P82B96P vs PCA9557D השוואה

השוואה מפורטת זה לצד זה של P82B96P מאת Texas Instruments ו PCA9557D מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.

Texas Instruments
P82B96P P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments

P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments

P82B96P ✓ פעיל
Texas Instruments
PCA9557D PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D - 8-Bit I2C/SMBus I/O Expander with Reset | TI (Tape & Reel)

PCA9557D ✗ סוף ייצור

השוואת מפרטים

פרמטר P82B96P PCA9557D
מותג Texas Instruments Texas Instruments
קטגוריה Interface ICs Interface ICs
סטטוס מחזור חיים פעיל סוף חיים
Product Type 2-bit bidirectional I2C/SMBus buffer and cable extender —
Number of Channels 2 channels —
Operating Supply Voltage Range 2 V to 15 V —
Maximum Stated Operating Frequency 400 kHz —
Bus Compatibility I2C and SMBus —
Data Direction Bidirectional —
Interface Architecture Non-latching bidirectional bus interface —
Direction Control Input None —
Supported Logic Levels 2 V to 15 V —
Sx/Sy Same-Node Connection Not supported —
מארז 8-pin PDIP 16-SOIC (DR, 7.5 mil pitch)
סוג הרכבה Through-hole Surface Mount
טווח טמפרטורת פעולה [DATA_NEEDED: operating temperature range] —
זרם מנוחה [DATA_NEEDED: quiescent current] —
Maximum Bus Capacitance [DATA_NEEDED: maximum bus capacitance] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Input Logic High Voltage [DATA_NEEDED: input logic-high voltage] —
Input Logic Low Voltage [DATA_NEEDED: input logic-low voltage] —
Output Low-Level Voltage [DATA_NEEDED: output low-level voltage] —
זרם אספקה [DATA_NEEDED: supply current] —
סטטוס RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Number of I/O Bits — 8
ממשק — I2C, SMBus
Bus Frequency (Max) — 400 kHz
Supply Voltage (VCC) — 2.3 V to 5.5 V
טמפרטורת פעולה — -40 C to +85 C
Standby Current (Max) — 1 uA
Output Drive Current per Bit — [DATA_NEEDED: per-bit source/sink mA rating]
I/O Voltage Tolerance — 5.5 V tolerant
Reset Input — Active-low hardware RESET + software reset (general call)
Interrupt Output (INT) — Yes, open-drain
Slave Address Pins — A0, A1, A2 (3 pins, 8 addresses within family)
רמת MSL — 1 (unlimited floor life)
Lead-Free — Yes
Configuration Registers — Input/output direction registers, polarity inversion

Datasheets ומשאבים

עיין בכל המוצרים צור BOM בקשת הצעת מחיר