بەرهەمەکان (5,100+)

PCM3006T - 16-Bit Stereo Audio Codec | Texas Instruments
PCM3006T

PCM3006T - 16-Bit Stereo Audio Codec | Texas Instruments

Texas Instruments PCM3006T is a low-cost, single-chip stereo audio codec with 16-bit resolution, single-ended analog inputs and outputs, and a 24-SSOP package. The codec combines analog-to-digital and digital-to-analog conversion functions on one device, reducing the component count in stereo audio equipment. Its delta-sigma conversion architecture uses 64-times oversampling, while the ADC path includes a digital decimation filter for converting the oversampled stream into the required audio-rate data. An audio codec is a mixed-signal interface IC that bridges an analog audio system and a digital audio processor. In this product hierarchy, the PCM3006T is a stereo audio codec, which combines an ADC, DAC, analog input and output circuitry, and digital audio data interfaces. It is used where a system needs bidirectional conversion between analog audio signals and a serial digital audio bus rather than a complete USB audio interface or loudspeaker amplifier. The principal functional attributes of the PCM3006T include 16-bit stereo conversion, single-ended analog input and output, 64-times delta-sigma oversampling, and a digital decimation filter in the ADC path. These features make it suitable for compact stereo audio products in which an existing digital audio engine must interface directly with analog microphones, line-level circuitry, speakers, or other analog audio stages. The integrated codec architecture also helps reduce board area compared with separate ADC and DAC devices. The 24-SSOP package is intended for surface-mount assembly and provides a compact implementation for audio equipment. Because the codec performs both conversion directions, board layout should keep the analog input, analog output, digital interface, and supply connections arranged to minimize coupling between sensitive audio nodes and high-speed digital signals. External analog filtering, grounding, and supply-decoupling decisions remain part of the complete signal-chain design rather than being determined solely by the codec specifications. Typical applications include stereo sound-card analog sections, portable audio products, digital mixing consoles, audio-recording interfaces, speaker and headphone subsystems, and embedded equipment that already has a separate USB or digital audio controller. The PCM3006T is particularly appropriate where single-ended analog connections are acceptable and a 16-bit stereo serial interface is sufficient. It does not itself perform USB connectivity or drive a loudspeaker directly, so those functions require suitable companion circuitry. Designers should verify the complete pin configuration, supported digital audio format, sampling-rate range, analog signal limits, and power requirements in the manufacturer datasheet before layout release. The single-ended interface simplifies some analog routing, but it may reduce headroom or flexibility compared with a codec that offers balanced inputs and outputs. Appropriate passive networks, stable references, clean supplies, and controlled return paths remain essential for low distortion and acceptable channel matching. This product summary combines the verified 16-bit stereo codec identity, single-ended analog I/O, 64-times oversampling, digital decimation, and 24-SSOP packaging information with practical selection guidance, comparison notes, sourcing workflow, and design-focused considerations.

RFQ پەیوەندی
PCM3006T/2K - 16-Bit Stereo Audio Codec | Texas Instruments
PCM3006T/2K

PCM3006T/2K - 16-Bit Stereo Audio Codec | Texas Instruments

Texas Instruments PCM3006T/2K is a low-power stereo audio codec with 16-bit resolution, two analog-to-digital converters, two digital-to-analog converters, single-ended analog input and output, and a serial digital audio interface. The device is supplied in a 24-pin SSOP tape-and-reel package. Its integrated codec architecture supports conversion between analog stereo audio and a serial digital representation while conserving board area in audio equipment. An audio codec is a mixed-signal integrated circuit that combines ADC and DAC functions with the digital interface needed to exchange audio samples with a host processor. The PCM3006T/2K belongs to the broader hierarchy of audio codec, audio interface IC, mixed-signal semiconductor, and interface integrated circuit. Its single-ended inputs and outputs simplify connection to line-level analog circuitry without requiring balanced audio channels. Key documented characteristics include 16-bit conversion resolution, a stereo 2-ADC/2-DAC arrangement, and single-ended analog signal paths. The 24-SSOP package supports compact surface-mount layouts, while the tape-and-reel ordering option suits automated assembly. The /2K suffix identifies the specific Texas Instruments orderable configuration and should be retained when comparing replacements or issuing procurement requests. Technically, the PCM3006T/2K separates analog conversion from digital sample transport. Two ADC channels provide the digital audio data path from the analog input stage, while two DAC channels reconstruct stereo audio from digital samples received through the serial interface. This integrated arrangement reduces the number of discrete converters normally required for a stereo signal chain and keeps analog input, conversion, and output functions in one component. Typical uses include consumer audio equipment, portable media systems, digital recording products, and embedded audio subsystems in which a 16-bit stereo codec with single-ended I/O is sufficient. The part can also sit between an analog audio front end and a digital audio processor, allowing the host to perform decoding, mixing, storage, or communication while the codec handles analog-to-digital and digital-to-analog conversion. Designers should confirm the interface timing, analog signal levels, clocking, and required external support circuitry against the manufacturer datasheet before layout. Keep analog and digital return paths well controlled, place input and output capacitors near their associated pins, and route the exposed signal paths away from switching nodes. The 24-SSOP footprint is relatively narrow, so adequate escape routing and assembly clearances are important. This product summary combines the exact orderable MPN, package information, codec configuration, verified distributor listings, replacement analysis, and application-oriented engineering guidance. It is designed to help engineers identify the correct audio converter and prepare a source request without relying on ambiguous family-level descriptions.

RFQ پەیوەندی
PCM3006TG - 16-Bit Stereo Audio Codec | Texas Instruments
PCM3006TG

PCM3006TG - 16-Bit Stereo Audio Codec | Texas Instruments

Texas Instruments PCM3006TG is a 16-bit stereo audio codec that combines analog-to-digital and digital-to-analog conversion in one IC. It uses single-ended analog voltage input and output and is offered in a 24-pin SSOP/TSSOP-24 surface-mount package. The device is positioned as a low-cost integrated codec for equipment that requires compact conversion of stereo audio signals. An audio codec is an interface IC that converts between analog audio and digital audio data. Its internal ADC accepts analog voltage signals, converts them into digital samples, and transfers those samples to a digital audio processor through a digital serial interface. The internal DAC performs the reverse path, accepting digital audio data and producing a single-ended analog output. This integrated ADC/DAC arrangement reduces component count and simplifies mixed-signal board layouts compared with separate converter ICs. The PCM3006TG's principal identified characteristics are 16-bit resolution, stereo operation, single-ended analog input and output, and a 24-pin package. These features make the codec applicable to consumer audio equipment, digital recording products, and embedded audio systems where two audio channels must cross the analog-to-digital boundary. Its integrated conversion functions also allow a design to use the same codec for playback, capture, or bidirectional signal conversion when the surrounding system provides suitable clocks and digital interfaces. The PCM3006 family is described by Texas Instruments as a low-cost, single-chip stereo audio codec. Integrating both conversion directions into one package reduces board area and the number of external conversion devices. The digital side must still be connected to a processor, controller, or audio transport capable of supporting the codec's interface format and required clocking. Analog board design also requires careful grounding and layout control to prevent converter noise from coupling into either the input or output signal path. Typical uses include compact stereo playback and recording modules, multimedia appliances, USB or network audio peripherals, industrial control panels with sound capture, and consumer products with local audio output. The 16-bit format provides a defined sample width for digital audio pipelines, while the stereo architecture supports independent or paired left and right channels according to the system configuration. Designers should follow the pin-description and typical-application circuits in the Texas Instruments PCM3006 datasheet when assigning signals. Place analog and digital return paths carefully, provide local bypassing at the supply pins, and route high-speed digital traces away from sensitive analog inputs. Confirm the required master-clock, serial-data, and control connections before finalizing the PCB footprint. This product page combines the confirmed PCM3006TG characteristics with a searchable compatibility comparison and practical implementation guidance. It is intended to help engineers identify the correct codec, understand its documented architecture, and plan a robust analog and mixed-signal layout before release to manufacturing.

RFQ پەیوەندی
PCM3006TG6 - 16-Bit Stereo Audio Codec | Texas Instruments
PCM3006TG6

PCM3006TG6 - 16-Bit Stereo Audio Codec | Texas Instruments

The Texas Instruments PCM3006TG6 is a 16-bit stereo audio codec with single-ended analog input and output, a serial digital interface, and a 24-pin SSOP package. It operates from a 3 V power supply, supports a -25 °C to 85 °C operating-temperature range, and is designed for compact stereo audio signal conversion. Its single-chip integration makes it suitable for audio appliances, portable equipment, and other systems requiring both analog-to-digital and digital-to-analog conversion. An audio codec is an integrated circuit that converts between analog audio signals and a digital data stream. The PCM3006TG6 belongs to the stereo audio codec hierarchy, combining a pair of analog inputs, a pair of analog outputs, delta-sigma ADCs and DACs, digital filters, and a serial host interface. This integration reduces the number of separate converters required in an audio subsystem while retaining a defined path from microphone or line-level input to digital audio data and back to an analog output. The codec uses delta-sigma modulation with 64-times oversampling for both the ADC and DAC sections. Its ADCs include digital decimation filters, while its DACs include digital interpolation filters. The 16-bit format provides a practical balance between audio resolution, interface bandwidth, and implementation complexity for consumer and embedded stereo systems. The 24-SSOP package also has a stated seated height of 1.45 mm, supporting compact board construction. The digital connection uses a serial interface, allowing the codec to communicate with a host processor, digital audio controller, or application-specific integrated circuit. Because digital audio data is serialized, the external connection requires fewer signal conductors than a parallel interface. Clocking, data-format selection, reset behavior, and analog routing must be configured consistently with the surrounding controller to prevent framing or timing errors. Typical uses include stereo line-level processing, multimedia audio conversion, consumer audio appliances, portable equipment, and embedded systems that exchange PCM audio data with a digital processor. The single-ended analog architecture simplifies external signal conditioning compared with a differential implementation, although the application still needs suitable input and output filtering, grounding, and signal-level design. A critical implementation requirement is to follow the manufacturer datasheet reference circuit for analog, digital, and power connections. Place the required bypass capacitors close to their supply pins, keep analog and digital return paths disciplined, and treat the codec interface traces as timing-sensitive clock and data routes. Adequate analog headroom and correct input or output scaling are necessary to prevent distortion and clipping. This product page combines the Texas Instruments codec specifications with package details, sourcing guidance, application-focused design notes, and a verified same-family replacement reference. It is intended to help engineers assess the PCM3006TG6 for an existing 3 V stereo audio design before committing to a PCB or production release.

RFQ پەیوەندی
PCM3008T/2K 16-Bit Stereo Audio Codec | Texas Instruments
PCM3008T/2K

PCM3008T/2K 16-Bit Stereo Audio Codec | Texas Instruments

The Texas Instruments PCM3008T/2K is a low-power, low-voltage 16-bit stereo audio codec with two single-ended analog inputs and two single-ended analog outputs, packaged in a 16-pin TSSOP (PW). It operates from a 2.4 V supply, supports an operating temperature range of -25 °C to +85 °C, and uses delta-sigma modulation with 64-times oversampling for its ADCs and DACs. The codec includes digital decimation, high-pass, interpolation, de-emphasis, and pop-noise-free muting functions. An audio codec converts between analog audio signals and a digital data interface. In this product family, the ADC path digitizes left and right single-ended analog inputs, while the DAC path reconstructs digital audio into left and right analog outputs. The PCM3008 family is positioned as a compact single-chip solution for consumer audio, communication, and embedded audio equipment where a low-voltage digital interface and direct analog signal conversion are required. The integrated codec architecture reduces the number of separate converters required in a stereo audio design. According to the manufacturer product information, both ADCs and DACs use delta-sigma modulation with 64-times oversampling. ADC channels include digital decimation filters and digital high-pass filters, while the DAC channels include an 8-times oversampling digital interpolation filter, a digital de-emphasis filter, and pop-noise-free muting. The line output also includes hardware control, as indicated by the product-page description. The PCM3008T/2K is a 2.4 V part intended for low-voltage audio systems. The 16-bit resolution provides a 16-bit audio data format, while the stereo ADC and DAC arrangement supports two-channel capture and playback. Its TSSOP package is suitable for compact surface-mount layouts where a traditional analog and digital interface controller would be too large or unnecessarily complex. Typical uses include portable consumer audio equipment, USB or digital audio accessory designs, sound-card and interface modules, voice terminals, multimedia appliances, and compact embedded audio products. The low-voltage architecture is useful when the surrounding system derives its analog and digital supply from a single low-voltage rail or a regulated 2.4 V source. Designers should use the manufacturer datasheet pin-description table when assigning signal names and PCB tracks, especially for the serial audio interface, analog supplies, analog inputs, analog outputs, and control pins. Power and analog return paths should be routed carefully to minimize coupling between the converter sections and the digital interface. The exact input and output capacitor recommendations, clock requirements, and supported serial-interface modes should be confirmed from the manufacturer datasheet. This product page combines the manufacturer product description, ordering information, distributor listing details, and cross-reference information for the PCM3008T/2K. The available data identifies the device as a 16-bit, 2 ADC/2 DAC, single-ended stereo audio codec in a 16-pin TSSOP package; additional electrical limits and detailed timing parameters should be taken directly from the manufacturer datasheet.

RFQ پەیوەندی
PCM3010DB - 24-Bit Stereo Audio Codec | Texas Instruments
PCM3010DB

PCM3010DB - 24-Bit Stereo Audio Codec | Texas Instruments

Texas Instruments PCM3010DB is a low-cost, single-chip stereo audio codec integrating a 24-bit ADC and 24-bit DAC, with single-ended analog inputs and outputs, 96 kHz ADC conversion, and 192 kHz DAC playback in a 24-pin SSOP package. Both converters use delta-sigma modulation, while the ADC includes a digital decimation filter and the DAC uses an 8-times-oversampling architecture. An audio codec is an interface IC that converts analog audio into a digital bitstream and reconstructs digital audio into analog signals. The PCM3010 combines both conversion paths in one package, reducing component count in cost-sensitive consumer equipment. Its digital interface connects a digital audio processor, microcontroller, or other host with external analog microphones, line-level sources, speakers, headphones, and other audio circuits. Key features include 24-bit stereo conversion, single-ended analog input and output, 64-times ADC oversampling, 8-times DAC oversampling, simultaneous ADC and DAC operation, and power-down capability. The 96 kHz maximum ADC sampling rate supports high-rate digital audio capture, while the 192 kHz maximum DAC rate supports higher-rate playback and multimedia applications. The integrated codec architecture avoids separate ADC and DAC packages when both conversion directions are required. The converters rely on delta-sigma modulation to shape quantization noise away from the audio band. According to the Texas Instruments PCM3010 datasheet, the ADC path includes a digital decimation filter with a high-pass filter, while the DAC path includes an 8-times-oversampling filter stage. The device is fabricated using CMOS technology and is intended for cost-sensitive consumer applications where compactness and integrated audio conversion are important. Typical uses include digital audio recorders, multimedia appliances, USB and portable audio equipment, consumer audio processors, and mixed-signal systems requiring both microphone capture and audio playback. In these systems, the PCM3010 can accept a single-ended analog source, provide a digital serial stream to the audio engine, and return a digital stream for analog playback. The integrated power-down function can reduce system power when the codec is not needed. Careful PCB layout is essential because high-resolution audio converters combine sensitive analog inputs with clocked digital signals. Place analog and digital return-current paths separately, decouple the supply close to the device, use a quiet analog reference source, and route the serial data and clock nets away from input pins. Select external input and output filtering according to the intended source impedance, anti-alias requirements, and output-load network. This product page organizes the PCM3010DB specifications, conversion architecture, application guidance, pinout reference, and confirmed same-footprint alternatives into one engineering-focused resource. It also distinguishes exact package compatibility from merely similar codecs, helping designers verify replacement requirements before committing a new board revision.

RFQ پەیوەندی
PCM3010DBR - 24-Bit Stereo Audio Codec | Texas Instruments (Tape & Reel)
PCM3010DBR

PCM3010DBR - 24-Bit Stereo Audio Codec | Texas Instruments (Tape & Reel)

Texas Instruments PCM3010DBR is a low-cost, single-chip stereo audio codec integrating a 24-bit ADC and 24-bit DAC, with single-ended analog inputs and outputs, 96 kHz ADC conversion, and 192 kHz DAC playback in a 24-pin SSOP package. Both converters use delta-sigma modulation, while the ADC includes a digital decimation filter and the DAC uses an 8-times-oversampling architecture. An audio codec is an interface IC that converts analog audio into a digital bitstream and reconstructs digital audio into analog signals. The PCM3010 combines both conversion paths in one package, reducing component count in cost-sensitive consumer equipment. Its digital interface connects a digital audio processor, microcontroller, or other host with external analog microphones, line-level sources, speakers, headphones, and other audio circuits. Key features include 24-bit stereo conversion, single-ended analog input and output, 64-times ADC oversampling, 8-times DAC oversampling, simultaneous ADC and DAC operation, and power-down capability. The 96 kHz maximum ADC sampling rate supports high-rate digital audio capture, while the 192 kHz maximum DAC rate supports higher-rate playback and multimedia applications. The integrated codec architecture avoids separate ADC and DAC packages when both conversion directions are required. The converters rely on delta-sigma modulation to shape quantization noise away from the audio band. According to the Texas Instruments PCM3010 datasheet, the ADC path includes a digital decimation filter with a high-pass filter, while the DAC path includes an 8-times-oversampling filter stage. The device is fabricated using CMOS technology and is intended for cost-sensitive consumer applications where compactness and integrated audio conversion are important. Typical uses include digital audio recorders, multimedia appliances, USB and portable audio equipment, consumer audio processors, and mixed-signal systems requiring both microphone capture and audio playback. In these systems, the PCM3010 can accept a single-ended analog source, provide a digital serial stream to the audio engine, and return a digital stream for analog playback. The integrated power-down function can reduce system power when the codec is not needed. Careful PCB layout is essential because high-resolution audio converters combine sensitive analog inputs with clocked digital signals. Place analog and digital return-current paths separately, decouple the supply close to the device, use a quiet analog reference source, and route the serial data and clock nets away from input pins. Select external input and output filtering according to the intended source impedance, anti-alias requirements, and output-load network. This product page organizes the PCM3010DBR specifications, conversion architecture, application guidance, pinout reference, and confirmed same-footprint alternatives into one engineering-focused resource. It also distinguishes exact package compatibility from merely similar codecs, helping designers verify replacement requirements before committing a new board revision.

RFQ پەیوەندی
PCM3060PW - 24-Bit Stereo Audio Codec | Texas Instruments
PCM3060PW

PCM3060PW - 24-Bit Stereo Audio Codec | Texas Instruments

Texas Instruments PCM3060PW is a single-chip 24-bit stereo audio codec with two single-ended analog inputs, two differential analog outputs, 16–96 kHz sampling rates, and 16/24-bit digital audio words, housed in a 28-pin TSSOP package. It combines a stereo ADC using a 64-times delta-sigma modulator with a stereo DAC using a 64- or 128-times delta-sigma modulator. An audio codec converts between analog audio and digital audio data. The PCM3060 integrates both conversion functions, control registers, digital attenuation, soft mute, de-emphasis, and serial host communication on one device. Its interface supports 3-wire SPI-compatible or 2-wire I²C-compatible control, while its audio interface handles the digital conversion data. This integrated architecture suits sound-processing equipment requiring stereo capture and playback without separate ADC and DAC packages. The codec supports 16/24-bit digital audio words at sampling rates from 16 kHz through 96 kHz. Differential analog outputs help reduce common-mode noise and support balanced output routing, while the two single-ended ADC inputs simplify source capture. Programmable digital attenuation, soft mute, and de-emphasis provide useful control functions for consumer audio, television, set-top-box, and audiovisual equipment. The PCM3060 is fabricated using an advanced CMOS process and integrates delta-sigma conversion, digital filtering, and interface control into a 28-pin TSSOP package. This mixed-signal design supports 24-bit resolution while keeping the external component count lower than a discrete converter solution. The control interface provides access to operating functions from a host processor. Typical uses include DVD-RW equipment, digital televisions, set-top boxes, and other audiovisual systems. The same architecture also fits industrial sound modules, stereo recording interfaces, digital mixing equipment, and playback products requiring both microphone-line input capability and line-level differential output. PCB implementation should preserve short analog traces, provide a quiet analog ground connection, and place input and output bypass capacitors close to their associated pins. The digital interface and analog signal paths should be routed to limit coupling between switching signals and sensitive conversion circuitry. Confirm the pin-description table in the manufacturer datasheet before assigning every trace and decoupling connection. This product page combines the manufacturer’s codec specifications, package information, application guidance, pricing workflow, and verified drop-in substitution analysis. It also provides practical comparison points and design notes intended to accelerate component selection, PCB implementation, and second-source qualification for stereo audio designs.

RFQ پەیوەندی
PCM3060PWR - 24-Bit Stereo Audio Codec | Texas Instruments (Tape & Reel)
PCM3060PWR

PCM3060PWR - 24-Bit Stereo Audio Codec | Texas Instruments (Tape & Reel)

Texas Instruments PCM3060PWR is a single-chip 24-bit stereo audio codec with two single-ended analog inputs, two differential analog outputs, 16–96 kHz sampling rates, and 16/24-bit digital audio words, housed in a 28-pin TSSOP package. It combines a stereo ADC using a 64-times delta-sigma modulator with a stereo DAC using a 64- or 128-times delta-sigma modulator. An audio codec converts between analog audio and digital audio data. The PCM3060 integrates both conversion functions, control registers, digital attenuation, soft mute, de-emphasis, and serial host communication on one device. Its interface supports 3-wire SPI-compatible or 2-wire I²C-compatible control, while its audio interface handles the digital conversion data. This integrated architecture suits sound-processing equipment requiring stereo capture and playback without separate ADC and DAC packages. The codec supports 16/24-bit digital audio words at sampling rates from 16 kHz through 96 kHz. Differential analog outputs help reduce common-mode noise and support balanced output routing, while the two single-ended ADC inputs simplify source capture. Programmable digital attenuation, soft mute, and de-emphasis provide useful control functions for consumer audio, television, set-top-box, and audiovisual equipment. The PCM3060 is fabricated using an advanced CMOS process and integrates delta-sigma conversion, digital filtering, and interface control into a 28-pin TSSOP package. This mixed-signal design supports 24-bit resolution while keeping the external component count lower than a discrete converter solution. The control interface provides access to operating functions from a host processor. Typical uses include DVD-RW equipment, digital televisions, set-top boxes, and other audiovisual systems. The same architecture also fits industrial sound modules, stereo recording interfaces, digital mixing equipment, and playback products requiring both microphone-line input capability and line-level differential output. PCB implementation should preserve short analog traces, provide a quiet analog ground connection, and place input and output bypass capacitors close to their associated pins. The digital interface and analog signal paths should be routed to limit coupling between switching signals and sensitive conversion circuitry. Confirm the pin-description table in the manufacturer datasheet before assigning every trace and decoupling connection. This product page combines the manufacturer’s codec specifications, package information, application guidance, pricing workflow, and verified drop-in substitution analysis. It also provides practical comparison points and design notes intended to accelerate component selection, PCB implementation, and second-source qualification for stereo audio designs.

RFQ پەیوەندی
PCM3500E - 16-Bit Mono Voice Codec | Texas Instruments
PCM3500E

PCM3500E - 16-Bit Mono Voice Codec | Texas Instruments

Texas Instruments PCM3500E is a low-voltage, low-power, 16-bit mono SoundPlus voice and modem codec in a 24-SSOP package. It operates from a 2.7 V to 3.6 V supply and integrates the functions required for modem analog front ends and speech-processing systems. The codec combines a mono single-to-differential converter, a fully differential fifth-order delta-sigma modulator, decimation filtering, a digital high-pass filter, and a serial interface circuit. A voice codec is a mixed-signal integrated circuit that converts an analog voice signal into a digital bitstream and reconstructs a digital audio stream into an analog signal. In the product hierarchy, PCM3500E is a SoundPlus voice codec, a specialized audio codec, and therefore part of the broader amplifier, interface, and power-management ecosystem. Its mono architecture is appropriate for one speech channel, modem equipment, and portable voice terminals where power consumption and board area are important. The 16-bit resolution provides the primary signal representation for the voice path, while the delta-sigma modulator and decimation filter implement the conversion from analog voice information to a serial digital stream. The integrated power-down function supports systems that need to reduce consumption when the codec is not active. The 2.7 V to 3.6 V operating range aligns with low-voltage digital systems and portable equipment supplied from 3.3 V rails. The PCM3500E is designed for modem analog front-end and speech-processing applications. Its mono single-to-differential input stage is intended to provide a differential signal to the internal modulator, helping the converter operate with its intended signal structure. The serial interface provides the digital connection between the codec and a host processor, digital signal processor, or communications controller. Engineers should pay close attention to the 24-SSOP footprint, analog input routing, reference requirements, bypass capacitors, serial-interface timing, and the 2.7 V to 3.6 V supply limits. Because the device is designed around a voice-band signal chain, microphone and line-level inputs require appropriate gain and impedance conditioning before reaching the converter. This page combines the manufacturer product description with practical application guidance, pin and packaging information, selection criteria, and a comparison framework for engineers evaluating codec upgrades or replacements. It emphasizes the PCM3500E's 16-bit mono architecture, low-voltage operation, integrated power-down capability, and suitability for compact voice and modem equipment.

RFQ پەیوەندی
PCM3500E/2K - 16-Bit Mono Voice Codec | Texas Instruments
PCM3500E/2K

PCM3500E/2K - 16-Bit Mono Voice Codec | Texas Instruments

The Texas Instruments PCM3500E/2K is a low-voltage, low-power, 16-bit mono SoundPlus voice and modem codec with a 24-pin SSOP package. It operates from a 2.7 V to 3.6 V supply, supports sampling frequencies from 7.2 kHz to 26 kHz, and provides a typical dynamic range of 88 dB at an 8 kHz sampling frequency with a 1 kHz input. A voice codec is a mixed-signal semiconductor that converts between an analog audio signal and a digital serial data stream. The PCM3500 integrates a 16-bit delta-sigma ADC, a 16-bit delta-sigma DAC, microphone and line-level analog paths, voice-band filtering, and a serial interface. Its architecture is intended for modem analog front ends, speech-processing systems, portable communications equipment, and other compact voice-recording products. Key features include support for modem operation up to 56 kbps, a 512fS system clock, master or slave clock operation, and an integrated power-down function. The ADC includes reference circuitry, mono single-to-differential conversion, a fully differential fifth-order delta-sigma modulator, a decimation filter with a digital high-pass function, and a serial interface. These functions concentrate the essential voice-processing path into one device. The PCM3500E/2K uses the 24-pin SSOP package identified as DB by Texas Instruments. Its low supply-voltage range suits systems built around 3.3 V power rails, while the integrated power-down mode helps reduce consumption when the voice path is inactive. The serial interface permits connection to a digital signal processor, application processor, modem, or other codec through clock and data signals. Typical uses include modem analog front ends, speech-capture terminals, telephone interface modules, portable voice appliances, industrial communication equipment, and embedded speech-recording systems. Its voice-band sampling range is particularly appropriate for speech rather than high-fidelity music, and its mono architecture avoids using resources that a stereo codec would require. For a new design, route the microphone or line input through the appropriate analog pins, configure the serial interface for the required master or slave clock relationship, and use the manufacturer pin-description table when assigning PCB tracks. Decoupling and analog grounding should follow the recommended application circuit because mixed-signal codec performance depends on separating digital switching activity from sensitive audio paths. This product page consolidates the codec's electrical characteristics, ordering information, drop-in alternatives, application guidance, and PCB-oriented design notes into an engineering-focused reference for voice and modem signal-chain development.

RFQ پەیوەندی
PCM3500EG4 - 16-Bit Mono Voice Codec | Texas Instruments
PCM3500EG4

PCM3500EG4 - 16-Bit Mono Voice Codec | Texas Instruments

Texas Instruments PCM3500EG4 is a low-voltage, low-power, 16-bit mono SoundPlus voice and modem codec operating from a 2.7 V to 3.6 V supply and housed in a 24-pin SSOP package. It supports voice-band signal conversion for modem analog front ends, speech processing, telephony, and other single-channel audio systems. A voice or modem codec is an interface IC that converts analog audio into a digital serial stream and reconstructs an analog signal from digital audio data. In the signal-chain hierarchy, it belongs to the audio codec family within interface ICs and semiconductor signal-processing devices. The PCM3500EG4 combines a mono analog channel with a serial digital interface, providing a compact solution where low supply voltage, low power, or voice-band bandwidth is more important than stereo playback functionality. The principal device characteristics include 16-bit resolution, mono operation, a 2.7 V to 3.6 V power-supply range, and a typical ADC signal-to-noise ratio of 88 dB. Integrated power-down capability reduces consumption when the voice channel is inactive. Its serial interface can also support time-slot arrangements in which as many as four PCM3500 devices share a four-wire interface bus using four positions in a 64-bit long frame. PCM3500EG4 targets applications where a dedicated voice-band converter is preferable to a general-purpose multimedia codec. The mono architecture avoids the channels and controls required for stereo playback, while the 16-bit interface is suitable for speech and modem waveforms. Its low-voltage operation also makes it appropriate for portable communication equipment operating from a 3.3 V system rail. Typical uses include modem analog front ends, speech-processing systems, telephone-interface equipment, voice-recording terminals, and compact communications controllers. In a modem or speech system, the codec can convert microphone-band or line-band audio to serial PCM data for a digital signal processor, while its decoding path reconstructs the analog voice signal. Multiple codecs can share a serial bus when time-slot multiplexing is required. Power-supply noise deserves particular attention because operation at or near the 2.7 V minimum reduces analog headroom and can degrade the achievable signal-to-noise ratio. Place the required bypass capacitors close to the supply pins, keep analog and digital return-current paths controlled, and follow the pin-description and layout guidance in the manufacturer datasheet when assigning PCB tracks. This product summary combines the PCM3500EG4 device identity, voltage and resolution requirements, voice-band use cases, interface-sharing capability, and practical power considerations to support component selection, schematic review, and footprint planning.

RFQ پەیوەندی
PCM3501E/2K - 16-Bit Mono Voice Codec | Texas Instruments
PCM3501E/2K

PCM3501E/2K - 16-Bit Mono Voice Codec | Texas Instruments

The Texas Instruments PCM3501E/2K is a low-voltage, low-power, 16-bit mono SoundPlus voice and modem codec in a 24-pin SSOP package. It operates from a 2.7 V to 3.6 V supply and combines one analog-to-digital channel with one digital-to-analog channel for voice-band signal processing. The /2K ordering code denotes a tape-and-reel package containing 2,000 devices. A voice codec is an interface IC that converts between analog audio signals and digital PCM data. The PCM3501E/2K belongs to the broader codec hierarchy: integrated circuit, interface IC, audio codec, and mono voice or modem codec. This device is intended for compact systems where one communication voice channel must be digitized and reproduced without the channel count or power requirements of a stereo audio codec. The codec provides a 16-bit PCM serial interface, a mono voice or modem signal path, and operation from a 2.7 V to 3.6 V analog supply. Its low-voltage and low-power characteristics suit portable and embedded communication equipment in which the codec must operate alongside 3.3 V digital logic. The 24-pin SSOP package also supports conventional surface-mount assembly and automated production. Because the device handles both analog conversion and digital serialization, its performance depends on correct power distribution, grounding, and interface implementation. A clean 3.3 V supply helps prevent converter reference or digital-interface disturbances from reaching the voice path. The manufacturer datasheet should be used for clock timing, analog biasing, filtering, and decoupling values because those detailed operating conditions are not reproduced on this page. Typical uses include single-channel voice processing in modem and telephone interface equipment, compact audio communication terminals, digital answering devices, and embedded voice-capable appliances. In each case, the PCM3501E/2K serves as the bridge between an analog microphone or line-level voice signal and a digital processor or serial interface. For a new PCB, use the 24-pin SSOP footprint and follow the pin-description table in the manufacturer datasheet when assigning analog, digital, clock, and supply connections. For an existing PCM3501E design, verify package orientation, supply sequencing, clock source, and the PCB land pattern before treating the /2K tape-and-reel ordering option as a replacement. This page brings together the manufacturer ordering information, package details, drop-in comparison data, and practical integration guidance. It also distinguishes electrical and functional interchangeability from the distinction between tube and tape-and-reel delivery configurations, helping engineers make a more reliable sourcing and assembly decision.

RFQ پەیوەندی
PCM3794RHB - Low-Power Stereo Audio Codec w/ HP Amp | Texas Instruments
PCM3794RHB

PCM3794RHB - Low-Power Stereo Audio Codec w/ HP Amp | Texas Instruments

The Texas Instruments PCM3794RHB is a very low-power stereo audio codec with an integrated headphone amplifier, notch filters, automatic level control (ALC) and 3D effects, packaged in a 32-pin VQFN (RHB) 5 x 5 mm surface-mount package. The device combines analog-to-digital and digital-to-analog conversion in one IC and is classified by the manufacturer under Interface ICs > CODECs, with distributor catalogues listing it in the Interface - Telecom family. An audio codec is a mixed-signal integrated circuit that converts analog audio signals into a digital bitstream for transmission or storage and converts digital audio data back into analog voltage for playback. The codec hierarchy runs from audio codec, to sound converter, to interface IC, to integrated circuit, and finally to semiconductor. Placing the converter, digital filters, and headphone output stage in a single package shortens the analog path, reduces board area, and lowers system cost in handsets, portable audio, and networked voice terminals. The PCM3794 differentiates itself mainly through its analog output stage. Instead of driving headphones through an external discrete amplifier, the device provides an on-chip headphone amplifier, which removes the need for a separate output buffer and the associated EMI filtering. The integrated notch filters remove DC and low-frequency hum before the signal reaches the headphone driver, while the ALC function automatically adjusts gain during level changes so recordings stay consistent without manual gain rides. The 3D effect stage adds a simple spatial widening to the stereo image for playback enhancement. The PCM3794 communicates with a host processor over a serial audio bus, and distributor records describe the part as a 16-bit serial stereo audio interface. Because the conversion, filtering and headphone functions sit behind one serial interface, the host only needs an audio port, a few control registers, and a compact passives network around the analog pins. The 32-pin VQFN footprint keeps the layout small enough for handset and dongle form factors where board area is tightly constrained. Typical deployments include voice-over-IP terminals, USB and Bluetooth audio dongles, portable media players, smart speaker front ends, VoIP handsets and industrial call-box modules. In each case the codec reduces the number of external active components and keeps the analog output path short, which helps limit board noise coupling into the microphone and headphone loops. When laying out a design around the PCM3794RHB, keep the analog supply decoupling close to the device, place input and output capacitors on the shortest possible traces, and route the digital interface signals away from the microphone and headphone nets. Confirm the exposed-pad connection and thermal requirements against the manufacturer datasheet before committing to a high-temperature operation in a sealed enclosure.

RFQ پەیوەندی
PEF20525FV1.3 - Serial Comm Controller SEROCCO-H | Infineon
PEF20525FV1.3

PEF20525FV1.3 - Serial Comm Controller SEROCCO-H | Infineon

The Infineon PEF20525FV1.3 is a SEROCCO-H Serial Optimized Communications Controller IC, designed for high-performance telecommunications applications. It features two independent serial channels and provides advanced PPP/HDLC protocol handling, packaged in a 100-pin TQFP (PG-TQFP-100-3) surface-mount form factor for embedded telecom systems. A Telecom IC (also called a network controller or serial communications controller) is a specialized integrated circuit that offloads data link layer protocol processing from a host CPU. It sits between the physical layer transceiver and the host processor, implementing framing, CRC, and channel management for synchronous serial links. In the system hierarchy, it belongs to the interface IC / network controller & processor category of integrated circuits, enabling deterministic serial data flow in equipment such as ISDN terminal adapters, xDSL modems, and T/E-carrier interface cards. Key features of the PEF20525FV1.3 include two independent serial channels with full-duplex operation, integrated PPP/HDLC framing support, hardware-assisted bit processing for low host CPU overhead, and flexible clocking for T-carrier and E-carrier telecom standards. The device also offers DMA-friendly host interface options and comprehensive interrupt/status reporting, allowing tight integration with embedded host processors. The SEROCCO-H architecture combines dedicated hardware engines for HDLC/PPP framing, CRC generation and checking, and serial channel arbitration. This offloads heavy protocol processing from the host CPU, allowing the host to focus on higher-layer networking tasks. The dual-channel design enables simultaneous handling of two independent serial links, which is valuable for routers, gateways, and multi-port communication equipment. Typical applications include ISDN terminal adapters, xDSL modems, T1/E1 interface cards, frame relay equipment, and embedded telecom modules for factory or industrial networking. The wide protocol support and dual-channel capability make it suitable for any application requiring deterministic serial data link processing. When designing with the PEF20525FV1.3, ensure proper decoupling near the supply pins and follow Infineon's reference layout for the PG-TQFP-100-3 package. The host interface should be configured according to the chosen bus width and endianness to minimize glue complexity. Designers should also verify the latest firmware/driver support matrix from Infineon for their specific host processor family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
PEF2256HV2.2 - Quad E1/T1/J1 Framer & LIU | Infineon | MQFP-80
PEF2256HV2.2

PEF2256HV2.2 - Quad E1/T1/J1 Framer & LIU | Infineon | MQFP-80

The Infineon PEF2256HV2.2 (FALC56) is a quad E1/T1/J1 framer and line interface component (LIU) for long- and short-haul telecom applications, housed in an 80-pin P-MQFP-80-1 (Metric QFP) package. It integrates four independent framers and LIU channels on a single die, supporting both North American T1/J1 (1.544 Mbps) and European E1 (2.048 Mbps) PCM hierarchies as well as the H.100/H.110 and H-MVIP digital system highway buses for world-market telecommunication systems. A Line Interface Unit (LIU) is the analog front-end of a TDM telecom system that interfaces between the physical twisted-pair line and the digital PCM backplane. The PEF2256 quad-LIU topology places four such analog interfaces on one chip, allowing one device to terminate an entire T1/E1 quad trunk - reducing board area, BOM count, and power per channel compared with four discrete LIUs. The device belongs to the FALC56 family of framers and line interface components, itself part of the broader framer/line-interface-unit category within telecom interface ICs. Key features include programmable pulse shaping for short-haul and long-haul operation, integrated receive equalization, on-chip jitter attenuator, HDLC controllers per channel, and a flexible parallel micro-controller interface. The device handles both unipolar and bipolar line signalling and provides diagnostic loopback modes (local, remote, payload) per channel. Built-in BERT (Bit Error Rate Test) pattern generation and checking aid field deployment and production test. Typical applications include ISDN PRI (Primary Rate Interface) cards, channel banks, digital cross-connect systems, PBX trunk interfaces, cellular base station backhaul, and multi-port T1/E1/J1 line cards. With four channels per chip, designers can build a 4-port line card with one LIU, simplifying PCB layout and reducing overall system cost. When designing with the PEF2256HV2.2, ensure the analog line-side circuits (transformer, protection, termination) are placed close to the LIU pins to minimize crosstalk between the four on-chip channels. The internal jitter attenuator simplifies clock-recovery design and is configurable per channel via the microcontroller interface. This page synthesizes distributor pricing, drop-in alternatives and practical design notes that complement the manufacturer datasheet. Prices are listed as of 2026-10-09 from authorized distributors.

RFQ پەیوەندی
PEF24628EV1.2-G - Quad-Channel EFM SHDSL SoC | Infineon
PEF24628EV1.2-G

PEF24628EV1.2-G - Quad-Channel EFM SHDSL SoC | Infineon

The Infineon PEF24628EV1.2-G is a quad-channel EFM (Ethernet First Mile) Symmetrical High-bit-rate Digital Subscriber Line (SHDSL) transceiver System-on-Chip, integrating four independent SHDSL channels with on-chip HDLC controllers, serializer/deserializer (SerDes) interfaces, and an embedded management interface. The part is housed in a PG-LBGA-324-2 (324-pin low-profile BGA) package and operates from 1.5 V core and 3.3 V I/O supply rails. It supports the full SHDSL.bis (G.991.2) standard for symmetric DSL transmission over 2-wire copper pairs, enabling EFM bonding for aggregated multi-pair Ethernet services at the customer premises and central office. A System-on-Chip (SoC) in the telecom interface category is a highly integrated device that combines a CPU subsystem, multiple dedicated protocol engines, and a flexible host interface on a single silicon die. The PEF24628 belongs to the SHDSL/EFM transceiver SoC family, which sits hierarchically under: telecom interface IC -> wired broadband transceiver -> xDSL transceiver -> SHDSL front-end SoC. The device historically originated from the Lantiq product line, which Infineon acquired and now sells as part of its wireline communications portfolio. Key features include four independent SHDSL channels, support for EFM bonding (G.998.1), on-chip HDLC controllers, parallel and serial host interfaces, low-jitter PLL clock synthesis, and integrated line driver interface logic. The HDLC engine, parallel/serial host ports, and flexible interrupt structure minimize the burden on the external host CPU in a DSLAM line card or CPE modem design. The architecture is built on a mature 0.13 um CMOS process with mixed-signal analog front-end circuitry for the SHDSL line interface. The part includes dedicated per-channel DSP engines for SHDSL symbol processing, echo cancellation, and trellis coding. Internal SRAM buffers per channel help absorb latency variation on the host bus, and the SerDes block supports multi-channel aggregation to a framer/backhaul device. Typical applications include SHDSL.bis line cards in DSLAMs, multi-pair bonded EFM Ethernet modems, four-wire industrial DSL links, and legacy E1/T1 extension infrastructure over copper. The quad-channel density makes it a strong fit for small-form-factor CPE MDU/MTU aggregation where four bonded pairs are needed. Design consideration: pay close attention to the PG-LBGA-324-2 PCB land pattern, controlled-impedance differential routing for the SHDSL line pairs, and proper thermal management - the device dissipates significant power when all four channels are active. Reference Infineon design notes for the recommended magnetics, line protection, and host-IF timing budget. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
PEF2466HV2.2 - 4-Ch SICOFI Codec/Filter POTS | Infineon
PEF2466HV2.2

