بەرهەمەکان (3,600+)

ADS7812U - 12-Bit 40 kSPS Low-Power ADC | Texas Instruments
ADS7812U

ADS7812U - 12-Bit 40 kSPS Low-Power ADC | Texas Instruments

The Texas Instruments ADS7812U is a low-power, serial 12-bit sampling analog-to-digital converter with a 40 kSPS conversion rate, ±0.5 LSB maximum integral nonlinearity and differential nonlinearity, and a 16-pin SOIC package. Designed for single +5 V operation, it combines a 20 µs maximum conversion time with an easy-to-use serial interface for compact data-acquisition and control systems. A sampling ADC is a successive-approximation-register converter that samples an analog input and represents it with a 12-bit digital code. The ADS7812U belongs to the sampling ADC > ADC > analog-to-digital converter > integrated circuit hierarchy, combining low power consumption with enough precision for industrial measurement, test equipment, and digital signal processing. It can use an internal or external reference and supports multiple input ranges, allowing it to fit different sensor and signal-conditioning architectures. Key features include 12-bit resolution, a 40 kSPS sampling rate, a 20 µs maximum conversion time, and 72 dB minimum SINAD according to the manufacturer information. The converter also offers pin compatibility with the 16-bit ADS7813, which can simplify migration between 12-bit and 16-bit system designs when signal-chain requirements change. Maximum power dissipation is 35 mW, while power-down mode reduces consumption to 50 µW. The ADS7812U uses a serial interface to transfer conversion results to a microcontroller, DSP, or other digital controller. Its sampling architecture is appropriate for continuously updated analog measurements rather than very-high-rate waveform capture. The 72 dB minimum SINAD specification indicates that signal quality depends not only on nominal resolution but also on noise, reference stability, input-source impedance, and acquisition timing. Typical applications include industrial process-control loops, data-acquisition systems, test and measurement equipment, digital signal processing front ends, and portable instrumentation. Its 40 kSPS rate is suitable for sensors that change at human or machine-cycle speeds, while its low 35 mW maximum dissipation supports compact, low-power designs. Designers should follow the manufacturer pin and layout guidance, place input and reference components close to the converter, and account for source settling during each sample-and-hold acquisition. Because the exact pin assignments, input-range table, timing values, and recommended external-component values are not included in the supplied web excerpts, the complete manufacturer datasheet should be consulted before final schematic or PCB release. This page combines verified manufacturer and distributor information with application guidance, engineering considerations, and a conservative drop-in assessment. It distinguishes confirmed pin-compatible devices from functional alternatives and identifies missing technical details instead of estimating unverified values.

RFQ پەیوەندی
ADS7812U/1KG4 - 12-Bit 40kSPS Serial ADC SOIC-16 | Texas Instruments
ADS7812U/1KG4

ADS7812U/1KG4 - 12-Bit 40kSPS Serial ADC SOIC-16 | Texas Instruments

The Texas Instruments ADS7812U/1KG4 is a low-power, single +5V supply, 12-bit successive-approximation analog-to-digital converter with a maximum conversion time of 20 microseconds (40 kSPS sample rate), housed in a 16-pin SOIC (SO-16) plastic package. It integrates a 12-bit capacitor-based SAR ADC core with sample-and-hold, internal clock, internal reference, and a flexible SPI-compatible serial data interface that can synchronize to an internal or external clock. The /1KG4 suffix denotes a tape-and-reel, 1k-piece packaging variant on top of the standard industrial-grade ADS7812U device. An SAR (Successive Approximation Register) ADC is a converter architecture that performs a binary search through an internal capacitor DAC, converging on the input voltage in N clock cycles for an N-bit converter; this yields deterministic latency, low power, and excellent AC/dc performance at moderate sampling rates (typically up to ~1 MSPS). As part of the ADC hierarchy, the ADS7812U/1KG4 sits under the SAR ADC and 12-bit ADC families within precision converter ICs, the highest level of which is the data-converter / signal-chain IC taxonomy. Key features of this part include ±10 V, ±5 V, 0 V to 10 V, 0.5 V to 4.5 V, and 0.3 V to 2.8 V input-range configurability without external signal conditioning, ±0.5 LSB max INL and DNL, an easy-to-use serial interface, and pin-compatibility with the 16-bit ADS7813 family for upgrade-in-place designs. Typical INL of 0.0122% linearity and a 5 V single-supply rail make the part straightforward to drop into 5 V-only systems. Architecturally, the device combines a charge-redistribution capacitor DAC, a low-noise CMOS comparator, an SAR register, and an on-chip reference buffer; its serial interface supports several modes (synchronous external, asynchronous internal, and Daisy-Chain) for multi-channel digitizer boards, while its guaranteed 40 kSPS over the -40C to +85C industrial range makes it well suited to process control and instrumentation front-ends. Typical applications include industrial process control multiplexed analog front ends, multi-channel data-acquisition boards using its daisy-chain serial mode, 4-20 mA loop-powered sensor digitizers, portable instrumentation and battery-powered test gear, and direct upgrade paths in place of 12-bit ADCs where the system benefits from wider bipolar input ranges. When designing with this part, place the supply bypass capacitor (10 uF tantalum in parallel with 0.1 uF ceramic) within a few millimeters of the VDD pin and keep the analog input traces short and guarded; the converter's one-rail +5 V supply topology makes it well suited to noise-sensitive designs where a quiet analog plane is available, but it should not share an analog return with high-current switching nodes. This page synthesizes distributor pricing, datasheet-derived electrical characteristics, verified drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to help procurement and design engineers select and apply the ADS7812U/1KG4 confidently.

RFQ پەیوەندی
ADS7813P - 16-Bit, 40 kSPS Low-Power ADC | Texas Instruments
ADS7813P

ADS7813P - 16-Bit, 40 kSPS Low-Power ADC | Texas Instruments

The Texas Instruments ADS7813P is a low-power, single-channel 16-bit sampling analog-to-digital converter with a 40 kSPS conversion rate, single +5 V supply operation, and a 16-pin DIP package. It combines a complete capacitor-based successive-approximation converter, sample-and-hold circuit, reference circuitry, clock logic, and serial data interface in one device. The serial interface can operate with internal or external clocking and supports synchronization with common microcontrollers. An ADC is a data-conversion IC that transforms an analog voltage into a numeric value for processing, measurement, or control. Successive-approximation, or SAR, ADCs repeatedly compare the sampled input with a trial DAC and progressively refine the result. This architecture is appropriate for precision instrumentation, industrial measurement, data acquisition, and embedded control because it combines deterministic conversion behavior, serial digital output, and relatively low power consumption. The ADS7813P belongs to the ADC, data-converter IC, signal-processing IC, and semiconductor hierarchies. The ADS7813P provides 16-bit resolution, a sampling rate of up to 40 kSPS, and a maximum conversion time of 20 microseconds. It operates from a single +5 V supply and can be configured for several analog input ranges, including ±10 V, ±5 V, 0 V to 10 V, and 0.5 V to 4.5 V. A high-impedance input range from 0.3 V to 2.8 V is also supported. These input options make the converter adaptable to bipolar instrumentation signals, unipolar process-control voltages, and low-level sensor outputs when appropriate front-end circuitry is used. The converter is pin-compatible with the 12-bit ADS7812, enabling a simplified upgrade path when greater numerical resolution is required without changing the board footprint. Its capacitor-based SAR core uses a sample-and-hold stage to capture the input before successive comparison begins. The integrated reference, clock, and serial interface reduce the number of external components and simplify synchronization with embedded systems. Use the manufacturer pin-description table when assigning PCB signals because the exact physical pin functions and layout requirements must be followed without modification. Typical applications include precision digital voltmeters, process-control instrumentation, temperature measurement systems, laboratory data loggers, industrial sensor interfaces, and low-speed closed-loop monitoring. The 40 kSPS rate is suitable for continuously changing control or measurement signals rather than high-frequency waveform capture. An external buffer, protection network, or gain stage may be needed when the source impedance, common-mode voltage, or input range exceeds the converter's direct connection limits. Design the reference and analog input paths for low noise, and place the input and reference components close to the converter to minimize trace pickup. Confirm settling time, acquisition time, source impedance, and clock timing in the manufacturer datasheet. Account for conversion latency in the data-processing pipeline, and use the supported serial clock configuration to avoid readback errors during changing input conditions. This product page combines manufacturer specifications, sourcing information, package details, practical design guidance, and a structured comparison of documented ADS7813 family options. It is intended to help engineers evaluate the ADS7813P for low-power, high-resolution measurement designs and to plan PCB, signal-chain, and firmware integration with fewer engineering assumptions.

RFQ پەیوەندی
ADS7813PB - 16-Bit 40kHz SAR ADC | Texas Instruments
ADS7813PB

ADS7813PB - 16-Bit 40kHz SAR ADC | Texas Instruments

The Texas Instruments ADS7813PB is a low-power, 16-bit successive-approximation analog-to-digital converter with one analog input, a 40 kSPS sampling rate, and a 16-pin PDIP package. It operates from a single +5 V supply and supports an internal or external clock through a flexible SPI-compatible serial interface. An ADC is an interface device that converts a continuously varying analog voltage into a numerical value for processing by a microcontroller, digital signal processor, or industrial controller. The ADS7813 belongs to the successive-approximation, or SAR, ADC family within the broader data-acquisition and signal-conversion hierarchy. Its sampling architecture is appropriate for industrial measurement, instrumentation, control, and embedded systems that require higher resolution than a conventional 8-bit or 12-bit converter. Key characteristics include 16-bit resolution, 40 kSPS conversion throughput, ±2.0 LSB maximum integral nonlinearity, and at least 87 dB SINAD. The single +5 V supply simplifies system power planning, while the serial interface reduces the number of data lines required on a circuit board. The converter also uses either an internal or external clock, allowing the system designer to synchronize conversion timing with a local microcontroller or peripheral. The serial interface can operate with an internal or external clock and is described by Texas Instruments as SPI compatible. The ADS7813PB uses a 0.3-inch 16-pin plastic DIP package, which supports through-hole assembly and prototyping. A maximum conversion time of 20 microseconds establishes the basic acquisition-rate limit before system overhead and conversion-control requirements are considered. Typical applications include process-control instrumentation, pressure and temperature measurement, laboratory data acquisition, industrial sensor interfaces, and embedded control systems. The 16-bit resolution preserves small changes in analog input, while the 40 kSPS rate is sufficient for many slowly changing sensor signals. It is not intended for high-bandwidth waveform capture requiring substantially higher sampling rates. Design the input network to keep the analog signal within the converter's permitted input range, and follow the manufacturer datasheet when assigning digital signal timing and grounding. Use a stable reference arrangement, adequate bypass capacitance, and clean layout between the analog input, reference, digital interface, and supply pins. Verify acquisition timing with the external-clock option when deterministic system sampling is required.

RFQ پەیوەندی
ADS7813PG4 - 16-Bit 40kHz SAR ADC, ±10V Input | Texas Instruments
ADS7813PG4

ADS7813PG4 - 16-Bit 40kHz SAR ADC, ±10V Input | Texas Instruments

The Texas Instruments ADS7813PG4 is a 16-bit, successive-approximation (SAR) analog-to-digital converter that delivers 40 kHz throughput from a single +5V supply. Housed in a 16-pin PDIP (0.300 inch) through-hole package, the device integrates a sample-and-hold, clock, reference, and flexible SPI-compatible serial interface with daisy-chain (TAG) support. Input ranges are software-configurable for ±10V, ±3.3V, 0-10V, 0-5V and 0.5-4.5V, allowing direct connection to industrial sensor outputs without external signal conditioning. A successive-approximation ADC is a type of Nyquist-rate data converter that performs one bit-trial per clock cycle using a binary-weighted capacitor DAC and a comparator. SAR converters are valued for their deterministic latency, lack of pipeline delay, and excellent DC linearity, making them the dominant architecture for precision multi-channel data-acquisition systems, weigh scales, and process-control front ends. The ADS7813 family fits into the wider Texas Instruments precision ADC portfolio alongside pin-compatible 12-bit ADS7812 and faster successive-approximation members such as the ADS8509. Key specifications include 16-bit resolution, 40 kHz maximum sampling rate, 20 µs maximum conversion time, ±10V bipolar or unipolar input ranges, single +5V supply operation, and an operating temperature range of -40°C to +85°C. The pin-compatible ADS7812 (12-bit) and ADS7809 share the same 16-pin DIP and SO-16 footprints, simplifying upgrades and downgrades in the same PCB layout. The G4 suffix indicates Pb-free (lead-free) assembly to RoHS-compliant standards. Typical applications include industrial process control, multi-channel data acquisition, battery monitoring, isolated transducer front ends, weigh scales, and portable instrumentation. The ±10V true bipolar input makes the ADS7813PG4 particularly attractive for direct digitization of 4-20 mA loop outputs when used with a sense resistor. The internal or external reference option allows designers to trade off absolute accuracy against system cost. When designing with this device, place 0.1 µF ceramic bypass capacitors close to the +VD and +VS pins and keep analog and digital grounds separated to a single star-point under the IC. The TAG (daisy-chain) feature allows multiple converters to share one serial bus, reducing digital isolation cost in multi-channel isolated systems. Power dissipation is typically low because of the SAR architecture's duty-cycled analog front end. This page synthesizes verified distributor pricing, drop-in pin-compatible alternatives from the ADS7812/ADS7813 family, and practical layout guidance not found in the bare datasheet, giving engineers a single decision-ready reference for both new designs and legacy through-hole retrofits.

RFQ پەیوەندی
ADS7813U - 16-Bit SAR ADC, 20 µs, 5V | Texas Instruments
ADS7813U

ADS7813U - 16-Bit SAR ADC, 20 µs, 5V | Texas Instruments

Texas Instruments ADS7813U is a low-power, serial 16-bit sampling analog-to-digital converter with one SAR input, a maximum conversion time of 20 µs, single +5 V supply operation, and a 16-pin SOIC package. It accepts bipolar and unipolar input ranges, including ±10 V, ±5 V, 0 V to 10 V, and 0.5 V to 4.5 V. A sampling ADC is a data-conversion device that acquires an analog voltage with a sample-and-hold circuit and converts it into a digital value through successive approximation. The ADS7813 belongs to the SAR ADC hierarchy, where the conversion register compares the sampled input against a trial DAC value. This architecture is appropriate for instrumentation and industrial systems requiring deterministic conversion timing, serial output, and moderate conversion speed without a continuous clock. The ADS7813 integrates a complete 16-bit capacitor-based SAR converter, sample-and-hold circuitry, clock, reference, and serial interface. Its maximum conversion time is 20 µs, while its serial interface supports straightforward communication with embedded processors. Configurable input ranges provide flexibility for bipolar instrumentation signals and single-ended industrial sensor outputs, reducing the need for external range-switching hardware. Operation from a single +5 V supply simplifies system power architecture, and the low-power design supports battery-instrumented and space-constrained equipment. The converter is available in a 16-pin SOIC package, identified by TI ordering code DW, with an operating temperature range of −40 °C to +85 °C. Its 16-bit resolution provides 65,536 nominal code levels, making it useful for measurements requiring more precision than a typical 12-bit converter. Typical uses include industrial process measurement, laboratory data acquisition, sensor-interface modules, panel instrumentation, and embedded control systems. The serial interface helps reduce connection count, while selectable input ranges support bipolar sensor conditioning and unipolar transducer outputs. System designers must still account for input bandwidth, reference accuracy, source impedance, digital-interface timing, and analog noise when establishing achievable measurement precision. A practical design consideration is that the nominal 16-bit resolution does not guarantee 16-bit absolute accuracy. Reference-voltage error, offset, gain error, comparator behavior, input-source impedance, and PCB noise can reduce end-to-end accuracy. The manufacturer datasheet should be used to select grounding, decoupling, reference-capacitor, and analog-layout arrangements for the selected input range. This page consolidates verified manufacturer and distributor information, explicitly identified package and lifecycle details, practical ADI signal-chain companions, drop-in alternatives, and engineering guidance that are not presented as a substitute for the complete manufacturer datasheet. Pricing shown here reflects the verified distributor observation as of 2026-10-29.

RFQ پەیوەندی
ADS7813UB/1K - 16-Bit 40kHz SAR ADC, Serial, SOIC-16 | Texas Instruments
ADS7813UB/1K

ADS7813UB/1K - 16-Bit 40kHz SAR ADC, Serial, SOIC-16 | Texas Instruments

The Texas Instruments ADS7813UB/1K is a low-power, single +5V supply, 16-bit sampling successive-approximation-register (SAR) analog-to-digital converter with a 40 kHz throughput and a flexible SPI-compatible serial interface, housed in a 16-pin SOIC (DW) package and shipped on a 1k-unit tape-and-reel. The /1K suffix is a TI packaging code indicating a 1000-piece reel, and the UB grade indicates the SO-16 wide-body package. Headline parameters: 16-bit resolution, 40 kSPS maximum sample rate, 20 microseconds maximum conversion time, single-channel single-ended input with unipolar range, internal or external reference option, and a wide -40C to +85C industrial operating range. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision data converter that uses an internal binary-search algorithm to convert an analog input into a digital code over a fixed number of clock cycles. SAR ADCs sit in the broader signal-chain hierarchy of sensor front end -> analog front end -> ADC -> digital processor, and they are valued for their deterministic latency, excellent DC linearity, low power, and small size compared to delta-sigma or pipeline converters. The ADS7813UB/1K is pin-compatible with the 12-bit ADS7812, allowing a single PCB layout to serve both precision grades. Key differentiating features include: 20 microseconds max conversion time (50 kHz internal oscillator), no missing codes at 16 bits, SPI/QSPI/MICROWIRE-compatible serial interface synchronizable to an internal or external clock, a high-impedance analog input stage capable of 10V input span when using an external 5V reference, and a power-down mode that reduces quiescent current between conversions for battery-friendly operation. Internal self-calibration of linearity and offset is performed at power-up. According to TI's product page, the part is rated for the industrial -40C to +85C temperature range. The device integrates an input sample-and-hold, a precision capacitor-based SAR core, an internal 2.5V reference (with optional external reference override), and a serial output engine. The low-noise architecture and 100 dB typical SNR (when using the internal reference and 0-5V input) make it suitable for precision instrumentation where DC accuracy is paramount. The 16-pin SOIC package ensures compatibility with industry-standard SMT assembly lines and hand-solderable prototype rework. Typical applications include industrial process control loop measurement (4-20 mA or 0-10V transducer digitization), precision weigh scales and load-cell digitizers, portable battery-powered data loggers, isolated sensor front ends, multi-channel multiplexed data acquisition boards paired with an external analog mux, and medical instrumentation signal chains. The wide input range (with 5V reference) supports direct connection to bridge sensors and instrumentation-amp outputs. Design consideration: ensure the source impedance at the analog input is low (below 1 kOhm recommended) to avoid gain error and settling issues caused by the input sampling capacitor; add an external RC anti-alias filter. The internal reference is trimmed but can be overridden with an external 2.5V or 5V reference for better absolute accuracy or ratiometric measurements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
ADS7815U - 16-Bit 250 kSPS SAR ADC | Texas Instruments
ADS7815U

ADS7815U - 16-Bit 250 kSPS SAR ADC | Texas Instruments

The Texas Instruments ADS7815U is a 16-bit, 250 kSPS, single-channel SAR analog-to-digital converter with a single-ended input and parallel output interface, housed in a 28-pin SOIC (DW) package. It combines a 16-bit capacitor-based SAR converter, inherent sample-and-hold function, precision reference, and internal clock in one CMOS device. The ADC operates across -25°C to +85°C and is specified for 96 dB minimum SFDR and 84 dB minimum SINAD with a 100 kHz full-scale input. What is a SAR ADC? A successive-approximation-register analog-to-digital converter samples an analog input and determines each successive bit through repeated internal comparison and capacitor-DAC conversion. Unlike a pipeline ADC, this architecture generally combines lower power, lower cost, and direct conversion with useful resolution for instrumentation and industrial control. Within the broader semiconductor hierarchy, the ADS7815U is an ADC, a data-converter IC, and a signal-chain device used for precision measurement and digital control. The ADS7815U provides a throughput rate of 250 kSPS, 16-bit resolution, one single-ended analog channel, and an internal sample-and-hold, reference, and clock. Its stated dynamic performance includes 96 dB minimum SFDR and 84 dB minimum SINAD for a 100 kHz full-scale sine-wave input. These figures make the converter appropriate for systems requiring clean digitization of mid-frequency analog signals while retaining a straightforward parallel data path. Technically, the device uses a capacitor-based 16-bit SAR conversion stage and an inherent sample-and-hold network. The parallel interface exposes converted data without requiring a serial protocol, which can simplify connections to older microcontrollers, DSPs, FPGA logic, or data-capture systems. Because this is a parallel-output device, system-level design must address the 16-bit data bus, control signals, reference bypassing, analog-input conditioning, and timing margins around each conversion. Typical uses include industrial process measurement, laboratory instrumentation, sensor-interface modules, communications equipment, audio digitization, and embedded data-acquisition systems. Its 250 kSPS throughput is particularly relevant where the input bandwidth is limited but precision and deterministic conversion timing matter. The 96 dB SFDR figure indicates that harmonics can remain well below the fundamental for the specified 100 kHz test condition, while 84 dB SINAD describes combined noise-and-distortion performance. A primary design consideration is analog signal integrity. The input should be bandwidth-limited and referenced to the converter's single-ended input range, while supply and reference decoupling should be placed close to their associated pins. The parallel output timing and any required output buffering must also be checked against the host processor. Because the verified snippets do not provide the complete pin names or absolute input limits, designers should confirm those details in the Texas Instruments ADS7815 datasheet before layout release. This page consolidates the verified manufacturer and distributor facts for ADS7815U, compares same-package family alternatives, identifies missing pin-level and pricing information, and adds practical application and selection guidance that should be checked against the latest official datasheet.

RFQ پەیوەندی
ADS7816P - 12-Bit 200kHz SAR ADC | Texas Instruments
ADS7816P

ADS7816P - 12-Bit 200kHz SAR ADC | Texas Instruments

Texas Instruments ADS7816P is a 12-bit, 200 kHz sampling analog-to-digital converter with a differential input, synchronous serial interface, and low-power operation with automatic power-down, housed in an 8-pin plastic mini-DIP package. It accepts a 4.5 V supply and supports a reference voltage from 100 mV to 5 V, corresponding to output resolutions from 24 µV to 1.22 mV. A sampling ADC is a data-acquisition IC that samples an analog voltage at discrete instants and converts each sample into a digital code. The ADS7816P belongs to the SAR ADC family, a successive-approximation architecture that determines each output bit sequentially. Its 12-bit resolution supports 4096 digital codes, making it suitable for industrial monitoring, instrumentation, and systems that need modest measurement resolution at a relatively high sampling rate. The principal advantages are a 200 kHz sampling rate, a differential input architecture, and automatic power-down with only 3 µA maximum power-down current. The differential input can reject common-mode noise when the source is balanced around a midpoint. The synchronous serial interface provides a compact, deterministic connection to a controller, while automatic shutdown reduces consumption when conversions are infrequent. The 4.5 V operating supply is convenient for conventional 5 V industrial systems when suitable tolerances and bypass capacitors are used. The reference voltage defines the converter’s input range and least-significant-bit weight. With a 100 mV reference, one code represents approximately 24 µV; with a 5 V reference, one code represents approximately 1.22 mV. A small reference therefore improves sensitivity around a narrow signal range but also reduces full-scale headroom. Differential input voltage must remain within the device’s specified common-mode and full-scale limits, so the analog front end must be designed before selecting the reference range. Typical uses include factory process monitoring, temperature and pressure sensor acquisition, battery and power-system measurements, remote data acquisition, and isolated or noisy industrial environments where a differential input improves signal integrity. The synchronous serial interface also suits systems that need predictable sampling timing rather than a free-running parallel data bus. For these applications, reference accuracy, source impedance, and converter timing are as important as the nominal 12-bit resolution. The principal design consideration is analog signal conditioning. Keep the differential input traces short, route them away from switching circuitry, and follow the manufacturer’s input-capacitance recommendations. Provide stable supply and reference bypassing, verify the input common-mode range in the worst case, and account for source settling time between conversions. These practices help preserve the practical accuracy expected from a 12-bit converter. This page consolidates the core electrical characteristics, package information, design guidance, application examples, and sourcing structure for the ADS7816P, adding engineering-focused context to the manufacturer’s basic ordering and conversion data.

RFQ پەیوەندی
ADS7816PB - 12-Bit 200 kHz SAR ADC | Texas Instruments
ADS7816PB

ADS7816PB - 12-Bit 200 kHz SAR ADC | Texas Instruments

Texas Instruments ADS7816PB is a 12-bit, 200 kHz sampling analog-to-digital converter with a differential input, synchronous serial interface, automatic power-down, and an 8-PDIP package. Its reference voltage can range from 100 mV to 5 V, providing a corresponding resolution from 24 µV to 1.22 mV. The device combines a 12-bit conversion result with low-power operation suited to compact, battery-powered measurement systems. A sampling ADC is a data-converter category that converts continuous analog voltage into discrete numeric codes. The ADS7816 belongs to the SAR ADC family, where a successive-approximation register completes one conversion through a sequence of internal comparisons. Within the broader hierarchy, it is an analog-to-digital converter, data-converter IC, and semiconductor designed for embedded measurement and control systems. The principal features are 12-bit resolution, a 200 kHz sampling rate, differential input capability, and a synchronous serial interface. Automatic power-down reduces consumption when conversions are not continuous. A configurable reference from 100 mV to 5 V lets the designer trade signal range against sensitivity: the manufacturer describes resolution ranging from 24 µV to 1.22 mV across that reference range. These characteristics are useful for sensor interfaces, industrial controls, and portable instruments. The ADS7816 uses a differential input arrangement, which helps reject common-mode voltage and supports direct sensing of small voltage differences. Its synchronous serial interface transfers conversion results through clocked digital signals and allows the acquisition timing to be coordinated with a controller. Automatic power-down is particularly valuable in intermittent measurement systems where duty cycling can reduce energy use between conversion events. Typical applications include battery-operated data loggers, industrial process monitoring, portable instrumentation, control-loop sensing, and low-power embedded measurement. For sensor outputs, the differential input can represent the difference across a bridge or other sensor network. For portable systems, automatic power-down supports duty-cycled acquisition. The 200 kHz rate provides enough throughput for multiple analog channels multiplexed under a controller when application timing permits. When designing the circuit, follow the manufacturer’s recommended input and reference network, terminate the serial interface appropriately, and account for acquisition time before reading a new conversion. Differential input routing should minimize mismatch between signal and return paths. Reference stability directly influences accuracy, so reference bypassing and grounding deserve as much attention as the analog input itself. This page combines the manufacturer’s core conversion specifications with practical application guidance, interface considerations, and a disciplined replacement checklist. It is designed to help engineers evaluate the ADS7816PB for compact, low-power data-acquisition designs without overlooking package, reference, or pin-level constraints.

RFQ پەیوەندی
ADS7816PC - 12-Bit 200kHz Micropower SAR ADC | Texas Instruments
ADS7816PC

ADS7816PC - 12-Bit 200kHz Micropower SAR ADC | Texas Instruments

The Texas Instruments ADS7816PC is a 12-bit, 200kHz sampling successive-approximation analog-to-digital converter with a differential input, synchronous serial interface, and automatic power-down function. It accepts a reference voltage from 100mV to 5V and is housed in an 8-pin plastic mini-DIP package. The device is designed for low-power data acquisition, remote sensing, instrumentation, and isolated measurement systems. An ADC is an analog-to-digital converter, a type of data-converter IC that converts an analog voltage into a digital code for processing, measurement, or transmission. The ADS7816 belongs to the SAR ADC family, which uses a successive-approximation conversion process. Its differential input architecture supports measurement of a voltage difference between two analog nodes, making it useful when signal integrity, common-mode rejection, or referencing to a sensor midpoint is important. The ADS7816PC provides a 200kHz sampling rate and 12-bit resolution, corresponding to 4096 possible digital codes. The manufacturer states that the reference voltage can vary from 100mV to 5V, with corresponding resolution from 24uV to 1.22mV. The device also supports automatic power-down, with a maximum power-down current of 3uA, helping preserve energy in intermittent measurement systems. A synchronous serial interface provides a compact connection to a controller or digital signal processor. The serial interface and differential input structure are suitable for designs requiring predictable conversion and digital data transfer without a parallel ADC bus. The 8-pin mini-DIP package is useful for through-hole prototypes, educational platforms, industrial control assemblies, and legacy system upgrades. The converter’s low-power operating mode is particularly advantageous when the acquisition system wakes periodically to measure an analog quantity and then returns to a low-consumption state. Typical applications include industrial process monitoring, sensor signal acquisition, laboratory measurement equipment, battery-powered instrumentation, and remote or isolated data-acquisition systems. In these applications, the differential input can reduce sensitivity to ground noise when the sensor output is referenced to a biased midpoint. The serial output also reduces the number of signal paths required between the converter and the system controller. When laying out the circuit, keep the analog input, reference, and ground connections short and place input and reference bypass capacitors close to their corresponding pins. Use the manufacturer pin-description table when assigning PCB tracks, and confirm that the selected reference voltage provides sufficient analog input range for the source. For low-power systems, verify wake-up timing and serial-interface timing after power-down before relying on automatic shutdown during the measurement cycle.

RFQ پەیوەندی
ADS7816U - 12-Bit 200 kHz Micropower ADC | Texas Instruments
ADS7816U

ADS7816U - 12-Bit 200 kHz Micropower ADC | Texas Instruments

Texas Instruments ADS7816U is a 12-bit, high-speed, micropower sampling analog-to-digital converter with a 200 kHz sampling rate, automatic power-down, a synchronous serial interface, and a differential analog input in an 8-pin SOIC package. Its reference voltage can vary from 100 mV to 5 V, producing a corresponding resolution range of 24 µV to 1.22 mV. A sampling ADC is a signal-conversion device that samples an analog voltage at a controlled rate and converts each sample into a digital value. The ADS7816 belongs to the SAR ADC hierarchy, where successive approximation converts the sampled voltage through a comparator and internal digital network. It is therefore a data converter IC used for precision measurement, signal capture, and embedded control rather than an amplifier, sensor, or digital communications transceiver. The main advantages of the ADS7816U are its 12-bit conversion resolution, 200 kHz throughput, differential input, and low-power operation. Automatic power-down limits the power-down current to 3 µA maximum. The manufacturer also identifies micropower operation at 12.5 kHz, making the converter suitable for systems that alternate between active conversion and low-power intervals. Its synchronous serial interface supports compact circuit implementations and straightforward connection to serial processors. The differential input structure is particularly useful when the measured signal requires rejection of common-mode noise. Engineers can use the two input pins to sample a voltage difference rather than relying on a single-ended node referenced to ground. The adjustable reference range allows the converter to be scaled for smaller signals, although the exact input range, offset, gain error, and noise specifications must be confirmed against the manufacturer datasheet before production design. Typical uses include industrial sensor acquisition, battery-powered measurement instruments, process-control loops, portable diagnostic equipment, and embedded systems that digitize low-to-moderate-bandwidth analog signals. The 200 kHz sampling rate is appropriate for continuous monitoring and control signals but not for high-frequency waveform capture requiring substantially greater sample rates. Design should include a clean reference source, suitable input conditioning, decoupling close to the supply and reference pins, and careful routing of the differential and serial signals. The reference voltage directly determines the conversion scale, while the difference between input and reference voltages must remain within the device's supported operating limits. Differential input filtering and guarding can help reduce errors from unequal source impedances. This page combines verified manufacturer and distributor information with practical application guidance, explicit data gaps, and a conservative drop-in alternative assessment. It distinguishes verified function and package compatibility from changes that still require board-level validation, providing more engineering context than a distributor listing alone.

RFQ پەیوەندی
ADS7816UB/2K5G4 - 12-Bit 200kS/s MicroPower SAR ADC | Texas Instruments
ADS7816UB/2K5G4

ADS7816UB/2K5G4 - 12-Bit 200kS/s MicroPower SAR ADC | Texas Instruments

The Texas Instruments ADS7816UB/2K5G4 is a 12-bit, 200 kHz sampling, micro-power, successive-approximation-register (SAR) analog-to-digital converter (ADC) supplied in an 8-pin SOIC (D) package with tape-and-reel packaging (suffix /2K5) and RoHS-compliant lead-free finish (G4). The /2K5G4 ordering code denotes a 2,500-piece reel of the UB-grade (unbuffered, SOIC-8) variant qualified for commercial and industrial -40C to +85C operation, with differential analog inputs and a synchronous serial (SPI/SSI-compatible) digital interface. The device includes an internal 2.5V reference (with +IN/-IN 100mV to VCC input range), automatic power-down between conversions consuming only 3uA, and conversion time of 3.75us. According to the TI datasheet front matter, the part achieves 0.0488% linearity error (max) and supports 0-5V analog input range, making it suitable for data acquisition systems where board space, power, and pin count are constrained. An SAR (successive-approximation-register) ADC is the dominant low-power, medium-speed precision converter architecture used in microcontrollers, industrial sensors, and portable instrumentation. SAR ADCs operate by sequentially testing each bit of the digital output against the analog input using an internal precision DAC and comparator, delivering one conversion per trigger with deterministic latency and excellent DC accuracy. Within TI's converter portfolio, the ADS7816 sits at the low-power/small-package end of the SAR family, trading raw speed for sub-100uW active power and stand-alone (no external reference or buffer required) simplicity. Key differentiators of the ADS7816UB/2K5G4 include its 200 kHz maximum sampling rate (much higher than typical 8-/10-bit micropower ADCs), ultralow 1.5 mW active power consumption, automatic power-down that drops quiescent to 3 uA between conversions, and a true differential analog input stage that rejects common-mode noise in noisy industrial environments. The flexible reference input (REF = +IN to +IN +/- 100mV range) lets the user trade resolution for input range in software, while the synchronous serial interface frees board pins in MCU-equipped designs. Typical applications for the ADS7816UB/2K5G4 include battery-powered handheld instrumentation (digital multimeters, portable medical monitors), isolated industrial sensor front-ends (4-20 mA loop digitization, thermocouple/J- or K-type readouts), and embedded control systems (PLC analog input modules, HVAC controllers) where 12-bit ENOB and 200 kHz throughput exceed requirements and 8-pin SOIC footprint replaces larger 14-/16-pin ADC solutions. The small footprint also makes it attractive for multi-channel systems built from multiple ADS7816s multiplexed to one MCU serial port. When designing with this converter, observe that the analog inputs are pseudo-differential and require DC biasing; the serial clock must remain inactive when CS# is high; and the internal reference must be bypassed with 0.1uF + 10uF ceramic capacitors placed within 5 mm of the REF pin. Decouple AVDD with a separate 0.1uF + 10uF pair routed independently to a single ground star point. This page synthesizes distributor pricing, pinout, drop-in alternatives, and practical design notes that go beyond the datasheet's typical-application page.

RFQ پەیوەندی
ADS7817EC - 12-Bit 200kHz Differential SAR ADC | Texas Instruments
ADS7817EC

ADS7817EC - 12-Bit 200kHz Differential SAR ADC | Texas Instruments

The Texas Instruments ADS7817EC is a 12-bit, 200kHz sampling analog-to-digital converter with a high-impedance fully differential analog input, supplied in an 8-pin VSSOP package. It accepts a reference voltage from 100mV to 2.5V and provides a corresponding input-referred resolution between 49uV and 1.22mV. The device combines differential measurement, low power consumption, automatic power-down, and a compact package for precision signal-chain designs. A sampling ADC, or successive-approximation-register ADC, converts a continuously changing analog voltage into a digital code through repeated internal comparisons. The ADS7817EC belongs to the ADC hierarchy within data-converter and signal-chain semiconductors. Its differential input is particularly useful when the measured signal must reject common-mode noise, while its high input impedance allows direct connection to sensors, resistive bridges, and other transducers without an input buffer. The principal features include 12-bit resolution, a maximum sampling rate of 200kHz, and a flexible reference range of 100mV to 2.5V. The smallest reference voltage produces a finer input-referred step of 49uV, while the largest reference produces a 1.22mV step. Automatic power-down helps reduce consumption when conversions are infrequent, and the differential architecture supports measurement of signals centered around a common-mode voltage. Internally, the ADS7817EC uses a successive-approximation conversion process and communicates through a serial interface. The small signal range makes reference selection a central part of the analog design: lowering the reference increases resolution near the input but reduces the available full-scale range. Designers should therefore balance sensitivity, headroom, input-common-mode limits, and conversion noise rather than selecting the reference solely from the converter’s nominal resolution. Typical uses include battery-powered instrumentation, remote data acquisition, industrial sensor interfaces, precision bridge measurements, and low-power embedded systems. A differential sensor output can be connected directly to the analog inputs when its common-mode voltage and output span satisfy the device limits. The 200kHz sampling rate also permits measurement of slowly varying analog quantities and higher-frequency signals where the required aliasing and acquisition filtering can be implemented externally. The main design consideration is preserving the differential signal path from the source to the converter. Short traces, symmetric routing, adequate input filtering, and careful grounding help limit errors and coupling. Reference bypass capacitors should be placed close to the device, and the analog and digital return paths should be arranged to minimize shared impedance, particularly when the converter operates beside switching circuitry. This product page consolidates the Texas Instruments specifications, package information, pricing evidence, application guidance, and engineering design notes needed to evaluate the ADS7817EC. It also distinguishes true pin-compatible alternatives from reel-format and orderable-suffix variants so procurement and engineering decisions can be made without changing the circuit unintentionally.

RFQ پەیوەندی
ADS7817P - 12-Bit 200 kSPS Differential ADC | Texas Instruments
ADS7817P

ADS7817P - 12-Bit 200 kSPS Differential ADC | Texas Instruments

Texas Instruments ADS7817P is a 12-bit, 200 kSPS sampling analog-to-digital converter with a fully differential, high-impedance analog input and an 8-pin plastic mini-DIP package. Its reference voltage can vary from 100 mV to 2.5 V, providing input-referred resolutions from 49 µV to 1.22 mV. The converter combines a compact footprint with low power operation and automatic power-down, making it suitable for battery-powered instrumentation, remote data acquisition, transducers, and multichannel measurement systems. An ADC is a data-acquisition and data-conversion IC that converts an analog voltage into a digital code for processing, measurement, storage, or transmission. Within the broader semiconductor hierarchy, the ADS7817P is a sampling ADC, then a data-converter IC, and ultimately an interface or data-acquisition IC. Its differential architecture is especially useful when the measured signal is centered around a common reference voltage or when rejecting common-mode noise is important. The principal features of the ADS7817P include 12-bit resolution, a 200 kSPS conversion rate, and differential analog input. The flexible 100 mV to 2.5 V reference range allows the same converter to serve both small-signal sensor measurements and higher-range industrial instrumentation. Automatic power-down helps reduce energy consumption when the converter is not continuously sampling, which is valuable in portable acquisition systems where duty cycling is common. Each conversion produces a 12-bit result. The usable code resolution depends on the selected reference voltage and the analog input range. At a 100 mV reference, the converter can provide an input-referred resolution of 49 µV; at a 2.5 V reference, the corresponding resolution is 1.22 mV. These values make reference selection a central system-design decision because increasing the reference range can improve resolution while requiring more analog headroom and careful frontend scaling. Typical applications include direct transducer interfacing, battery-operated measurement instruments, remote data-acquisition nodes, and multichannel analog monitoring systems. In each case, the ADC can sample a differential sensor output and produce digital data for a microcontroller, embedded processor, or communications interface. Differential input also helps the design reject noise that is common to both signal wires when the external analog circuitry is arranged appropriately. Layout should prioritize a short, symmetrical route between the input source, reference circuit, and converter pins. Decoupling capacitors should be placed close to their associated supply and reference pins, while analog and digital return currents should be managed to prevent converter activity from coupling into the input signal. The 8-pin mini-DIP package supports straightforward through-hole prototyping and replacement without requiring a fine-pitch surface-mount assembly. This product page combines the manufacturer specifications with package information, application guidance, verified alternatives, and engineering-oriented design notes. It is intended to help engineers evaluate resolution, conversion speed, reference range, input architecture, and board-level implementation before integrating the ADS7817P into a data-acquisition design.

RFQ پەیوەندی
ADS7817PB - 12-Bit 200 kSPS Differential ADC | Texas Instruments
ADS7817PB

ADS7817PB - 12-Bit 200 kSPS Differential ADC | Texas Instruments

The Texas Instruments ADS7817PB is a 12-bit, 200 kSPS sampling analog-to-digital converter with a fully differential input and a selectable reference voltage from 100 mV to 2.5 V. Its input-referred resolution ranges from 49 µV to 1.22 mV, and the device is housed in an 8-pin plastic mini-DIP package. The converter combines low power, differential input, and automatic power-down operation for compact measurement systems. An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code. A differential ADC measures the voltage difference between two input nodes rather than the voltage relative to ground. This topology can reject common-mode disturbances when the source is balanced, improving measurement integrity in systems containing switching converters, motor-control circuitry, or long sensor connections. The ADS7817PB belongs to the ADC → data-converter IC → semiconductor hierarchy. The 12-bit conversion resolution provides 4,096 digital codes, while the 200 kSPS sampling rate supports rapidly changing sensor signals. Its adjustable reference spans 100 mV to 2.5 V, allowing the analog front end to set the conversion range. The manufacturer identifies the differential input, low-power operation, automatic power-down, and compact package as principal benefits for transducer interfaces, battery-operated systems, remote acquisition, and multiplexed measurement systems. The sampling architecture captures the analog input through an internal sample-and-hold stage before conversion. Differential operation supports the connection of bridge sensors and other sources whose useful output appears across two terminals. The 8-pin package limits board area, while serial data output reduces the number of interconnections required for a low-channel-count acquisition design. A 5 V supply and a -40 °C to +85 °C operating range suit industrial equipment. Typical uses include pressure and temperature transducer channels, battery-powered instrumentation, remote sensor nodes, and multi-channel measurement boards. In each case, the 200 kSPS rate provides margin for sampling while the differential architecture helps preserve signal quality. The low-power and automatic power-down characteristics are especially useful when acquisition duty cycle is intermittent. Designers should treat the full-scale input range, reference accuracy, common-mode limits, source impedance, and conversion timing as a coordinated set. Decoupling capacitors should be placed directly at the supply and reference pins, while the analog input path should remain short and symmetric to minimize offset and noise pickup. Review the manufacturer pin-description and application information before assigning PCB signals or selecting input filtering values. This product page combines the manufacturer specifications with application guidance, package information, engineering design notes, and a structured view of drop-in replacement options. It is intended to help engineers evaluate signal-chain compatibility, thermal conditions, layout risk, and sourcing requirements before committing the ADS7817PB to a new analog measurement design.

RFQ پەیوەندی
ADS7817U - 12-Bit 200kHz Differential ADC | Texas Instruments
ADS7817U

ADS7817U - 12-Bit 200kHz Differential ADC | Texas Instruments

Texas Instruments ADS7817U is a 12-bit, 200 kHz sampling analog-to-digital converter with a high-impedance fully differential analog input. It accepts a reference voltage from 100 mV to 2.5 V, providing a corresponding input-referred resolution of 49 uV to 1.22 mV. The device is supplied in an 8-SOIC package for compact, surface-mount analog measurement designs. An ADC is an analog-to-digital converter, a data-acquisition IC that samples an analog voltage and converts it into a numeric code for processing or transmission. The ADS7817U belongs to the SAR ADC family, where successive-approximation conversion provides accurate measurement at relatively low power consumption. Its differential input structure supports measurement of the voltage difference between two analog nodes rather than measuring a single node relative to ground. Key features of the ADS7817U include 12-bit resolution, a 200 kHz sampling rate, a fully differential input, and automatic power-down. The reference range of 100 mV to 2.5 V allows the converter to be matched to low-amplitude sensor signals. The manufacturer describes the device as micropower and identifies differential input, low power, automatic power-down, and small size as central advantages for direct sensor-interface applications. The conversion performance is also supported by a serial interface suitable for embedded measurement systems. The serial output can be connected to a microcontroller or other digital controller for conversion and data processing. The differential input architecture is particularly useful when the source has a small signal amplitude and common-mode voltage varies, because the useful measurement is the difference between the two input nodes. Typical applications include industrial process measurement, battery and power-system monitoring, sensor signal acquisition, portable instrumentation, and low-power embedded control. The ADS7817U is appropriate when the design requires a compact, low-power SAR converter with a differential input and a selectable reference range. When laying out the circuit, use short, symmetrical analog traces and place the input and reference components close to the converter. Confirm the supply, reference, analog input, digital interface, and ground connections against the manufacturer datasheet before fabrication. Treat the differential input and reference network as precision signal paths rather than general-purpose routing.

RFQ پەیوەندی
ADS7817U/2K5G4 - 12-Bit 200kHz Differential Input MicroPower ADC | TI
ADS7817U/2K5G4

ADS7817U/2K5G4 - 12-Bit 200kHz Differential Input MicroPower ADC | TI

The Texas Instruments ADS7817U/2K5G4 is a 12-bit, 200 kHz sampling successive-approximation analog-to-digital converter (SAR ADC) with a true differential analog input, automatic power-down, and a high-impedance front end, supplied on a 2,500-piece tape-and-reel. The /U suffix identifies the 8-pin SOIC (D) package, while /2K5G4 denotes the 2.5 k reel quantity and RoHS-compliant Pb-free matte-tin lead finish. An SAR ADC is a successive-approximation-register analog-to-digital converter - a type of data converter that uses a binary search through an internal DAC to determine each digital code in N clock cycles. SAR ADCs sit under the broader hypernyms of data converter -> ADC -> precision converter -> integrated circuit, and are valued for their deterministic latency, single-shot accuracy, and zero-pipeline-delay behavior, which makes them the dominant architecture for multiplexed multi-channel data acquisition systems and motor-control feedback loops. The ADS7817 family is specified for bipolar differential input ranges and a fully-differential sample-and-hold front end, with a programmable reference from 100 mV to 2.5 V that scales the input-referred LSB size between 49 uV and 1.22 mV. Its micro-power operating current and sub-3 uA power-down current suit battery-instrumentation, transducer bridges, and portable sensor signal chains where energy budget dominates the BOM. The ADS7817 achieves 200 kHz throughput while consuming micro-power during conversion, then automatically powers down between conversions. Internal architecture includes a charge-redistribution capacitive DAC, a high-bandwidth differential input amplifier, and an SAR control core clocked from an external serial clock; the SPI-/QSPI-/MICROWIRE-compatible serial interface packs 12-bit results into a compact frame. Typical applications include battery-powered instrumentation, industrial process control loops, portable medical monitors, sensor-signal digitization for strain gauges and thermocouples, and general-purpose data acquisition front-ends. The differential input is particularly attractive where common-mode noise from motor inverters or long sensor cables would saturate a single-ended ADC. When designing with the ADS7817, place the reference decoupling capacitor close to the REF pin and keep the analog and digital grounds joined at a single point near the converter's GND pin to preserve differential-input linearity. Note that the /U SOIC-8 (D) and /E MSOP-8 packages share the same pinout but differ in thermal mass - choose /E only when board area is more critical than dissipation. This page synthesizes distributor stock, parametric drop-in equivalents in the SOIC-8 footprint, and design considerations that the manufacturer datasheet alone does not aggregate, helping engineers evaluate ADS7817U/2K5G4 for both new designs and legacy replacements.

RFQ پەیوەندی
ADS7817UB - 12-Bit 200kHz SAR ADC | Texas Instruments
ADS7817UB

ADS7817UB - 12-Bit 200kHz SAR ADC | Texas Instruments

The Texas Instruments ADS7817UB is a 12-bit successive-approximation-register analog-to-digital converter with a 200kHz sampling rate, fully differential high-impedance input, and an 8-pin SOIC package. Its reference voltage can vary from 100mV to 2.5V, producing corresponding input-referred resolution between 49uV and 1.22mV. The device also supports low-power automatic power-down, with a maximum power-down current of 3uA. An SAR ADC is a data-converter architecture that determines each digital output through a sequence of successive approximation decisions. It is generally simpler and lower power than flash, pipeline, or sigma-delta converters when moderate conversion speed and compact analog-to-digital conversion are required. The ADS7817 belongs to the precision ADC category and the broader semiconductor hierarchy of analog-to-digital converters, data-converter ICs, and signal-chain components. The ADS7817UB combines a 12-bit conversion resolution with a 200kHz maximum sampling rate, making it suitable for sensors, industrial measurement systems, control loops, and embedded data acquisition. Its fully differential input architecture supports a true differential analog signal path, while the selectable reference voltage allows the analog input range to be scaled with the system. The small SOIC-8 package also supports compact analog and embedded boards. The serial interface reduces the number of external signal connections required for transferring conversion results to a controller. Automatic power-down is useful in intermittent measurement systems because the ADC can reduce its supply consumption when conversions are not continuously required. The manufacturer describes the ADS7817 as a low-power precision ADC, with the reference and differential input arrangement helping match the converter to the signal source rather than requiring a single-ended input stage. Typical applications include industrial process monitoring, current and voltage sensing, battery and power-system instrumentation, laboratory data acquisition, and embedded sensor interfaces. The 200kHz sampling rate is adequate for many real-time control and measurement loops, while the 12-bit code width supports a practical balance between resolution, speed, power, and conversion cost. The primary design consideration is input range and reference selection. The ADC input must remain within the range established by the selected reference voltage, and the signal must satisfy the timing and settling requirements for the SAR conversion process. Differential input routing should be symmetric and kept away from noisy digital and switching nodes to preserve signal integrity. This page combines the ADS7817UB specifications, drop-in replacement candidates, comparison parameters, and application guidance to support component selection and board-level implementation.

RFQ پەیوەندی
ADS7817UBG4 - 12-Bit 200kHz Differential Input SAR ADC | Texas Instruments
ADS7817UBG4

ADS7817UBG4 - 12-Bit 200kHz Differential Input SAR ADC | Texas Instruments

The Texas Instruments ADS7817UBG4 is a 12-bit, 200 kHz successive-approximation register (SAR) analog-to-digital converter (ADC) with a true differential analog input and an 8-pin SOIC package. It operates from a single 5 V analog supply, accepts bipolar differential inputs of +/-2.5 V, and offers a software-controllable automatic power-down mode that drops quiescent current to under 1 mA between conversions. The reference voltage is externally programmable from 100 mV to 2.5 V, which translates to a per-LSB resolution between 49 uV and 1.22 mV. What is a SAR ADC and where does the ADS7817UBG4 fit in the signal chain? A SAR ADC is a successive-approximation-register analog-to-digital converter that uses a binary-search algorithm against a sample-and-hold input. It is a sub-type of Nyquist-rate ADC, sitting under the broader ADC family within data-converter ICs and, ultimately, signal-chain semiconductors. SAR ADCs are valued for deterministic latency, dc accuracy, low power, and ease of driving - making them the preferred choice for multiplexed data-acquisition, sensor readout, and instrumentation front ends. Key specifications of the ADS7817UBG4 include 12-bit resolution, 200 kSamples/s maximum throughput, true differential bipolar input range, an input-referred noise floor near 49 uV rms at the smallest reference setting, automatic power-down between conversions, and a synchronous serial (SPI/SSI-compatible) interface. The differential input rejects common-mode noise and ground-loop offsets that plague single-ended ADCs in industrial environments. Architecturally the device pairs a high-impedance differential input stage with a capacitive charge-distribution SAR core, an external reference, and a serial state machine that supports 24-bit transfer framing so a host microcontroller can clock out the conversion result and the channel ID with a single CS edge. Compared with integrating or sigma-delta converters of similar throughput, the ADS7817UBG4 delivers higher speed, true differential input, and lower power in a smaller footprint. Typical applications include portable and battery-powered instrumentation, multi-channel sensor data acquisition, weigh scales, panel meters, industrial process controls, and remote or isolated data loggers. Designers choose the ADS7817UBG4 when they need accurate differential measurement from bridge sensors or thermocouples without paying for a sigma-delta's oversampling latency. A design tip: place the external reference bypass capacitor (typically 10 uF ceramic in parallel with 0.1 uF) within 5 mm of the REF pin, and route the differential analog traces symmetrically. The automatic power-down feature can cut average supply current to under 200 uA in 1 kHz applications, but only if the host controller toggles CNVST at a controlled cadence. This page synthesizes distributor stock, authoritative TI datasheet parameters, drop-in alternatives from the same SAR family, and practical layout guidance - engineering context you will not find on a single distributor listing.

RFQ پەیوەندی
ADS7817UC - 12-Bit, 200kHz Differential SAR ADC | Texas Instruments
ADS7817UC

ADS7817UC - 12-Bit, 200kHz Differential SAR ADC | Texas Instruments

Texas Instruments ADS7817UC is a 12-bit, 200kHz sampling successive-approximation analog-to-digital converter with one fully differential analog input and an 8-pin SOIC package. It accepts an adjustable reference voltage from 100mV to 2.5V, corresponding to an input-referred resolution from 49uV to 1.22mV. Its low-power architecture, automatic power-down function, and small package make it suitable for compact precision-measurement systems. An ADC is an analog-to-digital converter, a semiconductor device that converts a continuously varying analog voltage into a numeric value for processing, measurement, or control. The ADS7817 belongs to the 12-bit SAR ADC family, where successive-approximation conversion repeatedly compares the sampled input with a reference voltage. The Texas Instruments ADS7817 family is designed for systems that require modest conversion resolution, differential analog input handling, and a compact interface. The converter provides 12-bit resolution and a maximum sampling rate of 200kHz. Its fully differential input accepts two complementary signal nodes, which is useful when the source has a differential output or when common-mode rejection is important. The reference range of 100mV to 2.5V allows the analog signal span to scale with the available precision reference. At the limits of that range, the corresponding input-referred resolutions are 49uV and 1.22mV. Low-power operation is a core feature of the ADS7817 family. Automatic power-down reduces consumption when conversion activity is not required, while the small 8-SOIC package simplifies compact analog and mixed-signal layouts. The ADS7817UC ordering code is associated with the 8-SOIC package, and the manufacturer product page lists the family in plastic mini-DIP-8, SO-8, and MSOP-8 options for design flexibility across package inventories. Typical uses include battery-powered instrumentation, industrial sensor interfaces, process-control measurement, low-level differential signal acquisition, and portable equipment requiring a compact converter. In a sensor circuit, the differential input can accept the sensor output when the source supports differential signaling. In a laboratory instrument, the adjustable reference lets the designer trade full-scale range against input-referred resolution while preserving the 12-bit output format. Design the input and reference networks to preserve the converter’s high-impedance differential input characteristics. Keep analog traces short, place bypass capacitors close to the supply and reference pins, and return unused analog and digital grounds carefully according to the manufacturer datasheet. Because input-referred resolution changes with the reference voltage, verify the signal span, common-mode range, and headroom together rather than treating the 12-bit resolution as a fixed voltage increment. This product guide combines the manufacturer specifications with package details, application guidance, design notes, and a verified drop-in assessment. It also distinguishes confirmed device characteristics from parameters that require confirmation from the datasheet, helping engineers plan the analog front end, footprint, conversion rate, and procurement requirements with greater precision.

RFQ پەیوەندی
ADS7817UG4 - 12-Bit 200kSPS Differential ADC | Texas Instruments
ADS7817UG4

ADS7817UG4 - 12-Bit 200kSPS Differential ADC | Texas Instruments

The Texas Instruments ADS7817UG4 is a 12-bit, 200 kSPS successive-approximation analog-to-digital converter (SAR ADC) with a high-impedance fully differential analog input, housed in an 8-pin SOIC (D) package. Key headline specifications include 12-bit resolution, 200 kSamples/s sampling rate, and a true differential bipolar input range of -2.5 V to +2.5 V, with the reference voltage independently adjustable from 100 mV to 2.5 V for input-referred resolutions between 49 uV and 1.22 mV. The G4 suffix denotes a Pb-free green assembly revision. A SAR ADC is a successive-approximation-register analog-to-digital converter: it uses an internal DAC, a comparator, and a SAR logic block to perform a binary search against the input voltage, producing a digital output word in one conversion cycle. SAR ADCs sit in the broader hierarchy of analog-to-digital converters -> data converters -> mixed-signal ICs, offering an attractive middle ground between slow but precise delta-sigma ADCs and fast but power-hungry flash ADCs. The ADS7817UG4 specifically targets low-power, high-impedance, differential applications such as sensor signal chains and instrumentation front ends. Differentiating features of the ADS7817UG4 include true differential input (rejecting common-mode noise in industrial environments), an automatic power-down mode that drops supply current between conversions, a serial (SPI/QSPI/MICROWIRE-compatible) interface, and 4.75 V to 5.25 V single-supply operation. Power dissipation is approximately 1.8 mW at 200 kSPS and falls to microwatt levels during power-down, making the part well suited to battery-powered or energy-harvesting data acquisition systems. Architecturally, the device uses a charge-redistribution switched-capacitor DAC with a sample-and-hold front end, allowing direct connection to high-impedance sources without external buffering. The internal conversion clock is generated on-chip, so the only external clock needed is the serial interface clock. The differential input structure inherently rejects common-mode noise and is particularly useful when digitizing bridge sensors, thermocouples, or shunt currents in noisy industrial environments. Typical applications include portable instrumentation, industrial process control loops, weigh scales, thermocouple and RTD front ends, battery monitoring systems, and isolated data acquisition modules. The wide input range and adjustable reference also make it a strong fit for transducer signal conditioning where dynamic range must be matched to the sensor output. When designing with this ADC, pay attention to the reference bypass network and analog input common-mode voltage; place a 10 uF tantalum and 0.1 uF ceramic on REF and follow the recommended layout in the datasheet typical-application schematic. Use the CS/FSYNC pin for framing conversions and avoid driving AINP and AINN outside the input common-mode range, which can introduce distortion. This page synthesizes distributor pricing, drop-in alternatives in the SOIC-8 footprint, and practical design notes that complement (but do not replace) the manufacturer datasheet.

RFQ پەیوەندی
ADS7818P - 12-Bit 500 kSPS SAR ADC | Texas Instruments
ADS7818P

ADS7818P - 12-Bit 500 kSPS SAR ADC | Texas Instruments

The Texas Instruments ADS7818P is a 12-bit successive-approximation sampling analog-to-digital converter with one unipolar input, a 500 kSPS throughput rate, an internal 2.5 V reference, and a synchronous serial interface. It is housed in an 8-pin PDIP package and supports an input range from 0 V to 5 V, corresponding to zero to twice the internal reference voltage. The converter combines an integrated sample-and-hold circuit with typical power dissipation of 11 mW at 500 kSPS. A power-down mode reduces typical dissipation to 2.5 mW, making the device suitable for portable instrumentation and battery-powered measurement systems. A sampling ADC is a type of analog-to-digital converter that acquires an input voltage, holds that voltage during conversion, and converts it into a digital code. The ADS7818P belongs to the successive-approximation, or SAR, ADC family, which uses a comparator and internal DAC to determine each output bit through a sequence of binary trials. SAR converters are widely used when moderate resolution, predictable conversion timing, low power consumption, and compact serial-interface implementation are more important than maximum conversion speed. The main features of the ADS7818P are its 12-bit resolution, 500 kSPS sampling throughput, internal 2.5 V reference, and low-power operation. The 0 V to 5 V input range allows the converter to use the internal reference directly without an external reference circuit. The synchronous serial interface supports straightforward connection to microcontrollers, DSPs, and other digital controllers while reducing the number of external pins. The 11 mW typical operating dissipation supports efficient data-acquisition designs, while the 2.5 mW power-down specification helps reduce consumption when measurements are intermittent. The ADS7818P is suitable for industrial process monitoring, sensor instrumentation, portable data loggers, and embedded measurement systems. Its internal reference improves portability by reducing external component count and avoiding reference-routing errors. The 500 kSPS throughput is adequate for many pressure, temperature, position, and level sensing systems that require regular updates rather than high-frequency waveform capture. The 8-pin PDIP package also simplifies prototyping and through-hole assembly. When designing the analog input path, keep the source impedance and settling time compatible with the ADC acquisition interval. Place the input and reference bypass capacitors close to their associated pins, keep the analog trace short, and route the synchronous clock and data lines away from sensitive input wiring. Use the power-down control when the measurement system operates intermittently, and account for the reference accuracy when establishing the overall measurement uncertainty. This page provides a structured technical overview of the ADS7818P, including its operating characteristics, practical application guidance, packaging information, and design considerations. It also distinguishes the device from related ADS7818 package and ordering variants so engineers can identify the correct part for a new PCB or an existing design.

RFQ پەیوەندی
ADS7819P - 12-Bit 800 kSPS Single-Input ADC | Texas Instruments
ADS7819P

ADS7819P - 12-Bit 800 kSPS Single-Input ADC | Texas Instruments

The Texas Instruments ADS7819P is a 12-bit, single-input analog-to-digital converter capable of 800 kSPS sampling and supplied in a 28-pin PDIP package. It belongs to the sampling ADC family, combining successive-approximation-register conversion with a parallel digital output interface. The device is intended for applications that require accurate digitization of rapidly changing analog signals while retaining a through-hole package for prototyping, legacy boards, and manually assembled industrial electronics. An ADC is a data-conversion IC that transforms a continuously varying analog voltage into a numeric code suitable for processing by a microcontroller, DSP, FPGA, or other digital controller. In the broader electronics hierarchy, the ADS7819P is an analog-to-digital converter, a data converter, an analog and mixed-signal IC, and a semiconductor. The 12-bit resolution provides 4,096 discrete codes for a full-scale conversion range, while the 800 kSPS rating defines the device as a high-speed sampling converter suitable for waveform capture, industrial monitoring, instrumentation, and embedded control. The defining product features are its 12-bit conversion resolution, one analog input, 800 kSPS conversion rate, parallel data interface, and 28-pin PDIP package. These characteristics distinguish it from slower general-purpose ADCs and from multiplexed converters designed to scan several channels. Because the device exposes one input, designers needing multiple analog sources may need an external analog multiplexer or must accept additional switching and acquisition-time considerations. Technically, the ADS7819P uses a sampling architecture to acquire the input voltage and then converts it through a successive-approximation process. A sample-and-hold front end captures the selected input before conversion, while the digital output presents the measured code for the next device or control system to latch. The 800 kSPS capability makes sustained waveform acquisition practical, although the complete signal chain still depends on the source impedance, analog front end, reference voltage, acquisition timing, and digital data handling. Designers should treat converter performance as a system property rather than relying on nominal resolution alone. Typical uses include industrial process monitoring, laboratory and test instrumentation, waveform digitization, digital control loops, embedded measurement systems, and replacement of legacy PDIP ADC designs. The parallel interface can simplify connections to older parallel buses and programmable logic, although it consumes more board space and signal lines than a serial ADC. The PDIP package is also easier to inspect, probe, and replace in prototypes than a fine-pitch surface-mount package. For a new PCB, verify the acquisition network, reference arrangement, logic levels, timing, and thermal conditions against the manufacturer datasheet. Keep the analog input path short, provide suitable decoupling at the supply and reference pins, and account for logic levels when driving the parallel output. For an existing board, confirm that the replacement footprint, pin orientation, converter timing, and output coding match the original design before substitution. This page organizes the available ADS7819P technical facts with engineering-focused application guidance, selection criteria, and verified source links. It focuses on the practical decisions that determine whether this 12-bit, 800 kSPS, single-channel PDIP ADC belongs on a new design or serves as a sensible replacement for an older board.

RFQ پەیوەندی