L6470H vs AMIS30542 Perbandingan

Perbandingan bersamaan detil L6470H dari STMicroelectronics dan AMIS30542 dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum L6470H AMIS30542
Merek STMicroelectronics onsemi
Kategori Motor Drivers Motor Drivers
Status Lingkungan Hidup Aktif Aktif
Supply Voltage Range 8 V to 45 V —
Output Current (Peak) 3 A per phase —
Output Current (RMS) 2.1 A per phase —
Microstepping Resolution Up to 1/128 step —
Control Interface SPI —
Motion Engine dSPIN™ with programmable acceleration/deceleration —
Protection Features Overcurrent, overtemperature, undervoltage lockout —
Paket HTSSOP-28 (PowerSO-28) NQFP-32 (7x7 mm)
Tipe Mounting Surface Mount Surface Mount
Rentang Suhu Kerja -40 °C to +150 °C -40 C to +125 C
Thermal Resistance (θJA) 25 °C/W —
Logic Supply Voltage 3.3 V or 5 V —
Standby Current 5 µA (typ) —
Status RoHS Compliant Compliant
Level MSL 3 (168 hours) 3
Motor Type — Bipolar stepper motor
Konfigurasi Output — Dual H-bridge (4 half-bridges)
Maximum Phase Current (RMS) — 1500 mA
Motor Supply Voltage (VBB) — 6 V to 30 V
Logic Supply Voltage (VDD) — 3.3 V or 5 V
Micro-Step Resolution — Up to 1/32 step (programmable via SPI)
On-Chip 5 V Regulator Output — 5 V (for external MCU, up to ~50 mA)
Communication Interface — SPI (4-wire, plus NXT/DIR pins)
Integrated Fly-back Diodes — Yes (active fly-back)
Thermal Protection — Thermal warning + thermal shutdown
Diagnostic Features — Short-to-ground, short-to-supply, open-load detection
SLA (Speed/Load Angle) Output — Yes (transparent back-EMF monitor)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon