NE5532DR vs TS902ID तुलना
विस्तृत दोनों ओर की तुलना NE5532DR द्वारा Texas Instruments और TS902ID द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ सक्रियSTMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID Obsoleteविशेषता तुलना
| पैरामीटर | NE5532DR | TS902ID |
|---|---|---|
| ब्रांड | Texas Instruments | STMicroelectronics |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Amplifier Type | Dual low-noise operational amplifier | Dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| ऑपरेटिंग तापमान रेंज | 0 °C to +70 °C for NE5532x | -40C to +125C |
| पैकेज | 8-pin SOIC | SOIC-14 (SO14), surface mount |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | General-purpose instrumentation and signal conditioning |
| Manufacturer | Texas Instruments | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| सप्लाई करंट | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Channel Count | — | 2 channels |
| Rail-to-Rail | — | Input and output |
| Gain-Bandwidth Product | — | 1.4 MHz |
| Input Offset Voltage | — | 10 mV |
| Supply Voltage Range | — | Single or dual operation from 2.5 V to 16 V |
| Standby Current | — | 0.5 uA |
| Standby Output State | — | Reduced current consumption and high-impedance outputs |
| Package Pin Count | — | 14 pins |
| Architecture | — | CMOS |
| Output Impedance in Standby | — | High impedance |
| Operating Mode | — | Single-supply or dual-supply operation |
| Manufacturer Product Description | — | Rail-to-rail CMOS dual operational amplifier with standby position |
| लाइफसाइकिल स्थिति | — | Obsolete product according to manufacturer catalog |