Products (22,000+)

MCS12GC64CFUE - 16-Bit 25MHz 64KB Flash MCU | NXP
MCS12GC64CFUE

MCS12GC64CFUE - 16-Bit 25MHz 64KB Flash MCU | NXP

The NXP Semiconductors MCS12GC64CFUE is a 16-bit HCS12 microcontroller operating at 25 MHz, with 64 KB of flash program memory and 60 general-purpose I/O pins in an 80-QFP package measuring 14 x 14 mm. It is identified as a 64K x 8 flash MCU and is positioned for embedded control applications requiring a combination of microcontroller processing, serial connectivity, timing, and control peripherals. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripheral interfaces onto one package. The HCS12 architecture belongs to the embedded-microcontroller hierarchy and is commonly used for industrial controllers, automotive subsystems, communication equipment, and compact control systems. The MCS12GC64CFUE specifically provides a 16-bit core, 25 MHz operation, 64 KB flash memory, and 60 I/O pins according to the verified distributor and datasheet search results. The key device characteristics visible in the verified data are the 16-bit processor architecture, 25 MHz maximum stated speed, 64 KB flash program memory organized as 64K x 8, 80-QFP packaging, and 60 I/O pins. The package is listed as 14 x 14 mm. The verified technical listing also identifies EBI/EMI, SCI, and SPI connectivity, along with power-on reset, PWM, and watchdog-timer peripherals. These features make the device suitable for designs that need multiple external interfaces and embedded control logic. The device belongs to the HCS12 family and is described in distributor listings as an HCS12 microcontroller. Its 64 KB flash capacity provides a defined firmware-storage target for embedded control code, while the 60 I/O pins provide interface capacity for sensors, actuators, logic signals, and communication peripherals. The 25 MHz operating speed supports time-sensitive control tasks, although final firmware performance depends on the application, memory configuration, and external circuitry. Typical applications include industrial automation equipment, automotive electronic control units, embedded communication modules, motor and actuator controllers, and compact embedded systems. The EBI/EMI interface can support external bus-oriented designs, SCI is suited to serial communications, and SPI can connect to sensors, displays, memory, and other digital peripherals. These functions should be validated against the complete manufacturer datasheet before schematic or firmware release. Designers should pay particular attention to the 80-QFP footprint, pin multiplexing, supply requirements, clock configuration, memory programming, and peripheral pin assignments. Because the component is listed as obsolete in the verified search result, production sourcing should include lifecycle confirmation, authorized-channel stock checks, and a controlled last-time-buy or redesign plan. The page provides verified data, practical application context, and sourcing guidance; unavailable parameters remain explicitly marked rather than estimated. This page combines distributor specifications, lifecycle information, package details, and application-oriented engineering guidance for engineers evaluating MCS12GC64CFUE. It emphasizes what the verified data establishes, identifies the obsolete status shown in the search result, and separates confirmed specifications from parameters that require the manufacturer datasheet.

RFQ Contact
MCXA345VLH - 180MHz Cortex-M33 MCU, 512KB Flash | NXP
MCXA345VLH

MCXA345VLH - 180MHz Cortex-M33 MCU, 512KB Flash | NXP

The NXP MCXA345VLH is a mixed-signal Arm Cortex-M33 microcontroller IC running at 180 MHz with 512 KB of on-chip Flash, intended for advanced motor control and real-time embedded applications. It integrates a single-precision FPU, a mathematical acceleration unit (MAU) for motor-control DSP, SmartDMA, dual FlexPWM modules with submodule flexibility, up to four embedded op-amps and up to four 16-bit ADCs, and is housed in a 64-pin LQFP (10x10 mm) package. A microcontroller (MCU) is a compact, self-contained computing device that integrates a CPU core, program and data memory, peripherals, and I/O on a single silicon die. The Cortex-M33 class adds Arm TrustZone-M security, a single-precision FPU, DSP extensions and deterministic interrupt handling for industrial-grade mixed-signal control. Within NXP's portfolio taxonomy, the MCX A34 family sits below the higher-end MCX N and i.MX RT crossover lines and above the mainstream Kinetis KE/KM series - bridging real-time motor control, power conversion and analog-front-end integration into a single MCU. Key differentiating features include: 180 MHz Cortex-M33 core with MPU and TrustZone-M, 512 KB Flash and up to 96 KB SRAM, dual FlexPWM with 8 PWM outputs suited to 3-phase inverter topologies, up to four 16-bit ADCs at 2 MSPS for current/voltage feedback, four on-chip op-amps that eliminate external signal conditioning, and a low-power run/standby architecture with multiple wake-up sources. The MAU accelerates trigonometric and Clarke/Park transforms for field-oriented motor control. Typical applications include BLDC/PMSM motor drives for appliances, HVAC fans and pumps, industrial servo and robotics, digital power conversion (PFC, buck/boost), e-bike and light electric-vehicle controllers, and solar micro-inverter gate-driver boards. The 64-pin LQFP footprint is industrial-friendly, supports hand-solderable prototypes and matches the package placement used by the wider MCX A34 family. When designing with the MCXA345VLH, allocate adequate decoupling (100 nF + 1 uF per VDD pin pair) and route analog/digital grounds as a star tied under the exposed pad. The internal op-amps save PCB area but need output current considered when driving ADC inputs with long tracks. For firmware development, use the NXP MCX A345 device family pack (DFP) in MCUXpresso IDE or Keil MDK.

RFQ Contact
MCXN556TCDFT - MCX N556 MCU 184MHz 250KB VFBGA-184 | NXP
MCXN556TCDFT

MCXN556TCDFT - MCX N556 MCU 184MHz 250KB VFBGA-184 | NXP

The NXP Semiconductors MCXN556TCDFT is a dual-core Arm Cortex-M33 microcontroller from the MCX N series, integrating 250 KB SRAM in a 184-ball VFBGA (very thin fine-pitch BGA) package measuring 9 mm x 9 mm x 0.86 mm with a 0.5 mm ball pitch. Key features include an Arm Cortex-M33 core (with optional Cortex-M0+ companion core) operating up to 150 MHz, a high-speed Cortex-M33 core up to 250 MHz, 250 KB on-chip SRAM, a low-power voltage regulator, and an integrated 12-bit ADC, programmable peripherals, and a comprehensive set of connectivity options including USB, CAN-FD, I3C, and FlexIO. The MCX N series is a scalable, low-power microcontroller family designed for secure, edge-connected IoT and industrial applications. It belongs to the broader MCU taxonomy as a Cortex-M33 based device -> ARM Cortex-M microcontroller -> general-purpose MCU -> microcontroller IC -> embedded system component. The high-performance main core runs at up to 250 MHz, while the Cortex-M0+ low-power core operates up to 150 MHz, providing heterogeneous compute for both performance-critical and energy-efficient tasks. The device integrates multiple low-power modes, on-chip SRAM, security features such as secure boot and cryptographic accelerators, a fast ADC, and a rich set of timers and communication peripherals. The combination of performance, integration, and low power consumption makes the MCXN556TCDFT well-suited for industrial IoT endpoints, secure connected sensors, and battery-powered edge devices. Typical applications include industrial IoT sensor nodes, secure connected home and building automation, battery-powered wearables, motor control and field-oriented control, secure payment terminals, and predictive maintenance sensor hubs. When designing with this device, ensure PCB layout accommodates the 0.5 mm pitch VFBGA ball array and provides adequate thermal vias beneath the central thermal balls; careful signal-integrity routing is required for the high-speed ADC and USB interfaces.

RFQ Contact
MEC1428-TF-C1 - 192KB MCU with SAF | Microchip Technology
MEC1428-TF-C1

MEC1428-TF-C1 - 192KB MCU with SAF | Microchip Technology

The Microchip Technology MEC1428-TF-C1 is a keyboard and embedded controller microcontroller with a MIPS32 M14K processor, 192KB SRAM, external program memory, and Slave Attached Flash support, packaged in a 128-WFBGA. It operates from 1.71V to 3.465V and provides 108 I/O in a commercial 0°C to 70°C temperature grade. A microcontroller integrates a processor core, memory, programmable I/O, and communication peripherals into one device. The MEC1428 belongs to the MEC14XX family and targets embedded control, keyboard, and USB Type-C power-delivery designs. Its Slave Attached Flash interface provides a dedicated path for external flash integration, while the integrated I2C, LPC, SMBus, SPI, and UART interfaces support system-management and peripheral connectivity. Key features include the MIPS32 M14K core, 192KB of SRAM, external program-memory architecture, 108 I/O, and the 128-WFBGA package. The broad peripheral mix allows keyboard controllers, embedded controllers, storage devices, and platform-management components to share one controller platform. The listed 1.71V to 3.465V operating range supports embedded systems that require low-voltage digital rails. The MEC1428 is designed for applications where external flash is required and where a compact controller needs multiple low-speed and high-speed serial interfaces. Its eSPI and LPC connectivity are particularly useful in embedded platform designs, while SPI, I2C, SMBus, and UART provide flexible peripheral expansion. The 128-WFBGA package offers dense integration but requires careful PCB layout and thermal verification. Typical uses include USB Type-C power-delivery controllers, keyboard and embedded control systems, storage-management controllers, and platform support logic. The external-program-memory architecture should be matched with the intended flash device, interface timing, and firmware boot strategy. Designers should review the complete Microchip datasheet and reference design before layout. Pay particular attention to ball assignments, power rails, decoupling, external-flash routing, and signal integrity because the BGA package leaves little tolerance for layout errors. This page consolidates verified distributor information, manufacturer-device positioning, interface details, and practical selection guidance to support fast sourcing and engineering review.

RFQ Contact
MIMX8ML3CVNKZAB - i.MX 8M Plus Dual A53 1.6GHz SoC | NXP
MIMX8ML3CVNKZAB

MIMX8ML3CVNKZAB - i.MX 8M Plus Dual A53 1.6GHz SoC | NXP

The NXP Semiconductors MIMX8ML3CVNKZAB is a dual-core ARM Cortex-A53 microprocessor from the i.MX 8M Plus applications processor family, operating at up to 1.6 GHz and housed in a 548-pin LFBGA (15x15 mm) package. It is a member of the i.MX 8M Plus dual-core industrial variants, integrating 2x Cortex-A53 cores at 1.6 GHz, a Cortex-M7 real-time coprocessor, a 2.3 TOPS Neural Processing Unit (NPU), dual Image Signal Processors (ISPs), and a HiFi 4 DSP. This heterogeneous compute fabric targets machine learning inference, advanced multimedia, machine vision, and industrial automation workloads. What is an applications processor? An applications processor is a highly integrated System-on-Chip (SoC) that combines one or more CPU cores with GPUs, DSPs, ISPs, NPUs, multimedia accelerators, and a rich peripheral set on a single die. Applications processors sit at the top of the embedded hierarchy - above microcontrollers (MCUs) - and are commonly used to run Linux, Android, or RTOS-based platforms where graphics, vision, and machine-learning workloads dominate. The i.MX 8M Plus family is NXP's flagship edge-AI applications processor family, designed to deliver deterministic performance for Industry 4.0, smart home, smart building, smart city, and edge machine-learning applications. Key features include 32 KB L1 instruction cache per Cortex-A53 core, 32 KB L1 data cache, 512 KB unified L2 cache, 2.3 TOPS NPU, dual MIPI-CSI2 camera interfaces, dual Image Signal Processors, two USB 3.0/2.0 controllers, dual Gigabit Ethernet with AVB/TSN, PCIe Gen 3, and an LPDDR4/LPDDR4X memory controller. The integrated GC7000Lite GPU supports OpenGL ES 3.1, OpenCL, and Vulkan, while the HiFi 4 DSP enables efficient audio pre/post-processing. Architecturally, the MIMX8ML3CVNKZAB uses a 14 nm FinFET process and supports a wide voltage range with multiple power domains managed by an integrated PMIC interface. Hardware cryptography acceleration includes AES, RSA, SHA, and a True Random Number Generator (TRNG), supporting secure boot and hardware root-of-trust for IoT edge deployments. Typical applications include industrial machine vision systems, AI-enabled edge gateways, smart retail signage, medical imaging, building automation controllers, and automotive infotainment/telematics prototypes. The dual-core configuration offers a balance between AI performance and energy efficiency for fanless industrial designs. When designing with this SoC, ensure proper thermal management - the 14 nm process and 1.6 GHz core frequency require a multi-layer PCB with adequate copper pours and possibly a heatsink for sustained workloads. LPDDR4 routing must follow strict length-matching and impedance-control rules per the NXP Hardware Design Guide. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single source for engineers evaluating the i.MX 8M Plus for industrial edge AI designs.

RFQ Contact
MIMX8MM6CVTKZAA - i.MX8MM Quad A53 1.6GHz SoC | NXP
MIMX8MM6CVTKZAA

MIMX8MM6CVTKZAA - i.MX8MM Quad A53 1.6GHz SoC | NXP

The NXP Semiconductors MIMX8MM6CVTKZAA is a high-performance embedded applications processor from the i.MX 8M Mini family, built on advanced 14LPC FinFET process technology. It integrates a quad-core ARM Cortex-A53 application processor running at up to 1.6GHz along with a Cortex-M4F core for real-time processing, housed in a 486-ball LFBGA package (14x14 mm) for industrial and consumer applications balancing performance, power efficiency, and multimedia capabilities. An applications processor is a system-on-chip (SoC) designed to run operating systems such as embedded Linux and complex application software on ARM architecture. It integrates CPU cores, memory controllers, graphics, and I/O interfaces, serving as the main processing unit in smart home hubs, IoT gateways, and industrial control systems. The i.MX 8M Mini sits between the lower-power i.MX 6 series and the higher-performance i.MX 8M Quad/Plus in the embedded processor hierarchy. Key features include the 64-bit quad-core Cortex-A53 cluster at 1.6GHz, a Cortex-M4F core for low-latency deterministic control, a 3D GPU (GC NanoUltra), a 2D GPU, and a 4K VPU for video encode/decode. Memory support covers LPDDR4/DDR4, and connectivity includes Gigabit Ethernet, USB 3.0, PCIe, and multiple display interfaces. Technically, the 14LPC FinFET process delivers improved power efficiency versus older planar nodes. The heterogeneous multicore architecture partitions tasks between the A53 cluster and the M4F core, enabling efficient power management. TrustZone support provides secure boot and secure execution for secure IoT deployments. Typical applications include smart home hubs, IoT gateways, industrial HMI, medical devices, and multimedia streaming devices, where combined CPU, GPU, VPU, and connectivity resources suit edge computing and AI inference. Design tip: pay careful attention to power sequencing and thermal management. The 486-ball LFBGA requires a multi-layer PCB with thermal vias and a solid ground plane, plus proper decoupling capacitors near power pins for stable operation.

USD $16.40 Contact
MIMX8QM5CVUFFAB - i.MX 8QuadMax 8-Core SoC | NXP | 1313-BGA
MIMX8QM5CVUFFAB

MIMX8QM5CVUFFAB - i.MX 8QuadMax 8-Core SoC | NXP | 1313-BGA

The NXP Semiconductors MIMX8QM5CVUFFAB is the i.MX 8QuadMax application processor, a heterogeneous eight-core System on Chip (SoC) integrating two Arm Cortex-A72, four Arm Cortex-A53, and two Arm Cortex-M4F cores in a 1313-ball FBGA package measuring 29x29 mm with automotive temperature grade. An SoC (System on Chip) consolidates CPU, GPU, memory interfaces, and peripheral controllers into a single integrated circuit, forming the complete computing heart of an embedded system. The i.MX 8QuadMax sits at the top of the NXP i.MX 8 family (alongside 8QuadPlus and 8DualMax), targeting high-performance automotive, industrial, and consumer platforms that need advanced graphics, vision processing, and deterministic real-time control in one device. Key features include full-chip hardware virtualization with domain protection for secure multi-OS operation, independent graphics across four HD displays or one 4K screen, an integrated vision pipeline for ADAS-class perception, and an audio subsystem optimized for voice and speech recognition. The dual Cortex-A72 cores handle heavy application workloads, the quad Cortex-A53 cores provide power-efficient scaling, and the dual Cortex-M4F cores run real-time, safety-relevant tasks - a heterogeneous balance of throughput and efficiency. The architecture supports Android, Linux, FreeRTOS, QNX, Green Hills, and Dornerworks XEN operating systems, and the family offers pin- and power-compatible packages for hardware design reuse. Typical applications include automotive digital cockpits, infotainment, ADAS vision systems, industrial HMI panels, and medical imaging equipment, where rich UI and real-time control must coexist. Design consideration: the 1313-ball BGA demands a multi-layer PCB with thermal vias and strict power sequencing; the MSL 3 rating (168-hour floor life) requires controlled moisture handling before reflow.

RFQ Contact
MIMXRT1061CVJ5B - 528MHz Cortex-M7 MCU | NXP | Industrial
MIMXRT1061CVJ5B

MIMXRT1061CVJ5B - 528MHz Cortex-M7 MCU | NXP | Industrial

The NXP Semiconductors MIMXRT1061CVJ5B is a 32-bit Arm Cortex-M7 crossover microprocessor operating up to 528 MHz, packaged in a 196-ball LFBGA measuring 12 x 12 mm. The device combines real-time MCU responsiveness with high-performance crossover-processor integration, supporting demanding industrial, networking, and embedded-control applications. A crossover processor is a semiconductor category that combines microcontroller real-time operation with higher-level processing capabilities. Unlike a conventional microcontroller optimized around deterministic peripheral control, the i.MX RT1060 family provides extensive connectivity, memory interfaces, security features, and graphical-media acceleration for connected embedded systems. The Arm Cortex-M7 architecture belongs to the microcontroller processor hierarchy and executes from tightly coupled memory for predictable control performance. According to the verified product listings, the MIMXRT1061CVJ5B is identified as an RT1060 device with a 528 MHz Cortex-M7 core and a 196-LFBGA package. Distributor and aggregator listings also identify this orderable configuration as a fixed USB variant. The package uses bottom-side ball terminals and surface-mount assembly, making careful PCB escape routing and thermal management essential. The i.MX RT1060 crossover-processor family is designed to bridge MCU-class control and higher-end embedded workloads. Its integrated feature set supports connected industrial equipment, human-machine interfaces, communications infrastructure, and real-time control systems. A separate NXP cross-reference result for the DVL6B variant advertises a 600 MHz Cortex-M7 core, but that variant is not treated as a drop-in substitute because its verified frequency differs by approximately 13.6 percent and other ordering details are not established here. Typical design use includes industrial gateways, connected controllers, operator panels, building automation equipment, and networked sensors. The device can manage communication tasks alongside deterministic peripheral control without adopting a higher-power application-processor architecture. Developers should confirm memory configuration, pin multiplexing, peripheral availability, clock limits, security features, and package-level routing against the official NXP datasheet before release. For PCB implementation, follow the manufacturer land pattern, ball-pitch, via, and decoupling guidance rather than generic BGA rules. Validate high-speed memory and communication interfaces with controlled-impedance routing, continuous reference planes, and signal-integrity simulations. Production designs should also review errata, boot configuration, power sequencing, firmware support, and long-term availability. This page consolidates verified NXP and distributor information, exact package identification, application guidance, design cautions, and candid replacement analysis. It distinguishes confirmed data from parameters that still require datasheet verification so procurement and engineering teams can evaluate the part efficiently without mistaking assumptions for released specifications.

RFQ Contact
MIMXRT1061CVL5B - 600MHz Cortex-M7 Crossover MCU | NXP
MIMXRT1061CVL5B

MIMXRT1061CVL5B - 600MHz Cortex-M7 Crossover MCU | NXP

The NXP MIMXRT1061CVL5B is a 32-bit crossover microcontroller built around an ARM Cortex-M7 core running up to 528 MHz (with the silicon capable of 600 MHz in the RT1061 family) and housed in a 196-ball MAPBGA package measuring 10x10 mm. According to the NXP product page, this RT1060-family industrial-grade MCU integrates 1 MB of on-chip SRAM and supports external memory through SEMC, FlexSPI, and parallel interfaces, delivering real-time signal processing for industrial control, motor drives, and human-machine interface applications. A crossover microcontroller combines the high-performance characteristics of an application processor (e.g., GHz clock, large memory) with the deterministic real-time response and low power of a microcontroller. Within the broader taxonomy, the MIMXRT1061 sits in the crossover MCU segment bridging high-end microcontrollers and entry-level application processors, complementing NXP's i.MX 8M family. Its 196-ball MAPBGA provides ample I/O for advanced peripherals including dual Ethernet, USB, CAN-FD, and a 12-bit ADC. Key features include an integrated LCDIF controller supporting up to WXGA displays, dual FlexSPI interfaces for high-speed external flash, a 12-bit ADC with up to 20 channels, and an integrated power management IC (PMIC) companion interface. The Cortex-M7 core delivers 2.14 CoreMark/MHz performance with double-precision FPU, DSP extensions, and L1 cache (16 KB I-cache and 16 KB D-cache). Hardware encryption is provided through the Bus Encryption Engine (BEE) for secure external flash execution. The RT1061 architecture implements a 4-channel eDMA, FlexTimer (FTM) modules for PWM generation, and a flexible peripheral crossbar for pin mapping. Operating voltage spans 3V to 3.6V with internal DCDC and LDO regulators generating core rails. The device supports industrial temperature ranges of -40C to +105C for harsh-environment deployments. Typical applications include industrial HMI panels with LCD displays, motor control and field-oriented control (FOC) drives, building automation controllers, point-of-sale terminals, and edge IoT gateways. The 528 MHz operation with DSP extensions makes it suitable for predictive maintenance algorithms running on-device. When designing with this part, ensure proper PCB layout for the 196-ball MAPBGA with via-in-pad or dog-bone fanout, and follow NXP's hardware design guide for DDR3L memory routing. The internal PMIC companion requires careful sequencing of DCDC outputs for clean power-up. This page synthesizes distributor pricing, drop-in package alternatives within the RT106x family, and design notes extracted from the NXP datasheet and community support threads.

RFQ Contact
MIMXRT1062DVL6B - i.MX RT1062 600MHz Cortex-M7 MCU | NXP
MIMXRT1062DVL6B

MIMXRT1062DVL6B - i.MX RT1062 600MHz Cortex-M7 MCU | NXP

The NXP MIMXRT1062DVL6B is a high-performance crossover microprocessor featuring an Arm Cortex-M7 core running at 600 MHz with 1 MB of on-chip SRAM, housed in a 196-ball LFBGA (10x10 mm) package. It belongs to the i.MX RT1060 family, blending microcontroller responsiveness with application-processor throughput for consumer products. The device integrates advanced peripherals including an LCD controller, 2D graphics accelerator (PxP), CSI camera interface, and FlexSPI for external memory expansion. What is a crossover processor? A crossover processor combines the real-time deterministic behavior of a microcontroller (MCU) with the high performance and rich multimedia features of an application processor (MPU). It bridges the architectural gap between Cortex-M MCUs and Cortex-A MPUs, sitting in the product-type hierarchy as: microcontroller -> crossover processor -> embedded processor -> semiconductor IC. This category targets applications requiring real-time DSP, graphics, and high-speed connectivity without the overhead of a full Linux-capable MPU. Key features include 600 MHz Cortex-M7 with single-precision and double-precision FPU, 1 MB on-chip SRAM, dual FlexSPI for QSPI/NOR/NAND expansion, integrated LCDIF display controller up to WXGA resolution, USB 2.0 OTG with PHY, 10/100 Mbit Ethernet MAC, 8-bit CMOS sensor interface (CSI), and 2D PxP engine. The part operates from 0.95 V to 1.05 V core and 3.0 V to 3.6 V I/O supplies, with industrial-grade temperature support. The architecture leverages the Cortex-M7 superscalar pipeline with tightly-coupled memory for deterministic interrupt response, paired with NXP's SmartDMA and eFuse-based secure boot. The 196-ball LFBGA provides ample I/O routing for high-speed parallel buses and multiple serial interfaces (SPI, I2C, UART, CAN, FlexCAN, SAI). Hardware cryptography via CAAM and TrustZone-M for isolation are integrated for secure IoT edge designs. Typical applications include HMI panels for industrial and home appliances, USB audio devices with display, motor control inverters, smart-home gateways, low-cost HMI for IoT edge nodes, and point-of-sale terminals. The wide peripheral set lets designers replace legacy MCU + external controller stacks with a single chip. When designing with this part, ensure the PCB provides sufficient thermal dissipation; the LFBGA package requires 6-layer stack-up with microvia-in-pad for reliable BGA assembly. SDRAM traces must be length-matched within 50 mils for DDR operation. Use the NXP MCUXpresso SDK and Config Tools for peripheral initialization and pin muxing. This page synthesizes distributor pricing, pin-compatible i.MX RT1060 family drop-in alternatives, and practical design considerations not aggregated on a single manufacturer or distributor page.

RFQ Contact
MIMXRT1064CVJ5B - 528MHz Cortex-M7 Crossover MCU | NXP
MIMXRT1064CVJ5B

MIMXRT1064CVJ5B - 528MHz Cortex-M7 Crossover MCU | NXP

The NXP MIMXRT1064CVJ5B is a high-performance crossover microcontroller featuring an Arm Cortex-M7 core running at 528 MHz, 4 MB on-chip flash, and 1 MB SRAM, housed in a 196-ball LFBGA (12x12 mm) package. As a member of the i.MX RT1060 family, the part bridges the gap between Application Processors and traditional microcontrollers by delivering application-processor-class compute in an MCU-style footprint. A crossover MCU (also called a crossover processor or hybrid MCU) is a class of microcontrollers that combines the high CPU performance and rich peripherals of an applications processor with the deterministic real-time response and ease-of-use of a microcontroller. The MIMXRT1064CVJ5B inherits this architecture, sitting in the broader taxonomy of microcontroller -> embedded MCU -> crossover MCU -> real-time control processor -> semiconductor. It is engineered for industrial IoT, HMI, and motor-control applications that demand both high throughput and deterministic real-time behavior. Key features include 4 MB on-chip flash, 1 MB SRAM (configurable as TCM, OCRAM, or DTCM), dual USB 2.0 OTG controllers with PHY, integrated 2D graphics acceleration engine (PxP), MIPI-CSI and parallel display interfaces, hardware encryption (AES, TRNG, secure boot), and 3x FlexCAN plus 2x Ethernet (10/100M). The 196-LFBGA package exposes a rich GPIO set and a wide peripheral mix designed to replace multi-chip MCU+DRAM solutions with a single BGA. The internal bus matrix and dual-issue pipeline allow the Cortex-M7 core to execute from tightly-coupled memory with single-wait-state access, enabling benchmark scores above 1280 CoreMark while keeping interrupt latency deterministic. On-chip regulators, integrated power management, and support for low-power modes make the device suitable for both line-powered industrial designs and battery-aware edge nodes. Typical applications include industrial human-machine interfaces, edge IoT gateways, motor control drives, audio subsystems, and graphics-rich consumer devices. The wide peripheral set also suits Point-of-Sale terminals, building automation, and connected appliances. Designers choose this part when they need Cortex-M7-class DSP and FPU throughput without migrating to a Linux-capable MPU. When designing with this device, allocate sufficient PCB copper under the BGA for thermal dissipation and route high-speed interfaces (MIPI-CSI, parallel display, RMII) with controlled-impedance traces. Plan supply sequencing for the multiple internal rails and follow the NXP hardware development guide for boot mode configuration (boot source, SD/eMMC, SPI flash) to avoid bricked prototypes. This page consolidates distributor pricing for the 196-LFBGA package, drop-in i.MX RT1064 family variants, and practical design considerations not always obvious from the manufacturer datasheet, helping procurement, EE, and firmware engineers choose the right crossover MCU for industrial and IoT designs.

RFQ Contact
MIMXRT1064CVL5A - 528MHz Cortex-M7 MCU 4MB Flash | NXP i.MX RT1064
MIMXRT1064CVL5A

MIMXRT1064CVL5A - 528MHz Cortex-M7 MCU 4MB Flash | NXP i.MX RT1064

The NXP Semiconductors MIMXRT1064CVL5A is a 32-bit crossover microcontroller built around the Arm Cortex-M7 core running at up to 528 MHz, with 4 MB of on-chip flash and 1 MB of on-chip SRAM, housed in a 196-pin LFBGA package. It provides real-time deterministic performance with rich multimedia peripherals, dual USB, 10/100 Mbit Ethernet, and an LCD controller suitable for industrial HMI. Background: A crossover microcontroller (cMCU) combines the deterministic real-time response of a microcontroller (MCU) with the high CPU performance and multimedia features typical of a microprocessor (MPU). The i.MX RT1064 belongs to the i.MX RT family, which occupies the architectural niche between traditional Cortex-M microcontrollers (no MMU, no on-chip flash) and Cortex-A microprocessors (full application processor). The 'RT' suffix signals real-time control with no external SDRAM requirement at boot because of the integrated 4 MB flash - this is the first i.MX RT family member to include on-chip flash according to NXP documentation. Key features include the 528 MHz Cortex-M7 core with single-precision and double-precision FPU, 4 MB on-chip flash, 1 MB on-chip SRAM (configurable as TCM and OCRAM), dual USB 2.0 with PHY, 10/100 Mbit Ethernet MAC, 8/16-bit CSI camera interface, 24-bit LCD controller up to WXGA resolution, and a wide range of serial interfaces (UART, SPI, I2C, I2S, FlexIO, FlexCAN, FlexPWM). The LFBGA-196 package provides ample I/O for industrial gateway, motor drive, and HMI applications. Typical applications include industrial HMI panels, IoT gateways, motor control and drives, audio subsystems, point-of-sale terminals, and smart appliance controllers. The integrated LCD controller and 2D graphics acceleration GPU enable cost-effective graphical touch interfaces without an external graphics controller. Design consideration: the LFBGA-196 package requires a 4-layer minimum PCB with microvia or laser-drilled via technology for fan-out. Plan for thermal copper mass under the exposed die paddle and verify IO bank voltage sequencing against the System Reset and Boot Mode Reference Manual before finalizing the schematic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ Contact
MIMXRT1064CVL5B - i.MX RT1064 Crossover MCU 600MHz | NXP
MIMXRT1064CVL5B

MIMXRT1064CVL5B - i.MX RT1064 Crossover MCU 600MHz | NXP

The NXP Semiconductors MIMXRT1064CVL5B is a high-performance crossover microcontroller built on the Arm Cortex-M7 core running at up to 600 MHz, integrating 4 MB of on-chip Flash and 1 MB of on-chip SRAM in a 196-ball MAPBGA package measuring 10x10 mm with 0.65 mm pitch. The device is the USB-equipped variant of the i.MX RT1064 family, targets industrial operating conditions from -40C to +105C, and combines MCU-class deterministic real-time response with application-processor multimedia throughput. A crossover MCU is a class of embedded processor that bridges the gap between traditional microcontrollers (deterministic, low-power, easy-to-use) and application processors (high performance, rich peripherals). By integrating a Cortex-M7 core with tightly coupled memory, large SRAM, and high-speed peripherals like USB 2.0 with PHY, the i.MX RT1064 lets designers run graphical user interfaces, audio pipelines, and edge inference workloads on a single chip without an external Linux MPU. Key features of the MIMXRT1064CVL5B include the 600 MHz Cortex-M7 with single-precision and double-precision FPU, 4 MB Flash, 1 MB SRAM, a dedicated 2D graphics accelerator (PxP), an LCDIF display controller supporting up to WXGA resolution, two USB 2.0 controllers (one with integrated HS PHY), two 12-bit ADC modules totaling 20 channels, FlexIO for flexible serial emulation, and a comprehensive security subsystem including High Assurance Boot and on-the-fly AES decryption (OTFAD). The 196-MAPBGA package provides sufficient I/O for demanding industrial designs while fitting within a 10x10 mm footprint. Architecturally, the RT1064 leverages NXP's advanced 40 nm low-power process and a sophisticated bus matrix that allows concurrent DMA-driven data movement between peripherals and SRAM, leaving the Cortex-M7 core free for application logic. The integrated LCDIF and PxP blocks offload display composition, allowing the core to focus on real-time control loops. Typical applications include industrial human-machine interfaces (HMIs), building automation control panels, point-of-sale terminals, edge IoT gateways with on-screen visualization, USB-equipped audio devices, and low-latency motor control with integrated display feedback. The wide temperature range and AEC-Q100-style qualification flow also make the part attractive in non-automotive industrial segments. When designing with this device, pay close attention to PCB layout: the 0.65 mm pitch MAPBGA requires microvia stack-ups and matched-length routing for the DDR-style memory interfaces. Confirm that your selected power management IC can deliver the dynamic load currents demanded by the Cortex-M7 at full speed. This page synthesizes distributor pricing, drop-in pin-compatible alternatives within the i.MX RT family, and practical PCB-layout and thermal design notes that go beyond what the datasheet alone provides.

RFQ Contact
MIMXRT1064DVL6A - i.MX RT1064 600MHz M7 Crossover MCU | NXP
MIMXRT1064DVL6A

MIMXRT1064DVL6A - i.MX RT1064 600MHz M7 Crossover MCU | NXP

The NXP Semiconductors MIMXRT1064DVL6A is an i.MX RT1064 crossover microcontroller combining an Arm Cortex-M7 core running at up to 600 MHz with 4 MB of on-chip flash and 1 MB of on-chip SRAM in a 196-ball LFBGA package (10 mm x 10 mm). The part is pin-to-pin compatible with i.MX RT1050 and i.MX RT1060 family members, allowing designs to migrate upward to additional flash density or to retain a single PCB layout across the family. What is a crossover MCU? A crossover microcontroller combines the high-performance real-time processing of a microcontroller (deterministic interrupt response, simple programming model) with the application-processor-like peripheral set and clock speed typical of an applications processor. The i.MX RT1064 sits in the power-management IC (PMIC) ecosystem between traditional Cortex-M4 MCUs and Cortex-A-class application processors, and is positioned in the broader NXP i.MX product family that also includes i.MX 6/7/8 application processors. Key features of the MIMXRT1064DVL6A include 4 MB on-chip flash (the first i.MX RT family to integrate on-chip flash), 1 MB on-chip SRAM with configurable RAM partitioning, and a rich peripheral set including dual USB 2.0 with PHY, dual CAN-FD, dual SDIO/eMMC, two SAI/I2S audio interfaces, two camera interfaces (CSI), an LCDIF controller for displays up to WXGA, a 10/100-Mbit Ethernet MAC, and hardware cryptography acceleration (AES, SHA, TRNG). The 600 MHz core delivers 1284 CoreMark and 3010 DMIPS, while an integrated FPU and DSP extensions accelerate floating-point and signal-processing code paths. Typical applications for the MIMXRT1064DVL6A include industrial HMI panels, audio subsystems with display, IoT edge gateways, point-of-sale terminals, motor control and home appliance controllers, and low-cost audio/video consumer devices. The on-chip flash reduces BOM cost and PCB area relative to i.MX RT parts requiring external QSPI flash. When designing with this MCU, allocate careful attention to decoupling (the 600 MHz core demands dense, low-impedance power distribution), PCB stackup (the 10 mm x 10 mm 196-LFBGA package has a 0.65 mm ball pitch and requires microvia PCB fabrication), and boot-mode configuration via the BOOT_MODE pins. DDR memory routing must follow length-matching rules documented in the hardware user guide. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ Contact
MIMXRT595SFFOC - 200MHz Cortex-M33 with 32MB Flash | NXP
MIMXRT595SFFOC

MIMXRT595SFFOC - 200MHz Cortex-M33 with 32MB Flash | NXP

The NXP Semiconductors MIMXRT595SFFOC is a 200 MHz Arm Cortex-M33 crossover microcontroller with 32 MB of octal flash memory, graphics acceleration, hardware encryption, and low-power operating modes in a 249-pin FOWLP package. The 7 x 7 mm package supports integrated external-memory interfaces and advanced human-machine-interface processing in a compact footprint. An i.MX RT crossover microcontroller combines the deterministic real-time control characteristics of a microcontroller with the high-level graphics and connected-processing capabilities normally associated with application processors. This positioning makes the MIMXRT595SFFOC suitable for industrial panels, building controls, medical terminals, gateways, and graphical embedded products that require responsive peripherals alongside sophisticated display support. Key features include a 200 MHz Arm Cortex-M33 processor core, 32 MB of octal flash, hardware encryption, graphics acceleration, and operation from 1.8 V, 2.5 V, or 3.3 V supply levels. NXP positions the device for secure, low-power Internet of Things applications. The on-chip flash also removes the need for a separate external boot-flash device in designs where its capacity and programming characteristics satisfy the application requirements. The part uses an integrated dual-core architecture combining a Cortex-M33 core with a Cortex-M7 core for higher-performance workloads. Its external memory interfaces allow designs to extend storage or connect additional peripherals, while dedicated graphics acceleration handles display-oriented workloads without placing the full burden on the general-purpose processor. Hardware encryption protects stored code and data against unauthorized access when the associated security features are enabled in the system design. Typical applications include industrial human-machine interfaces, smart-building control panels, medical-device user interfaces, connected gateways, and low-power IoT controllers. The 249-pin FOWLP package is supplied in a tray configuration. Board design should treat this package as a high-pin-count, fine-pitch assembly and follow the land pattern, escape-routing, and reflow guidance in the NXP data sheet. The main design consideration is that this MCU integrates substantially more flash and graphics capability than a conventional small Cortex-M33 device, so firmware architecture, external peripheral routing, and package escape routing require early planning. Confirm pin multiplexing, power sequencing, memory timing, and exposed-pad requirements against the current NXP documentation before committing the PCB layout. This page organizes the verified product characteristics of the MIMXRT595SFFOC together with application guidance, package details, design notes, and comparison parameters. It helps engineers evaluate the processor, memory configuration, security functions, graphics support, and power options before beginning hardware design.

RFQ Contact
MIMXRT633SFVKB - Dual-Core 300MHz Audio MCU | NXP
MIMXRT633SFVKB

MIMXRT633SFVKB - Dual-Core 300MHz Audio MCU | NXP

NXP Semiconductors MIMXRT633SFVKB is a dual-core crossover microcontroller in the i.MX RT600 family, combining a 300 MHz Arm Cortex-M33 processor with a Cadence Tensilica Xtensa HiFi 4 audio DSP. The device includes 4.5 MB of SRAM, FlexSPI with cache and dynamic decryption, high-speed USB device and host support with PHY, and a 12-bit ADC. It is packaged in a 176-ball VFBGA measuring 9 mm by 9 mm. A crossover microcontroller is a system-on-chip that combines the deterministic control strengths of an MCU with application-processor-level peripherals, memory bandwidth, and specialized acceleration. In the product hierarchy, MIMXRT633SFVKB belongs to the MCU class, within embedded processors and embedded SoCs. Its dual-core architecture is designed for connected audio products where real-time control, signal processing, and high-speed data movement must coexist on one device. The principal features include simultaneous Arm Cortex-M33 and Xtensa HiFi 4 processing, 4.5 MB of onboard SRAM, and 300 MHz Cortex-M33 operation. FlexSPI provides cached external-serial flash access with dynamic decryption, while the integrated USB interface supports both device and host roles. These resources allow audio firmware, user-interface logic, network connectivity, and storage functions to share a compact embedded platform. The architecture separates general-purpose control from specialized audio acceleration. The Cortex-M33 core handles interrupts, communications, peripheral configuration, and real-time application logic, while the HiFi 4 DSP targets intensive audio processing. Dedicated signal-processing capability can reduce the computational burden placed on the general-purpose core. FlexSPI caching and decryption support secure and efficient access to serial flash assets, although the final storage architecture remains application-dependent. Typical uses include immersive audio playback, voice user interfaces, connected speakers, smart displays, hearing and audio-processing systems, and industrial or consumer products with local media capabilities. The high-speed USB interface can support host or device connections, while FlexSPI accommodates external flash or serial peripherals. The 9 mm by 9 mm VFBGA package favors compact, high-density PCB designs but requires careful ball assignment, escape routing, thermal planning, and assembly-process control. Designers should preserve the voltage, decoupling, clock, reset, and high-speed routing requirements in the NXP MIMXRT633 family datasheet. Because this device integrates many high-speed functions in a fine-pitch BGA, power integrity, return paths, decoupling placement, and manufacturing capability should be reviewed before layout release. Firmware, boot configuration, memory mapping, and peripheral assignments must also be validated against the selected board configuration. This page combines the confirmed architectural features, package information, sourcing workflow, and design considerations of MIMXRT633SFVKB into an engineering-focused product reference. It also distinguishes true pin-compatible replacement constraints from broader functional alternatives that may require PCB, software, peripheral, and qualification changes.

RFQ Contact
MIMXRT685SFFOB - 300MHz Cortex-M33 + HiFi4 Audio DSP MCU | NXP
MIMXRT685SFFOB

MIMXRT685SFFOB - 300MHz Cortex-M33 + HiFi4 Audio DSP MCU | NXP

The NXP Semiconductors MIMXRT685SFFOB is a crossover microcontroller from the i.MX RT600 family that combines a 300 MHz Arm Cortex-M33 CPU with a Cadence Xtensa HiFi4 audio DSP core running up to 600 MHz, delivered in a 249-ball FOWLP (7x7 mm) package. It is aimed at audio, voice and consumer IoT designs where a single silicon device must execute application code and perform real-time audio signal processing simultaneously. A crossover MCU is a microcontroller that sits between general-purpose MCUs and application processors: it retains the deterministic real-time control, rich peripheral set and low-power characteristics of an MCU while adding enough DSP horsepower to decode, mix and render audio streams without an external DSP. The Cortex-M33 core includes two hardware coprocessors for enhanced performance, and the HiFi4 core provides the vector/floating-point throughput required for multi-channel audio processing. Key characteristics include a 300 MHz Arm Cortex-M33 application core, an Xtensa HiFi4 audio DSP core rated up to 600 MHz, dual-core operation in a single package, a 249-FOWLP (7x7 mm) footprint, and RoHS-compliant environmental compliance. The package size makes the device suitable for space-constrained consumer audio hardware such as soundbars, smart speakers, voice panels and Bluetooth or Wi-Fi audio dongles. Architecturally the part separates control-plane and signal-plane workloads: the Cortex-M33 runs RTOS or bare-metal control code, connectivity stacks and user interface logic, while the HiFi4 core is dedicated to audio acceleration such as mixing, resampling, decoding and voice wake-up processing. This division avoids a round trip through external SPI or I2S DSP links and reduces both latency and board area. Typical applications include smart speakers and voice assistants, soundbars, wireless and USB audio dongles, Bluetooth headset control planes, smart displays with voice interaction, and industrial voice panels or HMI units. The Cortex-M33 side handles USB, Ethernet and control peripherals, while the HiFi4 side handles the audio pipeline. A key design consideration is thermal and power budget: at 300 MHz the Cortex-M33 core and the 600 MHz HiFi4 core draw substantial dynamic current, so the board layout must provide low-impedance supply paths to the core rails and adequate exposed-pad heat spreading under the 7x7 mm FOWLP. Verify the exact core rail decoupling and maximum junction temperature limits in the NXP RT600 product documentation before finalizing a thermal design. This page consolidates distributor availability, same-package family alternatives and practical integration notes into a single engineering reference that goes beyond the manufacturer overview page.

RFQ Contact
MIMXRT685SFVKB Dual-Core 300MHz Audio MCU | NXP
MIMXRT685SFVKB

MIMXRT685SFVKB Dual-Core 300MHz Audio MCU | NXP

The NXP Semiconductors MIMXRT685SFVKB is a crossover microcontroller combining a 300 MHz Arm Cortex-M33 processor with a 600 MHz Cadence Xtensa HiFi4 audio DSP in a 176-VFBGA 9x9 mm package. The device targets immersive audio playback, voice user interfaces, and consumer IoT products that require real-time audio processing alongside general-purpose control. A crossover MCU is a semiconductor that integrates conventional microcontroller processing with specialized digital signal processing. In the product hierarchy, the MIMXRT685SFVKB belongs to the embedded processor, microcontroller, and mixed-signal audio-processing markets. Its Arm Cortex-M33 core handles control logic, connectivity, and peripheral management, while the Xtensa HiFi4 core accelerates audio workloads that would otherwise burden the main processor. The main architectural feature is the combination of two coprocessors with the Arm Cortex-M33 and Xtensa HiFi4 cores. The family includes 4.5 MB of SRAM and a peripheral set optimized for audio and voice products. FlexSPI support includes cache and dynamic decryption, while high-speed USB device and host capability with integrated PHY supports direct peripheral and host connectivity. The HiFi4 DSP can operate at up to 600 MHz, while the Arm Cortex-M33 can operate at up to 300 MHz. This division of labor allows audio algorithms to execute on the DSP while the microcontroller core manages system control, user-interface logic, data movement, and external interfaces. The 176-VFBGA package supports compact integration in advanced audio and consumer devices. Typical applications include smart speakers, voice-controlled audio systems, immersive audio playback devices, sound-bar controllers, connected headphones, and consumer IoT products with local voice processing. The architecture is also appropriate where a product needs responsive control firmware and high-throughput DSP in one device rather than in a separate processor arrangement. PCB design should preserve the pin assignments, power requirements, decoupling strategy, and high-speed routing constraints defined by the manufacturer datasheet. Because the package is dense and supports high-speed USB and memory interfaces, controlled impedance, short return paths, and solid ground-plane continuity are essential. Verify the exact pin description table before assigning board functions. This page consolidates the available manufacturer and distributor information, compares the architecture with other i.MX RT600 members, and adds application, sourcing, and design guidance for engineers evaluating the MIMXRT685SFVKB as an audio-focused crossover MCU.

RFQ Contact
MK02FN128VFM10 - 100MHz Cortex-M4 MCU, 128KB Flash | NXP
MK02FN128VFM10

MK02FN128VFM10 - 100MHz Cortex-M4 MCU, 128KB Flash | NXP

The NXP Semiconductors MK02FN128VFM10 is an entry-level Kinetis K02 32-bit microcontroller based on the ARM Cortex-M4 core with FPU, operating at up to 100 MHz and integrating 128 KB of program flash plus 16 KB of SRAM in a 32-pin HVQFN (5x5 mm) package. It is built on a low-leakage process and offers a streamlined peripheral set aimed at very low-power, cost-sensitive applications. A Kinetis K02 microcontroller belongs to the Kinetis family of ARM Cortex-M based MCUs from NXP. Within the broader taxonomy, this part sits as: Cortex-M4 microcontroller -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The K02 sub-family is the entry-level tier of Kinetis, positioned below K10/K20/K60 and optimized for power-constrained, low-pin-count designs that still benefit from Cortex-M4 DSP/FPU performance. Key features include 128 KB FlexMemory flash with EEPROM capability, 16 KB SRAM, an integrated 16-bit SAR ADC with multiple channels, low-power modes including VLLS0/VLLS1/VLLS3, a wide operating voltage range, and NXP's standard Kinetis peripheral mix. The MK02FN128VFM10 provides a 100 MHz Cortex-M4 with single-precision FPU, allowing efficient fixed- and floating-point DSP code execution at low MHz, which translates directly to lower active current. Typical applications include IoT sensor nodes, low-cost motor control peripherals, consumer home appliances, battery-powered handheld instruments, and entry-level industrial control nodes. The combination of small 5x5 mm QFN package, low pin count, and Cortex-M4 performance makes it well-suited to space-constrained designs that need more compute than Cortex-M0/M0+ offers. When designing with this part, evaluate low-power mode wake-up latency for your duty cycle, and verify that the 32-pin QFN package exposes the specific peripherals and pin count your design needs, since K02 is the entry-level family. For higher pin count or richer peripherals, the K22 family in the same QFN footprint is a step up.

RFQ Contact
MK10DN32VLH5 - Kinetis K10 50MHz Cortex-M4 MCU 32KB Flash 64-LQFP | NXP
MK10DN32VLH5

MK10DN32VLH5 - Kinetis K10 50MHz Cortex-M4 MCU 32KB Flash 64-LQFP | NXP

The NXP Semiconductors MK10DN32VLH5 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K10 sub-family, operating at up to 50 MHz with 32 KB of flash memory and 8 KB of SRAM, housed in a 64-pin LQFP package. It targets cost- and space-constrained embedded applications that need an integrated USB 2.0 device controller, low-power peripherals, and a small footprint. The MK10DN32VLH5 runs from a 1.71 V to 3.6 V supply and supports -40 °C to +105 °C operation, making it suitable for industrial environments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (flash), working memory (SRAM), and a configurable set of peripherals such as timers, ADCs, communication interfaces, and GPIOs. The Kinetis K10 sits in NXP's low-power MCU hierarchy under the broader Kinetis family, which in turn belongs to the 32-bit ARM Cortex-M embedded processor segment. MK10DN32VLH5 specifically combines a Cortex-M4 core (which adds single-precision FPU and DSP instructions) with Kinetis peripheral integration for baseline connected applications. Key features of the MK10DN32VLH5 include an integrated USB 2.0 full-speed device controller, multiple serial communication peripherals (UART, SPI, I2C), a 16-bit ADC, low-power run and wait modes, and a flexible interrupt controller (NVIC). The 64-pin LQFP package supports easy hand-soldering and prototype-friendly layouts, while still offering enough I/O for typical industrial sensor hubs and human-interface nodes. Technically, the MK10DN32VLH5 is built on a low-leakage CMOS process and uses NXP's standard Kinetis peripheral IP. The 50 MHz Cortex-M4 core delivers up to ~75 DMIPS, while the single-cycle flash and SRAM provide deterministic interrupt latency for real-time control loops. The USB device controller integrates a transceiver and dedicated buffer RAM, removing the need for an external PHY in many designs. Typical applications include industrial sensor interface modules, USB HID/CDC peripherals, small appliance control boards, building automation nodes, low-cost data loggers, and portable measurement instruments. The combination of a Cortex-M4 core, on-chip USB, and a 64-pin LQFP makes MK10DN32VLH5 especially well-suited for connected low-power embedded products. When designing with this part, plan the flash/RAM budget carefully: 32 KB flash limits the firmware footprint (including bootloader), while 8 KB SRAM constrains the largest data buffers. Use Kinetis BSP and Processor Expert (or the maintained NXP MCUXpresso SDK family) for clock setup, USB stack integration, and low-power mode configuration. This page synthesizes distributor pricing, same-family drop-in NXP alternatives, and practical design notes not found in the manufacturer datasheet front matter. All values are referenced to the NXP K10 sub-family datasheet and current distributor listings as of 2026-10-19.

RFQ Contact
MK10DN512VLK10 - Kinetis K10 512KB Flash 100MHz MCU | NXP | 80-LQFP
MK10DN512VLK10

MK10DN512VLK10 - Kinetis K10 512KB Flash 100MHz MCU | NXP | 80-LQFP

The NXP Semiconductors MK10DN512VLK10 is a Kinetis K10 family microcontroller based on the ARM Cortex-M4 core with FPU, delivering 100 MHz CPU performance, 512 KB of program flash, and 128 KB of SRAM, housed in an 80-pin LQFP package (12 x 12 mm, 0.5 mm pitch). The device targets low-power mixed-signal applications that require deterministic real-time control plus connectivity such as USB 2.0 full-speed OTG with on-chip transceiver. The MK10DN512VLK10 sits at the entry of the K10 sub-family, balancing analog integration, peripheral set and power consumption. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core implementing the Thumb-2 instruction set, an optional single-precision floating-point unit, DSP extensions, and a Nested Vectored Interrupt Controller (NVIC). Kinetis K-series MCUs belong to the wider NXP Kinetis portfolio, which itself is a sub-family of ARM Cortex-M based microcontrollers. They sit within the integrated circuit category of power management and embedded control devices. Compared with Cortex-M0/M0+ parts, the M4 adds DSP and FPU capability for motor control and signal processing; compared with Cortex-M7, it is lower-power and lower-cost while retaining sufficient performance for many industrial and consumer tasks. Key features include 512 KB dual-bank flash with EEPROM capability, 128 KB SRAM, high-speed 16-bit ADC, comparators, DAC, op-amps on-chip, USB OTG (full-speed) with integrated PHY, multiple serial peripherals (UART, SPI, I2C, I2S), low-power timer, RTC, and a 4-channel DMA. The on-chip analog integration reduces BOM for sensor conditioning and closed-loop control. Hardware security and tamper features plus a wide operating temperature range (-40C to +105C) make the part suitable for industrial and white-goods designs. The MK10DN512VLK10 uses a Cortex-M4 core with 3-stage pipeline, branch speculation, and configurable single-precision FPU. Memory is organized as 512 KB primary flash with flash access control and 128 KB system SRAM. Peripherals are interconnected via a crossbar switch with arbitration, allowing simultaneous DMA-driven transfers while the CPU executes application code. Typical applications include industrial control and HMI, low-cost motor drives, building automation, smart metering, USB peripherals, consumer electronics and medical instruments. The wide temperature range also supports outdoor and ruggedized installations. When designing with this part, allocate sufficient decoupling (100 nF + bulk) near each VDD/VSS pair and follow the LQFP-80 land pattern recommendations; for USB-OTG designs add the required 90-ohm differential routing and proper PCB stackup for the DP/DM traces.

RFQ Contact
MK10DN512VMC10 - Kinetis K10 100MHz Cortex-M4 MCU, 512KB Flash | NXP
MK10DN512VMC10

MK10DN512VMC10 - Kinetis K10 100MHz Cortex-M4 MCU, 512KB Flash | NXP

The NXP Semiconductors MK10DN512VMC10 is a 32-bit ARM Cortex-M4 Kinetis K10 microcontroller running at 100 MHz, integrating 512 KB of program flash and 128 KB of SRAM in a 121-pin MAPBGA (8x8 mm) package. The device belongs to the Kinetis K1x family and offers high-precision analog integration with 16-bit SAR ADC, 12-bit DAC, and 90 general-purpose I/O pins. What is a Kinetis K10 microcontroller? The K10 is a baseline-performance member of the NXP Kinetis family of ARM Cortex-M4 microcontrollers, designed for applications requiring strong analog integration and rich serial connectivity without the higher pin count or USB of K60/K70 devices. Within the product taxonomy, the K10 sits as: microcontroller -> ARM Cortex-M4 MCU -> Kinetis K family -> K1x sub-family -> K10 baseline MCU. This positions it for industrial measurement, EPOS terminals, flow meters, HVAC controllers, gaming peripherals, and remote sensor hubs. Key features include a 32-bit Cortex-M4 core with single-precision FPU and DSP instructions, 512 KB flash, 128 KB SRAM, USB 2.0 full-speed device controller, hardware encryption (AES), and a flexible low-power modes set. The peripheral mix covers CAN, I2C, IrDA, SDHC, SPI, UART/USART, and an external bus interface (EBI/EMI). DMA, PWM, low-voltage detect (LVD), power-on reset (POR), and a watchdog timer complete the system-level integration. The MK10DN512VMC10 builds on Kinetis' flash-in-segment architecture with 16-bit ADC and 12-bit DAC allowing direct sensor interface. The 100 MHz core delivers 1.25 DMIPS/MHz and supports Cortex-M4 DSP extensions and a single-precision floating-point unit. The 121-MAPBGA package exposes enough pins for parallel memory interfaces and rich peripheral concurrency in EPOS and industrial control designs. Typical applications include industrial flow meters, HVAC control panels, EPOS terminals, gaming controllers, and remote sensor gateways. Designers select this part when they need Cortex-M4 DSP performance with high-resolution analog but do not require full USB OTG, Ethernet, or the larger memory footprints of K60/K70. In circuit design, ensure the 121-MAPBGA land pattern follows JEDEC MS-034 with the central thermal pad soldered to a 4-layer inner copper pour. Decouple the VDDA supply with a 100 nF ceramic plus a 4.7 uF bulk capacitor within 5 mm of the pin to maintain ADC SNR. This page combines verified distributor pricing, drop-in compatible Kinetis alternatives, and practical design guidance that supplements the manufacturer's datasheet with PCB-level integration advice.

RFQ Contact
MK10DN512ZAB10R - Kinetis K10 ARM Cortex-M4 MCU 512KB WLCSP | NXP
MK10DN512ZAB10R

MK10DN512ZAB10R - Kinetis K10 ARM Cortex-M4 MCU 512KB WLCSP | NXP

The NXP MK10DN512ZAB10R is a Kinetis K10 family mixed-signal ARM Cortex-M4 microcontroller with 512 KB of program flash, packaged in a WLCSP (Wafer-Level Chip-Scale Package) form factor aimed at space-constrained embedded designs. The part integrates an ARM Cortex-M4 core running at up to 100 MHz, providing deterministic 32-bit processing for real-time control loops. Mixed-signal integration on this K10 die includes a 16-bit ADC, 12-bit DAC, comparators, and a flexible timer/PWM unit set, enabling direct interface to analog sensors and motor-control stages without external signal-conditioning ICs. A microcontroller (MCU) is a single-chip computer containing a processor core, non-volatile program memory, volatile data memory, and a fixed set of peripherals. Within the embedded hierarchy, an MCU sits below a microprocessor (MPU) because it integrates memory and peripherals on-die. Kinetis K-series MCUs target mixed-signal industrial applications, distinct from K-series L (low-power) and M (motor-control) derivatives. NXP Kinetis K10 sits in the value-line mixed-signal MCU segment, balancing analog integration, CPU performance, and low-power modes for portable instrumentation, factory automation, and consumer devices. Key features highlighted in the manufacturer datasheet include 512 KB flash, 128 KB SRAM, a 100 MHz Cortex-M4 core, integrated USB 2.0 full-speed OTG controller, multiple serial peripherals (UART, SPI, I2C), and a 12-channel DMA. The 16-bit ADC supports up to 16 single-ended inputs with hardware averaging, and the 12-bit DAC enables precise analog output for setpoint generation. The WLCSP package eliminates the lead-frame, reducing PCB area to roughly the silicon die size and offering excellent electrical performance at high frequencies. Low-power Run, Wait, Stop, and VLLS modes allow the device to draw microamps in deep sleep, suitable for battery-powered sensors. Typical applications include industrial sensor transmitters, portable medical instrumentation, USB peripherals, motor control for small BLDC/PMSM stages, and low-power IoT edge nodes where the mixed-signal front-end removes the need for separate ADC/DAC ICs. Designers typically choose the MK10DN512ZAB10R when PCB area is critical and on-board analog conversion is required. When sourcing, note that the trailing 'R' suffix denotes Tape and Reel packaging, while the 'AB10' segment encodes the 100 MHz speed grade and WLCSP package option.

RFQ Contact
MK10DN512ZVMB10 - Kinetis K10 Cortex-M4 MCU 100MHz 512KB | NXP
MK10DN512ZVMB10

MK10DN512ZVMB10 - Kinetis K10 Cortex-M4 MCU 100MHz 512KB | NXP

The NXP Semiconductors MK10DN512ZVMB10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K10 sub-family, delivering 100 MHz core performance with 512 KB of on-chip flash memory, an operating supply range of 1.71 V to 3.6 V, and an 81-ball MAPBGA (8x8 mm) surface-mount package. It belongs to the Kinetis K1x series of MCU devices. A microcontroller unit (MCU) is an integrated circuit that combines a processor core, nonvolatile program memory, SRAM, and a rich set of peripherals on a single die, sitting at the embedded-node level of the semiconductor hierarchy (microcontroller -> embedded processor -> semiconductor IC). MCUs such as the MK10DN512ZVMB10 execute real-time control firmware in products ranging from industrial automation equipment to consumer devices. Key features of the MK10DN512ZVMB10 include the ARM Cortex-M4 core with DSP instructions and single-cycle MAC, a 100 MHz maximum clock frequency, 512 KB flash program storage with a 1.71-3.6 V single-supply operating range, and the compact 81-terminal MAPBGA ball-grid package with 0.8 mm ball pitch. The device carries industrial temperature grade characteristics and is lead-free and RoHS compliant according to distributor data. Architecturally, the Kinetis K10 family combines the Cortex-M4 pipeline with NXP (formerly Freescale) mixed-signal peripherals, providing high computation throughput for digital control loops and signal processing within a low-power, single-supply design. Related package options in the same K10DN512 flash configuration include the LQFP-80 variant MK10DN512VLQ10, which NXP lists with 128 KB RAM and USB OTG support. Typical applications include industrial control systems, motor control, consumer electronics, and embedded instrumentation where a compact ball-grid MCU with substantial flash is required. The MAPBGA-81 footprint suits dense multi-layer PCBs where I/O count must exceed what QFP packages offer in the same area. Designers should plan the PCB land pattern and ball-map fanout early, since reworking BGA packages requires X-ray inspection capability, and supply for this part is limited to a small number of distributors including Rochester Electronics, a NXP-authorized aftermarket source. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing, lifecycle status, compliance data, and drop-in alternative analysis in one place.

RFQ Contact