NE5532DR vs TS902ID Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng NE5532DR sa pamamagitan ng Texas Instruments at TS902ID sa pamamagitan ng STMicroelectronics. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Texas Instruments
NE5532DR NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments

NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments

NE5532DR ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro NE5532DR TS902ID
Brand Texas Instruments STMicroelectronics
Kategorya Amplifier ICs Amplifier ICs
Katayuan ng Lifecycle Aktibo Obsolete
Amplifier Type Dual low-noise operational amplifier Dual operational amplifier
Number of Amplifier Circuits 2 circuits —
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz —
Unity-Gain Bandwidth 10 MHz typical —
DC Voltage Gain 100 V/mV typical —
Slew Rate 10 V/μs typical —
Common-Mode Rejection Ratio 100 dB typical —
Specified Supply Voltage Range ±5 V to ±15 V —
Maximum Total Supply Voltage 30 V —
Output Voltage Swing 32 V peak-to-peak typical at ±18 V and 600 Ω load —
Hanay ng Temperature na Operasyon 0 °C to +70 °C for NE5532x -40C to +125C
Packhaging 8-pin SOIC SOIC-14 (SO14), surface mount
Uri ng Pagpapasok Surface Mount Surface mount
Product Category Standard general-purpose amplifier —
Application Category Audio applications General-purpose instrumentation and signal conditioning
Manufacturer Texas Instruments —
Tindminan RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
Kuru-kuryente ng Pagbibigay [DATA_NEEDED: supply current] —
Input Bias Current [DATA_NEEDED: input bias current] —
Open-Loop Gain [DATA_NEEDED: open-loop gain at specified frequency] —
Noise at 20 Hz to 20 kHz [DATA_NEEDED: total input noise over audio bandwidth] —
Channel Count — 2 channels
Rail-to-Rail — Input and output
Gain-Bandwidth Product — 1.4 MHz
Input Offset Voltage — 10 mV
Supply Voltage Range — Single or dual operation from 2.5 V to 16 V
Standby Current — 0.5 uA
Standby Output State — Reduced current consumption and high-impedance outputs
Package Pin Count — 14 pins
Architecture — CMOS
Output Impedance in Standby — High impedance
Operating Mode — Single-supply or dual-supply operation
Manufacturer Product Description — Rail-to-rail CMOS dual operational amplifier with standby position
Katayuan ng Lifecycle — Obsolete product according to manufacturer catalog

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita