ADC/DAC
بەرهەمەکان (3,600+)
ADS7819U - 12-Bit 800 kSPS SAR ADC | Texas Instruments
The Texas Instruments ADS7819U is a 12-bit, 800 kSPS sampling successive-approximation analog-to-digital converter with a parallel microprocessor interface, housed in a 28-pin SOIC package. It uses a ±2.5 V standard analog input range and includes an internal reference, clock, sample-and-hold circuitry, and three-state output drivers. The converter has a 1.25 µs throughput time, making it suitable for high-speed signal acquisition and industrial control systems. An ADC is a semiconductor that converts an analog voltage into a digital code for processing, measurement, or control. The ADS7819U belongs to the successive-approximation ADC, data-converter, and analog-to-digital converter hierarchy. Its parallel output can connect directly to suitable microprocessor or digital logic circuitry, while the internal sample-and-hold function supports acquisition of rapidly changing input signals. Key features include 12-bit resolution, an 800 kSPS sampling rate, a ±2.5 V input range, and a 1.25 µs throughput time. The device also provides an internal reference and parallel data outputs with latches. The industrial temperature grade supports operation from -40 °C to +85 °C. These characteristics balance conversion speed, digital interface simplicity, and analog measurement capability for embedded acquisition systems. The converter uses a capacitor-based SAR conversion structure with an inherent sample-and-hold input stage. A complete conversion sequence requires the converter to compare the sampled input against an internal successive-approximation DAC and test successive bit weights. The resulting 12-bit code is presented through parallel outputs, and three-state drivers allow the output bus to be disabled when shared by multiple converters or interface resources. Typical applications include industrial process control, instrumentation, waveform capture, data acquisition systems, and microprocessor-controlled measurement equipment. In these systems, the ADS7819U can sample an analog sensor or conditioned signal and provide a 12-bit digital representation to a controller. Designers should account for the analog input range, source impedance, acquisition timing, reference behavior, and digital signal timing when completing the surrounding circuitry. For layout, place input, reference, and decoupling connections close to the device and follow the pin-description table in the manufacturer datasheet when assigning PCB tracks. The parallel interface requires careful routing to avoid timing skew, especially when converter outputs feed a higher-speed processor or shared bus. The 28-pin SOIC outline also allows assembly methods commonly used for industrial and instrumentation equipment. This page combines the ADS7819U specifications, packaging information, comparison considerations, and practical implementation guidance for engineers evaluating high-speed parallel-interface ADCs.
ADS7819UB - 12-Bit 800 kSPS SAR ADC | Texas Instruments
Texas Instruments ADS7819UB is a 12-bit, single-channel successive-approximation-register analog-to-digital converter with an 800 kSPS sampling rate, parallel output interface, and 28-pin SOIC package. It converts one analog input into 4096 digital codes and is designed for systems requiring moderate resolution and high sampling speed. An ADC is a data-conversion IC that transforms a continuously varying voltage into a digital value. The SAR ADC category belongs to the broader data-converter hierarchy, where the ADS7819UB combines a sampled analog input, an internal successive-approximation conversion process, and a parallel digital output. Its 800 kSPS rate allows the input to be refreshed rapidly enough for industrial monitoring, control, instrumentation, and signal-acquisition systems. The verified device characteristics include 12-bit resolution, one analog input channel, an 800 kSPS conversion rate, SAR architecture, parallel data output, and a 28-pin SOIC package. The 28-pin interface provides dedicated digital output lines alongside power, analog input, reference, and control connections. The industrial temperature-grade identification also supports use in commercial and industrial equipment, although individual electrical limits and test conditions should be checked in the manufacturer datasheet before final design release. SAR conversion is appropriate where repeatable sampling and a clear conversion-completion indication are more important than the very high throughput or simultaneous-sampling architecture of a dedicated high-speed ADC. Because the ADS7819UB exposes a parallel interface, downstream logic can capture the 12-bit result efficiently when the required output width is available. The primary design constraints are input range, reference accuracy, acquisition timing, output timing, and ensuring that the source impedance is compatible with the sampling network. Typical applications include industrial process monitoring, instrumentation, digital voltmeter or panel-meter signal chains, laboratory data acquisition, and embedded control systems. In each case, the 800 kSPS conversion capability provides useful temporal resolution, while the 12-bit code width supports measurements that do not require higher-resolution sigma-delta or pipeline converters. The parallel interface can connect directly to suitable FPGA or digital processing logic when pin count and board area are acceptable. A key implementation consideration is source impedance. The analog input must be able to charge the internal sampling capacitor within the acquisition interval defined by the datasheet; placing an input buffer close to the ADC can reduce settling error. Designers should also decouple the supply and reference pins, preserve the specified analog and digital grounding strategy, and use the conversion-start and end-of-conversion signals for reliable result capture. This page organizes the available device information, practical application guidance, same-package alternatives, and engineering-oriented comparisons. It focuses on helping designers decide whether the ADS7819UB's combination of 12-bit resolution, 800 kSPS sampling, SAR conversion, parallel output, and 28-pin SOIC packaging is appropriate for a new acquisition or control design.
ADS7820P - 12-Bit, 100 kHz ADC | Texas Instruments
The Texas Instruments ADS7820P is a 12-bit, successive-approximation analog-to-digital converter with a minimum sampling rate of 100 kSPS, a single +5 V supply, and a 28-pin through-hole DIP package. It accepts an analog input range up to +5 V and includes a sample-and-hold circuit, internal or external reference options, and serial interface control. According to the manufacturer datasheet, the converter can achieve 72 dB minimum SINAD with a 45 kHz input and limits integral nonlinearity and differential nonlinearity to ±1/2 LSB maximum. An ADC is a data-converter IC that transforms a continuous analog voltage into a digital numerical value for processing by a microcontroller, DSP, industrial controller, or measurement instrument. The ADS7820P belongs to the successive-approximation ADC hierarchy, which combines a sampling front end with an internal converter and digital interface. Its 12-bit resolution provides 4096 discrete codes across the selected analog input range, making it suitable for control, monitoring, and instrumentation systems that require accurate but modest conversion resolution. Key features include 12-bit resolution, a 100 kSPS minimum sampling rate, a +5 V analog input capability, 72 dB minimum SINAD, and ±1/2 LSB maximum INL and DNL. The converter also supports internal or external reference selection and operates from a single +5 V supply. These characteristics make it appropriate for digitizing slower control signals without the complexity and energy cost associated with higher-speed or higher-resolution converter families. The ADS7820P uses a successive-approximation conversion architecture and includes an integrated sample-and-hold function. A 10 microsecond conversion time supports the specified 100 kSPS minimum sampling rate, although the complete acquisition system must also account for signal settling, reference startup, digital-interface timing, and the source impedance presented to the analog input. A fixed reference or a precision external reference determines conversion accuracy, scale, and offset behavior, so reference implementation and layout are as important as the converter itself. Typical applications include industrial process monitoring, temperature and pressure sensor acquisition, potentiometer position measurement, battery-cell voltage monitoring, and embedded control systems. The 28-pin DIP package is particularly useful for prototypes, laboratory instruments, and through-hole industrial assemblies where rework access and socketed construction are preferable to a fine-pitch surface-mount footprint. For reliable circuit design, place the converter close to the analog source and use short, guarded input routes. The analog and digital return currents should meet at the device ground reference without carrying digital return current beneath the input network. Allow the reference to settle before conversion and calculate acquisition time from the source impedance, input capacitance, and required conversion accuracy. This page organizes the key electrical characteristics, package information, application guidance, and confirmed pin-compatible family options into a design-oriented resource. It also identifies where a manufacturer datasheet is required for exact timing, reference, and pin-description decisions.
ADS7820PB - 12-Bit 100 kSPS Parallel SAR ADC | Texas Instruments
The Texas Instruments ADS7820PB is a 12-bit successive-approximation analog-to-digital converter with a 100 kSPS minimum sampling rate, parallel word access, and a single-channel CMOS architecture in a 28-pin PDIP package. It accepts an analog input range from 0 V to +5 V and operates from a single +5 V supply, with internal or external reference options for flexible system design. An ADC converts a continuous analog voltage into a numeric code for processing, measurement, or control. Within the broader converter hierarchy, the ADS7820PB is a successive-approximation register ADC: an internal sample-and-hold circuit acquires the input, and successive comparison cycles resolve 12 bits. Its parallel output interface places the converted word directly on digital bus pins, which can shorten the path between conversion and a digital bus or microcontroller read cycle compared with serial-output converters. Key performance characteristics include a 10 us conversion time, 72 dB minimum SINAD with a 45 kHz input, and maximum integral and differential nonlinearity of ±1/2 LSB. The 0 V to +5 V input range directly supports systems operating from a +5 V supply. Internal or external reference selection allows the converter to use its own reference or a precision external voltage when calibration, reference stability, or analog scaling requirements justify an external network. The CMOS implementation and single-channel architecture suit industrial instrumentation, process measurement, sensor conditioning, laboratory equipment, and embedded data-acquisition systems where deterministic conversion timing and parallel data capture are valuable. The 28-pin PDIP package also simplifies through-hole prototyping and instrument-panel or legacy industrial board construction. Design care is required around the analog input path. Keep the sampling network close to the analog pins, provide a low-noise reference, and observe the manufacturer layout guidance for grounding and bypassing. The parallel output bus must also be properly terminated or buffered when connected to a processor with a slower or incompatible input impedance. This page consolidates the device specifications, pin-compatible alternatives, application guidance, and practical design notes into one engineering reference. It highlights where the ADS7820PB fits well and where newer converter families may offer higher throughput, lower power, or serial-interface flexibility.
ADS7820U - 12-Bit 100 kSPS ADC | Texas Instruments
The Texas Instruments ADS7820U is a 12-bit, 10 µs sampling CMOS analog-to-digital converter designed for single +5 V operation and input signals up to +5 V. It supports a minimum sampling rate of 100 kSPS, provides 72 dB minimum SINAD with a 45 kHz input, and limits integral and differential nonlinearity to ±1/2 LSB. The device is packaged in a 28-pin SOIC and uses a successive-approximation conversion architecture with an internal sample-and-hold circuit. An ADC is a mixed-signal IC that converts an analog voltage into a numeric code for processing by a microcontroller, DSP, or programmable logic. A 12-bit ADC offers 4096 discrete output codes, which is appropriate for process monitoring, sensor conditioning, instrumentation, and industrial control signals that do not require higher resolution. The ADS7820U combines sampling, quantization, an internal reference option, and digital output circuitry in one package. Important device features include a 100 kSPS minimum conversion rate, ±1/2 LSB maximum INL and DNL, single +5 V supply operation, internal or external reference selection, and a complete sample-and-hold input stage. The 12-bit resolution and 10 µs conversion time support measurement loops in which several channels can be scanned quickly. The manufacturer also identifies the ADS7820 family as pin-compatible with the ADS7821, allowing a design to be evaluated against a related family member before layout release. The converter uses successive approximation to determine each 12-bit result. Its analog input is sampled during acquisition, and the conversion architecture compares the sampled voltage against an internal or external reference through a successive-approximation internal DAC. Because the input stage includes its own sample-and-hold circuit, the analog signal is captured during the acquisition interval rather than requiring a separate external sample-and-hold amplifier in standard single-ended operation. Typical uses include industrial process control, temperature and pressure transducer interfaces, battery and power-system monitoring, laboratory measurement equipment, and embedded data acquisition. The 100 kSPS rate is well matched to slow sensor signals that change gradually, while the 72 dB SINAD specification supports higher-resolution measurement than a typical low-cost 8-bit or 10-bit converter. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, especially for the analog input, reference, supply, and digital interface pins. Place the supply bypass capacitor close to the device and route the analog input away from noisy digital signals. Confirm the selected internal or external reference against the required accuracy before calibration, because reference error contributes directly to the total conversion error.
ADS7822P - 12-Bit 200kSPS MicroPower ADC | Texas Instruments
Texas Instruments ADS7822P is a 12-bit sampling analog-to-digital converter with a 200 kSPS maximum sampling rate, one analog input, and a 2.7 V to 5.25 V supply range. The device uses successive-approximation conversion and is offered in an 8-pin PDIP through-hole package for industrial-grade applications. A sampling ADC is an analog-to-digital converter that captures a discrete sample of an input voltage and converts it into a digital code. ADS7822P belongs to the successive-approximation ADC, or SAR ADC, family within the broader ADC, data-converter, and semiconductor hierarchies. Its compact 8-pin package and low operating power make it useful where analog measurement must be added to a control, monitoring, or embedded system without introducing a high-speed, high-power converter. The 12-bit resolution provides 4096 discrete code levels for the converter’s full input range. A 200 kSPS sampling capability supports fast-changing analog signals and periodic acquisition in industrial monitoring, sensor measurement, and embedded control. Operation from 2.7 V to 5.25 V permits use with both common low-voltage supply systems and 5 V analog circuits. The manufacturer describes the ADS7822 family as requiring very little power even while operating at the full 200 kHz rate. The ADS7822P uses a sampling architecture and a serial interface for transferring converted results to a digital controller. Sampling, conversion, and serial communication can be coordinated to balance acquisition speed against system timing requirements. Because the exact conversion time, input impedance, reference arrangement, and interface timing are not stated in the available product summaries, designers should use the pin-description table, timing diagrams, and recommended operating conditions in the manufacturer datasheet when defining clocks, sampling intervals, and acquisition circuitry. Typical applications include industrial sensor interfaces, process-control measurements, portable instrumentation, data acquisition modules, and embedded control systems. The 200 kSPS rate is suitable for continuous monitoring of slowly varying process signals as well as periodic capture of faster waveforms. The 2.7 V to 5.25 V operating range also simplifies designs that must operate across 3.3 V and 5 V system rails. The principal design consideration is ensuring that the analog input, supply, grounding, and digital interface are connected exactly as specified. Keep the analog signal path compact, place input filtering and bypass capacitance close to the device pins, and route serial signals away from sensitive analog traces. Confirm acquisition timing and reference configuration against the manufacturer datasheet before fixing the system sampling rate. This page combines the verified device identity, electrical limits, package information, replacement analysis, and practical integration guidance. It also identifies the important boundary between confirmed drop-in interchangeability and devices that may perform a similar function but do not establish pin-to-pin compatibility, helping engineers compare alternatives without overlooking footprint, interface, or acquisition-timing differences.
ADS7822PBG4 - 12-Bit 200kSPS Micro-Power SAR ADC | Texas Instruments
The Texas Instruments ADS7822PBG4 is a 12-bit, 200 kSPS successive-approximation-register (SAR) analog-to-digital converter housed in an 8-pin PDIP (PB) through-hole package, with a 2.7V to 5.25V single-supply operating range. The part is specified over the industrial -40C to +85C temperature range and draws only microwatts of power even at the full 200 kHz conversion rate, making it well suited for battery-powered and always-on data-acquisition front ends. What is a SAR ADC? A successive-approximation-register analog-to-digital converter is a precision data converter that resolves an input voltage using a binary-search algorithm against an internal capacitive DAC. Compared with flash ADCs (fast but power-hungry) and delta-sigma ADCs (high resolution but low bandwidth), SAR ADCs offer a balance of moderate speed (up to a few MSPS), low latency (single-cycle conversion), and 8 to 18 bits of resolution, which is why they dominate multiplexed industrial, instrumentation, and process-control signal chains. Key features of the ADS7822PBG4 include a single-ended analog input, an external reference (VREF) pin, a synchronous serial (SPI/QSPI/Microwire) interface, and an SCLK clock input. The PBG4 suffix denotes the Pb-free (RoHS-compliant) green version of the standard 8-PDIP. Designers can sample at full throughput while consuming roughly 1.5 mW at 3V, and power scales linearly with throughput, dropping to microwatts in shutdown. Architecturally, the ADS7822 uses a charge-redistribution CDAC and an inherent sample-and-hold on the input, eliminating the need for an external buffer in many cases. The serial interface is straightforward: CS, SCLK, and DOUT, with the MSB clocked out on the first falling edge. The reference input is ratiometric to VDD, which simplifies system design when ratiometric transducers such as bridge sensors are used. Typical applications include portable instrumentation, pen-tablet digitizers, isolated 4-20 mA loop digitizers, multi-channel multiplexed data-acquisition cards, and battery monitoring in handheld medical or industrial sensors. Its small 8-PDIP footprint and low power also make it attractive for retrofits of legacy through-hole designs. Design considerations: keep the analog input traces short and guarded, bypass VREF with a low-ESR 10 uF (tantalum) plus 0.1 uF ceramic combination, and hold CS low for the full conversion to avoid digital feedthrough. The ADS7822PBG4 requires an external clock; verify SCLK is clean and the controller's SPI mode matches the datasheet timing diagram. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design guidance that is not available on the manufacturer datasheet alone.
ADS7822PC - 12-Bit 200kSPS SAR ADC | Texas Instruments
The Texas Instruments ADS7822PC is a 12-bit, single-input, successive-approximation-register sampling analog-to-digital converter operating from a 2.7V to 5.25V supply and supporting conversion rates up to 200kSPS. It is packaged in an 8-pin plastic dual inline package (8-PDIP). The converter combines a compact pin count with low power consumption, including operation at the full 200kSPS conversion rate. A sampling ADC is a data-converter category that acquires an analog voltage, samples it onto an internal node, and converts the held voltage into a digital code. A successive-approximation-register ADC, commonly abbreviated SAR ADC, determines the digital result one bit at a time during each conversion. Within the broader semiconductor hierarchy, the ADS7822PC is an analog-to-digital converter, interface IC, and power-sensitive data-acquisition component. The primary functional characteristics are 12-bit resolution, one analog input, SAR conversion, a maximum sampling rate of 200kSPS, and a 2.7V to 5.25V operating supply range. These characteristics make the device suitable for industrial measurement, control, instrumentation, and embedded systems that need moderate-resolution conversion without the power demand of a high-speed data converter. The single analog input also simplifies PCB routing compared with a multiplexed multi-channel converter. The 8-PDIP package provides a straightforward through-hole implementation for prototypes, legacy control systems, test equipment, and designs assembled by manual insertion. Its pin count keeps the interface compact, while the parallel digital interface provides a direct connection to suitable microcontrollers, programmable logic, or digital interface hardware. Designers should account for the ADC's reference, supply, analog-ground, digital-ground, and digital-output requirements when assigning PCB tracks. Typical uses include digitizing a conditioned sensor signal in an industrial controller, sampling a potentiometer or divider in an embedded instrument, monitoring a low-frequency analog process variable, and capturing control feedback in laboratory equipment. The 200kSPS rate gives designers temporal margin for multiplexed analog conditioning and digital filtering, although system timing must remain compatible with the converter's serial or parallel control signals and acquisition sequence. The primary design consideration is that the analog input must remain within the converter's valid input range and that the supply and reference circuitry must be kept stable. Use careful grounding and short analog traces so switching activity on digital outputs does not disturb the sampled voltage. Confirm acquisition timing, output coding, and operating limits against the manufacturer datasheet before fixing the PCB layout. This page combines the confirmed converter specifications, package information, application guidance, selection trade-offs, and verified source links into a practical engineering reference for the ADS7822PC. It also distinguishes confirmed characteristics from parameters that require confirmation from the manufacturer datasheet.
ADS7822PG4 - 12-Bit 200kSPS Micropower ADC | Texas Instruments
The Texas Instruments ADS7822PG4 is a 12-bit, 200 kSPS micropower sampling analog-to-digital converter (ADC) with ensured specifications across a 2.7 V to 5.25 V supply range, housed in an 8-pin PDIP (P) package. It features a successive-approximation-register (SAR) architecture, one single-ended input channel, and very low power dissipation that allows full 200 kHz throughput even in power-constrained designs. An SAR ADC is a type of analog-to-digital converter that uses a binary-search algorithm against a precision DAC and comparator to resolve each input sample in N clock cycles. SAR ADCs are prized for their deterministic latency (no pipeline delay), excellent DC accuracy, and inherently low noise floor at moderate sample rates. The ADS7822 sits within the broader taxonomy of data converters -> ADCs -> SAR ADCs -> precision/low-power SAR ADCs, serving applications that demand a clean, accurate single-shot conversion without the overhead of a complex digital interface. Key features include 12-bit resolution with no missing codes, a single 2.7 V to 5.25 V analog supply, a synchronous serial (SPI/QSPI/MICROWIRE-compatible) digital interface, an analog input range of 0 V to VREF (or 0 V to VDD with internal reference), and an internal 2.5 V reference option. Power consumption is typically 1.6 mW at 200 kSPS with a 5 V supply, and the part automatically powers down between conversions for energy-efficient duty-cycled operation. Architecturally, the converter combines a capacitive-charge-distribution DAC, a high-bandwidth comparator, a SAR, and an on-chip reference. The internal clock does not require an external oscillator, simplifying PCB routing. The 8-pin PDIP package is pin-compatible with legacy through-hole designs and is also available in SOIC-8 and MSOP-8 versions of the same silicon, allowing easy migration between through-hole and surface-mount assemblies without re-layout. Typical applications include portable instrumentation, battery-powered data loggers, isolated sensor front ends, pen-digitizers and touch-screen controllers, point-of-sale terminals, and general-purpose analog signal conditioning in microcontroller-based systems. The wide supply range and micropower operation make it a strong fit for any 3.3 V or 5 V mixed-signal design. When designing with this device, ensure the analog input source drives a low-impedance buffer to avoid ADC drive-induced gain errors, and decouple AVDD with a 10 µF tantalum plus 0.1 µF ceramic combination placed within 5 mm of the supply pin. The serial interface is straightforward but requires precise SCLK timing - review TI's timing diagrams before connecting it to a microcontroller. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes that complement the manufacturer datasheet, helping engineers select and qualify the ADS7822PG4 quickly.
ADS7822U - 12-Bit 200kSPS Micro-Power ADC | TI
Texas Instruments ADS7822U is a 12-bit, 200kSPS sampling analog-to-digital converter with a 2.7V to 5.25V supply range, one analog input, and an 8-pin SOIC package. Its micro-power design supports low-consumption instrumentation while providing the throughput required for precision sensor, control, and measurement applications. A sampling ADC is a data-converter category that acquires an analog voltage through successive approximation and converts it into a digital value. In the product hierarchy, the ADS7822U is a sampling ADC, which is a type of ADC and a semiconductor interface device used to bridge physical analog signals and digital processing systems. The principal specifications are 12-bit conversion resolution, a maximum sampling rate of 200kSPS, and operation from 2.7V to 5.25V. The converter also features a low-power shutdown state with a maximum power-down current of 3µA. These characteristics make the device suitable for portable measurement systems, industrial controls, and embedded equipment that must balance conversion speed, resolution, and energy use. The ADS7822 uses a serial interface to exchange conversion commands and digital results with a host microcontroller or processor. Its single-input architecture keeps the interface and board requirements compact. Because it is a sampling converter rather than a continuous-time converter, acquisition timing, source settling, reference stability, and digital-interface timing remain important parts of achieving accurate results at high conversion rates. Typical applications include industrial pressure and temperature monitoring, laboratory sensor acquisition, programmable test equipment, and low-power embedded data logging. The 8-pin SOIC package is straightforward to assemble on conventional through-hole-style PCB land patterns and is smaller than many higher-channel-count mixed-signal systems. The 200kSPS rate provides practical margin for monitoring signals that do not require continuous waveform capture. Designers should verify the analog input range against the selected reference voltage, allow the source and front end to settle before conversion, and place bypass capacitors close to the supply pins. A clean reference and appropriately shielded analog layout are equally important because they directly influence the stability and repeatability of the 12-bit conversion result. This page consolidates verified manufacturer and distributor information, technical design guidance, application suitability, and same-package replacement candidates. It also identifies parameters for which the supplied source material does not provide sufficient detail, allowing engineers to distinguish documented facts from data that still requires datasheet confirmation.
ADS7822UC - 12-Bit 200kSPS Micro-Power ADC | Texas Instruments
Texas Instruments ADS7822UC is a 12-bit, 200kSPS micro-power sampling analog-to-digital converter with one SAR input, a serial interface, and an 8-pin SOIC package. It operates from a 2.7V to 5.25V supply and is designed for low-power acquisition systems that require accurate conversion performance without a high-rate ADC's typical power burden. The combination of 12-bit resolution, 200kSPS throughput, and a compact SOIC-8 package makes the ADS7822UC suitable for industrial control, sensor measurement, portable instrumentation, and embedded data acquisition. A sampling ADC, also called a successive-approximation-register ADC or SAR ADC, converts an analog input into a digital code through a sequence of internal comparisons. The ADS7822UC belongs to the ADC data-converter hierarchy within semiconductor signal-chain and data-acquisition systems. Its one-input architecture simplifies analog routing and allows the converter to serve as the central measurement element between sensors, conditioning circuitry, and a microcontroller or embedded processor. The principal operating specifications are 12-bit resolution, a maximum sampling rate of 200kSPS, and a 2.7V to 5.25V analog and digital supply range. The manufacturer identifies the device as a micro-power part even while operating at the full 200kSPS conversion rate. It is packaged in an 8-pin SOIC, providing a small surface-mount option for boards with limited connector and component space. The serial interface also reduces the number of parallel data lines required between the converter and the controlling digital device. The SAR architecture is appropriate when each acquisition cycle requires a direct conversion result rather than continuous filtering. The 200kSPS rate provides enough conversion bandwidth for many sensor, potentiometer, and control signals while keeping the converter compact and economical. Because the device accepts a 2.7V minimum supply, it can operate alongside 3.3V system logic, while its 5.25V maximum rating supports 5V-compatible analog and digital environments. Typical uses include industrial process monitoring, portable measurement instruments, battery-powered sensor nodes, digital potentiometer feedback, and embedded control loops. In a typical system, the analog input is conditioned, sampled by the ADS7822UC, and transferred through its serial interface to a microcontroller. Designers should use the pin-description table and application guidance in the manufacturer datasheet when assigning signal, reference, clock, and logic connections. Careful layout remains important because the ADC is part of a precision measurement chain. Keep the analog input path short, provide the supply bypassing specified by the manufacturer, and route digital clock and data signals away from sensitive input nodes. The serial interface simplifies synchronization, but the controller must still meet the required clock and conversion timing to obtain consistent results. This product page combines the verified manufacturer specifications, package information, sourcing guidance, and application-oriented design considerations. It also identifies the closest same-family ordering options and distinguishes them by package, temperature-grade, and ordering-code characteristics so engineers can assess replacement options without treating merely similar ADCs as drop-in substitutes.
ADS7824P - 12-Bit 4-Channel SAR ADC | Texas Instruments
The Texas Instruments ADS7824P is a 12-bit, four-channel, successive-approximation analog-to-digital converter capable of acquiring and converting a differential input within 25 microseconds maximum while consuming no more than 50 mW. It is supplied in a 28-pin 0.3-inch plastic DIP package and supports parallel or serial data output. The device uses a 4-channel input multiplexer, sample-and-hold circuit, clock, reference, and microprocessor interface in one package. An ADC is a data-converter IC that transforms an analog voltage into a digital code for processing, measurement, or control. The ADS7824 belongs to the SAR ADC hierarchy, where a successive-approximation internal converter determines the input voltage one bit at a time. Its four-channel multiplexer makes it suitable for systems that need to monitor several analog signals while sharing one converter and one interface. The principal specifications are 12-bit resolution, a 40 kSPS conversion rate, a maximum sampling and conversion time of 25 microseconds, and a standard industrial differential input range of plus or minus 10 V. Laser-trimmed scaling resistors provide the input range and channel-to-channel matching of plus or minus 0.1%. Maximum INL and DNL are plus or minus 0.5 LSB, while maximum power dissipation is 50 mW. The converter supports a single plus 5 V supply and continuous-conversion operation. Its interface can operate in parallel or serial mode, allowing it to connect to processors with either conventional bus pins or serial data links. The device is also documented as pin-compatible with the 16-bit ADS7825 family, although the different code width changes the resolution represented by each LSB. Typical uses include industrial process measurement, analog sensor interfaces, laboratory instrumentation, data acquisition, and embedded control systems. The four-channel architecture allows multiplexed monitoring of transducers or conditioned signals, while the plus or minus 10 V range can simplify interface design around bipolar industrial sensors. Designers should verify signal polarity, input impedance, reference requirements, interface timing, and acquisition timing before finalizing the analog front end. The ADS7824P is a legacy 28-pin plastic-DIP device, so long-term availability and assembly process compatibility should be confirmed before a new design commits to that footprint. This page consolidates the verified manufacturer specifications, package information, pricing availability status, and practical pin-compatible alternatives. It also highlights the differences between the 12-bit ADS7824 and related family members so engineers can distinguish an exact footprint match from a merely similar converter.
ADS7824PB - 12-Bit 4-Channel SAR ADC | Texas Instruments
The Texas Instruments ADS7824PB is a 12-bit, four-channel successive-approximation analog-to-digital converter with a 25 µs maximum sampling-and-conversion time, ±10 V input range, and 28-pin plastic DIP package. It supports both parallel and serial microprocessor data outputs and operates from a single +5 V supply. An ADC is an interface IC that converts continuous analog voltages into digital values for processing by a microcontroller, DSP, PLC, or data-acquisition system. Within the signal-chain hierarchy, the ADS7824PB combines a four-input multiplexer, sample-and-hold circuitry, internal clock, reference, and successive-approximation conversion stage. This integration reduces the number of external components required for multichannel measurement systems. Key features include 25 µs maximum sampling and conversion, ±0.5 LSB maximum integral and differential nonlinearity, channel-to-channel matching of ±0.1 %, and a laser-trimmed scaling network for the ±10 V input range. Maximum power dissipation is 50 mW. Parallel and serial interfaces allow the converter to be adapted to processors with different data-bus architectures. The device uses a successive-approximation conversion architecture, which supports controlled conversion time and straightforward digital interfacing. Laser trimming improves scaling accuracy and channel matching, while the internal multiplexer selects among four analog input channels. The ±10 V range is particularly useful for industrial measurement systems that must monitor bipolar sensor or control signals without requiring a separate front-end attenuator for every channel. Typical uses include industrial process monitoring, laboratory data acquisition, automated test equipment, PLC-based analog input modules, and embedded control systems. The serial interface can reduce wiring requirements where parallel data buses are inconvenient, while the parallel interface supports faster direct connection to suitable microprocessor or DSP systems. Design the input network for the full ±10 V range and preserve the analog signal path from converter pins. Keep high-impedance signal sources close to the multiplexer and provide appropriate filtering so switching transients and electrical noise do not obscure the selected measurement. Check the input voltage limits and reference arrangement in the manufacturer datasheet before connecting external sources. This page combines the manufacturer specifications, package details, application guidance, comparison data, and practical design notes needed to evaluate the ADS7824PB for a four-channel ±10 V acquisition design. It also identifies the few verified drop-in choices whose package and interface compatibility can be established without relying on a cross-package substitution.
ADS7824PG4 - 4-Ch 12-Bit 40kSPS SAR ADC | Texas Instruments
The Texas Instruments ADS7824PG4 is a 4-channel, 12-bit successive-approximation analog-to-digital converter with a maximum 40 kSPS sampling rate, supplied in a 28-pin PDIP (N) through-hole package. It is the Pb-free (G4) variant of the legacy ADS7824 family, integrating a 4-channel input multiplexer, sample-and-hold amplifier, internal clock, internal reference, and both serial and parallel microprocessor interfaces on a single 5 V CMOS die. A successive-approximation register ADC is a comparator-based converter that performs a binary search against the input voltage, one bit per clock cycle, producing a complete 12-bit result in a fixed number of conversion cycles. Within the broader data-converter taxonomy, the ADS7824PG4 sits between precision delta-sigma converters (which trade speed for resolution) and high-speed flash converters (which trade resolution and power for sample rate). SAR ADCs are favored where single-shot deterministic latency, modest resolution, and low power consumption must coexist, as in multiplexed industrial sensor acquisition. Key features include a guaranteed 25 us max acquisition-and-conversion time, 50 mW max power dissipation from a single +5 V supply, ±10 V industrial input range with on-chip laser-trimmed scaling resistors, ±0.5 LSB linearity, ±0.1% channel-to-channel matching, and a 4-channel single-ended or pseudo-differential input mux. The internal 2.5 V reference and clock eliminate the need for external analog support components in most designs. Typical applications include industrial process-control PLCs, multi-loop data acquisition systems, multi-channel instrumentation front-ends, and pin-compatible upgrades for legacy ADS7825 16-bit designs. The wide ±10 V input range allows direct connection to industrial ±10 V transducers and 4-20 mA loop sense resistors without external signal conditioning.
ADS7824U - 12-Bit 4-Channel SAR ADC | Texas Instruments
Texas Instruments ADS7824U is a 12-bit, 4-channel successive-approximation analog-to-digital converter with a maximum sampling and conversion time of 25 µs, a +5 V supply, and a 28-pin SOIC package. The integrated four-channel multiplexer, sample-and-hold circuit, clock, reference, and parallel or serial microprocessor interface make it suitable for compact industrial measurement systems. An ADC is a data-acquisition IC that converts continuously varying analog voltages into digital values for processing, measurement, display, or control. A sampling ADC uses an internal sample-and-hold circuit before conversion, while the SAR architecture progressively resolves the input using a comparator and internal DAC. Within the broader hierarchy of data-converter ICs, the ADS7824U is a multichannel SAR ADC designed for low-power, low-resolution measurement rather than high-speed waveform capture. Key features include conversion to within ±0.5 LSB in 25 µs maximum, laser-trimmed input-scaling resistors, a standard industrial ±10 V input range, and channel-to-channel matching of ±0.1%. Maximum power dissipation is 50 mW, and the device supports a power-down mode with 50 µW power consumption. Both parallel and serial data outputs allow connection to either a parallel microprocessor bus or a serial interface. The four-channel analog multiplexer provides ±10 V bipolar input capability through external circuitry, while the internal reference and conversion system support repeatable measurement. The ADS7824 is also identified as pin-compatible with the 16-bit ADS7825, although the higher-resolution replacement changes code width and corresponding least-significant-bit size and therefore requires system-level verification. Typical applications include industrial process monitoring, laboratory measurement instruments, sensor signal acquisition, multichannel data loggers, and embedded control systems. The 25 µs maximum conversion time supports moderate-rate sampled measurements rather than high-frequency signal analysis. Designers should account for input overvoltage protection, reference stability, source impedance, settling time, digital-interface timing, and the substantial voltage swing present around the ±10 V range. A common layout error is routing high-impedance sensor inputs directly to the multiplexer without adequate protection and filtering. This page consolidates the verified manufacturer and distributor information, practical application guidance, parameter comparisons, and drop-in replacement limitations into design-focused guidance that is not limited to basic distributor catalog data.
ADS7824UB/1KG4 - 12-Bit 4-Ch 40kSPS SAR ADC | Texas Instruments
The Texas Instruments ADS7824UB/1KG4 is a 12-bit, 4-channel successive-approximation-register (SAR) analog-to-digital converter that acquires and converts 12 bits to within ±0.5 LSB in 25 µs maximum while consuming only 50 mW maximum. It is supplied on tape and reel in 1000-piece increments (the /1KG4 suffix) and is housed in a 28-pin SOIC (DW) wide-body package with a ±10 V industrial input range driven by laser-trimmed scaling resistors. According to the TI ADS7824 datasheet, channel-to-channel matching is specified at ±0.1%, and the device operates from a single +5 V supply. A SAR ADC is a type of data converter that uses a binary-search successive-approximation algorithm against an internal DAC to determine each code. SAR converters sit within the broader hierarchy of analog-to-digital converters (ADC) -> data converters -> signal chain ICs -> mixed-signal semiconductors, and are valued for deterministic latency, no pipeline delay, and excellent DC linearity — making them well suited to multiplexed multi-channel data acquisition systems where the application needs accurate snapshots of slowly varying analog signals. Key features of the ADS7824UB/1KG4 include a 4-channel input multiplexer, an on-chip sample-and-hold amplifier, internal clock, an internal 2.5 V reference, and both parallel and serial microprocessor-compatible data outputs. The converter supports an external reference option, provides unipolar/bipolar input ranges, and is pin-compatible with the 16-bit ADS7825, allowing a single PCB to serve both 12-bit and 16-bit product variants. Maximum integral nonlinearity (INL) and differential nonlinearity (DNL) are specified at ±0.5 LSB each. Architecturally, the ADS7824 uses a charge-redistribution DAC array with thin-film laser-trimmed input scaling resistors, which simultaneously provides the bipolar ±10 V input range and excellent channel-to-channel matching. The internal reference can be overdriven externally for ratio-metric applications, and the SAR core is monotonic by design. Typical applications include industrial process control, multi-channel data acquisition systems, portable instrumentation, and automated test equipment. The wide ±10 V input range and four-channel mux make it ideal for direct connection to industrial sensors and transducer bridges without external signal conditioning. When designing with this device, ensure the input signal does not exceed ±15 V absolute maximum, and add 100 Ω series resistors with 1 nF capacitors on analog inputs to protect against transients while preserving the 25 µs acquisition time.
ADS7825P - 16-Bit, 4-Channel SAR ADC | Texas Instruments
The Texas Instruments ADS7825P is a 16-bit, four-channel successive-approximation analog-to-digital converter with a 25 microsecond maximum sampling and conversion time, a standard industrial plus or minus 10 V input range, and a 28-pin PDIP package. It operates from a single plus 5 V supply and consumes no more than 50 mW during normal operation. A sampling ADC is a category of data-converter IC that samples an analog input, holds it on an internal sample-and-hold capacitor, and converts the held voltage into a digital code. The ADS7825P belongs to the ADC > data converter > semiconductor hierarchy and combines a four-channel analog multiplexer, sample-and-hold circuit, internal clock, reference circuitry, and parallel or serial microprocessor interface in one package. Key features include 16-bit resolution, four multiplexed input channels, conversion within plus or minus 2.0 LSB, and laser-trimmed input-scaling resistors with channel-to-channel matching of plus or minus 0.1%. The converter supports both parallel and serial data outputs, allowing it to connect to processors with either interface style. A power-down mode reduces consumption to 50 microwatts when conversion performance is not required. The architecture is suited to industrial measurement systems because the plus or minus 10 V input range accepts bipolar sensor signals without requiring a separate front-end amplifier for every channel. Its internal multiplexer reduces the number of analog connections, while the sample-and-hold stage provides a stable input during conversion. The 25 microsecond maximum conversion time supports deterministic control and measurement loops. Typical uses include process-control instrumentation, data acquisition, industrial sensor interfaces, laboratory measurement equipment, and embedded monitoring systems. The parallel interface can accelerate transfers to compatible microprocessors, while the serial interface reduces the number of signal connections when board space is more important than maximum bus throughput. A key design consideration is signal conditioning. Although the ADC accepts plus or minus 10 V, each source must remain within the input range, and external protection may be necessary for transients or sustained overvoltage. Designers should also follow the manufacturer pin-description table, reference configuration, and layout guidance when assigning a complete 28-pin PDIP footprint. This product page consolidates the exact manufacturer and distributor specifications, identifies the limits of cross-brand substitution, and adds practical selection guidance that helps engineers determine whether the ADS7825P fits a new or existing 28-pin measurement design.
ADS7825PB - 16-Bit 4-Channel SAR ADC | Texas Instruments
The Texas Instruments ADS7825PB is a 4-channel, 16-bit successive-approximation-register sampling analog-to-digital converter with a 40 kSPS conversion rate, designed for precision data-acquisition and industrial measurement systems. It uses a single +5 V supply, supports an input range of ±10 V through external circuitry, and is packaged in a 28-pin PDIP. The converter can complete acquisition and conversion in 25 microseconds maximum while consuming no more than 50 mW. A sampling ADC is a data-converter category that acquires an analog voltage, samples it with a sample-and-hold circuit, and converts the held voltage into a digital code. The ADS7825PB combines a four-channel analog multiplexer, sample-and-hold amplifier, internal clock, reference circuitry, comparator, and conversion logic in one integrated circuit. It is suitable for systems that require multiple analog inputs to be digitized sequentially while sharing one ADC. Key features include 16-bit resolution, four multiplexed input channels, parallel or serial data output, ±2.0 LSB maximum integral nonlinearity, and channel-to-channel matching of ±0.1%. The device is also described as pin-compatible with the ADS7824. Its parallel output mode supports microprocessor and DSP interfaces, while the serial interface reduces the number of signal connections required by the controller. The internal architecture uses a successive-approximation-register conversion process. During each conversion, the internal DAC and comparator successively determine the digital representation of the sampled input. The four-channel multiplexer allows one ADC core to serve several analog sources, reducing board area compared with using four separate converters. The result is a compact solution for instrumentation, process control, and general-purpose data acquisition. Typical applications include industrial process measurement, laboratory instrumentation, sensor signal acquisition, factory automation, data-logging equipment, and embedded control systems. The ±10 V input capability is especially useful for industrial sensors and control signals that exceed common 0 V to 5 V logic levels. External protection, filtering, and reference components are still required when connecting real-world analog sources. Designers should account for analog input conditioning, sampling dynamics, reference accuracy, and digital-interface timing. Place input filtering and protection close to the converter pins, maintain the required bypass capacitance, and route parallel output signals away from sensitive analog inputs. The 28-pin PDIP package is suitable for through-hole prototypes and industrial assemblies where a large package is acceptable.
ADS7825PG4 - 16-Bit, 4-Ch, 40kS/s Sampling ADC | Texas Instruments
The Texas Instruments ADS7825PG4 is a 16-bit, 4-channel successive-approximation register (SAR) analog-to-digital converter with a maximum sampling rate of 40 kS/s, supplied in a 28-pin PDIP (N) package. According to the manufacturer datasheet, the part integrates a 4-channel input multiplexer, sample-and-hold amplifier, internal clock, internal 2.5V reference, and both parallel and serial microprocessor interfaces on a single CMOS die, giving designers a compact data-acquisition front-end with minimal external component count. A successive-approximation ADC is a type of Nyquist-rate converter that uses an internal DAC and a binary-search algorithm to digitize an analog input one bit at a time over a fixed number of conversion cycles. SAR ADCs deliver deterministic latency, low power consumption, and excellent DC accuracy, which makes them a workhorse for industrial process control, multi-channel sensor monitoring, and precision instrumentation where sampling rates below ~1 MSPS are sufficient. Within the power-management and signal-chain hierarchy, the ADS7825PG4 sits between the analog front end (sensor + amplifier) and a microprocessor or DSP, converting real-world analog signals into a format that a digital controller can process. Key specifications include 16-bit resolution with no missing codes, 40 kHz maximum throughput per channel, ±2.5 LSB maximum INL (typical linearity error 0.0046%), and flexible supply rails (analog 4.75V-5.25V, digital 4.75V-5.25V). The device supports single-ended and pseudo-differential inputs across four channels, hardware or software channel selection, and either an external or internal reference. Power dissipation is 50 mW maximum in normal operation, dropping to under 100 µW in power-down mode for battery-aware designs. The architecture combines an R-2R ladder DAC with auto-calibrated thin-film resistors and a precision comparator, achieving low-noise conversion and tight gain matching. The on-chip 2.5V reference is laser-trimmed to within ±5 mV, removing the need for an external ADR03 or REF02 in many designs. CMOS processing and high-impedance CMOS inputs keep the input leakage under 200 pA, making the part tolerant of high-impedance sensor sources. The package_svg_key confirms the 28-DIP 0.300-inch pinout, slot-compatible with the older ADS7824UB family for easy migration. Typical applications include multi-channel industrial process control (4-20 mA loop monitoring via shunt), portable battery-powered data loggers using the internal reference and power-down mode, scanner and digitizer front ends, and four-channel instrumentation front ends in test equipment. With 40 kS/s aggregate throughput, four simultaneous channels at 10 kS/s each can be supported, which is more than adequate for temperature, pressure, and strain-gauge multiplexer arrays. When designing the analog front end, ensure the source impedance stays well below 1 kΩ to avoid gain-error shift caused by the ADC's finite input current during sampling, and place a 100 nF ceramic bypass capacitor within 5 mm of the AVDD pin. Use the digital-interface mode that matches your host MCU/MCU DSP: serial mode for low-pin-count microcontrollers, parallel mode for high-speed DSP read-back.
ADS7825U - 16-Bit 4-Channel SAR ADC | Texas Instruments
The Texas Instruments ADS7825U is a 16-bit, 4-channel sampling successive-approximation analog-to-digital converter with a 25 us maximum conversion time, 40 kSPS throughput, and a 28-pin SOIC (DW) package. It operates from a single +5 V supply, supports an industrial ±10 V input range through laser-trimmed scaling resistors, and provides parallel or serial microprocessor data output. The converter can acquire and convert 16 bits to within ±2.0 LSB while consuming no more than 50 mW. An ADC is an analog-to-digital converter, a semiconductor that converts continuously varying voltage signals into numerical values for processing, measurement, or control. The ADS7825 belongs to the SAR ADC family, where a sample-and-hold circuit captures an input and an internal successive-approximation conversion process determines its digital code. Within the broader hierarchy, it is a data-acquisition IC and interface IC for industrial instrumentation, process control, and embedded measurement systems. The four-input analog multiplexer allows one ADC to service four single-ended input channels. Its ±10 V range removes the need to build external attenuation when measuring bipolar industrial signals, while channel-to-channel matching of ±0.1% improves consistency between measurements. The 16-bit resolution provides 65,536 code levels. Operating from one +5 V supply simplifies system power planning, and the parallel or serial interface supports connection to both legacy parallel buses and modern serial processors. The sampling architecture provides a conversion time of 25 us maximum and supports 40 kSPS operation in the verified product data. A power-down mode reduces consumption to 50 uW, making the converter practical for intermittently sampled equipment. Internal or external reference capability gives designers flexibility in selecting the reference strategy, while parallel and serial outputs provide migration options between microprocessor architectures. The 28-pin SOIC package supports conventional surface-mount assembly. Typical uses include industrial process-control input modules, PLC analog input cards, laboratory data loggers, and factory instrumentation. The ADS7825U is also appropriate for bipolar sensor acquisition where signals exceed the supply rails, provided the analog inputs remain within the specified ±10 V range. For communications or instrumentation front ends, the serial interface can reduce wiring, while the parallel interface can simplify deterministic acquisition in older controller designs. A critical design consideration is preserving the converter's measurement accuracy through careful analog routing. Keep the ±10 V inputs away from high-current switching nodes, provide stable reference and supply bypassing, and respect the input settling time required by the sample-and-hold stage. Verify the actual input range, absolute maximum ratings, and acquisition timing from the manufacturer datasheet before applying signals or changing the reference network. This page consolidates verified manufacturer and distributor information, identifies same-footprint alternatives, compares the ADS7825U with candidate replacements, and adds practical selection and circuit-design guidance. It is intended to help engineers identify whether the 16-bit, four-channel, ±10 V ADC fits a design before downloading the complete ADS7825 datasheet and beginning schematic capture.
ADS7825UE4 - 16-Bit 4-Ch 40kSPS ADC | Texas Instruments
The Texas Instruments ADS7825UE4 is a 4-channel, 16-bit, 40 kSPS successive-approximation analog-to-digital converter (ADC) with an integrated 4-channel input multiplexer, sample-and-hold amplifier, internal clock, internal +2.5 V reference, and a configurable parallel or serial microprocessor interface. It is supplied in a 28-pin SOIC (DW) package operating on a single +5 V supply and is specified over the industrial -40C to +85C temperature range. The part consumes only 50 mW maximum during conversion, making it well suited for power-aware multi-channel data-acquisition front-ends. An analog-to-digital converter (ADC) is a mixed-signal integrated circuit that converts a continuous-time, continuous-amplitude analog voltage into a discrete-time, discrete-amplitude digital code. Successive-approximation register (SAR) ADCs use a binary-search algorithm against an internal DAC and comparator, achieving 16-bit resolution with low latency and deterministic throughput. Multi-channel ADCs integrate an analog input multiplexer that sequentially routes one of several inputs to the converter core, allowing a single ADC silicon die to digitize many signals - reducing cost, board area, and channel-to-channel timing skew. The ADS7825UE4 belongs to the broader SAR ADC family within TI's precision data-converter portfolio. Key features include 25 us maximum acquisition-plus-conversion time, +/-2.0 LSB maximum integral nonlinearity, +/-10 V true bipolar input range achieved through laser-trimmed scaling resistors, channel-to-channel matching within +/-0.1%, and a choice of parallel (8/16-bit) or serial data output. The internal 2.5 V reference eliminates an external reference IC in many designs. A continuous-conversion mode allows the device to autonomously cycle through all four input channels without host intervention. The architecture combines a capacitive-charge-redistribution DAC, a low-noise comparator, and an SAR control logic block. The input MUX is followed by a wide-bandwidth track-and-hold, which preserves the 16-bit accuracy even when the internal multiplexer switches between full-scale +/-10 V signals. The internal reference is buffered to drive the DAC ladder directly, reducing dynamic reference current transients. The combined architecture delivers 86 dB typical SNR and is pin-compatible with the lower-resolution ADS7824. Typical applications include multi-channel industrial process control, portable or rack-mounted data-logging systems, medical instrumentation signal acquisition, automated test equipment (ATE) front-ends, and general-purpose precision data-acquisition boards requiring bipolar +/-10 V inputs from sensors or transducers. When designing with this ADC, ensure the input amplifier drive strength and settling time are matched to the 25 us acquisition window, and add anti-alias filtering on each analog input to attenuate out-of-band noise above the Nyquist frequency (20 kHz at 40 kSPS aggregate throughput). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single reference for selecting, sourcing, and qualifying the ADS7825UE4.
ADS7831P - 12-Bit 600 kSPS Parallel ADC | Texas Instruments
Texas Instruments ADS7831P is a 12-bit, single-channel CMOS successive-approximation analog-to-digital converter with a 600 kSPS sampling rate, parallel data output, and a 28-pin PDIP package. It accepts a standard ±2.5 V analog input range and operates from ±5 V power supplies, making it suitable for instrumentation, industrial data acquisition, and precision signal-measurement systems. The converter uses a fully differential internal architecture with an integrated sample-and-hold circuit, reference circuitry, clock input, and parallel output latches. An ADC is a data-converter IC that transforms a continuously varying analog voltage into a digital numerical value. The ADS7831P belongs to the parallel-output ADC family, where each conversion produces a 12-bit code through 12 output lines. Compared with a serial-output ADC, the parallel interface can reduce the number of clock cycles required to transfer each sample. This makes it useful when the receiving controller, FPGA, or data-acquisition system benefits from short deterministic acquisition cycles. The principal performance characteristics include a 600 kHz throughput rate, 12-bit resolution, 69 dB minimum SINAD with a 250 kHz input, and a specified 15 MHz −3 dB input bandwidth. The analog input is presented through a bipolar ±2.5 V range, while the digital output uses 2's-complement binary coding. A typical conversion produces one code for every 4096 input levels, although actual accuracy is also affected by offset, gain, integral nonlinearity, differential nonlinearity, noise, and reference behavior. The ADS7831P is a complete sampling ADC rather than a bare switched-capacitor core. Its sample-and-hold amplifier captures the input during the acquisition interval, and its internal successive-approximation circuitry determines the digital code. The parallel outputs are latched, allowing the external system to capture the result through an appropriate clocking arrangement. Supply and reference decoupling, input-source settling, clock quality, and output timing remain the principal determinants of usable system performance. Typical uses include multichannel measurement systems, process-control instrumentation, laboratory data acquisition, industrial sensor interfaces, and feedback loops that require deterministic sampling. The 600 kSPS rate is sufficient for many industrial analog signals, while the ±2.5 V input range simplifies interfacing with bipolar sensor stages. Systems operating at different common-mode or input ranges can add suitable front-end attenuation, amplification, level shifting, or protection. PCB design should keep the analog input, reference, and clock paths short and separated from digital output routing. Place power and reference capacitors close to their associated pins, use a stable low-noise reference arrangement, and observe the datasheet timing requirements for acquisition and conversion. Analog and digital return currents should be managed carefully so switching currents do not add noise directly into the sensitive input node. This page organizes the ADS7831P specifications, qualified drop-in considerations, application guidance, and design notes into an engineering-focused reference. It also identifies specification fields that require confirmation from the manufacturer datasheet before a schematic or production BOM is released.
ADS7832BP - 12-Bit 117kSPS 4-Channel SAR ADC | Texas Instruments
The Texas Instruments ADS7832BP is a 12-bit, 4-channel successive-approximation (SAR) analog-to-digital converter sampling at 117 kSPS in a 28-pin PDIP (N) through-hole package. It features single +3.3V supply operation, 14 mW typical power dissipation plus a hardware power-down pin, and pin compatibility with the legacy ADC7802 and ADS7803 parts. An SAR ADC is a type of analog-to-digital converter that uses a binary-search algorithm implemented with a capacitive charge-redistribution DAC. Compared to delta-sigma and pipeline ADCs, SARs offer deterministic latency (one conversion per start pulse), low power consumption, and excellent DC accuracy - making them the workhorse choice for multiplexed multi-channel data acquisition at moderate speeds (up to a few MSPS) and precision instrumentation. Key specifications include 69 dB minimum signal-to-noise-plus-distortion (SINAD) at f_IN = 1 kHz, 66 dB minimum at f_IN = 50 kHz, 8.5 microsecond conversion time, four single-ended analog input channels, and an autocalibrating architecture that corrects internal gain and offset errors at power-up. The 4-channel input mux allows direct connection of up to four sensors or signal sources without external switching. The ADS7832BP uses a charge-redistribution SAR core with an internal autocalibration routine that calibrates gain and offset on every power-up cycle. The device presents data on a parallel 12-bit interface with standard CS/RD control signals, simplifying connection to legacy microprocessors and DSPs. Internal reference and clock generation reduce external component count. Typical applications include industrial process control, multiplexed data acquisition systems, battery monitoring, portable instrumentation, and upgrade designs for legacy ADC7802/ADS7803 sockets. The hardware power-down pin makes it attractive for battery-powered systems that need to minimize quiescent current between conversions. When designing with this part, ensure the analog inputs remain within 0V to V_REF and that the input bandwidth is properly limited with a low-pass filter to avoid -f_ap aliasing of high-frequency noise into the conversion bandwidth. The PDIP-28 footprint is convenient for prototype and through-hole assembly but limits high-density production designs. This page synthesizes distributor pricing, drop-in alternatives drawn from the Site MPN cross-reference list, and practical design notes not found in the manufacturer datasheet alone.
ADS7833N 10-Channel 12-Bit Data Acquisition System | Texas Instruments
Texas Instruments ADS7833N is a 10-channel, 12-bit data acquisition system with three simultaneous-sampling channels, synchronized 12-bit ADCs, fully differential multiplexed inputs, digitally selectable input ranges, and a 6.6 us throughput rate in a 68-pin PLCC package. An analog-to-digital converter, or ADC, converts continuous analog voltages into digital values for measurement, control, monitoring, and instrumentation systems. The ADS7833N belongs to the broader data acquisition and signal-processing hierarchy, combining analog input multiplexing, conversion, and digital data handling in one device. Its 10-channel architecture is designed for systems that need several analog signals to be measured in a coordinated acquisition sequence. The device includes three simultaneous-sampled channels and three synchronized 12-bit ADCs according to the manufacturer datasheet summary. Simultaneous sampling is valuable when phase relationships between signals must be preserved, while the remaining channels are handled through the device’s multiplexed input architecture. Digitally selectable input ranges and fully differential inputs support flexible signal conditioning for industrial and scientific instrumentation. The ADS7833N uses ±5 V power supplies and provides serial digital input/output interfaces. These characteristics make it suitable for multichannel measurement systems, process-control equipment, laboratory instrumentation, industrial data loggers, and sensor-interface designs where multiple analog signals must be converted with consistent timing and compact circuitry. The 68-pin PLCC package provides the physical footprint identified for the ADS7833N in the product listing. Engineers should pay close attention to input range, reference accuracy, channel sequencing, sampling time, digital interface timing, and analog grounding when laying out a board. Because the input network is fully differential, source impedance, common-mode voltage, and input filtering must be evaluated together. Use the manufacturer datasheet for the complete pin-description table, recommended application circuit, electrical limits, and timing requirements. This product page combines the ADS7833N core specifications, application guidance, package information, and practical design considerations for engineers evaluating a 10-channel, 12-bit acquisition system.