DSPIC30F6010T-20E/PF - 16-bit DSC, 20MIPS, 144KB Flash, 80-TQFP
MPN: DSPIC30F6010T-20E/PF ✓ نشطDSPIC30F6010T-20E/PF نظرة عامة
A digital signal controller (DSC) is a hybrid device that combines the interrupt-driven deterministic control of a microcontroller (MCU) with the computational throughput of a digital signal processor (DSP). In the broader taxonomy, the DSC sits between MCUs (lower DSP performance, simpler control loops) and standalone DSPs (higher throughput, less integration). It belongs to the power management and motor control hierarchy: DSC -> microcontroller -> embedded processor -> semiconductor IC.
Key differentiating features include an integrated CAN 2.0B module for industrial networking, plus I2C, SPI, and UART/USART connectivity, an enhanced 16-bit timer/counter block for PWM generation, and a fast 10-bit ADC with up to 16 sample-and-hold channels suitable for multi-phase motor current sensing. The 4.5V to 5.5V supply voltage aligns with industrial 5V rails, and the -40C to +125C extended temperature range enables automotive under-hood and industrial cabinet deployment.
Technically, the dsPIC30F6010 implements a 24-bit instruction word with a 16-bit data path, dual 40-bit accumulators, and a barrel shifter plus 17-bit x 17-bit hardware multiplier that delivers single-cycle MAC (multiply-accumulate) operations. This DSP pipeline enables execution of control loops such as field-oriented control (FOC) for three-phase motors within microseconds rather than tens of microseconds, while the deterministic interrupt structure preserves control stability.
Typical applications include three-phase AC induction motor and BLDC motor drives, switched-mode power supplies with digital PFC, automotive sensor conditioning, and industrial control via CAN bus. The wide temperature range and integrated analog peripherals also suit uninterruptible power supplies (UPS) and solar inverter control boards. When designing with this part, ensure the PLL configuration matches the external oscillator to avoid timing drift in DSP loops; Microchip's dsPIC30F Family Reference Manual provides the canonical register set.
بدائل مباشرة لـ DSPIC30F6010T-20E/PF — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع DSPIC30F6010T-20E/PF (نفس عامل الشكل والبصمة) — يختلف في Package, Core Architecture, Operating Temperature, Maximum CPU Speed, ADC.
DSPIC30F6010-20E/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6010A-20E/PF
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←DSPIC30F6010T-20E/PF الحدود القصوى والخصائص الكهربائية
| Core Architecture | dsPIC30F (16-bit DSC) |
| Program Memory | 144 KB (48K x 24) Flash |
| RAM | 8 KB |
| CPU Speed | 20 MIPS |
| Internal Clock Speed | 40 MHz |
| جهد التغذية | 4.5 V to 5.5 V |
| I/O Pins | 60 |
| ADC | 16 x 10-bit |
| Communication Interfaces | CAN, I2C, SPI, UART/USART |
| درجة حرارة التشغيل | -40C to +125C (Extended) |
| العلبة | 80-pin TQFP (14x14) (PF suffix) |
| نوع التركيب | Surface Mount |
| ROM Type | Flash |
| Lead-Free | Yes (PF suffix = lead-free TQFP) |
| DSP Engine | Yes (dual 40-bit accumulators, hardware MAC) |
تكوين أطراف DSPIC30F6010T-20E/PF
| دبوس 1 | AN0/OCFB — Analog input 0 / Output compare B |
| دبوس 2 | AN1 — Analog input 1 |
| دبوس 3 | AN2 — Analog input 2 |
| دبوس 4 | AN3 — Analog input 3 |
| دبوس 5 | AN4 — Analog input 4 |
| دبوس 6 | AN5 — Analog input 5 |
| دبوس 7 | AN6 — Analog input 6 |
| دبوس 8 | AN7 — Analog input 7 |
| دبوس 9 | AVDD — Analog supply voltage |
| دبوس 10 | AVSS — Analog ground |
| دبوس 11 | AN8 — Analog input 8 |
| دبوس 12 | AN9 — Analog input 9 |
| دبوس 13 | AN10 — Analog input 10 |
| دبوس 14 | AN11 — Analog input 11 |
| دبوس 15 | AN12 — Analog input 12 |
| دبوس 16 | AN13 — Analog input 13 |
| دبوس 17 | AN14 — Analog input 14 |
| دبوس 18 | AN15 — Analog input 15 |
| دبوس 19 | VDD — Digital supply voltage |
| دبوس 20 | VSS — Digital ground |
| دبوس 21 | OSC1/CLKI — Oscillator crystal input / external clock |
| دبوس 22 | OSC2/CLKO — Oscillator crystal output |
| دبوس 23 | MCLR — Master clear (reset) |
| دبوس 24 | PGED1/EMUD1 — ICSP data / ICD data |
| دبوس 25 | PGEC1/EMUC1 — ICSP clock / ICD clock |
| دبوس 26 | PGED2/EMUD2 — ICSP data 2 / ICD data 2 |
| دبوس 27 | PGEC2/EMUC2 — ICSP clock 2 / ICD clock 2 |
| دبوس 28 | C1RX — CAN1 receive |
| دبوس 29 | C1TX — CAN1 transmit |
| دبوس 30 | U1RX — UART1 receive |
| دبوس 31 | U1TX — UART1 transmit |
| دبوس 32 | SCK1 — SPI1 clock |
| دبوس 33 | SDI1 — SPI1 data in |
| دبوس 34 | SDO1 — SPI1 data out |
| دبوس 35 | SS1 — SPI1 slave select |
| دبوس 36 | SCL1 — I2C1 clock |
| دبوس 37 | SDA1 — I2C1 data |
| دبوس 38 | INT0 — External interrupt 0 |
| دبوس 39 | INT1 — External interrupt 1 |
| دبوس 40 | INT2 — External interrupt 2 |
| دبوس 41 | T1CK — Timer1 clock input |
| دبوس 42 | T2CK — Timer2 clock input |
| دبوس 43 | OC1 — Output compare 1 |
| دبوس 44 | OC2 — Output compare 2 |
| دبوس 45 | OC3 — Output compare 3 |
| دبوس 46 | OC4 — Output compare 4 |
| دبوس 47 | IC1 — Input capture 1 |
| دبوس 48 | IC2 — Input capture 2 |
| دبوس 49 | IC3 — Input capture 3 |
| دبوس 50 | IC4 — Input capture 4 |
| دبوس 51 | PWM1H — PWM1 high-side output |
| دبوس 52 | PWM1L — PWM1 low-side output |
| دبوس 53 | PWM2H — PWM2 high-side output |
| دبوس 54 | PWM2L — PWM2 low-side output |
| دبوس 55 | PWM3H — PWM3 high-side output |
| دبوس 56 | PWM3L — PWM3 low-side output |
| دبوس 57 | PWM4H — PWM4 high-side output |
| دبوس 58 | PWM4L — PWM4 low-side output |
| دبوس 59 | PWM5H — PWM5 high-side output |
| دبوس 60 | PWM5L — PWM5 low-side output |
| دبوس 61 | PWM6H — PWM6 high-side output |
| دبوس 62 | PWM6L — PWM6 low-side output |
| دبوس 63 | PWM7H — PWM7 high-side output |
| دبوس 64 | PWM7L — PWM7 low-side output |
| دبوس 65 | PWM8H — PWM8 high-side output |
| دبوس 66 | PWM8L — PWM8 low-side output |
| دبوس 67 | RB0 — Port B bit 0 |
| دبوس 68 | RB1 — Port B bit 1 |
| دبوس 69 | RB2 — Port B bit 2 |
| دبوس 70 | RB3 — Port B bit 3 |
| دبوس 71 | RB4 — Port B bit 4 |
| دبوس 72 | RB5 — Port B bit 5 |
| دبوس 73 | RB6 — Port B bit 6 |
| دبوس 74 | RB7 — Port B bit 7 |
| دبوس 75 | RC13 — Port C bit 13 |
| دبوس 76 | RC14 — Port C bit 14 |
| دبوس 77 | RD0 — Port D bit 0 |
| دبوس 78 | RD1 — Port D bit 1 |
| دبوس 79 | RF0 — Port F bit 0 |
| دبوس 80 | VDD — Digital supply voltage |
التطبيقات النموذجية
DSPIC30F6010T-20E/PF مناسب لـ 6 التطبيقs: Three-Phase BLDC Motor Control, Switched-Mode Power Supply with Digital PFC, Industrial CAN-Connected Sensor Hub, Automotive Body and Powertrain Control, Solar Inverter and UPS Control, Audio Processing and Active Filtering.
Three-Phase BLDC Motor Control
The DSPIC30F6010T-20E/PF is purpose-built for three-phase BLDC and PMSM motor control. Its 20 MIPS dsPIC core executes field-oriented control (FOC) loops within microseconds, while the 16-channel 10-bit ADC simultaneously samples phase currents for Clarke and Park transformations. The enhanced PWM module with complementary outputs and programmable dead-time drives the inverter directly. Dual 40-bit accumulators handle the DSP math, and the 144 KB Flash stores motor parameter tables and state machines. The -40C to +125C extended temperature range supports automotive under-hood and industrial cabinet environments.
موصى به
Switched-Mode Power Supply with Digital PFC
Digital PFC and SMPS control loops benefit from the DSP engine and ADC integration of the DSPIC30F6010T-20E/PF. The 10-bit ADC samples input voltage and current at the PWM rate, while the DSP pipeline computes the sinusoidal reference and compensator output in real time. The 60 I/O pins support multiple converter channels, auxiliary analog sensing, and communication to supervisory controllers. CAN and UART links enable telemetry and firmware updates in field-deployed power systems. The 4.5V to 5.5V supply aligns with standard industrial 5V rails.
موصى به
Industrial CAN-Connected Sensor Hub
The integrated CAN 2.0B controller on the DSPIC30F6010T-20E/PF enables direct connection to CANopen, DeviceNet, or proprietary CAN networks without an external transceiver logic block. Combined with I2C and SPI, the part serves as a multi-protocol industrial sensor hub, aggregating analog sensor data via the 16-channel ADC and forwarding it over CAN. The wide temperature range and 5V supply tolerance suit factory-floor installations. The 8 KB RAM buffers burst sensor data before transmission.
موصى به
Automotive Body and Powertrain Control
The DSPIC30F6010T-20E/PF's -40C to +125C extended temperature grade and integrated CAN bus make it suitable for automotive body controllers, HVAC actuators, and auxiliary powertrain modules. Its DSP capabilities support sensor-fusion algorithms for throttle-by-wire or active suspension, while the 144 KB Flash accommodates calibration tables and diagnostics. The 80-TQFP package withstands automotive under-hood thermal and vibration stress when paired with proper PCB mounting.
موصى به
Solar Inverter and UPS Control
Solar inverters and UPS systems require deterministic digital control of the power stage with grid-synchronization telemetry. The DSPIC30F6010T-20E/PF's 20 MIPS performance executes MPPT (maximum power point tracking) and grid-synchronization algorithms while the PWM block drives the IGBT bridge. The 16-channel ADC monitors DC bus voltage, AC output current, and temperature sensors simultaneously. CAN or UART links provide remote monitoring. Industrial temperature rating supports outdoor inverter enclosures.
موصى به
Audio Processing and Active Filtering
The DSP engine of the DSPIC30F6010T-20E/PF, with dual 40-bit accumulators and hardware MAC, supports real-time audio processing tasks such as active noise cancellation, parametric equalization, and crossover filtering. The 144 KB Flash stores coefficient tables, while the 8 KB RAM holds audio sample buffers. SPI can interface to external audio CODECs, and the I2C bus manages peripheral configuration. Extended temperature tolerance suits professional audio equipment operating in non-climate-controlled venues.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ DSPIC30F6010T-20E/PF — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | DSPIC30F6010-20E/PF | DSPIC30F6010A-20E/PF | DSPIC30F6010AT-20E/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-pin TQFP (14x14) | 80-pin TQFP (14x14) - same | 80-pin TQFP (14x14) - same | 64-pin TQFP - different |
| Core | dsPIC30F 16-bit | dsPIC30F 16-bit | dsPIC30F 16-bit (A-revision) | dsPIC30F 16-bit (A-revision) |
| Program Flash | 144 KB | 144 KB | 144 KB | 144 KB |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB |
| CPU Speed | 20 MIPS | 20 MIPS | 20 MIPS | 20 MIPS |
| ADC | 16 x 10-bit | 16 x 10-bit | 16 x 12-bit (improved) | 16 x 12-bit (improved) |
| I/O Pins | 60 | 60 | 60 | 52 |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +85C |
أبرز الفروقات
- Same die, tray-pack option for high-volume production (مقابلDSPIC30F6010-20E/PF)
- A-revision silicon offers 12-bit ADC upgrade in same package (مقابلDSPIC30F6010A-20E/PF)
- 60 I/O pins versus 52 in the 64-pin variant (مقابلDSPIC30F6010AT-20E/PT)
ملاحظات التصميم
The DSPIC30F6010T-20E/PF requires both AVDD/AVSS and VDD/VSS pairs, with the analog supply pins filtered through ferrite beads or pi-filters to isolate ADC noise from digital switching. Place 100 nF decoupling capacitors as close as possible to each VDD/AVDD pin, with a bulk 10 uF tantalum or ceramic on the analog rail. Per Microchip application note AN688, ADC accuracy degrades significantly if analog and digital grounds are not separated at the PCB level.
The 80-pin TQFP package has a thermal resistance of approximately 45 C/W (theta JA) without dedicated copper pours. At 20 MIPS with all peripherals active, power dissipation is typically 150-200 mW; for industrial cabinets this is well within safe limits, but for enclosed motor-drive enclosures above 60C ambient, attach thermal copper pours under the exposed pad region or use forced-air cooling.
Estimated: For switching applications, the PWM outputs should be routed away from the analog ADC inputs to minimize capacitive coupling. Maintain at least 5 mm separation or place a ground guard trace between PWM traces and ADC input traces. The ICSP/ICD pins (PGED1/PGEC1) must be accessible for in-circuit programming - do not place large components or test points that block probe access.
A common pitfall is failing to configure the PLL and oscillator correctly before enabling DSP instructions. If the oscillator is unstable or the PLL fails to lock, DSP MAC operations can corrupt accumulators. Always poll the OSCCON LOCK bit and validate the system clock before initializing peripheral modules. Also, the ADC channel-to-pin mapping differs from PIC24/dsPIC33 families - verify the datasheet pinout table before porting code from another DSC.
معلومات الامتثال
RoHS compliant per PF (lead-free) suffix in Microchip ordering information. The -20E speed grade is the Extended temperature variant. AEC-Q100 automotive qualification is not declared on the standard product page - for AEC-Q100 qualified parts consult Microchip's automotive product line.
