INA122PA vs INA121P Perbandingan
Perbandingan bersamaan detil INA122PA dari Texas Instruments dan INA121P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ AktifTexas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA122PA | INA121P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | 1 | 1 |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| Arus Memerintah | 60 uA | ±450 µA typical |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Gain Range | 5 V/V to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Paket | 8-pin PDIP (P) | 8-Pin PDIP (P) |
| Tipe Mounting | Through-hole | Through-Hole |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Slew Rate | [DATA_NEEDED: slew rate specification] | [DATA_NEEDED: slew rate from datasheet] |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Input Type | — | FET / CMOS |
| Input Bias Current | — | ±4 pA typical |
| Input Offset Voltage | — | ±200 µV typical |
| Input Offset Drift | — | ±2 µV/°C typical |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Input Protection | — | ±40 V differential and common-mode |
| Lead-Free Finish | — | Yes (Matte Tin) |