Audio Codecs
بەرهەمەکان (190+)
CS8416-DSZ 192kHz 8-Channel Audio Receiver | Cirrus Logic
Cirrus Logic CS8416-DSZ is a monolithic CMOS digital audio interface receiver supporting sample rates up to 192 kHz, with an 8:2 input multiplexer for selecting among eight stereo S/PDIF or AES/EBU audio inputs. The device is packaged in a 28-pin SOIC and is designed for consumer and professional audio equipment that must route multiple digital audio sources into one processing chain. A digital audio receiver is an interface IC that accepts encoded digital audio streams, detects their format and clocking information, and presents synchronized audio data and status to the downstream signal processor. In the signal hierarchy, the CS8416 belongs to the digital audio interface family, connecting a source-specific transport such as S/PDIF or AES/EBU to an audio processor, digital mixer, converter system, or test instrument. The CS8416 can decode streams conforming to IEC60958, S/PDIF, EIAJ CP1201, or AES3 interface standards. Its eight stereo inputs reduce the number of physical receiver blocks needed in a multichannel system, while the 8:2 multiplexer allows the system to select two input channels. Operation to 192 kHz supports professional and high-resolution audio paths, including multichannel home-theater equipment, broadcast infrastructure, studio interfaces, and digital audio routing equipment. As a monolithic CMOS device, the CS8416 combines the physical-layer receiver, format handling, input multiplexing, and clock-related functions in one package. The manufacturer lists the family in 28-pin TSSOP, SOIC, and QFN packages, with commercial-grade versions specified for -10°C to +70°C and automotive-grade versions for -40°C to +85°C. The CS8416-DSZ ordering code identifies the 28-pin SOIC variant. Typical applications include professional digital mixers, surround-sound processors, recording interfaces, optical and coax digital-audio receivers, broadcast monitoring equipment, and multi-zone listening systems. The CDB8416 customer demonstration board is also identified by the manufacturer as a useful platform for evaluation and implementation guidance. Designers should follow the manufacturer datasheet for the complete pin-description table, supported electrical states, input routing controls, and reference-clock requirements. PCB layout should keep digital audio traces short and controlled, provide continuous ground-plane return paths, and place decoupling and clock circuitry close to the device. The 192 kHz capability should also be considered alongside the required master clock, external component, and signal-integrity implementation. This product summary combines the manufacturer’s device overview and datasheet information with sourcing-oriented comparisons and design guidance. It highlights the CS8416-DSZ’s defining combination of 192 kHz operation, eight selectable stereo digital-audio inputs, support for S/PDIF and AES/EBU, and a 28-pin SOIC footprint for precise receiver selection and PCB integration.
CS8416-DZZ 192kHz Digital Audio Receiver | Cirrus Logic
Cirrus Logic CS8416-DZZ is a monolithic CMOS digital audio interface receiver that decodes one of eight stereo pairs according to IEC60958 S/PDIF, EIAJ CP1201, or AES3 interface standards. The receiver supports sample rates up to 192 kHz and provides an 8:2 input multiplexer for selecting among as many as eight digital audio inputs. It is packaged in a 28-pin TSSOP, making it suitable for compact professional and consumer audio equipment. A digital audio receiver is an interface IC that recovers synchronized audio data from a serial digital-audio link. Within the broader semiconductor hierarchy, the CS8416 belongs to the digital-audio interface-receiver class, then to interface ICs, and ultimately to general-purpose integrated circuits. Its receiver architecture supports digital consumer and professional audio formats while presenting a common internal interface to the rest of the audio system. The eight-input multiplexer is particularly useful when one processor must select among multiple optical, coaxial, or embedded digital-audio sources. The CS8416 supports digital audio sampling through 192 kHz and recognizes IEC60958, EIAJ CP1201, and AES3 inputs. Low-jitter clock recovery is specified to improve signal integrity and audio quality, while standalone operation allows the receiver to function without a microcontroller. These features make the device useful in equipment that must consolidate several digital-audio sources before conversion, processing, or distribution. The 28-pin TSSOP also allows direct placement on conventional surface-mount audio boards. The receiver operates from a single CMOS supply and includes serial and parallel data interfaces for integrating recovered audio into a system. Although the exact supply range, operating-temperature limits, pin assignments, input sensitivity, and electrical timing values are not stated in the available product records, the CS8416 family is identified as a 192 kHz digital audio receiver with eight channels and eight stereo input pairs. Its clock-recovery and multiplexing functions reduce the need for separate source-selection logic in multi-input systems. Typical applications include A/V receivers, multimedia speakers, digital mixing consoles, automotive audio systems, professional recording equipment, and other products that accept S/PDIF or AES/EBU audio. In an A/V receiver, one device can select among eight digital sources and deliver synchronized data to a downstream DSP or DAC. In a mixing console or recording system, the receiver can serve as a front-end for clock recovery and source routing before multi-channel processing. Designers should treat the S/PDIF input and clock-recovery paths as sensitive high-speed digital interfaces. Route these signals away from noisy switching nodes, maintain short returns, and follow the manufacturer’s reference layout and input-component recommendations. Because the part can operate without a microcontroller, mode and channel-selection design should be validated early rather than assuming external software control will resolve configuration errors. This product record combines the manufacturer’s receiver capabilities with practical comparison and selection guidance. It emphasizes verified sample-rate, interface-format, multiplexing, packaging, and clock-recovery characteristics while clearly separating documented functions from parameters that still require confirmation from the official data sheet.
CS8420-CSZ Stereo Audio Sample-Rate Converter | Cirrus Logic
The Cirrus Logic CS8420-CSZ is a two-channel digital audio sample-rate converter with AES3-type and serial digital audio inputs, AES3-type and serial digital audio outputs, and a 4-wire microcontroller control interface. The converter is packaged in a 28-pin SOIC and operates from a 4.75 V to 5.25 V supply. It is designed for systems that must convert digital audio streams between sampling rates while supporting S/PDIF, AES3, and related serial audio formats. A digital audio sample-rate converter is a specialized interface IC that receives digital audio data at one sampling rate and reconstructs a corresponding output stream at another sampling rate. This capability sits between digital audio interfaces and the broader signal-chain hierarchy of digital audio processing, interface conversion, and semiconductor signal conditioning. Unlike a linear voltage regulator, the CS8420 does not regulate power; it processes and reconstructs digital audio data using clocking, filtering, and serialization circuitry. The CS8420 supports AES3-type and serial digital audio inputs together with AES3-type and serial digital audio outputs. Its serial digital audio ports use a three-wire interface, while configuration is handled through a four-wire microcontroller port. These functions make the device applicable in professional audio equipment, digital mixers, consumer audio systems, and other products requiring asynchronous sample-rate conversion. Familiarity with the AES3 and IEC60958 specifications is assumed for system-level design. The CS8420-CSZ is identified as a consumer-circuit device and is offered in a 28-pin SOIC with a 0.300 inch lead pitch. Its rectangular gull-wing surface-mount package supports conventional PCB assembly and routing. The manufacturer documentation describes the main functional blocks and supply connections, providing the basis for evaluating clock sources, digital-audio routing, control firmware, and power-supply implementation before schematic capture. Typical uses include conversion between asynchronous digital-audio domains, S/PDIF-compatible equipment, digital mixers, and multi-format audio interfaces. In these systems, the converter can bridge incoming AES3 or serial audio with an output domain operating at a different sampling rate. The microcontroller interface allows the host processor to select operating modes and monitor converter behavior, although the complete control register set must be implemented from the manufacturer datasheet. When laying out a CS8420-CSZ board, treat the digital-audio traces as potentially high-speed signals and follow the connection and layout guidance in the manufacturer datasheet. Keep the supply and external connections close to their intended circuit roles, provide the required bypassing, route clocks away from sensitive audio paths, and confirm that connector, transformer, and receiver choices support the selected AES3 or IEC60958 interface. This page organizes the available CS8420-CSZ technical information with package details, verified drop-in alternatives, comparison criteria, and practical design guidance. It is intended to help engineers identify interface requirements, plan PCB implementation, and source an exact MPN without overlooking the distinction between digital audio conversion, clocking, and general-purpose signal processing.
CS8420-DSZ Stereo Audio SRC, 2-Channel, 28-SOIC | Cirrus Logic
The Cirrus Logic CS8420-DSZ is a stereo digital audio sample-rate converter with AES3-type and serial digital-audio inputs, AES3-type and serial digital-audio outputs, and a four-wire microcontroller control interface. It converts between digital audio sampling rates while supporting two-channel processing in a 28-pin SOIC package. Its block-based channel-status and user-data handling enables read, modify, and write operations through the serial control port. A digital audio sample-rate converter, or SRC, is an interface IC that resamples digital audio data when the source and destination systems operate at different sampling rates. This function is required when clock domains, broadcast standards, computer interfaces, and consumer-audio products do not share a common rate. In the product hierarchy, the CS8420 is a stereo digital-audio SRC, an audio interface IC, an interface integrated circuit, and a semiconductor used within professional and consumer audio signal chains. The CS8420-DSZ provides separate AES3-type and serial digital-audio inputs, together with corresponding AES3-type and serial digital-audio outputs. AES3-type connections support professional digital-audio equipment, while serial-audio interfaces allow connection to converters, receivers, transmitters, and digital-audio processing logic. Its two-channel architecture is intended for standard stereo audio rather than multichannel surround systems. Control is provided through a four-wire microcontroller port. According to the Cirrus Logic CS8420 datasheet, channel status and user information can be assembled into block-sized buffers, simplifying read/modify/write operations. This buffered structure is useful when metadata must be inspected, transferred, or updated during audio processing rather than treated as isolated bytes. Typical applications include professional digital-audio equipment, stereo DAC front ends, digital mixers, broadcast and studio interfaces, computer-audio converters, and asynchronous source-clock adaptation. The converter can also bridge a serial digital-audio source to an AES3-type destination when the two interfaces use different sampling rates. In each case, system clocking, control firmware, and format compatibility must be coordinated to avoid synchronization errors. When laying out a design, place input and output interface circuitry near the corresponding pins, provide clean reference and clock connections, and verify that the selected digital-audio format matches the converter configuration. The four-wire control bus should be routed away from high-speed audio signals where practical, with firmware prepared for status changes, buffer access, and unsupported-format conditions. This page combines the CS8420-DSZ product description, a verified 28-SOIC package classification, application guidance, design considerations, and available same-family alternatives. It is intended to help engineers identify whether the device architecture matches the required digital-audio interfaces before beginning schematic or PCB work.
CS8421-CZZ - 32-Bit 192kHz Stereo Audio SRC | Cirrus Logic
The Cirrus Logic CS8421-CZZ is a 32-bit, high-performance monolithic CMOS asynchronous stereo sample-rate converter capable of supporting sample rates up to 192 kHz. The device accepts and produces 32-bit, 24-bit, 20-bit, or 16-bit digital audio data and is packaged in a space-saving 20-pin TSSOP. An asynchronous sample-rate converter sits between digital audio domains that do not share the same clock. The CS8421 converts the incoming audio stream to a new sample rate while supporting fully asynchronous operation, synchronization to an external data clock, or operation from its integrated oscillator. This makes it suitable for digital audio equipment, broadcast systems, consumer converters, and test equipment that must reconcile mismatched audio clocks. The converter uses 32-bit internal processing and supports digital audio word lengths of 16, 20, 24, or 32 bits. Its stereo architecture handles two audio channels in a single package. Input and output interfaces operate from low-voltage digital supply rails, supporting both 2.38 V to 2.62 V and 3.14 V to 5.25 V supply conditions according to the device documentation. The 20-pin TSSOP package reduces board area compared with larger audio converter packages. Its gull-wing lead geometry supports conventional surface-mount assembly and inspection. Commercial-grade ordering information identifies a temperature range of -10°C to +70°C for this package variant. Typical uses include asynchronous digital audio routing, sample-rate normalization between playback and recording domains, professional audio conversion, multimedia equipment, and audio processing subsystems. Because the part can operate without an external clock through its integrated oscillator, it also supports clock-independent conversion where a clean external reference is unavailable. When laying out a design, treat the converter as a precision digital signal-processing block. Keep input and output interface traces short, follow the recommended decoupling arrangement, and provide a stable low-noise supply. Confirm master and slave clock relationships, audio data format, channel assignment, and de-emphasis requirements against the manufacturer pin-description and application guidance before releasing a PCB.
CS8421-EZZ - 32-Bit 192kHz Stereo SRC | Cirrus Logic
Cirrus Logic CS8421-EZZ is a 32-bit, 192 kHz, asynchronous stereo audio sample-rate converter packaged in a 20-pin TSSOP. It accepts digital audio word lengths of 32, 24, 20, or 16 bits and supports completely asynchronous, externally clocked synchronous, and integrated-oscillator operating modes. The device is designed for audio systems that require sample-rate conversion between digital sources and destinations operating at different clock rates. An audio sample-rate converter is a digital audio interface IC that changes the sampling rate of a PCM audio stream while preserving the represented signal. It sits between source and destination audio devices in the digital audio signal chain. The CS8421-EZZ provides two-channel conversion for stereo formats and accommodates 32-bit, 192 kHz-class digital audio while using configurable three-wire serial input and output interfaces. The CS8421-EZZ supports 16-, 20-, 24-, and 32-bit audio data, allowing the system architect to balance resolution against interface bandwidth and processing requirements. Its asynchronous operation is useful when the source and destination do not share a common clock. Alternatively, the converter can synchronize to an external data clock or operate without an external clock through its integrated oscillator. These operating choices support equipment interoperability and standalone clocking arrangements. As a dedicated sample-rate converter, the CS8421-EZZ separates conversion functions from the codecs and digital signal processors found elsewhere in an audio system. The configurable three-wire digital interfaces simplify connection with audio transmitters, receivers, converters, processors, and test equipment. This makes the device applicable to professional audio, consumer audio, broadcast, and digital recording systems where source and destination rates differ. Typical implementations place the CS8421-EZZ between an asynchronous digital audio source and a clocked DAC, or between a digital audio interface and downstream processing. Another practical use is clock adaptation within a multichannel audio subsystem. Because the converter supports both external-clock synchronization and integrated-oscillator operation, a designer can select the operating mode that best matches the system clock architecture and startup behavior. Designers should treat this part as a discontinued product and confirm availability before committing a new production design. PCB layouts should follow the exact pin assignments and exposed-pad requirements in the manufacturer datasheet. Because this converter handles high-speed digital audio, trace routing, grounding, and decoupling require disciplined implementation to minimize data-integrity and clocking problems. This product summary combines the manufacturer’s functional description with package information, application guidance, pin-assignment planning, and replacement analysis. It also highlights the distinction between asynchronous operation, external-clock synchronization, and integrated-oscillator operation, helping engineers determine whether the CS8421-EZZ architecture matches the clocking requirements of the target audio system.
CS8422-CNZ 24-Bit 192kHz Stereo SRC | Cirrus Logic
Cirrus Logic CS8422-CNZ is a 24-bit, 192 kHz, stereo asynchronous sample-rate converter with an integrated digital audio receiver, housed in a 32-QFN package measuring 5 mm by 5 mm. It supports EIAJ CP1201, IEC 60958, AES3, and S/PDIF audio-interface formats. An asynchronous sample-rate converter is a digital audio IC that resamples an input stream to a different clock domain without requiring both sides to share a common master clock. The CS8422-CNZ belongs to the broader sample-rate converter, digital audio interface, interface IC, and semiconductor hierarchy. Its integrated receiver reduces the number of separate devices required when a system must decode digital audio and convert its sampling rate. The converter supports 24-bit audio and operation up to 192 kHz for high-resolution digital audio paths. Its integrated digital audio interface receiver decodes data according to EIAJ CP1201, IEC 60958, AES3, and S/PDIF standards. This combination is useful in professional audio equipment, consumer audio processors, digital mixers, and systems that receive digital audio from several source devices running at different sampling rates. The monolithic CMOS implementation combines stereo asynchronous sample-rate conversion and digital audio reception in one device. That integration can simplify the signal chain and reduce board area compared with separate receiver and SRC components. The converter’s asynchronous architecture is particularly relevant when the source and destination devices do not share a synchronized system clock. Typical applications include digital audio receivers, studio monitor input stages, surround-sound processors, digital mixers, broadcast equipment, and high-end consumer audio products. The CS8422-CNZ can be used between an S/PDIF or AES3 source and an audio processing path requiring sample-rate conversion, provided the system clock, digital audio format, and channel routing are configured correctly. Designers should pay particular attention to supported interface modes, master-clock relationships, word-length settings, and the exposed-pad connection of the 32-QFN package. Use the pin-description table and recommended application circuit in the Cirrus Logic datasheet when assigning pins, supplying analog and digital power, and implementing the PCB footprint. This page organizes the product identity, interface standards, package information, verified alternatives, and practical design considerations into one engineering reference. It also distinguishes confirmed drop-in options from functions that require a different footprint, helping engineers evaluate replacement decisions without confusing similar sample-rate converters with pin-compatible devices.
CS8427-CS - 96 kHz Stereo Digital Audio Transceiver | Cirrus Logic
The Cirrus Logic CS8427-CS is a 96 kHz stereo digital audio interface transceiver with AES3 and serial digital audio inputs, AES3 and serial digital audio outputs, and comprehensive control through a 4-wire microcontroller port. It is identified in distributor data as a one-channel audio transceiver in a 28-pin SOIC package, making it suitable for digital audio routing, format conversion, and embedded audio systems. A digital audio transceiver is an interface IC that accepts digital audio signals, manages the associated clock and control information, and provides corresponding digital outputs. In the broader signal-chain hierarchy, the CS8427-CS belongs to the digital audio interface family within audio and communications ICs, rather than to analog amplifiers or conventional power-management devices. The verified manufacturer information identifies AES3 inputs and outputs, serial digital audio input and output paths, and a 4-wire microcontroller control interface. The control port supports communication with an external controller, while the digital audio paths provide the core conversion and routing function. The CS8427 family is documented in 28-pin SOIC and TSSOP packages, with commercial and automotive temperature-grade variants listed in the manufacturer datasheet listing. The CS8427-CS is particularly relevant to professional audio, consumer audio, and digital-audio equipment designs that require transparent handling of digital audio streams. Its 96 kHz designation identifies the intended digital audio operating class, while the combination of AES3 and serial audio connections allows the device to sit between source and destination interfaces. The 4-wire control port also supports configuration and status monitoring by a host microcontroller. When designing a board around the CS8427-CS, verify the exact pin function, supply requirements, clock topology, and control-port implementation against the manufacturer datasheet before layout release. The verified distributor result confirms the 28-SOIC package, but the supplied snippets do not expose a complete pin table, so individual pin assignments should be taken directly from the CS8427 datasheet rather than inferred from the package designation. This page combines verified distributor and manufacturer-datasheet references, same-family replacement data, package information, and practical selection guidance. It is intended to help engineers identify the correct CS8427-CS ordering code and assess whether a same-family CS8427 variant is appropriate for a production redesign.
CS8427-CSR - 96 kHz Stereo Digital Audio Transceiver | Cirrus Logic (Tape & Reel)
The Cirrus Logic CS8427-CSR is a 96 kHz stereo digital audio interface transceiver with AES3 and serial digital audio inputs, AES3 and serial digital audio outputs, and comprehensive control through a 4-wire microcontroller port. It is identified in distributor data as a one-channel audio transceiver in a 28-pin SOIC package, making it suitable for digital audio routing, format conversion, and embedded audio systems. A digital audio transceiver is an interface IC that accepts digital audio signals, manages the associated clock and control information, and provides corresponding digital outputs. In the broader signal-chain hierarchy, the CS8427-CSR belongs to the digital audio interface family within audio and communications ICs, rather than to analog amplifiers or conventional power-management devices. The verified manufacturer information identifies AES3 inputs and outputs, serial digital audio input and output paths, and a 4-wire microcontroller control interface. The control port supports communication with an external controller, while the digital audio paths provide the core conversion and routing function. The CS8427 family is documented in 28-pin SOIC and TSSOP packages, with commercial and automotive temperature-grade variants listed in the manufacturer datasheet listing. The CS8427-CSR is particularly relevant to professional audio, consumer audio, and digital-audio equipment designs that require transparent handling of digital audio streams. Its 96 kHz designation identifies the intended digital audio operating class, while the combination of AES3 and serial audio connections allows the device to sit between source and destination interfaces. The 4-wire control port also supports configuration and status monitoring by a host microcontroller. When designing a board around the CS8427-CSR, verify the exact pin function, supply requirements, clock topology, and control-port implementation against the manufacturer datasheet before layout release. The verified distributor result confirms the 28-SOIC package, but the supplied snippets do not expose a complete pin table, so individual pin assignments should be taken directly from the CS8427 datasheet rather than inferred from the package designation. This page combines verified distributor and manufacturer-datasheet references, same-family replacement data, package information, and practical selection guidance. It is intended to help engineers identify the correct CS8427-CSR ordering code and assess whether a same-family CS8427 variant is appropriate for a production redesign.
