LM2904BIDGKR - Dual 36V 1.2MHz Op Amp | Texas Instruments
MPN: LM2904BIDGKR ✓ সক্রিয়LM2904BIDGKR সারাংশ
An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. The dual architecture provides two independent amplifiers in one package, making the LM2904B suitable for signal conditioning, current monitoring, filtering, and general feedback-control circuits. Its position in the signal-chain hierarchy is operational amplifier, analog amplifier, analog integrated circuit, and semiconductor.
The LM2904B version provides a 3 V to 36 V operating supply range, a 1.2 MHz gain-bandwidth product, and a 0.5 V/us slew rate. The improved LM2904B family also features enhanced ESD protection relative to the original LM2904 family. These characteristics make it suitable for industrial control systems and other applications operating from industrial supply rails.
Two independent amplifier channels are provided in a compact 8-pin surface-mount package. The wide supply range allows operation from a single low-voltage rail or from split positive and negative supplies when the circuit requires them. The device is intended for general-purpose applications rather than precision instrumentation, where very low offset voltage and very low bias current would be required.
Typical uses include transducer and sensor signal conditioning, low-frequency active filters, audio and communications interface circuits, voltage monitoring, and process-control loops. Industrial instrumentation is a natural fit because the specified operating temperature reaches 125C. The 1.2 MHz bandwidth supports lower-frequency precision and control tasks rather than high-speed video or RF applications.
When designing the circuit, verify input and output common-mode limits at the selected supply voltage and provide adequate output-current headroom for the load and feedback network. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier channel should be configured with inputs tied to a valid common-mode voltage rather than left floating.
This page consolidates package, temperature, electrical-performance, and cross-reference information into an engineering-focused selection guide. It also documents verified drop-in relationships, practical layout guidance, application use cases, and parameter-level comparisons that help shorten design evaluation time.
এর জন্য ড্রপ-ইন বিকল্প LM2904BIDGKR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible LM2904BIDGKR (একই form factor এবং footprint) — পার্থক্য রয়েছে Amplifier Type, Gain-Bandwidth Product, Maximum Supply Voltage.
LM2904DGKR
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →LM2904BIDGKR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Circuits | 2 circuits |
| Maximum Supply Voltage | 36 V |
| Operating Supply Voltage Range | 3 V to 36 V |
| Gain-Bandwidth Product | 1.2 MHz |
| Slew Rate | 0.5 V/us |
| অপারেটিং তাপমাত্রার পরিসর | -40C to +125C |
| Package Type | 8-pin VSSOP (DGK) |
| মাউন্টিং টাইপ | Surface mount |
| Package Pin Count | 8 pins |
| ESD Protection | Improved ESD protection |
LM2904BIDGKR 8 pins পিন কনফিগারেশন গাইড
LM2904BIDGKR (8 pins প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি LM2904BIDGKR.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
LM2904BIDGKR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Signal Conditioning, Process Control Feedback Loops, Low-Frequency Active Filters, Audio Preamplification and Buffering, Voltage Monitoring and Threshold Detection, Communications Interface Conditioning.
Industrial Sensor Signal Conditioning
The LM2904BIDGKR suits analog sensor interfaces that require two amplifiers within one compact package. Its 3 V to 36 V operating range accommodates industrial rails, while the -40C to +125C specification supports temperature-varying equipment. The 1.2 MHz gain-bandwidth product is sufficient for many pressure, temperature, and position sensors whose bandwidth is well below the amplifier limit. Place the amplifier close to the sensor connector, use short input traces, and bypass the supply pins locally to reduce noise coupled into high-impedance sensor lines.
সুপারিশকৃত
Process Control Feedback Loops
In control and instrumentation loops, the LM2904BIDGKR can provide error amplification, current-to-voltage conversion, and active filtering around a controller. Two independent channels allow a design to combine a sensor amplifier with an output driver or buffer. The 0.5 V/us slew rate supports low- and mid-frequency control signals, while the 36 V supply rating provides headroom for actuator interfaces. Check the common-mode range and output swing against the loop operating region, and place compensation components close to the amplifier inputs.
সুপারিশকৃত
Low-Frequency Active Filters
The LM2904BIDGKR is appropriate for first- and second-order active filters built around the Sallen-Key or multiple-feedback topologies. Its 1.2 MHz gain-bandwidth product gives ample loop-gain margin for filters whose corner frequencies remain far lower than the amplifier bandwidth. Matching resistor and capacitor values is important for accurate cutoff and gain, so use a consistent tolerance for paired components. Keep the passive network close to the amplifier pins and provide a clean ground return to reduce sensitivity to external interference.
সুপারিশকৃত
Audio Preamplification and Buffering
The LM2904BIDGKR can buffer or preamplify low-level audio signals when the required bandwidth is compatible with its 1.2 MHz gain-bandwidth product. The dual configuration supports balanced or stereo buffering without requiring two packages, and the wide 36 V supply rating permits operation from higher-voltage audio rails. Select feedback values for the intended closed-loop gain, confirm output swing at the selected supply voltage, and reference the manufacturer's stability guidance before adding large capacitive loads at the output.
সুপারিশকৃত
Voltage Monitoring and Threshold Detection
The LM2904BIDGKR is useful for amplifying a scaled sense voltage and comparing it with a reference through an external feedback network. Its two channels can handle both the sensing amplifier and threshold amplifier, while the 3 V to 36 V range accommodates supply-derived signals. Ensure the sense-node voltage remains inside the input common-mode range and account for input offset voltage when setting a precision threshold. A physical-noise margin between the operating point and threshold helps prevent repeated switching near the transition.
সুপারিশকৃত
Communications Interface Conditioning
The LM2904BIDGKR can condition slow communications, receiver, or modem signals where a wide supply range and industrial temperature operation are priorities. It is better suited to baseband and supervisory functions than to high-speed line drivers, because the gain-bandwidth product is 1.2 MHz. The dual channels allow receiver amplification and filtering in a compact area. Maintain controlled impedance paths from the connector or transceiver, guard sensitive input nodes from switching sources, and verify that the interface amplitude fits the amplifier's common-mode and output-swing limits.
সুপারিশকৃত
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা LM2904BIDGKR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | LM2904DGKR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-pin VSSOP (DGK) | 8-pin VSSOP (DGK) |
| Number of Amplifier Channels | 2 | 2 |
মূল পার্থক্যসমূহ
- Improved ESD capability within the LM2904B family (বনামLM2904DGKR)
- Wide operating temperature coverage (বনামLM2904DGKR)
- Dual general-purpose amplifier in a compact footprint (বনামLM2904DGKR)
- Higher documented gain-bandwidth product for general-purpose designs (বনামLM2904DGKR)
ডিজাইন নোট
Place the supply bypass capacitor directly beside the LM2904BIDGKR power and ground pins, and keep the loop formed by the capacitor, device pins, and ground return as small as practical. Sensitive non-inverting inputs should face away from the supply capacitor and switching-current paths. For source signals with high source impedance, keep the input traces short and consider guarding the unused channel so that board leakage does not affect the active measurement.
Do not operate the amplifier outside the 3 V to 36 V supply range or assume that the full input range is available at every supply voltage. Confirm the common-mode input range, output swing, and input offset against the circuit's minimum and maximum signal conditions. Tie both inputs of an unused channel to a valid common-mode voltage rather than leaving them open. Also avoid placing a large capacitive load directly on the output unless the configuration has been checked for stability.
The 1.2 MHz gain-bandwidth product limits the useful small-signal bandwidth, while the 0.5 V/us slew rate constrains large-signal transitions. Keep closed-loop bandwidth well below the gain-bandwidth product to maintain phase margin, and verify whether the required output amplitude and frequency combination violates the slew-rate limit. Use a grounded reference plane for analog signals, avoid routing sensitive inputs beneath digital or switching nets, and maintain a continuous return path beneath each high-impedance input trace.
The power dissipation is primarily determined by quiescent current, load current, and the voltage dropped across each amplifier channel. For a basic estimate, calculate channel dissipation as the closed-loop output swing multiplied by output current, then add the supply contribution associated with quiescent current: P_channel = VOUT x IOUT + (VS - VOUT) x IQ. Compare the resulting total with the package and board thermal limits, then reduce it through lower supply voltage, lower output current, lower quiescent current, or additional copper area.
কমপ্লায়েন্স তথ্য
The available manufacturer and distributor listings do not state the individual compliance declarations for this exact orderable MPN. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status against the current manufacturer documentation or declaration before release.