L6470H vs AMIS30542 مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ L6470H بواسطة STMicroelectronics و AMIS30542 بواسطة onsemi. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

مقارنة المواصفات

المعامل L6470H AMIS30542
العلامة التجارية STMicroelectronics onsemi
الفئة Motor Drivers Motor Drivers
حالة دورة الحياة نشط نشط
سعر الوحدة (USD) $2.37 —
Supply Voltage Range 8 V to 45 V —
Output Current (Peak) 3 A per phase —
Output Current (RMS) 2.1 A per phase —
Microstepping Resolution Up to 1/128 step —
Control Interface SPI —
Motion Engine dSPIN™ with programmable acceleration/deceleration —
Protection Features Overcurrent, overtemperature, undervoltage lockout —
العلبة HTSSOP-28 (PowerSO-28) NQFP-32 (7x7 mm)
نوع التركيب Surface Mount Surface Mount
نطاق درجة حرارة التشغيل -40 °C to +150 °C -40 C to +125 C
Thermal Resistance (θJA) 25 °C/W —
Logic Supply Voltage 3.3 V or 5 V —
Standby Current 5 µA (typ) —
حالة RoHS Compliant Compliant
مستوى MSL 3 (168 hours) 3
Motor Type — Bipolar stepper motor
تكوين الخرج — Dual H-bridge (4 half-bridges)
Maximum Phase Current (RMS) — 1500 mA
Motor Supply Voltage (VBB) — 6 V to 30 V
Logic Supply Voltage (VDD) — 3.3 V or 5 V
Micro-Step Resolution — Up to 1/32 step (programmable via SPI)
On-Chip 5 V Regulator Output — 5 V (for external MCU, up to ~50 mA)
Communication Interface — SPI (4-wire, plus NXT/DIR pins)
Integrated Fly-back Diodes — Yes (active fly-back)
Thermal Protection — Thermal warning + thermal shutdown
Diagnostic Features — Short-to-ground, short-to-supply, open-load detection
SLA (Speed/Load Angle) Output — Yes (transparent back-EMF monitor)

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر