KSZ9031MNXCA vs KSZ9031RNXCA موازنہ

تفصیلی ساتھ ساتھ موازنہ از KSZ9031MNXCA بذریعہ Microchip Technology اور KSZ9031RNXCA بذریعہ Microchip Technology. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Microchip Technology
KSZ9031MNXCA KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA ✓ فعال
Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر KSZ9031MNXCA KSZ9031RNXCA
برانڈ Microchip Technology Microchip Technology
زمرہ Interface ICs Interface ICs
لائف سائیکل کی حالت فعال فعال
Product Type Automotive Ethernet physical-layer transceiver Gigabit Ethernet physical-layer transceiver
Ethernet Port Count 1 port —
Supported Ethernet Speeds 10Base-T, 100Base-TX, and 1000Base-T —
Maximum Nominal Ethernet Rate 1000 Mb/s —
Medium Support Standard CAT-5 unshielded twisted pair —
Host Interface GMII and MII RGMII
Cable Diagnostics LinkMD LinkMD
Automotive Qualification Automotive qualified Automotive qualified
Supply Voltage Options 3.3 V, 2.5 V, and 1.8 V 1.8 V, 2.5 V, and 3.3 V
پیکیج 48-QFN, 7x7 mm 48-pin QFN, 7 mm x 7 mm
ماؤنٹنگ ٹائپ Surface mount Surface mount
Auto-Negotiation IEEE 802.3 Clause 28 —
Maximum Gigabit Ethernet Cable Length [DATA_NEEDED: maximum 1000Base-T cable length] —
آپریٹنگ درجہ حرارت رینج [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Media Interface Magnetics [DATA_NEEDED: supported magnetic-component configuration] —
RoHS اسٹیٹس [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Grade [DATA_NEEDED: AEC-Q100 qualification grade] —
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Data Path — 4-wire full-duplex Ethernet
Analog Core Supply — 1.2 V
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں