INA122PA vs INA121P Vergleich
Detaillierter Direktvergleich von INA122PA von Texas Instruments und INA121P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ AktivTexas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktivSpezifikationsvergleich
| Parameter | INA122PA | INA121P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Instrumentation amplifier, two-op-amp design | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | 1 | 1 |
| Supply Voltage Range (Single Supply) | 2.2 V to 36 V | — |
| Supply Voltage Range (Dual Supply) | +/-18 V | — |
| Ruhestrom | 60 uA | ±450 µA typical |
| Input Offset Voltage (max) | 250 uV | — |
| Input Offset Drift (max) | 3 uV/degC | — |
| Common-Mode Rejection Ratio | 90 dB | — |
| Gain Range | 5 V/V to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Bandwidth Product | 120 kHz | — |
| Input Common-Mode Range | (V-) - 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Gehäuse | 8-pin PDIP (P) | 8-Pin PDIP (P) |
| Montageart | Through-hole | Through-Hole |
| Supply Type | Single or dual supply operation | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Slew Rate | [DATA_NEEDED: slew rate specification] | [DATA_NEEDED: slew rate from datasheet] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| Input Type | — | FET / CMOS |
| Input Bias Current | — | ±4 pA typical |
| Input Offset Voltage | — | ±200 µV typical |
| Input Offset Drift | — | ±2 µV/°C typical |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Input Protection | — | ±40 V differential and common-mode |
| Lead-Free Finish | — | Yes (Matte Tin) |