NE5532DR vs TS902ID তুলনা
. বিস্তৃত সাথে-সাথে তুলনা NE5532DR নির্দিষ্ট Texas Instruments ও TS902ID নির্দিষ্ট STMicroelectronics. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
Texas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ সক্রিয়STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID Obsoleteবিশিষ্টতা তুলনা
| পারামিটার | NE5532DR | TS902ID |
|---|---|---|
| ব্র্যান্ড | Texas Instruments | STMicroelectronics |
| ক্যাটাগরি | Amplifier ICs | Amplifier ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | Obsolete |
| Amplifier Type | Dual low-noise operational amplifier | Dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| অপারেটিং তাপমাত্রার পরিসর | 0 °C to +70 °C for NE5532x | -40C to +125C |
| প্যাকেজ | 8-pin SOIC | SOIC-14 (SO14), surface mount |
| মাউন্টিং টাইপ | Surface Mount | Surface mount |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | General-purpose instrumentation and signal conditioning |
| Manufacturer | Texas Instruments | — |
| RoHS স্ট্যাটাস | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| সাপ্লাই কারেন্ট | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Channel Count | — | 2 channels |
| Rail-to-Rail | — | Input and output |
| Gain-Bandwidth Product | — | 1.4 MHz |
| Input Offset Voltage | — | 10 mV |
| Supply Voltage Range | — | Single or dual operation from 2.5 V to 16 V |
| Standby Current | — | 0.5 uA |
| Standby Output State | — | Reduced current consumption and high-impedance outputs |
| Package Pin Count | — | 14 pins |
| Architecture | — | CMOS |
| Output Impedance in Standby | — | High impedance |
| Operating Mode | — | Single-supply or dual-supply operation |
| Manufacturer Product Description | — | Rail-to-rail CMOS dual operational amplifier with standby position |
| লাইফসাইকেল স্ট্যাটাস | — | Obsolete product according to manufacturer catalog |