CS8427-DZZ 96kHz Digital Audio Transceiver | Cirrus Logic
Cirrus Logic CS8427-DZZ is a 96 kHz digital audio interface transceiver with two audio channels, available in a 28-pin TSSOP surface-mount package. The device is intended for digital audio signal routing and interface conversion between compatible audio systems. Its 28-pin TSSOP format supports integration into compact digital audio equipment, while the manufacturer identifies the CS8427 family as available in commercial and automotive temperature grades. The commercial grade operates from -10°C to +70°C, and the automotive grade operates from -40°C to +85°C. A digital audio interface transceiver is an interface IC that receives and transmits digital audio signals between system components. In the broader electronics hierarchy, it belongs to the audio interface IC family, which sits within interface ICs, integrated circuits, and semiconductor signal-processing devices. The CS8427 supports digital audio designs requiring a 96 kHz operating rate and provides a defined approach to transferring two-channel digital audio information across a circuit board or between digital audio subsystems. The CS8427-DZZ is identified by the DigiKey product listing as an Audio Special Purpose audio transceiver with two channels in a 28-pin TSSOP package. The manufacturer datasheet excerpt identifies the CS8427 as a 96 kHz digital audio interface transceiver and confirms that the family is offered in 28-pin SOIC and TSSOP packages. The DZZ ordering code is associated with the 28-pin TSSOP option, while the related automotive and packaging variants should be selected according to the required temperature grade and shipment method. Typical applications include digital audio equipment, musical instruments, consumer audio systems, and professional audio products. The transceiver role is especially relevant where a system must move digital audio information between a source, processing chain, and destination while maintaining a defined sample-rate domain. Its 28-pin TSSOP package provides a practical surface-mount option for designs using fine-pitch assembly methods. When designing around the CS8427-DZZ, use the manufacturer pin-description table to assign every signal and supply connection. Decoupling, grounding, signal routing, and unused-pin treatment must follow the recommended application circuit because digital audio interfaces can be sensitive to return-path discontinuities and clock-related noise. Confirm the exact interface voltage levels, supported audio formats, master-clock requirements, and control configuration against the manufacturer datasheet for the target system. This page combines manufacturer-family information, distributor identification, package details, engineering guidance, and structured component data to support faster design review. It also distinguishes the exact CS8427-DZZ order code from related packaging and temperature options and explains where a direct, same-footprint replacement should be verified before design release.
ISD17240SYI - 240s Multi-Message Voice Record/Playback IC | Nuvoton
The Nuvoton ISD17240SYI is a single-chip, multi-message voice record and playback IC providing 160 to 480 seconds of audio storage with 4 kHz/5.3 kHz/6.4 kHz/8 kHz selectable sampling rates, housed in a 28-pin SOIC package rated for industrial temperature operation. A multi-message voice record and playback IC (often abbreviated "voice recorder IC" or "ChipCorder") is a self-contained digital audio subsystem that integrates non-volatile storage, an analog microphone preamplifier with Automatic Gain Control, an anti-aliasing filter, a sigma-delta codec, smoothing output filter, and a Class-D-compatible PWM/speaker driver on a single silicon die. In the broader component taxonomy, the ISD1700 family belongs to the audio processor / audio DSP IC category, which itself sits under interface ICs and signal-chain semiconductors used in embedded systems. Because storage is on-chip (no external SPI/I2C EEPROM required), designers eliminate BOM cost and PCB area. Key features include 2.4 V to 5.5 V single-supply operation, on-chip 160 kΩ microphone bias resistor, pushbutton and SPI control interfaces, selectable sampling rates, and message management that supports up to 8 segments. The device supports both standalone pushbutton operation (no MCU required) and SPI-driven operation for microcontroller-managed playback sequencing. Power-down current is sub-microamp, enabling battery-friendly operation in always-on voice prompt designs. The ISD17240SYI uses Nuvoton's proprietary zero-power-on multilevel storage technology, which stores audio samples directly in on-chip non-volatile cells rather than converting to a compressed digital stream. This eliminates codec delay and provides instant-on playback in less than 25 ms from trigger, with no software audio stack. The architecture trades bit-depth and noise floor for ultra-low quiescent power and BOM simplification. Typical applications include industrial voice prompt modules, elevator floor announcers, security alarm voice warnings, medical device audio prompts, vending machine announcements, and consumer appliance voice feedback. The wide 2.4 V to 5.5 V supply range lets the same part serve 3.3 V MCU rails or 5 V industrial buses. When designing with this device, include a decoupling capacitor of at least 0.1 µF directly across VCC and VSSA pins placed within 5 mm, route the analog ground (VSSA) separately back to the regulator, and ensure speaker traces are short and balanced to minimize click/pop artifacts on playback start. This page synthesizes distributor pricing, pin-compatible Nuvoton alternatives in the ISD1700 family, and practical design notes not consolidated in the manufacturer datasheet alone.
MAX98090AEWJ+T Ultra-Low-Power Stereo Audio Codec | ADI
The Analog Devices MAX98090AEWJ+T is an ultra-low-power stereo audio codec with a 24-bit I2S interface, six configurable input pins, and integrated audio signal processing, packaged in a 49-WLP measuring 3.15 mm by 3.15 mm. The device combines microphone, line, headphone, and speaker signal-path functions in a compact package for portable audio equipment. According to the manufacturer product page, its high-performance, low-power design and flexible input scheme make it suitable for portable applications. An audio codec is an integrated signal-processing semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. The MAX98090 belongs to the broader codec hierarchy: audio codec → mixed-signal interface IC → digital and analog signal conversion → portable audio electronics. Its integrated architecture can reduce the number of external components needed for a compact audio subsystem while supporting configurable analog and digital microphone inputs. The MAX98090 provides a 24-bit audio interface and an I2S-oriented digital audio connection, while its six input pins can be configured for analog or digital microphones, differential or single-ended line inputs, or full-scale differential inputs. The manufacturer identifies the MAX98090 as an ultra-low-power stereo audio codec designed for portable systems. Its WLP package provides a small physical footprint, but the package requires careful PCB layout, exposed-pad thermal management, and assembly controls. Typical signal paths include digital microphones feeding an I2S-compatible processor, analog microphone or line sources feeding the codec inputs, and headphone or speaker-related audio functions. The flexible input configuration allows one codec family to address portable recording, communication, and multimedia designs. The exact input sensitivity, sample-rate limits, headphone-output capability, and speaker-output current should be confirmed from the manufacturer datasheet for the final application. The main design consideration is ensuring that microphone and line inputs are correctly configured, bypassed, and referenced. I2S clocking, digital microphone power sequencing, analog grounding, and WLP assembly must be validated together rather than treated as independent blocks. Use the manufacturer datasheet and recommended application information for the complete pin mapping, electrical limits, and PCB land pattern. This product page synthesizes verified manufacturer descriptions, distributor availability, package information, pricing references, and practical design guidance. Because the supplied data does not include a complete verified pin table or all electrical limits, missing values are explicitly marked rather than inferred. Engineers should consult the Analog Devices MAX98090 datasheet before finalizing a high-volume or safety-critical portable-audio design.
