Products (44,000+)

MAX232AESE+ - Dual RS-232 Transceiver in SOIC-16 | Maxim
MAX232AESE+

MAX232AESE+ - Dual RS-232 Transceiver in SOIC-16 | Maxim

The Maxim Integrated MAX232AESE+ is a +5 V-powered RS-232 driver/receiver IC with two drivers and two receivers in a 16-pin SOIC package. Its 4.5 V to 5.5 V supply range, dual-channel signal-path arrangement, and 3.90 mm-wide SOIC-16 package make it suitable for conventional serial-interface equipment. An RS-232 transceiver is an interface IC that combines line drivers and receivers for bidirectional serial communication. The MAX220 through MAX249 family is designed for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly systems in which approximately ±12 V is unavailable. The MAX232AESE+ implements this interface function with a single +5 V supply while providing separate transmit and receive channels. The device includes two RS-232 drivers and two receivers, giving the system two driver channels and two receiver channels in one package. Its specified 4.5 V to 5.5 V operating-supply range supports regulated 5 V system rails. A 16-SOIC package allows use of familiar PCB routing and assembly practices, while its 3.90 mm package width fits standard narrow-body SOIC board layouts. The MAX232A family is part of Maxim Integrated's +5 V-powered multichannel RS-232 portfolio. A single IC can support two transmit paths and two receive paths, reducing the number of separate interface components required in multi-channel equipment. The product description identifies the MAX232A device family as production and associates the MAX232A with +5 V-powered multichannel RS-232 drivers and receivers. Typical uses include service-console connections, configuration interfaces, industrial-control links, test equipment, and embedded systems that require a wired RS-232 port. In these applications, the two transmitter channels can carry command or data signals, while the two receiver channels can accept responses or status information. The same IC can also be used where only one direction of communication is required, leaving additional channels available for future expansion or control signals. When laying out a board around the MAX232AESE+, place charge-pump support capacitors and interface-network components close to their associated pins, and keep the RS-232 connector-side traces away from sensitive analog and digital timing circuitry. Confirm the external capacitor values, line-driver load assumptions, and protection requirements against the manufacturer datasheet before releasing the PCB layout. This page combines the manufacturer product information, distributor package and availability details, cross-reference findings, a parameter comparison, and practical interface-design guidance. It is intended to accelerate component identification and replacement planning while preserving the distinction between a verified pin-compatible substitute and a merely functional alternative.

RFQ Contact
MAX232AEUE+ - 5V RS-232 Transceiver | Analog Devices
MAX232AEUE+

MAX232AEUE+ - 5V RS-232 Transceiver | Analog Devices

The Analog Devices MAX232AEUE+ is a +5 V-powered, 2-driver/2-receiver RS-232 transceiver packaged in a 16-pin TSSOP. It provides a full RS-232 interface for systems that need bidirectional serial communication over single-ended, unbalanced lines. The device operates from a 4.5 V to 5.5 V supply and is identified by Analog Devices as a production part in the MAX232A family. Its compact surface-mount package suits industrial controllers, data-acquisition equipment, service interfaces, and embedded systems where board area is constrained. An RS-232 transceiver is an interface IC that combines line drivers and line receivers with the charge-pump circuitry required to generate the positive and negative voltages used by RS-232 ports. A transmitter converts logic-level signals into RS-232 levels, while a receiver converts RS-232 inputs back into logic levels. The MAX232AEUE+ therefore provides a complete point-to-point or multipoint serial interface in one device rather than requiring separate driver and receiver components. The principal configuration is two transmit channels and two receive channels, allowing two serial directions or four available driver or receiver channels when only unidirectional operation is required. Because it is a full RS-232 implementation rather than an RS-422 or RS-485 interface, designers must account for RS-232 voltage levels, grounding, cable length, transient exposure, and point-to-point communication topology when planning the port. The exact driver and receiver data rates, loopback behavior, input levels, and shutdown characteristics should be confirmed from the MAX232A manufacturer datasheet. The MAX232AEUE+ uses the MAX232A family's integrated charge-pump approach to develop the bipolar voltage swings required by RS-232 without requiring a separate negative supply. This internal arrangement reduces the external support circuitry relative to a discrete transmitter implementation, although charge-pump capacitors and interface protection still require careful layout. As a 5 V interface IC, it is designed to connect CMOS or TTL-level digital circuitry to an RS-232 port through appropriate signal conditioning and protection. Typical applications include programming and configuration ports in embedded instruments, industrial control modules, laboratory data loggers, point-of-sale equipment, and serial adapters. Two transmitter and two receiver channels also support mirrored communication links or multiple RS-232 lines when the system architecture permits. For short-distance point-to-point links, the device can form the central electrical interface between a host UART and a remote peripheral, with grounding and surge protection handled at the connector. PCB placement should minimize trace length between the MAX232AEUE+, its charge-pump capacitors, and the protection network at the RS-232 connector. Keep the interface return path continuous, use a suitable ground reference, and place transient-protection devices close to the connector. Confirm the pinout, capacitor values, and recommended layout directly in the manufacturer datasheet before fabrication because the exact connector and protection topology depend on cable exposure. This product page combines the exact MAX232AEUE+ ordering information with the verified 16-pin TSSOP package, 4.5 V to 5.5 V operating range, production status, and package-level drop-in comparison. It also organizes procurement, replacement, application, and design guidance so engineers can evaluate the transceiver before committing a board layout.

RFQ Contact
MAX232AEUE+T 5V RS-232 Transceiver | Analog Devices
MAX232AEUE+T

MAX232AEUE+T 5V RS-232 Transceiver | Analog Devices

Analog Devices MAX232AEUE+T is a +5 V-powered, dual transmitter/receiver RS-232 interface IC packaged in a 16-pin TSSOP. It provides two full-duplex RS-232 driver channels and two receiver channels for translating between TTL/CMOS logic levels and balanced, bipolar RS-232 signals. The device is intended for EIA/TIA-232E, V.28, and V.24 communications interfaces where +12 V and -12 V supplies are unavailable. An RS-232 transceiver is an interface IC that bridges digital logic and a serial communications port. The transmitter converts TTL/CMOS signals into RS-232 levels, while the receiver converts RS-232 inputs into logic-compatible signals. In the broader device hierarchy, the MAX232AEUE+T belongs to the line-driver/receiver class, interface IC family, and semiconductor category used to connect a UART or other digital controller to an RS-232 port. The MAX232AEUE+T is identified as a 2/2 full-RS-232 transceiver, meaning that it contains two driver outputs and two receiver inputs. Its +5 V supply operation allows implementation around conventional 5 V digital systems. The MAX232A family is listed in production, and the 16-pin TSSOP package is approximately 4.40 mm wide. Its dual-channel arrangement is useful where two serial ports must share a compact board footprint. The manufacturer describes the MAX220 through MAX249 family as supporting EIA/TIA-232E and V.28/V.24 interfaces, especially where positive and negative 12 V rails are not available. The MAX232A therefore concentrates the RS-232 electrical layer beneath an existing UART or microprocessor serial interface. Exact slew rate, propagation delay, receiver thresholds, and charge-pump capacitor requirements should be confirmed in the MAX232A data sheet before a new circuit is released. Typical uses include industrial serial adapters, laboratory instrument interfaces, configuration ports, embedded equipment links, and legacy computer peripherals. The two transmitters and two receivers permit full-duplex communication on each RS-232 channel. Board-level design must preserve the required charge-pump capacitors, logic-side supply decoupling, and clearances between logic and high-voltage RS-232 nets. Keep input and output transceivers close to their associated connector or signal source, and route differential RS-232 traces away from sensitive clocks and analog signals. Confirm the package pin numbering against the MAX232A data sheet before assigning PCB nets. The narrow TSSOP body also requires careful assembly planning because its lead pitch and body width leave limited routing space. This page organizes the verified MAX232A family information, exact MAX232AEUE+T package identification, sourcing details, interface standards, and replacement considerations into an engineering-focused reference. It also distinguishes the directly documented device from related family members whose package, channel count, or electrical details differ.

RFQ Contact
MAX232AEWE+ - 200kb/s Dual RS-232 Transceiver | Analog Devices
MAX232AEWE+

MAX232AEWE+ - 200kb/s Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX232AEWE+ is a +5 V-powered, 2/2 full-duplex RS-232 transceiver with a maximum data rate of 200 kb/s, housed in a 16-pin SOIC package measuring 0.295 inch, or 7.50 mm, in body width. It integrates two RS-232 drivers and two receivers for translating between TTL/CMOS logic levels and bipolar RS-232 signal levels. An RS-232 transceiver is an interface IC that bridges modern digital logic and the voltage-defined RS-232 serial bus. Its transmitter converts low-voltage logic signals into RS-232-compatible levels, while its receiver converts RS-232 inputs back into logic-compatible signals. Within the broader semiconductor hierarchy, the MAX232AEWE+ is an interface IC, a line-driver and receiver device, and a single-supply communications transceiver. The principal feature set includes two driver channels, two receiver channels, full-duplex operation, a +5 V supply, and operation up to 200 kb/s. These characteristics make it suitable for equipment that needs bidirectional serial connectivity without implementing separate level-shifting circuits for each direction. The SOIC-16 form factor also supports conventional surface-mount PCB assembly. MAX232A devices use Maxim's RS-232 interface architecture to support EIA/TIA-232E and V.28/V.24-style communications interfaces. The MAX232AEWE+ operates from a single +5 V rail, allowing the logic-side system to use the same supply as many conventional embedded controllers. Its integrated transmitter and receiver functions make pin and component planning simpler than a discrete bidirectional level-shifter arrangement. Typical applications include serial service ports, data-acquisition equipment, industrial controllers, test-and-measurement instruments, and embedded systems that exchange RS-232 commands or data with a host computer. The 200 kb/s maximum rate supports legacy serial links while remaining suitable for moderate-throughput control and monitoring traffic. Firmware must configure the host and peripheral for the same baud rate, framing, parity, and handshaking method. PCB design should place charge-pump and interface capacitors close to their specified pins, maintain short return paths, and provide suitable protection for exposed external cables. Signal integrity and ESD performance depend on connector placement, grounding, transmission-line geometry, and the protection network rather than on the IC alone. This product page consolidates the MAX232AEWE+ electrical identity, package information, verified cross-reference options, application guidance, and practical PCB considerations to support faster component selection and first-board bring-up.

RFQ Contact
MAX232AEWE+T - +5V 2/2 RS-232 Transceiver | Analog Devices
MAX232AEWE+T

MAX232AEWE+T - +5V 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232AEWE+T is a +5 V-powered, 2/2 RS-232 transceiver in a 16-SOIC package. It combines two RS-232 drivers and two receivers, supports full-duplex serial communication, and is designed for EIA/TIA-232E and V.28/V.24 interfaces. The MAX232AEWE+T variant belongs to the MAX232A family, which uses a higher slew rate for improved interface performance. An RS-232 transceiver is an interface IC that translates between single-ended, bipolar RS-232 signals and logic-level digital signals. The receiver converts an RS-232 input into a CMOS-compatible logic level, while the driver converts a logic-level input into an RS-232 output. In the broader hierarchy, the MAX232AEWE+T is an interface transceiver, a communication IC, and a semiconductor designed to bridge a host UART and an RS-232 physical layer. The device provides two driver channels and two receiver channels in one package. Its +5 V supply arrangement simplifies use in conventional +5 V embedded systems, while integrated level translation eliminates separate RS-232 line drivers and receivers. The MAX232A designation also identifies a higher-slew-rate implementation intended for RS-232 applications requiring improved transition behavior compared with the base MAX232 family. The MAX232AEWE+T is suitable for EIA/TIA-232E and V.28/V.24 communication interfaces. Its 16-SOIC package permits conventional surface-mount assembly and provides enough pins for two transmit channels, two receive channels, supply connections, ground, and the internal charge-pump components. Because RS-232 is a single-ended interface, the supply and signal-return ground path must be managed carefully in systems with long cables or significant ground-potential differences. Typical applications include industrial serial consoles, point-of-sale equipment, data-acquisition systems, embedded control boards, and legacy peripheral connections. It can connect a UART-equipped microcontroller, DSP, or field-programmable logic device to an RS-232 port while limiting the design to one interface IC rather than separate line-driver and receiver packages. PCB implementation should follow the charge-pump capacitor requirements and layout guidance in the manufacturer datasheet. Place the required capacitors close to their associated pins, maintain a continuous ground reference, and route the RS-232 cable-side traces away from sensitive digital and analog nets. Verify the complete interface against the intended baud rate, cable length, and grounding topology before production release. This product page combines the MAX232AEWE+T family specifications with same-package alternatives, application guidance, and design notes intended to help engineers select and implement the interface efficiently.

RFQ Contact
MAX232AMJE - 5V RS-232 Transceiver | Maxim Integrated
MAX232AMJE

MAX232AMJE - 5V RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX232AMJE is a 5 V-powered RS-232 line-driver and receiver transceiver with two transmit channels, two receive channels, and a 200 kbps data rate in a 16-pin CERDIP package. It converts logic-level UART signals to RS-232 bipolar levels and converts incoming RS-232 signals back to CMOS-compatible logic levels. The charge-pump design generates positive and negative transmission voltages without requiring a separate ±12 V supply. An RS-232 transceiver is an interface IC within the broader communication-IC and interface-controller hierarchy. It provides the electrical conversion between single-ended digital logic and the bipolar voltage signaling used by RS-232 equipment. This makes the MAX232AMJE suitable for connecting a host, controller, or embedded processor to a serial port, diagnostic interface, industrial control system, or other RS-232 peer. The MAX232AMJE operates from a single 5 V supply and uses 0.1 µF external charge-pump capacitors, according to the Maxim Integrated manufacturer datasheet. Its two-driver, two-receiver arrangement supports two RS-232 channels in one package. The 200 kbps signaling rate is suitable for standard asynchronous serial communication while also providing margin for many industrial-control, instrumentation, and embedded service interfaces. Technically, the integrated charge pumps generate the bipolar voltages required by RS-232 while the drivers add level translation and the receivers provide thresholded noise immunity. The MAX232AMJE family is intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where ±12 V is unavailable. Its 16-pin CERDIP construction is appropriate for through-hole industrial, telecommunications, and legacy equipment designs. Typical uses include PC-compatible serial ports, embedded UART links, industrial controllers, test equipment, and service-console connections. In each case, the host UART connects to the logic-side pins while the RS-232 line driver pins connect through the intended cable or connector arrangement. Because RS-232 is point-to-point, each driver should connect to one receiver rather than a multi-drop bus. When laying out the circuit, place the 0.1 µF charge-pump capacitors close to their designated pins and keep the transceiver away from high-current switching nodes. Confirm line protection, ground reference, and connector pin assignment before energizing the interface. The MAX232 family is listed in production by the manufacturer, and its long-standing through-hole package remains useful for replacement and legacy-system maintenance. This page combines the device specifications, confirmed package information, practical interface guidance, and a focused same-package replacement comparison. It is intended to help engineers identify the correct MAX232 family member, plan the charge-pump network, and evaluate drop-in options for a 16-pin through-hole RS-232 design.

RFQ Contact
MAX232BASE+ 2/2 RS-232 Transceiver, 5V | Analog Devices
MAX232BASE+

MAX232BASE+ 2/2 RS-232 Transceiver, 5V | Analog Devices

The Analog Devices MAX232BASE+ is a dual RS-232 transceiver containing two drivers and two receivers, powered from a single 5 V supply and housed in a 16-pin SOIC package. It uses an on-chip capacitive voltage generator to produce the positive and negative voltages required by the TIA/EIA-232-F interface. Each receiver converts an RS-232 input into a 5 V TTL/CMOS logic level, while each driver converts a TTL/CMOS input into a compliant RS-232 voltage. An RS-232 transceiver is an interface IC within the broader hierarchy of interface ICs, serial communication ICs, and semiconductors. It bridges the voltage-domain difference between ordinary digital logic and the bipolar signal levels used by RS-232 links. This conversion allows equipment with a 5 V UART, microcontroller, or general-purpose logic port to communicate with legacy computers, industrial controllers, test systems, and other equipment using the RS-232 standard. The MAX232BASE+ integrates four key interface functions: two line drivers and two line receivers. Its capacitive voltage generator allows a single +5 V supply to produce the positive and negative voltage levels needed by the drivers. According to the manufacturer datasheet, receiver logic threshold is typically 1.3 V with approximately 0.5 V of typical hysteresis. The receivers can also accept inputs up to ±30 V, providing tolerance for RS-232 voltage excursions. The device's architecture combines TTL/CMOS-compatible logic-side signals with charge-pump-generated RS-232 levels. The charge pump requires external capacitors, while the receiver and driver sections perform level translation independently. This allows two bidirectional RS-232 channels to be implemented with one 16-pin device. Because the MAX232BASE+ operates from 5 V, it integrates naturally with 5 V UART logic without a separate negative supply for the interface converter. Typical applications include legacy PC serial-port interfaces, industrial control panels, instrumentation, laboratory equipment, and embedded systems that retain an RS-232 connector. The MAX232BASE+ is especially useful when the host controller uses 5 V logic and the board requires two RS-232 lines rather than a larger multichannel transceiver. Its 16-pin SOIC package also allows a direct replacement strategy when the footprint and electrical behavior match. Circuit design must provide the charge-pump capacitors and input/output bypass capacitance specified by the manufacturer datasheet. Keep the charge-pump loop compact because those pins carry high-frequency AC current. Connect the logic ground and interface-ground reference as directed by the device documentation, and route the RS-232 connector-side traces away from sensitive analog and clock circuitry to reduce noise pickup. This page combines the confirmed device specifications, drop-in replacement candidates, package details, and practical circuit guidance for engineers evaluating the MAX232BASE+. It is intended to help with initial design selection, replacement planning, and PCB implementation rather than replace the complete pin-description table, ordering information, or absolute-maximum-rating tables in the manufacturer documentation.

RFQ Contact
MAX232BASE+T - 5V 2/2 RS-232 Transceiver | Analog Devices
MAX232BASE+T

MAX232BASE+T - 5V 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232BASE+T is a 5 V RS-232 transceiver containing two drivers and two receivers in a 16-pin SOIC package. It supports data rates up to 200 kbps over a 4.5 V to 5.5 V supply range and operates from 0°C to +70°C. The device uses on-chip charge-pump circuitry to convert TTL/CMOS logic levels into RS-232 bipolar levels and to receive RS-232 signals without requiring a separate negative supply. An RS-232 transceiver is a bridge between a digital controller and a physical serial interface. Within the signal-chain hierarchy, it belongs to the interface-IC class, sits below RS-232 line drivers and receivers, and connects digital logic such as a microcontroller UART to external equipment. The MAX232BASE+T implements the full-duplex portion of that interface with two transmit channels and two receive channels, making it suitable for legacy ports, service consoles, industrial control links, and equipment built around PC-compatible serial communication. Key characteristics include a 200 kbps maximum data rate, 500 mV receiver hysteresis, a 5 V nominal supply, and 2/2 full-duplex configuration. Its integrated charge pumps eliminate the need for a separate negative rail, while the 16-pin SOIC package supports conventional surface-mount assembly. The MAX232BASE+T is specified for commercial-temperature operation and is intended for equipment where a standard RS-232 port is required rather than higher-voltage or isolated interfaces. The MAX232 family is based on charge-pump voltage conversion. A small flying capacitor is alternately pumped above and below ground to generate the bipolar voltage swing needed by RS-232 drivers. Receiver inputs include threshold hysteresis, which helps distinguish valid logic states from noise near the transition region. The transmitter converts logic-high and logic-low inputs into the positive and negative voltages defined for RS-232, while the receiver translates those bipolar levels back into logic-compatible signals. Typical applications include legacy PC serial-port adapters, configuration interfaces for industrial equipment, programming ports for test systems, and control links between older host hardware and embedded controllers. The 200 kbps capability is more than adequate for command-and-response protocols, while the two receive channels can also support hardware flow-control or status signals when the connector pin assignment permits it. When laying out a board around the MAX232BASE+T, place the charge-pump capacitors and the V+ bypass capacitor close to their designated pins, and route each transceiver line away from switching nodes. Keep the connector-facing nets short, provide a solid ground reference, and observe the RS-232 common-mode limits specified in the manufacturer datasheet. The MAX232 is not an RS-485 transceiver, so it cannot replace an RS-485 physical layer without a different device and termination strategy. This page combines package and interface details, drop-in replacement guidance, comparison parameters, and practical layout guidance in a single engineering-focused reference for engineers sourcing or maintaining legacy serial-port designs.

RFQ Contact
MAX232BAWE+ - 2/2 RS-232 Transceiver, 200 kbps | Analog Devices
MAX232BAWE+

MAX232BAWE+ - 2/2 RS-232 Transceiver, 200 kbps | Analog Devices

Analog Devices MAX232BAWE+ is a +5 V RS-232 interface transceiver with two drivers and two receivers, a maximum data rate of 200 kbps, and a 16-pin SOIC package. The device operates from a 4.5 V to 5.5 V supply and supports a 0°C to +70°C temperature range. MAX232BAWE+ converts TTL-compatible logic levels to and from RS-232 line levels, making it suitable for industrial control, instrumentation, and legacy serial-port equipment. An RS-232 transceiver is an interface IC that bridges the voltage domains used by TTL/CMOS logic and RS-232 serial communications. The MAX232 family integrates charge-pump circuitry, drivers, and receivers into one package. This integration eliminates a separate RS-232 level-shifting circuit and places the complete signal-conditioning path close to the host logic. Within the product hierarchy, the MAX232 is an RS-232 transceiver, an interface IC, and a semiconductor. The principal operating characteristics include two driver channels, two receiver channels, full-duplex capability, 200 kbps signaling, and 500 mV receiver hysteresis. The 500 mV hysteresis helps reject small noise disturbances around the receiver threshold. Its 4.5 V to 5.5 V supply range provides compatibility with conventional +5 V digital systems, while the integrated charge-pump circuitry develops the positive and negative voltage levels required by RS-232 drivers. This MAX232BAWE+ device uses the 16-pin small-outline integrated-circuit package identified as 16-SOIC in the product information. Its 2/2 driver-receiver organization permits two logical serial channels per device. The 200 kbps maximum data rate is suitable for many legacy control and diagnostic ports, but it does not target high-speed differential serial protocols. Use a newer multi-protocol interface when rates substantially above 200 kbps, lower supply voltage, or smaller package area are required. Typical uses include industrial serial adapters, laboratory instruments, embedded-control boards, barcode-scanner interfaces, and service equipment that retains an RS-232 port. In these systems, the MAX232BAWE+ can connect a microcontroller UART to a DB9 or other RS-232 connector. Designers must still account for cable length, grounding, protection, and the unidirectional nature of each RS-232 driver channel. For layout, place the device close to the connector or protected interface boundary and route each RS-232 line away from sensitive clock and analog signals. Follow the manufacturer datasheet for the charge-pump capacitor connections, supply bypass capacitor, and unused-channel handling. Confirm the full logic-level and channel direction before assigning pins in a new PCB or converting an existing design. This product reference combines the exact MAX232BAWE+ ordering information with practical RS-232 interface guidance, drop-in family comparisons, and engineering-focused design notes. It is intended to help engineers identify the correct package, operating limits, and replacement path without overlooking the distinctions between electrically similar MAX232 variants.

RFQ Contact
MAX232BAWE+T - 5V 2/2 RS-232 Transceiver | Analog Devices
MAX232BAWE+T

MAX232BAWE+T - 5V 2/2 RS-232 Transceiver | Analog Devices

Analog Devices MAX232BAWE+T is a +5 V-powered RS-232 transceiver with two transmitters and two receivers, packaged in a 16-pin SOIC. It supports full RS-232 communication and operates across a temperature range of -40°C to +125°C. The MAX232BAWE+T is identified by Analog Devices as a production part and is supplied in the +T tape-and-reel configuration. An RS-232 transceiver is an interface IC that combines the driver circuitry required to convert logic-level signals into RS-232 voltage levels with receiver circuitry that converts RS-232 signals back into logic levels. This integrated bidirectional interface simplifies point-to-point serial links between equipment such as industrial controllers, test systems, data-acquisition equipment, and computer peripherals. Within the interface hierarchy, the MAX232 belongs to the RS-232 transceiver family of communication interface semiconductors. The principal feature of the MAX232BAWE+T is its two-transmitter, two-receiver arrangement, allowing two serial channels to be implemented in one device. Its +5 V supply arrangement simplifies integration with conventional +5 V digital logic. The wide -40°C to +125°C operating range makes the device suitable for industrial and extended-temperature equipment, while the 16-SOIC package supports compact, surface-mount PCB construction. Analog Devices lists the MAX232 family as a production product and identifies the MAX232BAWE+T as a 2/2 full-RS-232 transceiver in a 16-SOIC package. The BAWE+ order code denotes the temperature and package configuration, while the +T suffix identifies tape-and-reel delivery. Because the device combines multiple RS-232 channels in one package, board designers can reduce the number of separate interface ICs while preserving a standardized RS-232 signal interface. Typical uses include configuration-port links in industrial equipment, serial adapters for test and measurement instruments, control links in data-acquisition systems, and communications between embedded controllers and legacy RS-232 peripherals. The two transmitters can support two outbound signal paths, while the two receivers can monitor two inbound signal paths when the associated system architecture requires separate connections. For implementation, treat the RS-232 pins as a differential voltage interface rather than ordinary logic-level inputs. Confirm the board's TX, RX, signal-ground, and logic-supply connections against the manufacturer pin-description table, and route the interface connector and transceiver so that external cable transients do not bypass the intended protection strategy. The +T tape-and-reel order code must also match the PCB assembly process. This page combines the manufacturer product information with package-level guidance, structured application analysis, and same-footprint replacement options. It is intended to accelerate component identification while preserving the distinction between the production MAX232BAWE+T configuration and other electrical or package variants in the broader MAX232 family.

RFQ Contact
MAX232BEASE+ - Dual RS-232 Transceiver | Analog Devices
MAX232BEASE+

MAX232BEASE+ - Dual RS-232 Transceiver | Analog Devices

The Analog Devices MAX232BEASE+ is a dual, full RS-232 line driver and receiver designed for bidirectional serial communication using TIA/EIA-232-F and V.28 interfaces. It provides two driver channels and two receiver channels in a 16-SOIC package, allowing a single device to support one complete RS-232 port. The MAX232 family uses on-chip charge-pump circuitry to generate the positive and negative voltage swings required by RS-232 from a single supply, avoiding the need for a separate negative power rail. The interface is intended for equipment where logic-level signals must be translated into the voltage range and signaling characteristics required by RS-232 equipment. The B suffix identifies the industrial temperature option, while the E suffix denotes the 16-SOIC package configuration and the A suffix indicates the MAX232A family configuration. The integrated charge pumps and compact surface-mount footprint make the MAX232BEASE+ suitable for industrial control equipment, instrumentation, data acquisition systems, service interfaces, and legacy peripheral connectivity. The MAX232 family is designed to support standard RS-232 data rates while providing receiver and driver functions in one package. In practice, designers should still account for the electrical limits of the RS-232 standard, including cable length, ground reference, protection, and the possibility of connecting to equipment that uses non-standard voltage levels. The MAX232BEASE+ is a practical choice when a compact, single-supply RS-232 interface is required and the system does not need the higher drive strength or extended features found in newer multi-driver interface families.

RFQ Contact
MAX232BEASE+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices
MAX232BEASE+T

MAX232BEASE+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices

The Analog Devices MAX232BEASE+T is a +5 V-powered RS-232 interface transceiver with two transmit channels, two receive channels, and a 16-pin SOIC package. Its specified operating-temperature range is -40°C to +125°C, making it suitable for industrial equipment, embedded systems, and serial-interface subsystems that require a compact, extended-temperature communications solution. An RS-232 transceiver is an interface IC that bridges the voltage levels used by a host or controller and those used by an RS-232 link. The transmitter portion converts logic-level signals into RS-232-compatible levels, while the receiver portion converts incoming RS-232 signals back into logic-compatible levels. This transceiver category belongs to the broader hierarchy of interface IC, communications IC, and semiconductor. The MAX232BEASE+T provides a 2/2 full-duplex RS-232 arrangement, meaning that two channels can transmit while two other channels receive. Its +5 V supply operation supports integration with conventional 5 V digital logic. The 16-SOIC package offers a small, surface-mountable footprint, while the -40°C to +125°C rating provides broad temperature coverage for demanding equipment. RS-232 transceivers are especially useful where point-to-point serial communication must cross a larger voltage range than a CMOS or TTL interface provides. Practical implementations place the transceiver between a UART or communications controller and an external DB9 or equivalent RS-232 connector. Signal integrity depends on correct grounding, cable routing, connector implementation, and compliance with the applicable interface requirements for the finished system. Typical applications include industrial serial consoles, test and measurement equipment, instrumentation, embedded control systems, and legacy peripheral connections. The two transmitters support independent outgoing channels, while the two receivers support dual incoming paths. Such a configuration can simplify designs that need bidirectional status exchange, acknowledgments, or simultaneous data collection without adding two separate interface packages. When designing around the MAX232BEASE+T, use the manufacturer pin-description table when assigning PCB nets and preserve the component orientation defined by the pin-1 marker. Decoupling connections and connector protection must follow the layout and application guidance in the MAX232 manufacturer documentation. Firmware should also treat RS-232 as an unbalanced, point-to-point interface rather than a long-distance multidrop network. This product page consolidates the known MPN, interface, package, and temperature information with application guidance, comparison criteria, and PCB-oriented design notes. It helps engineers identify the correct MAX232 family option while making the package, electrical, sourcing, and replacement requirements easier to evaluate in one place.

RFQ Contact
MAX232BEAWE+ - 2/2 RS-232 Transceiver | Analog Devices
MAX232BEAWE+

MAX232BEAWE+ - 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232BEAWE+ is a 2/2 RS-232 transceiver integrated circuit packaged in a 16-pin SOIC. It combines two RS-232 drivers and two receivers in one device, providing a compact interface between logic-level UART equipment and a ±3 to ±15 V RS-232 communications link. The MAX232 family uses on-chip charge-pump circuitry to generate the bipolar voltage required by the RS-232 driver outputs, reducing the external component count compared with discrete level-shifting designs. An RS-232 transceiver is a signal-conversion device used to bridge the logic-voltage domain of a microcontroller, computer, or programmable controller and the voltage-domain requirements of an RS-232 port. Within the interface IC hierarchy, the MAX232BEAWE+ belongs to the RS-232 transceiver class of serial-interface ICs. Its two-driver, two-receiver arrangement suits point-to-point serial links that require bidirectional communication but do not need the larger channel count of a four-driver, four-receiver RS-232 implementation. The principal benefits are functional integration and compact PCB occupancy. Two transmit channels and two receive channels share one 16-pin SOIC package, while integrated level translation allows the same IC to support both RS-232 output and input signals. The package is suitable for conventional surface-mount PCB assembly, and the + suffix identifies the manufacturer's lead-free commercial ordering configuration. Because the MAX232 family is widely used in RS-232 equipment, designers can generally simplify firmware changes by treating the transceiver as a transparent UART-to-RS-232 interface. RS-232 transmitters require more voltage and current than ordinary CMOS or bipolar logic outputs. The MAX232BEAWE+ therefore functions as an interface boundary rather than as a general-purpose logic driver. Its internal charge-pump circuitry creates the bipolar voltage used by the drivers, while the receivers convert incoming RS-232 signals to a compatible logic level. This division of responsibilities allows the connected UART controller to operate with ordinary push-pull or open-drain interface circuitry while the cable side uses RS-232 levels. Typical uses include industrial serial-control equipment, test and measurement instruments, data-acquisition systems, configuration ports, and legacy service interfaces. A two-channel implementation can support one bidirectional communications path with an additional transmitter or receiver when directional requirements differ. It is also appropriate for embedded systems that retain an RS-232 port for compatibility with printers, scanners, controllers, or laboratory equipment even when the rest of the product uses modern digital interfaces. PCB implementation should follow the Analog Devices MAX232 datasheet for charge-pump capacitor placement, signal routing, and grounding. Keep the charge-pump capacitor connections short, provide the required ceramic capacitance close to the device, and route RS-232 driver outputs away from sensitive receiver inputs. Confirm the connector, cable, grounding, and logic levels before releasing the PCB because the IC solves voltage translation but does not define the complete RS-232 physical interface. This page combines the exact MAX232BEAWE+ package and interface configuration with same-family drop-in options, application guidance, comparison parameters, and practical RS-232 layout considerations. The alternatives are separated from cross-package designs so an engineer can focus on parts that preserve the 16-pin SOIC footprint.

RFQ Contact
MAX232BEAWE+T - 2/2 RS-232 Transceiver | Maxim Integrated
MAX232BEAWE+T

MAX232BEAWE+T - 2/2 RS-232 Transceiver | Maxim Integrated

The Maxim Integrated MAX232BEAWE+T is a 2/2 RS-232 transceiver, meaning it combines two line drivers and two line receivers in one device. The integrated circuit is supplied in a 16-pin SOIC package and is intended for bidirectional serial-interface designs requiring conversion between RS-232 signal levels and CMOS/TTL-compatible logic levels. Its two-driver, two-receiver arrangement allows two data channels to share one physical interface circuit. An RS-232 transceiver is an interface integrated circuit used to connect logic-level equipment to a serial port. The driver section converts low-voltage digital signals into RS-232-compatible levels, while the receiver section converts incoming RS-232 signals back into logic-compatible voltages. This transceiver belongs to the broader semiconductor hierarchy of interface ICs, line drivers and receivers, communication interfaces, and signal-conditioning semiconductors. The MAX232BEAWE+T provides a practical way to add two RS-232 channels without using separate driver and receiver packages. Its 16-SOIC format supports conventional surface-mount PCB assembly. The manufacturer documentation identifies the component as a 2/2 full RS-232 transceiver, allowing it to support both transmission and reception functions in systems such as industrial controllers, data-acquisition equipment, service interfaces, and embedded serial-port equipment. The MAX232 family is commonly used when legacy RS-232 equipment must communicate with a modern digital system. In a typical interface, the MAX232BEAWE+T sits between a host UART and an external RS-232 connector. Logic-level transmit signals enter the drivers, and the receivers return logic-level signals from the connector to the host. The IC therefore handles voltage translation at the physical interface while the UART handles character framing and serial protocol behavior. Typical uses include point-to-point control links, configuration interfaces, instrument-control ports, industrial equipment communication, and embedded service connections. Two integrated channels can reduce the component count compared with separate single-channel transceiver circuits. Board designers must still account for the external charge-pump capacitors, signal grounding, connector protection, cable routing, and the electrical limits that apply to the selected RS-232 standard and connected equipment. For layout, place the device close to the RS-232 connector or interface barrier, keep the driver and receiver routes short, and connect the charge-pump capacitor network exactly as shown in the manufacturer datasheet. The interface should also follow the recommended grounding and protection arrangement for the installed connector. Component values, electrical limits, timing characteristics, and environmental ratings should be confirmed against the datasheet for the exact MAX232BEAWE+T ordering code before release to production. This page combines the exact MAX232BEAWE+T device identification, package information, interface-application guidance, verified drop-in cross-reference options, and practical PCB considerations in a format intended to accelerate engineering selection and implementation.

RFQ Contact
MAX232CASE+ - 5V Dual RS-232 Transceiver | Maxim Integrated
MAX232CASE+

MAX232CASE+ - 5V Dual RS-232 Transceiver | Maxim Integrated

Maxim Integrated MAX232CASE+ is a 5 V RS-232 transceiver with two drivers and two receivers, a maximum data rate of 120 kbps, and a 16-pin SOIC package. It operates from a 4.5 V to 5.5 V supply and is specified for 0°C to 70°C commercial-temperature use. The MAX232CASE+ is an obsolete catalog designation, so procurement should focus on lifecycle confirmation and electrically qualified replacements rather than treating it as a new-design choice. An RS-232 transceiver is an interface IC that converts between logic-level signals used by digital systems and the voltage levels defined for RS-232 communications. The MAX232 belongs to the broader line-driver and line-receiver hierarchy: it combines a dual transmitter, a dual receiver, and an internal charge-pump supply that develops the bipolar voltages required for RS-232 transmission. This integration allows a modern controller or programmable logic device to connect to a legacy serial port using a single 5 V supply. The device provides two transmit channels and two receive channels in a full-duplex arrangement. Its maximum signaling rate is 120 kbps, while receiver hysteresis is 500 mV. The manufacturer describes the family as compliant with EIA/TIA-232E and V.28/V.24 interfaces, and the TI product page identifies ±9 V output levels and ±2 kV ESD protection for MAX232 devices. These characteristics make the interface suitable for control links, equipment communication, and legacy peripheral connections. Internally, the charge pump generates positive and negative voltage rails from the 5 V supply. The external charge-pump capacitors must use adequate voltage ratings and low effective series resistance because ripple on those rails can affect transmitter behavior. The receiver section provides noise tolerance through its 500 mV hysteresis, helping reject small voltage disturbances on a slow or noisy serial connection. Pin-compatible family members differ principally in temperature grade, shutdown capability, or power characteristics. Typical uses include industrial control panels, point-of-sale equipment, test systems, embedded instruments, and service ports that still use RS-232. For new designs, a currently supported family member should be preferred when its electrical ratings satisfy the application. For an existing MAX232CASE+ board, a replacement must match the 16-pin SOIC footprint, 5 V supply range, 2/2 channel configuration, capacitor connection pattern, and RS-232 signal levels. The principal design caution is that the obsolete ordering code should not be assumed to be an active production option. Confirm lifecycle status, temperature requirements, and the exact capacitor network before committing a replacement to a new PCB. Also preserve the required charge-pump capacitor values and place them close to their associated pins to minimize loop area and supply ripple. This page combines lifecycle information, interface specifications, drop-in family alternatives, application guidance, and PCB-focused engineering notes to support replacement planning. The comparison and design sections add practical selection context beyond the basic distributor listing, while the Request a Quote form supports current sourcing of the selected catalog number.

RFQ Contact
MAX232CASE+T - 5V 2Tx/2Rx RS-232 Transceiver | Analog Devices
MAX232CASE+T

MAX232CASE+T - 5V 2Tx/2Rx RS-232 Transceiver | Analog Devices

The Analog Devices MAX232CASE+T is a +5 V-powered, 2-transmitter and 2-receiver RS-232 transceiver packaged in a 16-pin SOIC. It converts between TTL/CMOS logic levels and EIA/TIA-232E serial-interface voltages, operating from -40 C to +125 C according to the MAX232 family documentation. The MAX232 family is designed for equipment where the external RS-232 port cannot directly connect to a microcontroller, FPGA, or other digital controller. An RS-232 transceiver is an interface IC that bridges the voltage-domain difference between digital logic and serial communications. A transmitter converts TTL or CMOS data into bipolar RS-232 levels, while a receiver converts bipolar RS-232 signals back into logic-compatible levels. In the broader semiconductor hierarchy, the MAX232 belongs to interface ICs, then transceiver ICs, then RS-232 line drivers and receivers. Key characteristics include two RS-232 transmitters, two RS-232 receivers, operation from a single +5 V supply, and a 16-SOIC footprint. The MAX232 family is intended for EIA/TIA-232E and V.28/V.24 communications interfaces, particularly where positive and negative RS-232 voltage rails are not otherwise available. This makes it suitable for legacy serial ports, service interfaces, industrial controllers, and embedded debug links. The device uses charge-pump circuitry to generate the negative RS-232 voltage required by the transmitters. Charge pumps, external capacitors, receiver inputs, and transmit outputs therefore form one signal-path subsystem; component placement and trace routing determine whether the interface meets the timing and noise expectations of the connected equipment. The receiver section converts bipolar input signals into a single-ended logic output for the host controller. Typical uses include point-to-point RS-232 links between a microcontroller and a peripheral, service-console connections in industrial equipment, legacy printer or instrument interfaces, and isolated debugging ports. The two-transmitter, two-receiver arrangement supports one hardware flow-control pair alongside the primary data pair when the connected equipment uses RTS and CTS signaling. For a new layout, follow the manufacturer datasheet for capacitor selection, charge-pump placement, and driver-output routing. Place the required charge-pump capacitors close to their associated pins, keep RS-232 driver traces away from sensitive logic and clock nets, and confirm that the equipment-side ground and shield strategy matches the target system. This page adds practical replacement guidance, package-level comparison, application-specific design guidance, and engineering-focused FAQ answers that complement the manufacturer datasheet. It also identifies where a pin-compatible substitution must be checked for temperature grade, supply requirements, and channel-level functional differences before an existing layout is reused.

RFQ Contact
MAX232CEASE+ - 5V 2/2 RS-232 Transceiver | Analog Devices
MAX232CEASE+

MAX232CEASE+ - 5V 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232CEASE+ is a +5 V-powered RS-232 transceiver containing two drivers and two receivers in a 16-pin SOIC package. It converts logic-level UART signals to and from RS-232 line levels, allowing equipment with a serial controller to communicate through a conventional RS-232 port. The device operates from a single 5 V supply while producing the bipolar voltage levels required by RS-232 interfaces. An RS-232 transceiver is an interface IC positioned between digital logic and a serial communications connector. Within the product hierarchy, it belongs to the RS-232 interface transceiver family and the broader category of interface ICs. Its two-driver, two-receiver arrangement supports one bidirectional RS-232 channel or two unidirectional channels, depending on how the pins are connected. Unlike a UART, which generates and interprets serial data but does not provide RS-232 voltage levels, the MAX232CEASE+ performs the physical-layer conversion between CMOS/TTL logic and RS-232. The principal features are a +5 V supply, two transmit drivers, two receive receivers, full RS-232 operation, and a 16-pin SOIC footprint. The integrated charge-pump circuitry supports the positive and negative signal swings required at the driver outputs while the receiver inputs handle the bipolar RS-232 signal range. This makes the device useful where a modern microcontroller or application-specific controller has a UART but lacks a physical RS-232 level-shifting interface. The MAX232 family is specified for EIA/TIA-232E and V.28/V.24 communications interfaces, including designs where ±12 V is unavailable. The single-supply architecture simplifies implementation compared with a discrete bipolar level-shifter circuit. Its 2/2 channel organization also provides flexibility for two independent transmit-only or receive-only links when all four interface pins are not needed in a single bidirectional port. Typical applications include industrial serial adapters, test and measurement equipment, computer peripherals, security systems, and embedded-control subsystems. In each case, the transceiver provides the electrical interface between a low-voltage UART and an RS-232 port while keeping the host-side logic supply at +5 V. PCB implementation should prioritize short driver traces, controlled return paths, and proper connection of the charge-pump capacitors specified by the manufacturer. External protection may be required when the RS-232 cable is exposed to electrostatic discharge or when the connected equipment uses longer cables. This page combines the manufacturer interface description, package information, verified replacement candidates, comparison guidance, and practical PCB design notes. These engineering details help evaluators determine pin compatibility, electrical suitability, and implementation trade-offs before committing the MAX232CEASE+ to an RS-232 design.

RFQ Contact
MAX232CEASE+T - 5V 2/2 RS-232 Transceiver | Analog Devices
MAX232CEASE+T

MAX232CEASE+T - 5V 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232CEASE+T is a 5 V-powered RS-232 interface transceiver with two transmitters and two receivers, packaged in a 16-pin SOIC. It supports the full RS-232 signal amplitude required for reliable point-to-point serial communication and is specified across the -40°C to +125°C industrial temperature range. The device consolidates both directions of an RS-232 port into one compact interface package. An RS-232 transceiver is a semiconductor interface device that converts between complementary TTL/CMOS logic levels and bipolar RS-232 signals. Its transmitter section translates low-voltage digital logic into RS-232-level outputs, while its receiver section converts RS-232 inputs back into digital logic. This bridge function belongs to the interface IC hierarchy, where it supports the larger category of wired data-communication and industrial-control systems. The MAX232CEASE+T provides two transmit channels and two receive channels, allowing two unidirectional serial links to share one package. Its single 5 V supply simplifies system power design, while the integrated level-shifting circuitry removes the need for discrete RS-232 driver and receiver stages. These features make the device suitable for industrial controllers, test equipment, instrumentation, and embedded systems that exchange RS-232 commands or data with peripheral equipment. The MAX232 family is commonly used where legacy RS-232 connectivity must coexist with modern digital logic. A system microcontroller or programmable logic controller can connect its logic-level pins directly to the transceiver, while the board-level RS-232 connector handles the external cable interface. The two receivers and two transmitters provide flexible channel allocation when one direction carries data and another carries control, status, or handshake signaling. Designers should account for RS-232 voltage levels, connector pin assignments, and grounding when laying out a board. The IC should be placed near the protection and connector circuitry, with short traces on logic signals and controlled return paths for cable-generated noise. Decoupling capacitance should follow the manufacturer’s recommended application circuit, and unused interface pins should be handled according to the pin-description and unused-pin guidance in the datasheet. This page combines the device’s principal interface specifications with engineering-oriented selection guidance, application context, package information, and verified drop-in candidates. It is intended to help engineers identify the correct temperature grade, verify board compatibility, and implement a dependable RS-232 interface without confusing package similarity with full electrical equivalence.

RFQ Contact
MAX232CEAWE+ - +5V RS-232 Transceiver | Analog Devices
MAX232CEAWE+

MAX232CEAWE+ - +5V RS-232 Transceiver | Analog Devices

Analog Devices MAX232CEAWE+ is a +5V-powered, 2/2 RS-232 transceiver designed for EIA/TIA-232E, V.28, and V.24 communications interfaces. The device combines two line drivers and two line receivers in a 16-SOIC package, allowing one component to implement a complete dual-channel RS-232 interface. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and RS-232 line drivers and receivers. The MAX232 family belongs to the interface IC hierarchy, where transceiver ICs bridge digital logic systems with the voltage levels, slew rates, and noise-immunity requirements of balanced or unbalanced serial communications. It is particularly useful where the equipment does not provide the traditional positive and negative RS-232 supply rails. The MAX232CEAWE+ uses a single +5V supply, combining two transmit channels and two receive channels in one package. This integration reduces the number of components required for a bidirectional RS-232 port. Its stated interface compatibility includes EIA/TIA-232E, V.28, and V.24 systems, while its 16-SOIC format supports conventional surface-mount PCB assembly. The E designation identifies an industrial-temperature device within the MAX232 family. Operationally, the transmitter portion converts TTL or CMOS logic levels into RS-232-compatible signal levels, while the receiver portion converts incoming RS-232 signals into logic-compatible outputs. The MAX232 family is intended specifically for communications interfaces where positive and negative supply voltages are unavailable. Its internal charge-pump approach allows +5V-powered equipment to implement RS-232 links without external negative-rail generation circuitry. Typical applications include industrial serial adapters, data-acquisition equipment, instrumentation, embedded controller interfaces, point-of-sale systems, and legacy peripheral connections. A two-driver, two-receiver arrangement is useful for consoles, debug ports, programmable instruments, and control systems that exchange data in both directions over separate RS-232 channels. PCB design should prioritize short return paths and controlled return current around the interface. Place the device close to the connector and keep unprotected RS-232 traces away from sensitive analog or high-speed digital nets. The manufacturer's pin-description table should be used when assigning connector-side and logic-side signals, and external protection should be selected for the cable length and installation environment. This product page combines the manufacturer interface description with package, application, and drop-in selection guidance. It also highlights where temperature-grade, ESD-protection, and footprint differences matter when comparing MAX232-family devices for an existing 16-SOIC PCB design.

RFQ Contact
MAX232CEAWE+T - 2/2 RS-232 Transceiver | Analog Devices
MAX232CEAWE+T

MAX232CEAWE+T - 2/2 RS-232 Transceiver | Analog Devices

The Analog Devices MAX232CEAWE+T is a 2/2 full RS-232 transceiver with one driver and one receiver implemented in each direction, a 16-SOIC package, and an operating temperature range of -40°C to +125°C. The device is powered from +5 V and is intended for translating logic-level digital signals to and from RS-232 voltage levels. An RS-232 transceiver is an interface IC that combines drivers and receivers for serial data communication. The driver converts a logic-level input into the bipolar voltage signaling used by RS-232, while the receiver converts a bipolar RS-232 input into a logic-level output. As a full-duplex 2/2 device, the MAX232CEAWE+T supports two transmit channels and two receive channels in one package. Its principal features include two RS-232 drivers, two RS-232 receivers, operation from a +5 V supply, and operation from -40°C to +125°C. The extended temperature range makes the device suitable for industrial equipment, control systems, instrumentation, and communications equipment that must operate across a broad environmental range. The 16-SOIC package supports conventional surface-mount PCB assembly. The MAX232 family combines a dual RS-232 driver and dual receiver with charge-pump voltage generation, allowing the interface to produce RS-232 levels from a single positive supply. Because this is an integrated transceiver, a system can use fewer discrete interface components than a design composed of separate drivers, receivers, and level-shifting circuits. Charge-pump capacitors and supply-decoupling components remain external to the IC. Typical uses include serial service ports, industrial controllers, data-acquisition equipment, test and measurement instruments, and embedded systems that communicate with RS-232 equipment. The two-driver and two-receiver arrangement is useful for point-to-point links where both ends can transmit and receive. A transceiver does not define the serial baud rate or protocol framing; those functions are handled by the host UART and application firmware. For PCB implementation, place the required charge-pump and bypass capacitors close to their associated pins, route the RS-232 driver outputs as impedance-controlled interfaces, and keep switching or high-current paths away from receiver inputs. Confirm the logic levels of the attached UART before connecting the transceiver because RS-232 voltage levels are not directly compatible with TTL or CMOS logic. This product guide combines the exact MAX232CEAWE+T device information with application guidance, engineering considerations, and clearly qualified drop-in comparison options. It also organizes sourcing, datasheet, replacement, and pinout questions so engineers can evaluate the interface quickly without overlooking temperature-range, package, or supply requirements.

RFQ Contact
MAX232CPE - 5V RS-232 Transceiver, 2 Driver/2 Receiver, 16-PDIP
MAX232CPE

MAX232CPE - 5V RS-232 Transceiver, 2 Driver/2 Receiver, 16-PDIP

The Maxim Integrated (Analog Devices) MAX232CPE is a +5V-powered, dual-driver/dual-receiver RS-232 transceiver housed in a 16-pin PDIP (PE) through-hole package. It operates from a single 5V supply using on-board charge-pump capacitors to generate the ±10V RS-232 signal levels, eliminating the need for a ±12V power source. The device conforms to the EIA/TIA-232E and V.28/V.24 communication interface standards and supports data rates up to 120 kbps, satisfying asynchronous serial-port requirements for PCs, embedded controllers, and point-of-sale terminals. An RS-232 transceiver is a line driver/receiver IC that converts between transistor-transistor logic (TTL/CMOS) voltage levels used by microcontrollers and the higher-voltage bipolar signaling levels defined by the EIA/TIA-232 standard. As a member of the line-driver/receiver IC class within Interface ICs, the MAX232 family uses external charge-pump capacitors (typically 1 µF to 10 µF) to double and invert the 5V supply, producing the ±10V swing required by RS-232. This topology removes the legacy dependence on ±12V rails that earlier RS-232 implementations required. Key features include two RS-232 drivers with ±9V output swing (typical), two RS-232 receivers with TTL/CMOS compatible outputs, an integrated dual charge pump requiring only four external 1 µF capacitors, low supply current of 8 mA typical, and an operating temperature range of 0°C to +70°C (commercial grade). The MAX232CPE differs from the higher-speed MAX232EPE (which extends to 250 kbps) and the wide-temperature MAX232AEPE (which extends to -40°C and adds 15 kV ESD protection on the driver outputs). The MAX232 family uses a proprietary dual charge-pump architecture that converts +5V into +10V and -10V using only four external capacitors. The drivers meet the EIA/TIA-232E and V.28 specifications with minimum ±5V output swing into 3 kΩ loads, while the receivers accept ±25V inputs and present 5 kΩ input resistance to the line. The MAX232CPE ships in the 16-pin PDIP (PE) through-hole package with pinout identical to the MAX232EPE, MAX232AEPE, SP232ACP-L, and other industry-standard drop-in equivalents. Typical applications include microcontroller UART-to-RS-232 level translation, industrial point-of-sale (POS) terminals, networking equipment console ports, embedded debug and programming interfaces, and legacy serial peripheral interconnects (modems, instrumentation, barcode scanners). The wide input tolerance of the receivers (±25V) tolerates mis-wiring and noisy RS-232 environments. When designing with this device, place the four charge-pump capacitors as close as possible to the IC pins and use 1 µF (or larger) ceramic or tantalum types to maintain ±10V output levels. Verify that the data rate does not exceed 120 kbps, as the MAX232CPE is not designed for higher-speed operation; for that, select the MAX232EPE (250 kbps) or MAX232AEPE (200 kbps) variants. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical PCB layout guidance not collated in the original manufacturer datasheet.

RFQ Contact
MAX232CPE-C70055 - RS-232 Transceiver | Analog Devices
MAX232CPE-C70055

MAX232CPE-C70055 - RS-232 Transceiver | Analog Devices

Analog Devices MAX232CPE-C70055 is a dual RS-232 line-driver and receiver transceiver integrated circuit in a 16-pin PDIP package. The device provides two transmit channels and two receive channels for converting TTL/CMOS logic levels to and from EIA/TIA-232E-compatible signal levels. Its primary role is to bridge a digital controller, computer, or microcontroller UART with a physical RS-232 port, allowing equipment to communicate over a wired serial interface without a separate level-conversion circuit. The MAX232 family belongs to the interface-IC hierarchy: RS-232 transceiver -> line driver and receiver -> logic interface IC -> semiconductor. A MAX232-type device uses an on-chip charge-pump voltage converter to generate the positive and negative voltages required by RS-232 drivers. This allows a circuit powered from a single positive supply to communicate with equipment using RS-232 signal levels. The device is intended for applications where traditional RS-232 communication is required but higher-speed differential or differential alternatives are not appropriate. The C70055 ordering suffix identifies a specific manufacturer-specified configuration associated with the MAX232CPE family. The verified product information identifies the device as a dual-driver, dual-receiver RS-232 interface IC in a 16-pin PDIP package. The standard MAX232CPE family is described as an EIA/TIA-232E and V.28/V.24-compatible interface for systems where positive and negative supply rails are unavailable. Key engineering considerations include the external charge-pump capacitor values, supply bypass, unused-line handling, and the difference between logic-level and RS-232-level signals. Typical uses include industrial control equipment, data acquisition systems, service interfaces, test fixtures, serial adapters, and embedded equipment that needs a conventional RS-232 port. The MAX232 is most appropriate when the system uses a UART with TTL logic and requires a legacy RS-232 connector. It is not the right choice when the design needs galvanic isolation, very high data rates, long unrepeated cable distances, or modern USB-to-serial conversion. A practical design should follow the manufacturer's application circuit, including the specified charge-pump capacitors, local supply decoupling, and controlled handling of unused receiver and driver outputs. PCB placement should keep the charge-pump loop compact and connect the connector-side return path carefully to reduce noise pickup. For a new design, verify the exact C70055 ordering code, electrical limits, and package drawings against the current Analog Devices or Maxim Integrated documentation before releasing the PCB.

RFQ Contact
MAX232CPE.C70062 5V RS-232 Transceiver | Analog Devices
MAX232CPE.C70062

MAX232CPE.C70062 5V RS-232 Transceiver | Analog Devices

Analog Devices MAX232CPE.C70062 is a 5 V RS-232 line-driver and receiver transceiver with two driver and two receiver channels, packaged in a 16-pin PDIP. It is designed for EIA/TIA-232E and V.28/V.24 communications interfaces where positive and negative supply voltages around ±12 V are not available. The MAX232 family uses onboard charge-pump circuitry to generate the negative voltage required by the RS-232 receiver threshold. An RS-232 transceiver is an interface IC that translates logic-level signals between a computer or controller and a cable-based serial link. The MAX220–MAX249 family belongs to the RS-232 interface hierarchy, which includes line drivers, line receivers, transceivers, and interface controller devices. This distinction matters because an RS-232 transmitter converts single-ended digital logic into a bipolar differential signal, while its receiver restores the logic-level signal received from the cable. The MAX232CPE.C70062 provides a 16-pin PDIP package, a nominal 5 V supply, and two transmit plus two receive channels. Its principal system benefit is the elimination of separate negative power rails at the transceiver. The integrated charge-pump circuit generates the negative bias needed to interpret RS-232 receive levels, allowing the device to operate from a single positive supply while maintaining compatibility with standard RS-232 equipment. Typical uses include industrial control interfaces, serial service ports, instrumentation, embedded equipment, and legacy peripheral connections. Designers should use the manufacturer pin-description table when assigning connector signals and should account for the non-logic RS-232 voltage levels at the line pins. The communications path also requires suitable board layout, cable selection, grounding, and protection practices to achieve reliable operation in industrial environments. The MAX232CPE.C70062 is the MAX232CPE part number with the C70062 customer ordering suffix. Verify the suffix, package marking, shipping configuration, and documentation revision before releasing a production order. Because this suffix identifies a specific ordering configuration, engineers should treat it as a distinct line item rather than silently substituting the base MAX232CPE designation. This page consolidates interface details, package information, application guidance, and verified drop-in alternatives for MAX232CPE.C70062. It also provides selection criteria for comparing same-footprint transceivers without confusing a functional alternative with a true pin-to-pin replacement. Review the electrical limits and pin descriptions in the manufacturer datasheet before finalizing a circuit. For a new design, confirm availability, lifecycle expectations, and the exact ordering code through the Request a Quote form on this page. For an existing PCB, validate the pinout, supply voltage, channel count, and RS-232 electrical requirements before approving any alternative.

RFQ Contact
MAX232CSE+ - Dual RS-232 Transceiver, 16-SOIC | Analog Devices
MAX232CSE+

MAX232CSE+ - Dual RS-232 Transceiver, 16-SOIC | Analog Devices

Analog Devices MAX232CSE+ is a dual RS-232 line-driver and receiver IC with one transmitter and one receiver per channel, a 4.5 V to 5.5 V supply range, and a 16-pin SOIC package. It is designed to add bipolar RS-232 signal conditioning to systems whose logic-side supply is 5 V and whose external interface does not provide the positive and negative voltages required by the EIA/TIA-232E standard. An RS-232 transceiver is an interface IC that converts low-voltage logic-level signals into differential, bipolar line signals and converts received line signals back into logic-compatible levels. The MAX232 belongs to the RS-232 interface transceiver category, combining line drivers, line receivers, and an on-chip charge-pump voltage converter in one package. This integration allows a 5 V circuit to communicate with legacy serial equipment without a separate negative-power supply. The device provides two driver channels and two receiver channels, supporting full-duplex serial communication when both directions are used. Its 4.5 V to 5.5 V operating supply supports conventional 5 V digital systems, while the internal charge pump generates the positive and negative voltages required to drive RS-232 loads. The wide-logic compatibility and integrated level translation make the MAX232 suitable for UART-based links, control equipment, and legacy peripheral connections. The MAX220 through MAX249 family is specified for EIA/TIA-232E and V.28/V.24 communications interfaces. This is particularly important where the equipment must interoperate with older RS-232 ports rather than only with modern low-voltage serial standards. The C suffix identifies the capacitor and operating-temperature configuration, while the E suffix denotes the narrow SOIC package and the trailing plus identifies the lead-free ordering code. Typical uses include industrial controller-to-console links, configuration ports on test equipment, service interfaces for printers and scanners, and communication links between 5 V microcontrollers and RS-232 equipment. The two receiver channels can also monitor two incoming lines when only one transmit channel is needed. System designers should account for the charge-pump capacitors, grounding, logic levels, and the slower edge rates associated with the selected RS-232 implementation. Place the charge-pump capacitors and interface-decoupling capacitor close to their associated pins and route driver outputs and receiver inputs away from sensitive clock, reset, and analog signals. Keep the ground and supply return paths short because the receiver must distinguish small logic-side transitions from bipolar RS-232 levels. Confirm signal polarity, baud rate, and flow-control requirements at the software interface before replacing an existing MAX232 implementation. This product page combines the confirmed electrical identity, package information, interface standards, and drop-in alternatives with application-oriented design guidance. It helps engineers identify the correct RS-232 transceiver, verify footprint compatibility, and plan charge-pump capacitance and PCB layout before committing a MAX232CSE+ to a new PCB.

RFQ Contact