L6470H vs AMIS30542 तुलना
विस्तृत दोनों ओर की तुलना L6470H द्वारा STMicroelectronics और AMIS30542 द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
L6470H - dSPIN Stepper Motor Driver | STMicroelectronics | HTSSOP-28
L6470H ✓ सक्रियविशेषता तुलना
| पैरामीटर | L6470H | AMIS30542 |
|---|---|---|
| ब्रांड | STMicroelectronics | onsemi |
| श्रेणी | Motor Drivers | Motor Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| यूनिट मूल्य (USD) | $2.37 | — |
| Supply Voltage Range | 8 V to 45 V | — |
| Output Current (Peak) | 3 A per phase | — |
| Output Current (RMS) | 2.1 A per phase | — |
| Microstepping Resolution | Up to 1/128 step | — |
| Control Interface | SPI | — |
| Motion Engine | dSPIN™ with programmable acceleration/deceleration | — |
| Protection Features | Overcurrent, overtemperature, undervoltage lockout | — |
| पैकेज | HTSSOP-28 (PowerSO-28) | NQFP-32 (7x7 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| ऑपरेटिंग तापमान रेंज | -40 °C to +150 °C | -40 C to +125 C |
| Thermal Resistance (θJA) | 25 °C/W | — |
| Logic Supply Voltage | 3.3 V or 5 V | — |
| Standby Current | 5 µA (typ) | — |
| RoHS स्थिति | Compliant | Compliant |
| MSL स्तर | 3 (168 hours) | 3 |
| Motor Type | — | Bipolar stepper motor |
| आउटपुट कॉन्फ़िगरेशन | — | Dual H-bridge (4 half-bridges) |
| Maximum Phase Current (RMS) | — | 1500 mA |
| Motor Supply Voltage (VBB) | — | 6 V to 30 V |
| Logic Supply Voltage (VDD) | — | 3.3 V or 5 V |
| Micro-Step Resolution | — | Up to 1/32 step (programmable via SPI) |
| On-Chip 5 V Regulator Output | — | 5 V (for external MCU, up to ~50 mA) |
| Communication Interface | — | SPI (4-wire, plus NXT/DIR pins) |
| Integrated Fly-back Diodes | — | Yes (active fly-back) |
| Thermal Protection | — | Thermal warning + thermal shutdown |
| Diagnostic Features | — | Short-to-ground, short-to-supply, open-load detection |
| SLA (Speed/Load Angle) Output | — | Yes (transparent back-EMF monitor) |