
Input Offset Voltage (max) 250 uV —
Input Offset Drift (max) 3 uV/degC —
Common-Mode Rejection Ratio 90 dB —
Gain Range 5 V/V to 10,000 V/V 1 V/V to 10,000 V/V (single external resistor)
Gain Bandwidth Product 120 kHz —
Input Common-Mode Range (V-) - 0.1 V —
Output Swing Rail-to-rail —
封裝 8-pin PDIP (P) 8-Pin PDIP (P)
安裝類型 Through-hole Through-Hole
Supply Type Single or dual supply operation —
Input Noise [DATA_NEEDED: input noise specification] —
Slew Rate [DATA_NEEDED: slew rate specification] [DATA_NEEDED: slew rate from datasheet]
工作溫度範圍 [DATA_NEEDED: operating temperature range] -40 °C to +85 °C
RoHS 狀態 [DATA_NEEDED: RoHS status] Compliant
Input Type — FET / CMOS
Input Bias Current — ±4 pA typical
Input Offset Voltage — ±200 µV typical
Input Offset Drift — ±2 µV/°C typical
Input Voltage Noise Density — 20 nV/√Hz at 1 kHz
Common-Mode Rejection Ratio (CMRR) — 106 dB minimum
Bandwidth (-3 dB) — 600 kHz at G = 100
Nonlinearity Error — 0.001% (G = 10)
Supply Voltage Range — ±2.25 V to ±18 V
Input Protection — ±40 V differential and common-mode
Lead-Free Finish — Yes (Matte Tin)

資料表與資源

瀏覽所有產品 建立 BOM 索取報價