P82B96P vs PCA9557D Perbandingan

Perbandingan bersamaan detil P82B96P dari Texas Instruments dan PCA9557D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
P82B96P P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments

P82B96P - 2-Channel 400kHz I2C Buffer | Texas Instruments

P82B96P ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum P82B96P PCA9557D
Merek Texas Instruments Texas Instruments
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Akhir Hidup
Product Type 2-bit bidirectional I2C/SMBus buffer and cable extender —
Number of Channels 2 channels —
Operating Supply Voltage Range 2 V to 15 V —
Maximum Stated Operating Frequency 400 kHz —
Bus Compatibility I2C and SMBus —
Data Direction Bidirectional —
Interface Architecture Non-latching bidirectional bus interface —
Direction Control Input None —
Supported Logic Levels 2 V to 15 V —
Sx/Sy Same-Node Connection Not supported —
Paket 8-pin PDIP 16-SOIC (DR, 7.5 mil pitch)
Tipe Mounting Through-hole Surface Mount
Rentang Suhu Kerja [DATA_NEEDED: operating temperature range] —
Arus Memerintah [DATA_NEEDED: quiescent current] —
Maximum Bus Capacitance [DATA_NEEDED: maximum bus capacitance] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Input Logic High Voltage [DATA_NEEDED: input logic-high voltage] —
Input Logic Low Voltage [DATA_NEEDED: input logic-low voltage] —
Output Low-Level Voltage [DATA_NEEDED: output low-level voltage] —
Arus Pemuat [DATA_NEEDED: supply current] —
Status RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Number of I/O Bits — 8
Antarmuka — I2C, SMBus
Bus Frequency (Max) — 400 kHz
Supply Voltage (VCC) — 2.3 V to 5.5 V
Suhu Kerja — -40 C to +85 C
Standby Current (Max) — 1 uA
Output Drive Current per Bit — [DATA_NEEDED: per-bit source/sink mA rating]
I/O Voltage Tolerance — 5.5 V tolerant
Reset Input — Active-low hardware RESET + software reset (general call)
Interrupt Output (INT) — Yes, open-drain
Slave Address Pins — A0, A1, A2 (3 pins, 8 addresses within family)
Level MSL — 1 (unlimited floor life)
Lead-Free — Yes
Configuration Registers — Input/output direction registers, polarity inversion

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon