KSZ9031MNXCA vs KSZ9031RNXCA Comparaison

Comparaison détaillée côte à côte de KSZ9031MNXCA par Microchip Technology et KSZ9031RNXCA par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Microchip Technology
KSZ9031MNXCA KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA ✓ Actif
Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ Actif

Comparaison des spécifications

Paramètre KSZ9031MNXCA KSZ9031RNXCA
Marque Microchip Technology Microchip Technology
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Automotive Ethernet physical-layer transceiver Gigabit Ethernet physical-layer transceiver
Ethernet Port Count 1 port —
Supported Ethernet Speeds 10Base-T, 100Base-TX, and 1000Base-T —
Maximum Nominal Ethernet Rate 1000 Mb/s —
Medium Support Standard CAT-5 unshielded twisted pair —
Host Interface GMII and MII RGMII
Cable Diagnostics LinkMD LinkMD
Automotive Qualification Automotive qualified Automotive qualified
Supply Voltage Options 3.3 V, 2.5 V, and 1.8 V 1.8 V, 2.5 V, and 3.3 V
Boîtier 48-QFN, 7x7 mm 48-pin QFN, 7 mm x 7 mm
Type de montage Surface mount Surface mount
Auto-Negotiation IEEE 802.3 Clause 28 —
Maximum Gigabit Ethernet Cable Length [DATA_NEEDED: maximum 1000Base-T cable length] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Media Interface Magnetics [DATA_NEEDED: supported magnetic-component configuration] —
Statut RoHS [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Grade [DATA_NEEDED: AEC-Q100 qualification grade] —
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Data Path — 4-wire full-duplex Ethernet
Analog Core Supply — 1.2 V
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis