Texas Instruments

LM2904BIDGKR - Dual 36V 1.2MHz Op Amp | Texas Instruments

MPN: LM2904BIDGKR ✓ 啟用中
36 V Vdss 8-pin VSSOP (DGK) Package
MOQ: 1 |

LM2904BIDGKR 概覽

The Texas Instruments LM2904BIDGKR is a dual general-purpose operational amplifier with a 36 V maximum supply rating, a 1.2 MHz gain-bandwidth product, and a 0.5 V/us slew rate. The device is supplied in an 8-pin VSSOP (DGK) package and is specified for operation from -40C to +125C.

An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs. The dual architecture provides two independent amplifiers in one package, making the LM2904B suitable for signal conditioning, current monitoring, filtering, and general feedback-control circuits. Its position in the signal-chain hierarchy is operational amplifier, analog amplifier, analog integrated circuit, and semiconductor.

The LM2904B version provides a 3 V to 36 V operating supply range, a 1.2 MHz gain-bandwidth product, and a 0.5 V/us slew rate. The improved LM2904B family also features enhanced ESD protection relative to the original LM2904 family. These characteristics make it suitable for industrial control systems and other applications operating from industrial supply rails.

Two independent amplifier channels are provided in a compact 8-pin surface-mount package. The wide supply range allows operation from a single low-voltage rail or from split positive and negative supplies when the circuit requires them. The device is intended for general-purpose applications rather than precision instrumentation, where very low offset voltage and very low bias current would be required.

Typical uses include transducer and sensor signal conditioning, low-frequency active filters, audio and communications interface circuits, voltage monitoring, and process-control loops. Industrial instrumentation is a natural fit because the specified operating temperature reaches 125C. The 1.2 MHz bandwidth supports lower-frequency precision and control tasks rather than high-speed video or RF applications.

When designing the circuit, verify input and output common-mode limits at the selected supply voltage and provide adequate output-current headroom for the load and feedback network. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier channel should be configured with inputs tied to a valid common-mode voltage rather than left floating.

This page consolidates package, temperature, electrical-performance, and cross-reference information into an engineering-focused selection guide. It also documents verified drop-in relationships, practical layout guidance, application use cases, and parameter-level comparisons that help shorten design evaluation time.

直接替換替代品,適用於 LM2904BIDGKR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2904BIDGKR (相同外形與佔位) — 差異在於 Amplifier Type, Gain-Bandwidth Product, Maximum Supply Voltage.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 700 kHz
Maximum Supply Voltage: 26 V
比較對象 LM2904BIDGKR →

LM2904DGKR

✅ 直接替換
Texas Instruments
📦 8-pin VSSOP (DGK)
General-purpose operational amplifier · 2 channels · 26 V · 700 kHz · Push-pull · Extends to ground

聯絡詢價

查看資料表 →

LM2904BIDGKR 最大額定值與電氣特性

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Maximum Supply Voltage 36 V
Operating Supply Voltage Range 3 V to 36 V
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/us
工作溫度範圍 -40C to +125C
Package Type 8-pin VSSOP (DGK)
安裝類型 Surface mount
Package Pin Count 8 pins
ESD Protection Improved ESD protection

LM2904BIDGKR 8 pins 腳位配置指南

LM2904BIDGKR(8 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LM2904BIDGKR 的 8 pins 封裝腳位圖

無詳細腳位定義資料: LM2904BIDGKR.

請參閱 資料表 以查看完整腳位配置。

典型應用

LM2904BIDGKR 適用於 6 應用s: Industrial Sensor Signal Conditioning, Process Control Feedback Loops, Low-Frequency Active Filters, Audio Preamplification and Buffering, Voltage Monitoring and Threshold Detection, Communications Interface Conditioning.

🏭

Industrial Sensor Signal Conditioning

The LM2904BIDGKR suits analog sensor interfaces that require two amplifiers within one compact package. Its 3 V to 36 V operating range accommodates industrial rails, while the -40C to +125C specification supports temperature-varying equipment. The 1.2 MHz gain-bandwidth product is sufficient for many pressure, temperature, and position sensors whose bandwidth is well below the amplifier limit. Place the amplifier close to the sensor connector, use short input traces, and bypass the supply pins locally to reduce noise coupled into high-impedance sensor lines.