MC145481DW - 6-Bit PCM Codec-Filter | NXP | 20-SOIC
The NXP MC145481DW is a general-purpose, single-channel PCM codec-filter with a 6-bit parallel PCM interface, 1 ADC, 1 DAC, and pin-selectable Mu-Law or A-Law companding. The device is offered in a 20-pin SOIC package and performs voice digitization, reconstruction, band limiting, and smoothing within PCM telecommunications systems. A PCM codec-filter is an interface integrated circuit that converts between analog voice signals and digital PCM streams while also performing the filtering needed to limit signal bandwidth and reconstruct smooth analog audio. Its position in the hierarchy is PCM codec-filter > voice codec > audio interface IC > integrated circuit, where it links microphone or line-level analog circuitry to a digital telephony or transmission system. Key features include a 6-bit PCM resolution, one analog-to-digital converter and one digital-to-analog converter, selectable A-Law or Mu-Law companding, and support for Short Frame Sync, Long Frame Sync, IDL, and GCI timing formats. An active RC filter preceding the switched-capacitor encoder filter suppresses very high-frequency noise before modulation, while the codec architecture maintains compatibility with related Motorola and NXP PCM interface devices. The MC145481 uses switched-capacitor filtering rather than a conventional continuously filtered signal path. This approach integrates the encoder and decoder filter functions more efficiently, although external bypass, timing, and impedance details still determine practical signal-chain performance. The 20-pin SOIC package also requires careful layout to separate analog input and output paths from PCM clock and data lines. Typical uses include digital telephone handsets, voice-processing modules, PCM channel equipment, line-card audio paths, and legacy telecommunications interfaces. These systems benefit from the device's combination of conversion, companding, clock-format flexibility, and filtering in one package, reducing the number of discrete analog filter and codec stages required. When designing the circuit, verify the exact clock mode, frame-sync polarity, and companding configuration against the manufacturer datasheet before routing signals. Place the analog input network close to the ADC pins, keep the PCM interface traces short, and provide the specified bypass capacitance at the supply pins. This page also organizes replacement options, design cautions, and application guidance around this legacy interface IC.
MC145483DT - 13-Bit PCM Codec-Filter | NXP Semiconductors
The NXP Semiconductors MC145483DT is a 13-bit linear PCM codec-filter with one ADC and one DAC, designed for voice digitization and reconstruction in digital communication equipment. It operates from a recommended 2.7V to 5.5V supply, can operate down to 2.3V with reduced performance, and is packaged in a 20-pin TSSOP. The codec uses 2s-complement PCM data and supports synchronous operation for deterministic digital audio interfaces. A PCM codec-filter is an interface IC that combines analog-to-digital conversion, digital-to-analog conversion, and signal filtering. In the electronic hierarchy, it belongs to the audio codec family, connects analog voice signals to digital processing systems, and ultimately supports communication equipment such as voice terminals, telephony interfaces, and embedded audio systems. Its integrated filter stages reduce the external circuitry needed for voice-band digitization and reconstruction. The MC145483DT provides a 13-bit conversion resolution, one analog input path, one analog output path, and 2s-complement PCM data formatting. The manufacturer datasheet describes the device in 20-pin SOG, SSOP, and TSSOP packages, with the MC145483DT ordered as a 20-pin TSSOP implementation. These characteristics make the device particularly relevant to designs requiring compact voice-band conversion rather than a full-featured multimedia audio codec. The device performs voice digitization, reconstruction, band limiting, and smoothing within one integrated package. Its recommended 2.7V to 5.5V operating range supports both 3.3V and 5V system rails. Operation down to 2.3V is possible with reduced performance, which can be useful in low-voltage designs after signal-quality and timing requirements have been checked against the manufacturer datasheet. Typical applications include digital telephone equipment, voice communication terminals, speech-processing systems, industrial voice interfaces, and embedded audio subsystems. In these systems, the MC145483DT converts an analog voice signal into PCM data for transmission or processing and reconstructs a filtered analog voice output from PCM data received from a digital channel. A host processor or communications controller supplies the required clock and serial interface signals. Designers should verify the device pinout, interface timing, analog impedance, and external filtering requirements in the manufacturer datasheet before PCB release. The 20-pin TSSOP footprint requires careful routing of analog and digital signals, short return paths, and stable supply bypassing. Because the MC145483DT is an older catalog component, procurement planning should also confirm lifecycle status and manufacturing availability before committing to a new production design. This page combines the MC145483DT's principal electrical characteristics, package information, sourcing guidance, and verified replacement analysis with practical PCB and integration guidance. It distinguishes a documented drop-in sourcing option from package variants that cannot be substituted without redesigning the PCB.
MC145483DW - 3V 13-Bit PCM Codec-Filter | NXP
The NXP MC145483DW is a 3 V, 13-bit linear PCM codec-filter with one ADC and one DAC, housed in a 20-pin SOIC package. It uses a 2s-complement data format and combines voice digitization, voice reconstruction, band-limiting, and smoothing for digital communication systems. The device supports synchronous operation, making it suitable for systems that require the analog voice path and PCM processing to share a common clock. A PCM codec-filter is an audio interface integrated circuit that converts an analog voice signal into a linear PCM digital stream and reconstructs an analog voice signal from a digital stream. In the broader component hierarchy, it belongs to the audio codec family within interface ICs and power-management-dependent signal-chain devices. Its combined conversion and filtering functions reduce the number of separate blocks needed in a voice terminal or telecommunications design. The principal specifications are 13-bit conversion resolution, a 3 V supply, one ADC channel, one DAC channel, and a 20-pin SOIC package. The 2s-complement PCM format provides a standard representation for digital audio processing. Because the codec-filter integrates the required smoothing and band-limiting functions, designers can use it as the central analog-to-digital and digital-to-analog conversion element in compact voice-processing equipment. The MC145483 family is intended to operate in synchronous digital communication systems. Its linear PCM interface supports direct integration with a digital signal processor, controller, or other PCM-compatible logic. The 20-pin surface-mount package permits conventional automated assembly and board-level density, although the narrow logic spacing requires careful routing between the digital interface, analog signal path, supply pins, and ground return. Typical applications include digital telephone terminals, voice-band communications equipment, speech-processing systems, answering machines, and embedded voice interfaces. The codec-filter is especially appropriate when a design needs a defined PCM stream, integrated reconstruction filtering, and a compact interface between analog microphones or speakers and synchronous digital logic. For implementation, follow the manufacturer pin-description and typical-application tables when assigning analog inputs, outputs, clock signals, and control connections. Keep analog and digital return currents separated where practical, place bypass capacitors close to the supply pins, and route clock and data traces away from sensitive analog inputs. These practices reduce noise coupling in the voice signal path. This page combines device specifications, lifecycle information, package guidance, application analysis, and verified cross-reference research to support component selection and board-level implementation. The 13-bit PCM resolution and integrated filtering make MC145483DW a specialized choice for voice-band designs rather than a general-purpose high-fidelity audio converter.
MC145483EJ - 13-Bit PCM Codec Filter Interface | NXP
The NXP MC145483EJ is a single-channel 13-bit linear PCM codec-filter with one ADC and one DAC, a 2s-complement data format, and a 20-pin TSSOP package. Designed for 3 V audio and voice interfaces, it combines analog-to-digital conversion, digital-to-analog conversion, and filtering in one compact integrated circuit. The MC145483EJ also appears in Freescale Semiconductor catalog listings because Freescale became part of NXP Semiconductors. A PCM codec-filter is an interface IC that converts analog audio into digital PCM samples and reconstructs analog audio from digital PCM data. In the signal-chain hierarchy, the MC145483EJ belongs to the codec family within audio interface ICs, which sit between analog transducers and digital audio processors. Its integrated filtering reduces the number of separate components required in compact telephony, voice-capture, and audio-recording designs. Key characteristics include 13-bit resolution, one ADC channel, one DAC channel, 2s-complement PCM data, operation from a 3 V supply, and a 20-pin TSSOP package. The manufacturer documentation also identifies SOG, SSOP, and 32-pin QFN package options for the same codec-filter family. This availability in several package styles makes the MC145483EJ relevant to designs requiring different board-area or assembly constraints. The device is intended for linear PCM audio-interface applications where a compact mixed-signal codec is more appropriate than a general-purpose high-resolution audio converter. Its 13-bit data width places it in the voice and speech-capture class rather than the highest-fidelity music-recording class. Designers should use the pin-description and connection tables in the manufacturer datasheet to connect the analog inputs, analog output, digital PCM interface, clock signals, and supply pins correctly. Typical uses include digital telephone handsets, voice-recording equipment, speech-processing terminals, industrial voice panels, and compact audio-capture modules. Because the MC145483EJ integrates the codec and filter functions, it can simplify board partitioning when the source signal is a single voice channel and the destination is a parallel PCM processor. Careful clock and analog-layout planning is essential in a working design. Keep the analog input and output paths short, decouple the supply pins as shown in the manufacturer application guidance, and route digital clock and data lines away from sensitive analog nodes. Confirm the master-clock relationship, data timing, and external filter requirements against the manufacturer datasheet before releasing PCB artwork. This page combines the exact catalog specifications, package and interface details, application guidance, comparison fields, and engineering notes needed to evaluate the MC145483EJ for a new PCB revision. It also identifies where a separate engineering review is required before substituting a codec with different clocking or filter characteristics.
MC145483EN - 13-Bit PCM Audio Codec | Freescale | SSOP-20
Freescale MC145483EN is a 13-bit linear PCM codec-filter with one ADC and one DAC, operating from a 3 V supply and packaged in a 20-pin SSOP. The device uses a 2s-complement PCM data format and provides analog-to-digital and digital-to-analog signal conversion for one-channel audio and telecom signal paths. A PCM codec-filter is an interface IC that converts analog audio signals into digital PCM samples and reconstructs analog signals from digital PCM data. Its place in the broader signal-chain hierarchy is codec-filter → audio interface IC → interface integrated circuit → semiconductor. The MC145483EN is intended for compact telephony, voice-processing, and embedded audio designs where a single conversion channel and 13-bit resolution provide an economical balance between fidelity and implementation complexity. The principal features of the MC145483EN include a 13-bit conversion resolution, one ADC channel, one DAC channel, 3 V operation, and a 20-pin SSOP package. The manufacturer describes the device as a MU-law-capable PCM codec-filter, while the family documentation identifies a linear PCM conversion format and 2s-complement data representation. These characteristics make the part appropriate for basic voice-band acquisition and playback rather than high-resolution multichannel audio. The MC145483EN integrates the digital conversion interface and filtering functions needed to move one audio channel between analog circuitry and a PCM processor. Digital data is transferred through the codec's PCM interface, while the analog side interfaces with external line or voice-band circuitry. Exact clocking, timing, input bandwidth, output loading, and codec-control details should be taken from the pin-description and timing tables in the manufacturer datasheet before the device is placed in a new design. Typical uses include one-channel voice terminals, telecommunications interfaces, industrial voice-capture modules, and embedded audio subsystems with modest resolution requirements. It can also support low-cost PCM test equipment when the system needs only one ADC path, one DAC path, and 13-bit data. For stereo or multichannel systems, several codec channels or a higher-channel-count codec would be required. Designers should verify the exact SSOP-20 footprint, exposed-pad arrangement, power pins, analog signal levels, and control timing against the manufacturer pinout before layout. Decoupling should follow the datasheet's recommended network and be placed close to the supply pins. Analog and digital return paths should be arranged to minimize codec clock and PCM data coupling into the analog input and output stages. This page consolidates the verified codec specifications, package information, sourcing data, related family options, and practical implementation guidance. It is intended to help engineers quickly determine whether the MC145483EN's one-channel, 13-bit, 3 V PCM architecture matches a voice or basic audio design before beginning detailed schematic and PCB work.
MC145483FC - 13-Bit PCM Codec-Filter | NXP | Audio Interface
The NXP MC145483FC is a 13-bit linear PCM codec-filter with one ADC, one DAC, and 2s-complement PCM data, packaged in a 32-pin HVQFN (5 x 5 mm) with an exposed pad. It operates from a 3 V supply and is specified for an industrial temperature range of -40°C to 85°C. The device is designed for single-channel digital-audio conversion where compact implementation, direct PCM connectivity, and a low-pin-count surface-mount package are important. A PCM codec-filter is a semiconductor that converts between analog audio and linear pulse-code-modulation samples. The MC145483FC belongs to the broader codec and filter hierarchy, which falls under audio interface integrated circuits and, more generally, interface semiconductors. Its ADC accepts an analog audio input, while its DAC reconstructs an analog output from digital PCM data. The 13-bit linear format gives 4096 amplitude steps in each coded direction and represents audio using two's-complement samples. The codec-filter architecture integrates signal-path conversion functions needed to connect an analog audio source or destination to a digital audio system. The MC145483FC uses a 13-bit resolution and supports the 3 V supply identified for the component. Its 32-terminal HVQFN package reduces board area compared with many older leaded or narrow-outline codec packages, while the exposed thermal pad improves heat transfer through the PCB. The package is suitable for surface-mount assembly and industrial-temperature equipment. The principal engineering benefit is a dedicated single-channel conversion solution rather than a general-purpose codec with many configurable functions. This can simplify firmware, reduce analog routing, and preserve a direct PCM interface in equipment such as telephony terminals, industrial audio modules, and embedded voice systems. Designers should still validate signal levels, clocking, data format, and power sequencing against the manufacturer's application guidance before releasing a PCB. Typical uses include single-channel voice processing, digital audio interface modules, compact industrial controllers, and telecommunications equipment. The industrial temperature rating makes the device suitable for applications with controlled but non-consumer operating environments. A system requiring stereo conversion, multiple codec channels, or a modern high-resolution digital audio interface will generally need a different codec architecture. Layout is critical because the exposed pad must be connected to the appropriate supply or ground plane as specified in the manufacturer datasheet. Place required bypass capacitors close to their associated pins, keep analog and digital return currents controlled, and route high-current digital and clock traces away from the analog input and output nodes. Use the package land pattern and exposed-pad geometry from the manufacturer drawing rather than estimating solder-land dimensions. This page combines the device's 13-bit PCM architecture, 1/1 ADC-DAC configuration, 3 V operation, industrial temperature range, package details, practical replacement guidance, and PCB implementation considerations. It also distinguishes documented compatibility from generic codec substitutions, helping engineers determine whether a candidate preserves the footprint, pin functions, and signal interface before committing to a redesign.
