P82B96P vs PCA9557D مقارنة

مقارنة تفصيلية جنبًا إلى جنب لـ P82B96P بواسطة Texas Instruments و PCA9557D بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.

Texas Instruments
P82B96P P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments

P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments

P82B96P ✓ نشط
Texas Instruments
PCA9557D PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D ✗ انتهى عمره الإنتاجي

مقارنة المواصفات

المعامل P82B96P PCA9557D
العلامة التجارية Texas Instruments Texas Instruments
الفئة Interface ICs Interface ICs
حالة دورة الحياة نشط نهاية العمر الإنتاجي
Product Type 2-bit bidirectional I2C/SMBus buffer and cable extender —
Number of Channels 2 channels —
Operating Supply Voltage Range 2 V to 15 V —
Maximum Stated Operating Frequency 400 kHz —
Bus Compatibility I2C and SMBus —
Data Direction Bidirectional —
Interface Architecture Non-latching bidirectional bus interface —
Direction Control Input None —
Supported Logic Levels 2 V to 15 V —
Sx/Sy Same-Node Connection Not supported —
العلبة 8-pin PDIP 16-SOIC (DR, 7.5 mil pitch)
نوع التركيب Through-hole Surface Mount
نطاق درجة حرارة التشغيل [DATA_NEEDED: operating temperature range] —
تيار السكون [DATA_NEEDED: quiescent current] —
Maximum Bus Capacitance [DATA_NEEDED: maximum bus capacitance] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Input Logic High Voltage [DATA_NEEDED: input logic-high voltage] —
Input Logic Low Voltage [DATA_NEEDED: input logic-low voltage] —
Output Low-Level Voltage [DATA_NEEDED: output low-level voltage] —
تيار التغذية [DATA_NEEDED: supply current] —
حالة RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Number of I/O Bits — 8
الواجهة — I2C, SMBus
Bus Frequency (Max) — 400 kHz
Supply Voltage (VCC) — 2.3 V to 5.5 V
درجة حرارة التشغيل — -40 C to +85 C
Standby Current (Max) — 1 uA
Output Drive Current per Bit — [DATA_NEEDED: per-bit source/sink mA rating]
I/O Voltage Tolerance — 5.5 V tolerant
Reset Input — Active-low hardware RESET + software reset (general call)
Interrupt Output (INT) — Yes, open-drain
Slave Address Pins — A0, A1, A2 (3 pins, 8 addresses within family)
مستوى MSL — 1 (unlimited floor life)
Lead-Free — Yes
Configuration Registers — Input/output direction registers, polarity inversion

أوراق البيانات والموارد

تصفح جميع المنتجات إنشاء BOM طلب عرض سعر