KSZ9031MNXCA vs KSZ9031RNXCA Karşılaştırma
Ayrıntılı yan yana karşılaştırma KSZ9031MNXCA tarafından Microchip Technology ve KSZ9031RNXCA tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Microchip Technology
KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip
KSZ9031MNXCA ✓ AktifMicrochip Technology
KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology
KSZ9031RNXCA ✓ AktifÖzellik Karşılaştırması
| Parametre | KSZ9031MNXCA | KSZ9031RNXCA |
|---|---|---|
| Marka | Microchip Technology | Microchip Technology |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Automotive Ethernet physical-layer transceiver | Gigabit Ethernet physical-layer transceiver |
| Ethernet Port Count | 1 port | — |
| Supported Ethernet Speeds | 10Base-T, 100Base-TX, and 1000Base-T | — |
| Maximum Nominal Ethernet Rate | 1000 Mb/s | — |
| Medium Support | Standard CAT-5 unshielded twisted pair | — |
| Host Interface | GMII and MII | RGMII |
| Cable Diagnostics | LinkMD | LinkMD |
| Automotive Qualification | Automotive qualified | Automotive qualified |
| Supply Voltage Options | 3.3 V, 2.5 V, and 1.8 V | 1.8 V, 2.5 V, and 3.3 V |
| Paket | 48-QFN, 7x7 mm | 48-pin QFN, 7 mm x 7 mm |
| Montaj Türü | Surface mount | Surface mount |
| Auto-Negotiation | IEEE 802.3 Clause 28 | — |
| Maximum Gigabit Ethernet Cable Length | [DATA_NEEDED: maximum 1000Base-T cable length] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Media Interface Magnetics | [DATA_NEEDED: supported magnetic-component configuration] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Grade | [DATA_NEEDED: AEC-Q100 qualification grade] | — |
| Supported Speeds | — | 10 Mbps, 100 Mbps, and 1 Gbps |
| Supported Ethernet Modes | — | 10Base-T, 100Base-TX, and 1000Base-T |
| Data Path | — | 4-wire full-duplex Ethernet |
| Analog Core Supply | — | 1.2 V |
| Time-Domain Reflectometry Diagnostics | — | Supported TDR-based cable testing |
| Mode Configuration | — | MODE[3:0] strap inputs |
| Hardware Reset Input | — | RESET_N, pin 42 |
| AVDDL Bulk Capacitance | — | 10 uF |
| AVDDL Local Decoupling | — | 0.1 uF per AVDDL pin |
| AVDDL Ferrite Bead Impedance | — | 100 ohm to 220 ohm at 100 MHz |