NE5532DR vs TS902ID Perbandingan
Perbandingan bersamaan detil NE5532DR dari Texas Instruments dan TS902ID dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID ObsoletePerbandingan Spesifikasi
| Parameter Umum | NE5532DR | TS902ID |
|---|---|---|
| Merek | Texas Instruments | STMicroelectronics |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Obsolete |
| Amplifier Type | Dual low-noise operational amplifier | Dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Rentang Suhu Kerja | 0 °C to +70 °C for NE5532x | -40C to +125C |
| Paket | 8-pin SOIC | SOIC-14 (SO14), surface mount |
| Tipe Mounting | Surface Mount | Surface mount |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | General-purpose instrumentation and signal conditioning |
| Manufacturer | Texas Instruments | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Arus Pemuat | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Channel Count | — | 2 channels |
| Rail-to-Rail | — | Input and output |
| Gain-Bandwidth Product | — | 1.4 MHz |
| Input Offset Voltage | — | 10 mV |
| Supply Voltage Range | — | Single or dual operation from 2.5 V to 16 V |
| Standby Current | — | 0.5 uA |
| Standby Output State | — | Reduced current consumption and high-impedance outputs |
| Package Pin Count | — | 14 pins |
| Architecture | — | CMOS |
| Output Impedance in Standby | — | High impedance |
| Operating Mode | — | Single-supply or dual-supply operation |
| Manufacturer Product Description | — | Rail-to-rail CMOS dual operational amplifier with standby position |
| Status Lingkungan Hidup | — | Obsolete product according to manufacturer catalog |