NE5532DR vs TS902ID So sánh
So sánh chi tiết song song của NE5532DR bằng Texas Instruments và TS902ID bằng STMicroelectronics. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments
NE5532DR ✓ Hoạt độngSTMicroelectronics
TS902ID - Dual Rail-to-Rail Op Amp with Standby | STMicroelectronics
TS902ID ObsoleteSo sánh thông số kỹ thuật
| Tham số | NE5532DR | TS902ID |
|---|---|---|
| Thương hiệu | Texas Instruments | STMicroelectronics |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Obsolete |
| Amplifier Type | Dual low-noise operational amplifier | Dual operational amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Khoảng nhiệt độ hoạt động | 0 °C to +70 °C for NE5532x | -40C to +125C |
| Hộp | 8-pin SOIC | SOIC-14 (SO14), surface mount |
| Kiểu lắp đặt | Surface Mount | Surface mount |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | General-purpose instrumentation and signal conditioning |
| Manufacturer | Texas Instruments | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Channel Count | — | 2 channels |
| Rail-to-Rail | — | Input and output |
| Gain-Bandwidth Product | — | 1.4 MHz |
| Input Offset Voltage | — | 10 mV |
| Supply Voltage Range | — | Single or dual operation from 2.5 V to 16 V |
| Standby Current | — | 0.5 uA |
| Standby Output State | — | Reduced current consumption and high-impedance outputs |
| Package Pin Count | — | 14 pins |
| Architecture | — | CMOS |
| Output Impedance in Standby | — | High impedance |
| Operating Mode | — | Single-supply or dual-supply operation |
| Manufacturer Product Description | — | Rail-to-rail CMOS dual operational amplifier with standby position |
| Trạng thái vòng đời | — | Obsolete product according to manufacturer catalog |