KSZ9031MNXCA vs KSZ9031RNXCA Vergleich

Detaillierter Direktvergleich von KSZ9031MNXCA von Microchip Technology und KSZ9031RNXCA von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Microchip Technology
KSZ9031MNXCA KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA - Automotive Gigabit Ethernet PHY | Microchip

KSZ9031MNXCA ✓ Aktiv
Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ Aktiv

Spezifikationsvergleich

Parameter KSZ9031MNXCA KSZ9031RNXCA
Marke Microchip Technology Microchip Technology
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Product Type Automotive Ethernet physical-layer transceiver Gigabit Ethernet physical-layer transceiver
Ethernet Port Count 1 port —
Supported Ethernet Speeds 10Base-T, 100Base-TX, and 1000Base-T —
Maximum Nominal Ethernet Rate 1000 Mb/s —
Medium Support Standard CAT-5 unshielded twisted pair —
Host Interface GMII and MII RGMII
Cable Diagnostics LinkMD LinkMD
Automotive Qualification Automotive qualified Automotive qualified
Supply Voltage Options 3.3 V, 2.5 V, and 1.8 V 1.8 V, 2.5 V, and 3.3 V
Gehäuse 48-QFN, 7x7 mm 48-pin QFN, 7 mm x 7 mm
Montageart Surface mount Surface mount
Auto-Negotiation IEEE 802.3 Clause 28 —
Maximum Gigabit Ethernet Cable Length [DATA_NEEDED: maximum 1000Base-T cable length] —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Media Interface Magnetics [DATA_NEEDED: supported magnetic-component configuration] —
RoHS-Status [DATA_NEEDED: RoHS compliance status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance status] [DATA_NEEDED: REACH status]
AEC-Q100 Grade [DATA_NEEDED: AEC-Q100 qualification grade] —
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Data Path — 4-wire full-duplex Ethernet
Analog Core Supply — 1.2 V
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern