PIC32MX775F256HT-80V/PT
PIC32MX775F256HT-80V/PT - 80MHz 32-bit MCU, 256KB Flash, USB, ETH, CAN | Microchip
The Microchip Technology PIC32MX775F256HT-80V/PT is a 32-bit MIPS M4K microcontroller from the PIC32MX5/6/7 family, integrating 256KB Flash, 64KB SRAM, 10/100 Mbps Ethernet MAC, USB-OTG, dual CAN, and 51 GPIOs in a 64-pin TQFP (10x10 mm) package operating at up to 80 MHz. It is the tape-and-reel, V-grade (-40C to +105C) variant of the PIC32MX775F256H silicon, optimized for industrial and harsh-environment designs requiring high-speed connectivity.
A 32-bit microcontroller (MCU) is a programmable processor with a 32-bit data path, on-chip Flash program memory, SRAM, and a peripheral set. MCUs form the control tier of embedded systems: sensor acquisition, communication stack execution, and actuator control all run on the MCU. The PIC32MX775 series adds integrated 10/100 Ethernet MAC, USB-OTG, and CAN, eliminating the external PHY/MAC bridge in connected designs. Within Microchip's portfolio, the PIC32MX5/6/7 family targets cost-sensitive connected nodes; higher-integration needs (DSP, graphics, larger memory) move to PIC32MZ.
Key features include 256KB Flash, 64KB SRAM, 80 MHz CPU with 1.56 DMIPS/MHz, 51 digital I/O, USB-OTG, dual CAN 2.0B, 10/100 Ethernet MAC (MII/RMII), 16-bit parallel master port, up to 6 UART, 4 SPI, 5 I2C, 16-bit timers and 5 PWM/OC channels, 16-channel 10-bit ADC at 1 Msps, and integrated DMA. The 2.3-3.6 V Vdd range simplifies 3.3 V system design.
The architecture combines a MIPS M4K 32-bit core with Microchip peripherals. Dedicated DMA channels offload UART/SPI/I2C/ADC transfers, freeing the CPU for protocol or application tasks. The Ethernet MAC is industry-standard MII/RMII; pairing with a Microchip KSZ8041 PHY yields a complete 10/100 link without glue logic.
Typical applications include industrial Ethernet gateways, CAN-bus bridges, USB-OTG device controllers, building-automation controllers, and embedded web-server modules. MPLAB Harmony framework and XC32 toolchain support firmware development.
When designing with this part, allocate a 4-layer PCB for Ethernet signal integrity, place the 0.1 uF decoupling within 5 mm of each Vdd pin, and ensure the V-temp grade is matched to your enclosure thermal profile.
This page synthesizes real distributor stock and pricing, drop-in V/I-grade alternatives, and design notes that complement the manufacturer datasheet for procurement and engineering decisions.
RFQ
Contact