⚡

Process Control Feedback Loops

In control and instrumentation loops, the LM2904BIDGKR can provide error amplification, current-to-voltage conversion, and active filtering around a controller. Two independent channels allow a design to combine a sensor amplifier with an output driver or buffer. The 0.5 V/us slew rate supports low- and mid-frequency control signals, while the 36 V supply rating provides headroom for actuator interfaces. Check the common-mode range and output swing against the loop operating region, and place compensation components close to the amplifier inputs.

🎛️

Low-Frequency Active Filters

The LM2904BIDGKR is appropriate for first- and second-order active filters built around the Sallen-Key or multiple-feedback topologies. Its 1.2 MHz gain-bandwidth product gives ample loop-gain margin for filters whose corner frequencies remain far lower than the amplifier bandwidth. Matching resistor and capacitor values is important for accurate cutoff and gain, so use a consistent tolerance for paired components. Keep the passive network close to the amplifier pins and provide a clean ground return to reduce sensitivity to external interference.

🎧

Audio Preamplification and Buffering

The LM2904BIDGKR can buffer or preamplify low-level audio signals when the required bandwidth is compatible with its 1.2 MHz gain-bandwidth product. The dual configuration supports balanced or stereo buffering without requiring two packages, and the wide 36 V supply rating permits operation from higher-voltage audio rails. Select feedback values for the intended closed-loop gain, confirm output swing at the selected supply voltage, and reference the manufacturer's stability guidance before adding large capacitive loads at the output.

📺

Voltage Monitoring and Threshold Detection

The LM2904BIDGKR is useful for amplifying a scaled sense voltage and comparing it with a reference through an external feedback network. Its two channels can handle both the sensing amplifier and threshold amplifier, while the 3 V to 36 V range accommodates supply-derived signals. Ensure the sense-node voltage remains inside the input common-mode range and account for input offset voltage when setting a precision threshold. A physical-noise margin between the operating point and threshold helps prevent repeated switching near the transition.

🌐

Communications Interface Conditioning

The LM2904BIDGKR can condition slow communications, receiver, or modem signals where a wide supply range and industrial temperature operation are priorities. It is better suited to baseband and supervisory functions than to high-speed line drivers, because the gain-bandwidth product is 1.2 MHz. The dual channels allow receiver amplification and filtering in a compact area. Maintain controlled impedance paths from the connector or transceiver, guard sensitive input nodes from switching sources, and verify that the interface amplitude fits the amplifier's common-mode and output-swing limits.

What is the operating voltage range of LM2904BIDGKR?
The LM2904BIDGKR operates from 3 V to 36 V. According to the Texas Instruments LM2904B product information, the device is a dual operational amplifier with a 36 V maximum supply rating and a 3 V minimum operating supply. This range supports both single-supply designs and applications that use positive and negative rails, provided the input and output signals remain within the common-mode limits for the selected supply voltage.
What are the key specifications of LM2904BIDGKR that engineers should know?
The LM2904BIDGKR is a dual, general-purpose operational amplifier rated for 3 V to 36 V operation. Its principal performance figures are a 1.2 MHz gain-bandwidth product and a 0.5 V/us slew rate. The Texas Instruments LM2904B page specifies an 8-pin VSSOP (DGK) package and an operating temperature range of -40C to +125C. These specifications position the part for general-purpose industrial signal conditioning rather than precision or high-speed amplification.
Where can I download the LM2904BIDGKR datasheet PDF?
The official LM2904BIDGKR technical information is available through the Texas Instruments LM2904B product page and the associated manufacturer documentation. Open the manufacturer part-details page for LM2904BIDGKR and use the datasheet link for the complete electrical characteristics, pin configuration, typical performance curves, and application guidance. The device is described by Texas Instruments as a dual 36 V, 1.2 MHz operational amplifier.
Where can I find the LM2904BIDGKR pinout?
The LM2904BIDGKR pin configuration is identified in the manufacturer datasheet for the DGK 8-pin VSSOP package. Use the pin-description diagram and connection table in that document when assigning PCB nets, especially because an unused amplifier input must not remain floating. The manufacturer lists the package as DGK with 8 pins, and the package drawing defines the physical orientation of those connections.
What is the LM2904BIDGKR used for?
The LM2904BIDGKR is used for general-purpose analog signal conditioning, including sensor and transducer amplification, low-frequency active filtering, voltage monitoring, and process-control feedback loops. Its two amplifier channels share one 8-pin VSSOP package, reducing board area compared with two separate single-amplifier packages. The -40C to +125C rating makes it suitable for industrial equipment where temperature variation and supply transients are expected.
Is LM2904BIDGKR suitable for industrial control systems?
Yes, the LM2904BIDGKR is well suited to industrial control systems because it operates from 3 V to 36 V across a -40C to +125C temperature range. Texas Instruments describes it as an improved dual operational amplifier with enhanced ESD protection. It is appropriate for conditioning analog sensor signals and implementing analog control loops where moderate bandwidth and general-purpose performance are sufficient.
LM2904BIDGKR vs LM2904DGKR - which is better for a new design?
The LM2904BIDGKR is generally the better choice for a new design because it is the improved LM2904B version, offering enhanced ESD protection and operation to 125C within the same 8-pin VSSOP footprint. The LM2904DGKR is the original-family part documented as the most direct replacement for the LM2904BIDGKR. For a new design requiring the improved device characteristics, choose the LM2904BIDGKR unless a legacy BOM must remain unchanged.
What is the best drop-in replacement for LM2904BIDGKR?
The LM2904DGKR is the documented same-footprint drop-in option for the LM2904BIDGKR. Texas Instruments support material identifies LM2904BIDGKR as the most direct replacement for LM2904DGKR, and both use the DGK 8-pin VSSOP configuration. Confirm the selected device's input offset, bias current, common-mode range, and temperature grade against your circuit requirements before approving the substitution.
Can the LM2904DGKR replace LM2904BIDGKR without a PCB change?
Yes, the LM2904DGKR can replace the LM2904BIDGKR without a PCB footprint change because both use the DGK 8-pin VSSOP package and the same dual-amplifier pin arrangement. The functional substitution is supported by Texas Instruments support documentation. Review the two datasheets for differences in temperature range, ESD capability, offset voltage, and electrical limits before using the older part in new production.
When should I choose LM2904BIDGKR over LM2904DGKR?
Choose the LM2904BIDGKR when the design benefits from the improved LM2904B family's enhanced ESD protection or operation across the full -40C to +125C range. Choose the LM2904DGKR mainly to maintain an existing legacy BOM or when the original LM2904 characteristics are specifically required. Both parts occupy the same 8-pin VSSOP footprint, so the decision is primarily electrical and lifecycle-related.
What is the best cross-brand equivalent for LM2904BIDGKR?
No cross-brand drop-in equivalent is established on this page because the available cross-reference results identify general replacement manufacturers and functional alternatives but do not document a specific cross-brand part number with an 8-pin VSSOP footprint and verified electrical compatibility. A functional equivalent should not be treated as a drop-in replacement without a pin-by-pin and parameter-by-parameter review. Use the manufacturer cross-reference resources to evaluate Renesas, STMicroelectronics, and other documented candidates.
How should I configure the unused amplifier channel?
The unused LM2904BIDGKR amplifier channel should be configured so that its input pins are tied to a valid common-mode voltage and its output remains stable. Do not leave either input floating, because an open input can pick up noise and cause unexpected oscillation. Follow the unused-amplifier configuration shown in the manufacturer application guidance, and verify the arrangement in the final board layout.
How much decoupling does the LM2904BIDGKR need?
Place a local bypass capacitor at each supply connection and route it through a short, low-inductance path to the appropriate power or ground pin. The exact capacitor values should follow the manufacturer's typical application circuit and the switching-noise environment of the board. Keep analog signal traces away from the supply return path, especially when the amplifier processes low-level sensor signals.
Can I use LM2904BIDGKR for audio signal conditioning?
Yes, the LM2904BIDGKR can be used for low-frequency audio preamplification, mixing, and buffering within the 1.2 MHz gain-bandwidth limit. Its 36 V rating also supports higher-voltage audio circuits, although the common-mode input range still constrains operation at low supply voltages. Use resistor- or capacitor-based gain stages that stay within the output swing and stability requirements of the device.
Is LM2904BIDGKR available for immediate order?
Current availability and delivery scheduling should be confirmed through the Request a Quote form on this page. The manufacturer lists the LM2904B as an active product family, but inventory, allocation, and lead time can vary by region and order quantity. Provide the required quantity, date code preference, and target packaging information with the quotation request to obtain a current supply commitment.
Where can I buy LM2904BIDGKR and check its current lead time?
Use the Request a Quote form on this page to request the current LM2904BIDGKR price, stock position, and lead time. The quote request is the fastest way to obtain a response tied to your required quantity, delivery location, and acceptable date-code range. The manufacturer identifies the part within the LM2904B family, so including the full MPN LM2904BIDGKR in the request avoids package or grade ambiguity.

工程參考資料,適用於 LM2904BIDGKR — 比較、設計指引及合規資訊。

選型指南

Select the LM2904BIDGKR for new general-purpose analog designs that need two amplifier channels, a 3 V to 36 V supply range, and operation across -40C to +125C. Its 1.2 MHz gain-bandwidth product is appropriate for sensor conditioning, active filters, low-frequency audio, process-control loops, and slow communications interfaces. Choose the LM2904DGKR when maintaining an existing legacy BOM is more important than using the improved LM2904B family's ESD capability or temperature specification. Because both parts use the DGK 8-pin VSSOP configuration, the substitution does not require a PCB footprint change. Do not substitute a generic dual amplifier solely on the basis of package and channel count. For another manufacturer's equivalent, verify pin arrangement, common-mode range, output swing, offset voltage, bias current, noise, stability, and automotive qualification before approving it as a drop-in replacement.

與替代品比較

參數 本產品 LM2904DGKR
Brand Texas Instruments Texas Instruments
Package 8-pin VSSOP (DGK) 8-pin VSSOP (DGK)
Number of Amplifier Channels 2 2

主要差異化特點

  • Improved ESD capability within the LM2904B family (對比LM2904DGKR)
  • Wide operating temperature coverage (對比LM2904DGKR)
  • Dual general-purpose amplifier in a compact footprint (對比LM2904DGKR)
  • Higher documented gain-bandwidth product for general-purpose designs (對比LM2904DGKR)

設計說明

Place the supply bypass capacitor directly beside the LM2904BIDGKR power and ground pins, and keep the loop formed by the capacitor, device pins, and ground return as small as practical. Sensitive non-inverting inputs should face away from the supply capacitor and switching-current paths. For source signals with high source impedance, keep the input traces short and consider guarding the unused channel so that board leakage does not affect the active measurement.

Do not operate the amplifier outside the 3 V to 36 V supply range or assume that the full input range is available at every supply voltage. Confirm the common-mode input range, output swing, and input offset against the circuit's minimum and maximum signal conditions. Tie both inputs of an unused channel to a valid common-mode voltage rather than leaving them open. Also avoid placing a large capacitive load directly on the output unless the configuration has been checked for stability.

The 1.2 MHz gain-bandwidth product limits the useful small-signal bandwidth, while the 0.5 V/us slew rate constrains large-signal transitions. Keep closed-loop bandwidth well below the gain-bandwidth product to maintain phase margin, and verify whether the required output amplitude and frequency combination violates the slew-rate limit. Use a grounded reference plane for analog signals, avoid routing sensitive inputs beneath digital or switching nets, and maintain a continuous return path beneath each high-impedance input trace.

The power dissipation is primarily determined by quiescent current, load current, and the voltage dropped across each amplifier channel. For a basic estimate, calculate channel dissipation as the closed-loop output swing multiplied by output current, then add the supply contribution associated with quiescent current: P_channel = VOUT x IOUT + (VS - VOUT) x IQ. Compare the resulting total with the package and board thermal limits, then reduce it through lower supply voltage, lower output current, lower quiescent current, or additional copper area.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available manufacturer and distributor listings do not state the individual compliance declarations for this exact orderable MPN. Confirm RoHS, REACH, halogen-free, conflict-minerals, and automotive-qualification status against the current manufacturer documentation or declaration before release.

相關搜尋

LM2904BIDGKR LM2904BIDGKR datasheet LM2904BIDGKR datasheet pdf LM2904BIDGKR pinout Texas Instruments LM2904BIDGKR LM2904B DGK 8-pin VSSOP LM2904BIDGKR equivalent LM2904BIDGKR replacement LM2904BIDGKR vs LM2904DGKR LM2904BIDGKR price LM2904BIDGKR stock LM2904BIDGKR application circuit LM2904B 36V 1.2MHz op amp what can replace LM2904BIDGKR

相關元件與詞彙

Texas Instruments LM2904BIDGKR LM2904DGKR LM2904B LM2904 dual operational amplifier operational amplifier analog amplifier analog integrated circuit semiconductor general-purpose signal conditioning gain-bandwidth product slew rate common-mode input range input offset voltage input bias current ESD protection 8-pin VSSOP DGK package surface-mount package industrial control systems sensor interface active filter process control RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情