MC145483SD - 13-Bit PCM Codec-Filter | NXP Semiconductors
The NXP Semiconductors MC145483SD is a 13-bit linear PCM codec-filter with one ADC, one DAC, and 2s-complement data handling, packaged in a 20-pin SSOP. The device combines an analog-to-digital converter, digital-to-analog converter, and filtering functions in a single integrated circuit. Its package is a rectangular, gull-wing surface-mount SSOP with 20 terminals. A PCM codec-filter is an interface IC that converts analog audio signals into digital PCM data and converts digital PCM data back into an analog audio signal. In the broader electronics hierarchy, the MC145483SD belongs to the audio codec class within interface ICs and supports systems built around digital audio transmission, storage, or signal processing. The 2s-complement format provides a standardized signed digital representation for processor input and output. The defining feature of the MC145483SD is its 13-bit resolution. Its matched ADC and DAC paths provide a compact one-channel conversion solution for equipment requiring an integrated PCM audio interface. The 20-pin SSOP package also makes the device suitable for leaded-surface-mount assembly rather than through-hole insertion. Because the available product information does not state the complete electrical limits, engineers should use the manufacturer pin-description table and electrical-characteristics tables before finalizing a new design. The MC145483SD is associated with the Motorola MC145483 codec-filter family and is listed by NXP Semiconductors as a PCM codec/filter with a 13-bit resolution. Its integrated 1-ADC/1-DAC arrangement reduces the number of separate conversion components required in a single-channel audio path. It also places the PCM conversion and filtering functions close together, which can simplify signal routing in compact voice, communications, and embedded audio systems. Typical applications include digital voice processing, communications equipment, audio interface modules, and embedded systems that exchange one-channel PCM audio with a digital processor. The part can be paired with a host controller that supports the required PCM timing and data format. In such systems, the analog input and output paths are filtered by the codec-filter while the digital side exchanges 13-bit 2s-complement samples. A critical design consideration is verifying the analog supply, digital supply, clocking, and control-signal requirements against the manufacturer datasheet before layout is released. PCB designers should preserve the recommended decoupling and analog grounding arrangement and route timing-sensitive digital signals away from sensitive audio traces. Component substitutions should not be assumed to be drop-in replacements unless package, pinout, clocking, data format, and electrical limits have been independently verified. This product page combines the identified device attributes, package information, sourcing references, engineering application guidance, and a conservative replacement assessment. It is intended to help engineers distinguish verified facts from parameters that still require confirmation from the original manufacturer documentation.
MC145484DT - 13-Bit PCM Codec-Filter | NXP | 5 V
The NXP MC145484DT is a single-channel, 13-bit PCM codec-filter operating from a 5 V supply in a 20-pin TSSOP package. It combines a 1-bit ADC, a 1-bit DAC, and the filtering functions required for voice digitization, reconstruction, band limiting, and output smoothing. Pin-selectable Mu-Law or A-Law companding provides compatibility with North American and international digital telephony formats. A PCM codec-filter is a communications interface circuit that converts between analog voice signals and serialized PCM digital data. The codec performs sampling and digital-to-analog or analog-to-digital conversion, while the integrated filter removes unwanted frequency components and shapes the voice channel. Within the broader hierarchy, the MC145484DT is an interface IC, audio codec, PCM codec-filter, and telecommunications signal-processing device. The MC145484DT provides 13-bit resolution and one ADC channel with one DAC channel. Its 5 V supply operation suits established telecommunications and voice-processing equipment. Mu-Law and A-Law companding can be selected by pin, allowing the same hardware design to support two major PCM companding conventions. The device can operate in synchronous or asynchronous PCM systems, providing flexibility when the transmitted clock and framing arrangement differ between host equipment. The 20-pin TSSOP package places the analog, digital, clock, control, and power connections in a compact surface-mount format. Its signal path includes voice digitization and reconstruction together with the band-limiting and smoothing functions associated with a PCM codec-filter. The compact package does not imply that external analog filtering or system-level voice-channel calibration can be omitted; those requirements should be evaluated from the manufacturer application guidance for the complete voice path. Typical uses include digital telephone interfaces, voice-channel processing in telecommunications equipment, PCM transmission and reception systems, and legacy telephony designs requiring selectable Mu-Law or A-Law operation. The same general-purpose architecture is useful where analog voice must be converted into a serial PCM stream or reconstructed from a received stream. Synchronous operation can suit systems with a common reference clock, while asynchronous operation supports arrangements in which transmit and receive clocks are not continuously aligned. Designers should treat power, clocking, and analog grounding as separate implementation concerns. The 5 V supply must remain within the manufacturer’s specified operating limits, the PCM data and clock signals must meet interface timing requirements, and analog input and output routing should minimize coupling from digital switching activity. The pin-description table, recommended application circuit, and timing diagrams in the manufacturer datasheet should be used when assigning PCB tracks and validating signal integrity. This product page combines the manufacturer’s PCM codec-filter description with package, resolution, channel-count, companding, interface, and ordering information. It also organizes replacement-search results and engineering guidance so that engineers can evaluate the MC145484DT as a legacy 20-pin TSSOP voice-interface device before committing a board layout or production order.
MC145484DW - 13-Bit 5V PCM Codec-Filter | NXP
The NXP Semiconductors MC145484DW is a 13-bit, 5 V PCM codec-filter for per-channel voice digitization and reconstruction, with pin-selectable Mu-Law or A-Law companding in a 20-pin SOIC package. It combines pulse-code modulation encoding or decoding, band limiting, and smoothing functions required by PCM telecommunications systems. A PCM codec-filter is a voice-processing integrated circuit that converts between analog speech signals and digital PCM data. Its place in the signal chain is between the audio input or output circuitry and a digital communications system. The codec-filter block provides the analog-to-digital or digital-to-analog conversion functions, while the companding circuitry supports the two commonly used logarithmic voice formats: Mu-Law and A-Law. The MC145484 provides a 13-bit PCM interface, operates from a 5 V supply, and supports pin-selectable Mu-Law or A-Law operation. According to the NXP manufacturer datasheet, it performs voice digitization and reconstruction together with the band-limiting and smoothing required by PCM systems. The device can operate in synchronous or asynchronous system configurations, giving it flexibility in telephony, voice-processing, and embedded communications equipment. Because companding is selected by pins rather than an internal programming interface, the device is suited to designs where a fixed voice format is known during hardware configuration. The 13-bit PCM resolution supports conventional voice-band processing, while the integrated filtering reduces the need for separate reconstruction smoothing networks. Its 20-pin SOIC package is suitable for conventional surface-mount assembly and legacy voice-interface designs. Typical uses include PCM voice codecs in telephony equipment, speech-processing modules, digital telephone interfaces, and communications systems that transmit or reconstruct companded voice. The MC145484 is particularly appropriate when the system requires a dedicated PCM codec-filter with selectable Mu-Law or A-Law companding rather than a general-purpose modern audio codec. Designers should confirm clocking mode, pin levels, analog input and output requirements, and external filtering against the manufacturer datasheet before layout. Decoupling and analog signal routing are especially important because codec performance can be affected by supply noise, clock jitter, and unwanted coupling from digital switching signals. Stable power and short analog traces are therefore preferable to long PCB routes around the device. This product page combines the manufacturer function description, package and interface details, verified lifecycle context, and engineering guidance for selecting and implementing the MC145484DW. It also distinguishes documented drop-in replacements from merely similar codecs so that board-level replacement decisions are based on package, pin compatibility, and functional equivalence rather than broad device similarity.
MC145484EJ - 5V 13-Bit PCM Codec-Filter | NXP | Audio Interface
NXP Semiconductors MC145484EJ is a 5 V PCM codec-filter for digital audio interfaces, with a 13-bit PCM audio interface and selectable Mu-Law or A-Law companding. The device is packaged in a 20-pin TSSOP. It accepts serial PCM data, performs the required companding and filtering functions, and supports general-purpose per-channel PCM audio signal processing. A PCM codec-filter is an interface IC positioned between a digital audio data source and a telephone, communications, or audio-processing circuit. PCM represents sampled audio as binary words, while companding reduces word length by applying logarithmic encoding to improve signal-to-noise performance. The MC145484EJ therefore belongs to the broader hierarchy of audio interface IC, interface IC, signal-processing IC, and semiconductor. Key features include a 13-bit PCM interface, 5 V supply operation, selectable Mu-Law or A-Law companding, and a compact 20-pin TSSOP package. These characteristics suit designs that require a dedicated PCM-to-analog or digital audio channel conversion stage rather than a general-purpose audio codec. The TSSOP package also supports surface-mount assembly and provides a practical upgrade path for designs using larger through-hole packages. The MC145484EJ is intended for per-channel PCM codec-filter applications. Its companding selection supports compatibility with North American Mu-Law and international A-Law telecommunications conventions, while the serial PCM interface allows connection to digital audio buses and channel-processing equipment. Clocking, data-format, and timing details should be taken directly from the manufacturer datasheet when laying out the interface. Typical uses include digital telephone interfaces, voice-processing modules, communications equipment, sound cards, and legacy PCM audio subsystems. In each case, the MC145484EJ provides a focused conversion function and reduces the component count compared with a discrete implementation of the corresponding companding and filtering functions. PCB implementation requires careful signal routing and stable supply bypassing. Place the device close to the supported digital audio source, maintain short traces on clock and data nets, and avoid routing high-current or switching-supply paths beside sensitive audio signals. Confirm the package dimensions, pin assignments, and timing requirements against the manufacturer datasheet before releasing artwork. This product page combines device classification, sourcing guidance, engineering considerations, and a structured comparison framework. It also distinguishes verified drop-in replacements from package or functionally similar parts that require PCB changes, helping engineers evaluate interchangeability before committing a design.
MC145506P 22-DIP PCM Codec-Filter Mono-Circuit | Motorola
Motorola MC145506P is a mono PCM codec-filter integrated circuit designed for voice digitization, reconstruction, band limiting, and signal smoothing in PCM communication systems. The device provides a 13-bit PCM interface and is packaged in a 22-pin DIP. Its integrated codec-filter architecture reduces the number of separate discrete functions required around a voice-processing signal chain. A PCM codec-filter is a specialized interface IC that belongs to the broader class of audio codecs and PCM interface devices. In a telephone or telecommunications system, a PCM interface converts between analog voice signals and digital pulse-code-modulated streams. Codec-filter circuits also perform the band-limiting and smoothing needed to prepare signals for transmission or reconstruction at the receiving end. The MC145506 family combines voice digitization and reconstruction with integrated filtering functions. According to the manufacturer datasheet, the MC145506, MC145507, and MC145508 are per-channel codec-filter PCM mono-circuits. This family positioning makes the MC145506P useful in designs that require a dedicated mono PCM channel rather than a multichannel audio codec with a substantially different control and data interface. The MC145506P exposes a 13-bit PCM data path, making bit allocation an important system-level consideration. Designers should determine whether the host channel expects 13-bit linear PCM, determine the required clock and framing arrangement from the datasheet, and account for any sign-extension or scaling performed elsewhere in the system. These interface details are more important than simply matching a generic codec description because incompatible framing or timing can prevent correct operation despite similar audio functionality. Typical applications include mono voice transmit and receive paths in telecommunications equipment, digital telephone interfaces, speech-processing systems, and PCM-based audio links. In each case, the device can combine conversion and filtering functions while reducing the number of external signal-conditioning blocks. Its mono-circuit architecture is particularly appropriate when each conversation channel is handled independently. The primary design consideration is PCB footprint compatibility. The MC145506P uses a 22-pin DIP rather than a modern surface-mount package, so it requires through-hole routing and is generally less compact than newer PCM codec implementations. Confirm pin assignments, supply requirements, clocking, analog interfaces, and timing values against the manufacturer datasheet before laying out a new board or adapting an existing design. This product record combines the manufacturer datasheet identity, distributor catalog details, package information, application guidance, and an explicit comparison of what is known about this legacy PCM interface with what requires circuit-level verification. It is intended to help engineers identify the correct function, package, and application before requesting sourcing information for an assembled board.
MC145554P - 13-Bit PCM Codec-Filter | Motorola | Voice
The Motorola MC145554P is a 13-bit PCM codec-filter integrated circuit housed in a 16-pin plastic dual inline package. It combines PCM voice digitization and reconstruction with the band-limiting and smoothing functions required by PCM communication systems. Its principal function is to convert analog voice signals into digital PCM data and reconstruct analog audio from received PCM data. A PCM codec-filter belongs to the audio codec and interface hierarchy, where it bridges linear analog audio and digital PCM telecommunications. The codec-filter concept combines signal conversion with frequency-domain filtering in one interface circuit. In a voice system, this integration can reduce the number of separate external filtering stages required around a codec while supporting the bandwidth and smoothing requirements associated with voice transmission. The MC145554 family is designed for per-channel PCM signal processing. The MC145554P identifies the 16-pin plastic DIP configuration, while the 13-bit PCM interface resolution is listed for the exact MC145554P orderable device. Its primary engineering benefit is functional consolidation: analog-to-digital conversion, digital-to-analog reconstruction, band limiting, and smoothing are combined within a single voice-channel interface. The codec-filter family operates with synchronous and asynchronous PCM systems. That flexibility makes the device relevant to telecommunications, voice processing, digital telephony, and embedded audio interfaces where the system clock arrangement differs between endpoints. Designers must still verify clocking, impedance, timing, and analog-interface requirements against the manufacturer datasheet before laying out a new circuit. Typical applications include PCM voice terminals, digital telephone interfaces, speech-processing equipment, voice-band recorders, and telecommunications line-card signal paths. In these systems, the MC145554P provides the conversion boundary between an analog microphone or speaker path and a digital PCM processor. It is especially relevant when a compact single-channel implementation is preferable to separate codec and filter circuitry. A key design consideration is that this is a legacy 16-pin DIP device rather than a modern mixed-signal package. PCB space, assembly method, analog grounding, clock cleanliness, and connector-level signal integrity therefore deserve attention. Reproduction of an existing design should preserve the original footprint, pin functions, timing assumptions, and external component values unless a validated cross-reference has been completed. This product page consolidates the confirmed device identity, PCM interface information, package details, sourcing path, and design considerations into one engineering reference. It also distinguishes documented drop-in replacements from merely similar legacy codec-filter devices, helping engineers determine when PCB reuse is defensible and when a fresh design should use a newer codec architecture.