KSZ9031MNXCA vs KSZ9031RNXCA مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ KSZ9031MNXCA بواسطة Microchip Technology و KSZ9031RNXCA بواسطة Microchip Technology. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

Microchip Technology
KSZ9031MNXCA KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA ✓ نشط
Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ نشط

مقارنة المواصفات

المعامل KSZ9031MNXCA KSZ9031RNXCA
العلامة التجارية Microchip Technology Microchip Technology
الفئة Interface ICs Interface ICs
حالة دورة الحياة نشط نشط
Product Type Automotive Ethernet physical-layer transceiver Gigabit Ethernet physical-layer transceiver
Ethernet Port Count 1 port —
Supported Ethernet Speeds 10Base-T, 100Base-TX, and 1000Base-T —
Maximum Nominal Ethernet Rate 1000 Mb/s —
Medium Support Standard CAT-5 unshielded twisted pair —
Host Interface GMII and MII RGMII
Cable Diagnostics LinkMD LinkMD
Automotive Qualification Automotive qualified Automotive qualified
Supply Voltage Options 3.3 V, 2.5 V, and 1.8 V 1.8 V, 2.5 V, and 3.3 V
العلبة 48-QFN, 7x7 mm 48-pin QFN, 7 mm x 7 mm
نوع التركيب Surface mount Surface mount
Auto-Negotiation IEEE 802.3 Clause 28 —
Maximum Gigabit Ethernet Cable Length [DATA_NEEDED: maximum 1000Base-T cable length] —
نطاق درجة حرارة التشغيل [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Media Interface Magnetics [DATA_NEEDED: supported magnetic-component configuration] —
حالة RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Grade [DATA_NEEDED: AEC-Q100 qualification grade] —
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Data Path — 4-wire full-duplex Ethernet
Analog Core Supply — 1.2 V
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر