Texas Instruments

LM2904BIDGKR - Dual 36V 1.2MHz Op Amp | Texas Instruments

部品番号: LM2904BIDGKR ✓ 生産中
36 V Vdss 8-pin VSSOP (DGK) Package
MOQ: 1 |

LM2904BIDGKR 概要

The Texas Instruments LM2904BIDGKR is a dual general-purpose operational amplifier with a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and a 0.5 V/us slew rate. The device is supplied in an 8-pin VSSOP (DGK) package and is specified for operation from -40C to +125C.

An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. The dual architecture provides two independent amplifiers in one package, making the LM2904B suitable for signal conditioning, current monitoring, filtering, and general feedback-control circuits. Its position in the signal-chain hierarchy is operational amplifier, analog amplifier, analog integrated circuit, and semiconductor.

The LM2904B version provides a 3 V to 36 V operating supply range, a 1.2 MHz gain-bandwidth product, and a 0.5 V/us slew rate. The improved LM2904B family also features enhanced ESD protection relative to the original LM2904 family. These characteristics make it suitable for industrial control systems and other applications operating from industrial supply rails.

Two independent amplifier channels are provided in a compact 8-pin surface-mount package. The wide supply range allows operation from a single low-voltage rail or from split positive and negative supplies when the circuit requires them. The device is intended for general-purpose applications rather than precision instrumentation, where very low offset voltage and very low bias current would be required.

Typical uses include transducer and sensor signal conditioning, low-frequency active filters, audio and communications interface circuits, voltage monitoring, and process-control loops. Industrial instrumentation is a natural fit because the specified operating temperature reaches 125C. The 1.2 MHz bandwidth supports lower-frequency precision and control tasks rather than high-speed video or RF applications.

When designing the circuit, verify input and output common-mode limits at the selected supply voltage and provide adequate output-current headroom for the load and feedback network. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier channel should be configured with inputs tied to a valid common-mode voltage rather than left floating.

This page consolidates package, temperature, electrical-performance, and cross-reference information into an engineering-focused selection guide. It also documents verified drop-in relationships, practical layout guidance, application use cases, and parameter-level comparisons that help shorten design evaluation time.

ドロップイン代替品: LM2904BIDGKR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LM2904BIDGKR (同一形状・フットプリント) — 相違点: Amplifier Type, Gain-Bandwidth Product, Maximum Supply Voltage.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 700 kHz
Maximum Supply Voltage: 26 V
比較対象 LM2904BIDGKR →

LM2904DGKR

✅ ドロップイン
Texas Instruments
📦 8-pin VSSOP (DGK)
General-purpose operational amplifier · 2 channels · 26 V · 700 kHz · Push-pull · Extends to ground

価格はお問い合わせください

データシートを見る →

LM2904BIDGKR 最大定格&電気的特性

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Maximum Supply Voltage 36 V
Operating Supply Voltage Range 3 V to 36 V
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/us
動作温度範囲 -40C to +125C
Package Type 8-pin VSSOP (DGK)
実装タイプ Surface mount
Package Pin Count 8 pins
ESD Protection Improved ESD protection

LM2904BIDGKR 8 pins ピン配置ガイド

LM2904BIDGKR (8 pins パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

LM2904BIDGKR の 8 pins パッケージピン配置図

詳細なピン配置データはありません: LM2904BIDGKR.

詳細は データシート をご参照ください。

主な用途

LM2904BIDGKR の用途: 6 件s: Industrial Sensor Signal Conditioning, Process Control Feedback Loops, Low-Frequency Active Filters, Audio Preamplification and Buffering, Voltage Monitoring and Threshold Detection, Communications Interface Conditioning.

🏭

Industrial Sensor Signal Conditioning

The LM2904BIDGKR suits analog sensor interfaces that require two amplifiers within one compact package. Its 3 V to 36 V operating range accommodates industrial rails, while the -40C to +125C specification supports temperature-varying equipment. The 1.2 MHz gain-bandwidth product is sufficient for many pressure, temperature, and position sensors whose bandwidth is well below the amplifier limit. Place the amplifier close to the sensor connector, use short input traces, and bypass the supply pins locally to reduce noise coupled into high-impedance sensor lines.

⚡

Process Control Feedback Loops

In control and instrumentation loops, the LM2904BIDGKR can provide error amplification, current-to-voltage conversion, and active filtering around a controller. Two independent channels allow a design to combine a sensor amplifier with an output driver or buffer. The 0.5 V/us slew rate supports low- and mid-frequency control signals, while the 36 V supply rating provides headroom for actuator interfaces. Check the common-mode range and output swing against the loop operating region, and place compensation components close to the amplifier inputs.

🎛️

Low-Frequency Active Filters

The LM2904BIDGKR is appropriate for first- and second-order active filters built around the Sallen-Key or multiple-feedback topologies. Its 1.2 MHz gain-bandwidth product gives ample loop-gain margin for filters whose corner frequencies remain far lower than the amplifier bandwidth. Matching resistor and capacitor values is important for accurate cutoff and gain, so use a consistent tolerance for paired components. Keep the passive network close to the amplifier pins and provide a clean ground return to reduce sensitivity to external interference.

🎧

Audio Preamplification and Buffering

The LM2904BIDGKR can buffer or preamplify low-level audio signals when the required bandwidth is compatible with its 1.2 MHz gain-bandwidth product. The dual configuration supports balanced or stereo buffering without requiring two packages, and the wide 36 V supply rating permits operation from higher-voltage audio rails. Select feedback values for the intended closed-loop gain, confirm output swing at the selected supply voltage, and reference the manufacturer's stability guidance before adding large capacitive loads at the output.

📺

Voltage Monitoring and Threshold Detection

The LM2904BIDGKR is useful for amplifying a scaled sense voltage and comparing it with a reference through an external feedback network. Its two channels can handle both the sensing amplifier and threshold amplifier, while the 3 V to 36 V range accommodates supply-derived signals. Ensure the sense-node voltage remains inside the input common-mode range and account for input offset voltage when setting a precision threshold. A physical-noise margin between the operating point and threshold helps prevent repeated switching near the transition.

🌐

Communications Interface Conditioning

The LM2904BIDGKR can condition slow communications, receiver, or modem signals where a wide supply range and industrial temperature operation are priorities. It is better suited to baseband and supervisory functions than to high-speed line drivers, because the gain-bandwidth product is 1.2 MHz. The dual channels allow receiver amplification and filtering in a compact area. Maintain controlled impedance paths from the connector or transceiver, guard sensitive input nodes from switching sources, and verify that the interface amplitude fits the amplifier's common-mode and output-swing limits.

What is the operating voltage range of LM2904BIDGKR?
The LM2904BIDGKR operates from 3 V to 36 V. According to the Texas Instruments LM2904B product information, the device is a dual operational amplifier with a 36 V maximum supply rating and a 3 V minimum operating supply. This range supports both single-supply designs and applications that use positive and negative rails, provided the input and output signals remain within the common-mode limits for the selected supply voltage.
What are the key specifications of LM2904BIDGKR that engineers should know?
The LM2904BIDGKR is a dual, general-purpose operational amplifier rated for 3 V to 36 V operation. Its principal performance figures are a 1.2 MHz gain-bandwidth product and a 0.5 V/us slew rate. The Texas Instruments LM2904B page specifies an 8-pin VSSOP (DGK) package and an operating temperature range of -40C to +125C. These specifications position the part for general-purpose industrial signal conditioning rather than precision or high-speed amplification.
Where can I download the LM2904BIDGKR datasheet PDF?
The official LM2904BIDGKR technical information is available through the Texas Instruments LM2904B product page and the associated manufacturer documentation. Open the manufacturer part-details page for LM2904BIDGKR and use the datasheet link for the complete electrical characteristics, pin configuration, typical performance curves, and application guidance. The device is described by Texas Instruments as a dual 36 V, 1.2 MHz operational amplifier.
Where can I find the LM2904BIDGKR pinout?
The LM2904BIDGKR pin configuration is identified in the manufacturer datasheet for the DGK 8-pin VSSOP package. Use the pin-description diagram and connection table in that document when assigning PCB nets, especially because an unused amplifier input must not remain floating. The manufacturer lists the package as DGK with 8 pins, and the package drawing defines the physical orientation of those connections.
What is the LM2904BIDGKR used for?
The LM2904BIDGKR is used for general-purpose analog signal conditioning, including sensor and transducer amplification, low-frequency active filtering, voltage monitoring, and process-control feedback loops. Its two amplifier channels share one 8-pin VSSOP package, reducing board area compared with two separate single-amplifier packages. The -40C to +125C rating makes it suitable for industrial equipment where temperature variation and supply transients are expected.
Is LM2904BIDGKR suitable for industrial control systems?
Yes, the LM2904BIDGKR is well suited to industrial control systems because it operates from 3 V to 36 V across a -40C to +125C temperature range. Texas Instruments describes it as an improved dual operational amplifier with enhanced ESD protection. It is appropriate for conditioning analog sensor signals and implementing analog control loops where moderate bandwidth and general-purpose performance are sufficient.
LM2904BIDGKR vs LM2904DGKR - which is better for a new design?
The LM2904BIDGKR is generally the better choice for a new design because it is the improved LM2904B version, offering enhanced ESD protection and operation to 125C within the same 8-pin VSSOP footprint. The LM2904DGKR is the original-family part documented as the most direct replacement for the LM2904BIDGKR. For a new design requiring the improved device characteristics, choose the LM2904BIDGKR unless a legacy BOM must remain unchanged.
What is the best drop-in replacement for LM2904BIDGKR?
The LM2904DGKR is the documented same-footprint drop-in option for the LM2904BIDGKR. Texas Instruments support material identifies LM2904BIDGKR as the most direct replacement for LM2904DGKR, and both use the DGK 8-pin VSSOP configuration. Confirm the selected device's input offset, bias current, common-mode range, and temperature grade against your circuit requirements before approving the substitution.
Can the LM2904DGKR replace LM2904BIDGKR without a PCB change?
Yes, the LM2904DGKR can replace the LM2904BIDGKR without a PCB footprint change because both use the DGK 8-pin VSSOP package and the same dual-amplifier pin arrangement. The functional substitution is supported by Texas Instruments support documentation. Review the two datasheets for differences in temperature range, ESD capability, offset voltage, and electrical limits before using the older part in new production.
When should I choose LM2904BIDGKR over LM2904DGKR?
Choose the LM2904BIDGKR when the design benefits from the improved LM2904B family's enhanced ESD protection or operation across the full -40C to +125C range. Choose the LM2904DGKR mainly to maintain an existing legacy BOM or when the original LM2904 characteristics are specifically required. Both parts occupy the same 8-pin VSSOP footprint, so the decision is primarily electrical and lifecycle-related.
What is the best cross-brand equivalent for LM2904BIDGKR?
No cross-brand drop-in equivalent is established on this page because the available cross-reference results identify general replacement manufacturers and functional alternatives but do not document a specific cross-brand part number with an 8-pin VSSOP footprint and verified electrical compatibility. A functional equivalent should not be treated as a drop-in replacement without a pin-by-pin and parameter-by-parameter review. Use the manufacturer cross-reference resources to evaluate Renesas, STMicroelectronics, and other documented candidates.
How should I configure the unused amplifier channel?
The unused LM2904BIDGKR amplifier channel should be configured so that its input pins are tied to a valid common-mode voltage and its output remains stable. Do not leave either input floating, because an open input can pick up noise and cause unexpected oscillation. Follow the unused-amplifier configuration shown in the manufacturer application guidance, and verify the arrangement in the final board layout.
How much decoupling does the LM2904BIDGKR need?
Place a local bypass capacitor at each supply connection and route it through a short, low-inductance path to the appropriate power or ground pin. The exact capacitor values should follow the manufacturer's typical application circuit and the switching-noise environment of the board. Keep analog signal traces away from the supply return path, especially when the amplifier processes low-level sensor signals.
Can I use LM2904BIDGKR for audio signal conditioning?
Yes, the LM2904BIDGKR can be used for low-frequency audio preamplification, mixing, and buffering within the 1.2 MHz gain-bandwidth limit. Its 36 V rating also supports higher-voltage audio circuits, although the common-mode input range still constrains operation at low supply voltages. Use resistor- or capacitor-based gain stages that stay within the output swing and stability requirements of the device.
Is LM2904BIDGKR available for immediate order?
Current availability and delivery scheduling should be confirmed through the Request a Quote form on this page. The manufacturer lists the LM2904B as an active product family, but inventory, allocation, and lead time can vary by region and order quantity. Provide the required quantity, date code preference, and target packaging information with the quotation request to obtain a current supply commitment.
Where can I buy LM2904BIDGKR and check its current lead time?
Use the Request a Quote form on this page to request the current LM2904BIDGKR price, stock position, and lead time. The quote request is the fastest way to obtain a response tied to your required quantity, delivery location, and acceptable date-code range. The manufacturer identifies the part within the LM2904B family, so including the full MPN LM2904BIDGKR in the request avoids package or grade ambiguity.

エンジニアリング参考データ: LM2904BIDGKR — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Select the LM2904BIDGKR for new general-purpose analog designs that need two amplifier channels, a 3 V to 36 V supply range, and operation across -40C to +125C. Its 1.2 MHz gain-bandwidth product is appropriate for sensor conditioning, active filters, low-frequency audio, process-control loops, and slow communications interfaces. Choose the LM2904DGKR when maintaining an existing legacy BOM is more important than using the improved LM2904B family's ESD capability or temperature specification. Because both parts use the DGK 8-pin VSSOP configuration, the substitution does not require a PCB footprint change. Do not substitute a generic dual amplifier solely on the basis of package and channel count. For another manufacturer's equivalent, verify pin arrangement, common-mode range, output swing, offset voltage, bias current, noise, stability, and automotive qualification before approving it as a drop-in replacement.

代替品との比較

パラメータ この製品 LM2904DGKR
Brand Texas Instruments Texas Instruments
Package 8-pin VSSOP (DGK) 8-pin VSSOP (DGK)
Number of Amplifier Channels 2 2

主な差別化要因

  • Improved ESD capability within the LM2904B family (vs LM2904DGKR)
  • Wide operating temperature coverage (vs LM2904DGKR)
  • Dual general-purpose amplifier in a compact footprint (vs LM2904DGKR)
  • Higher documented gain-bandwidth product for general-purpose designs (vs LM2904DGKR)

設計ノート

Place the supply bypass capacitor directly beside the LM2904BIDGKR power and ground pins, and keep the loop formed by the capacitor, device pins, and ground return as small as practical. Sensitive non-inverting inputs should face away from the supply capacitor and switching-current paths. For source signals with high source impedance, keep the input traces short and consider guarding the unused channel so that board leakage does not affect the active measurement.

Do not operate the amplifier outside the 3 V to 36 V supply range or assume that the full input range is available at every supply voltage. Confirm the common-mode input range, output swing, and input offset against the circuit's minimum and maximum signal conditions. Tie both inputs of an unused channel to a valid common-mode voltage rather than leaving them open. Also avoid placing a large capacitive load directly on the output unless the configuration has been checked for stability.

The 1.2 MHz gain-bandwidth product limits the useful small-signal bandwidth, while the 0.5 V/us slew rate constrains large-signal transitions. Keep closed-loop bandwidth well below the gain-bandwidth product to maintain phase margin, and verify whether the required output amplitude and frequency combination violates the slew-rate limit. Use a grounded reference plane for analog signals, avoid routing sensitive inputs beneath digital or switching nets, and maintain a continuous return path beneath each high-impedance input trace.

The power dissipation is primarily determined by quiescent current, load current, and the voltage dropped across each amplifier channel. For a basic estimate, calculate channel dissipation as the closed-loop output swing multiplied by output current, then add the supply contribution associated with quiescent current: P_channel = VOUT x IOUT + (VS - VOUT) x IQ. Compare the resulting total with the package and board thermal limits, then reduce it through lower supply voltage, lower output current, lower quiescent current, or additional copper area.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available manufacturer and distributor listings do not state the individual compliance declarations for this exact orderable MPN. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status against the current manufacturer documentation or declaration before release.

関連検索

LM2904BIDGKR LM2904BIDGKR datasheet LM2904BIDGKR datasheet pdf LM2904BIDGKR pinout Texas Instruments LM2904BIDGKR LM2904B DGK 8-pin VSSOP LM2904BIDGKR equivalent LM2904BIDGKR replacement LM2904BIDGKR vs LM2904DGKR LM2904BIDGKR price LM2904BIDGKR stock LM2904BIDGKR application circuit LM2904B 36V 1.2MHz op amp what can replace LM2904BIDGKR

関連部品&用語

Texas Instruments LM2904BIDGKR LM2904DGKR LM2904B LM2904 dual operational amplifier operational amplifier analog amplifier analog integrated circuit semiconductor general-purpose signal conditioning gain-bandwidth product slew rate common-mode input range input offset voltage input bias current ESD protection 8-pin VSSOP DGK package surface-mount package industrial control systems sensor interface active filter process control RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示