PEF2466HV2.2 - 4-Ch SICOFI Codec/Filter POTS | Infineon

The Infineon PEF2466HV2.2 is a four-channel Signal Processing Codec/Filter (SICOFI-4-µC) IC designed for Plain Old Telephone Service (POTS) line interfacing in central-office and carrier-class equipment. Housed in a P-MQFP-64-1 (64-pin Metric Quad Flat Pack) package, this telecom IC integrates four independent codec/filter channels with programmable gain, A-law/µ-law companding, and on-chip hybrid balance networks, making it a logical continuation of the well-established Siemens/Infineon SICOFI programmable codec-filter family. A codec/filter IC is a mixed-signal device that performs the analog-to-digital and digital-to-analog conversion plus the band-limiting transmit/receive filtering required to interface voice-band (300 Hz to 3.4 kHz) analog telephone lines to a digital PCM/TDM backplane such as an E1/T1 link. Within the system hierarchy, it sits between the line-side SLIC (Subscriber Line Interface Circuit) and the system-side PCM highway controller, occupying the role of a per-channel voice-band data pump in the access network. Key features include four fully independent codec/filter channels with 16-bit linear or 8-bit A-law/µ-law companded PCM coding, programmable transmit and receive gain/attenuation in 0.1 dB steps, on-chip hybrid-balance and anti-alias filters, and a serial µC or SPI control interface. The device targets 3.3 V/5 V digital supplies and a +/-5 V analog supply, supporting extended industrial temperature grades typical for outdoor or remote-cabinet telecom deployments. Architecturally, the PEF2466HV2.2 uses a sigma-delta conversion front-end per channel with dedicated switched-capacitor filters, providing flat group delay across the voice band and very low total harmonic distortion. The integrated µC interface allows per-channel gain calibration and channel-by-channel A-law/µ-law selection, eliminating external DSP overhead for companding and gain control. Typical applications include 4-channel POTS line cards in central-office switches, integrated access devices (IADs), digital loop carrier (DLC) systems, VoIP media gateways with FXS ports, and PBX line interface modules where four voice channels must be terminated in a single low-footprint device. When designing with the PEF2466HV2.2, careful attention must be paid to analog/digital ground partitioning, the PCM clock and frame-sync timing relationship, and the decoupling of the +/-5 V analog rails. The part is now in long-term supply under the Infineon (formerly Lantiq) telecom portfolio, and procurement should be planned against documented last-time-buy milestones where applicable. This page synthesizes distributor pricing, family-mate and same-package alternatives, and practical interface-design notes that complement the manufacturer datasheet with sourcing and migration context.

RFQ پەیوەندی
PEX8509-AA25BI - 8-Lane 8-Port PCIe Switch | Broadcom
PEX8509-AA25BI

PEX8509-AA25BI - 8-Lane 8-Port PCIe Switch | Broadcom

Broadcom PEX8509-AA25BI is an eight-lane, eight-port PCI Express switch conforming to PCI Express Base Specification Revision 1.1, with integrated 2.5 Gbps SerDes and a 196-ball PBGA package measuring 15 mm by 15 mm. Its eight-lane PCIe switch architecture routes traffic among multiple endpoints while supporting scalable, non-blocking interconnect designs. The device is identified as a low-power ExpressLane PCIe switch suitable for communications equipment, consumer products, servers, and storage systems. A PCI Express switch is a semiconductor within the interface-controller and connectivity hierarchy. It manages transaction traffic between a host or upstream PCIe port and downstream devices, allowing one system bus to serve several endpoints. The PEX8509-AA25BI supports PCIe Gen 1 operation at 2.5 Gbps per lane, provides up to eight ports, and uses integrated SerDes to connect PCIe links to the switching fabric. Its flexible configuration is intended to broaden system connectivity without requiring a separate switch for each endpoint. The primary feature of this part is its combination of eight PCIe lanes and eight ports in one package. Broadcom describes the PEX 8509 as a low-power switching solution with typical power consumption of 1.2 W. That operating point makes it relevant to space-conscious embedded and communications platforms where link breadth, board area, and power budget all influence product selection. The device supports non-blocking interconnect architectures used in scalable storage and communication equipment. Technical implementation centers on the integrated SerDes interfaces and PCIe switch fabric. A Gen 1 link operates at 2.5 Gbps, while the switch coordinates traffic arriving from the upstream host and distributing requests to downstream endpoints. Designers must account for lane-to-port mapping, reference-clock requirements, transmitter equalization, receiver configuration, power sequencing, and the high-speed layout constraints of a 196-ball PBGA device. These considerations make careful reference-design review essential before schematic capture or PCB routing. Typical uses include external storage controllers, server expansion systems, embedded communication platforms, consumer networking equipment, and industrial systems that need multiple PCIe endpoints behind one host connection. The switch is particularly relevant when adding endpoint capacity without redesigning the entire host interface around individual downstream controllers. A central design consideration is PCB implementation. The 15 mm by 15 mm BGA requires controlled escape routing, a multilayer board with suitable high-speed stack-up, length matching where required, and a power delivery network capable of supporting approximately 1.2 W typical device power while maintaining acceptable voltage behavior at the ball grid. This product summary consolidates the Broadcom architecture information, package characteristics, application fit, replacement assessment, comparison fields, and implementation guidance needed to evaluate the PEX8509-AA25BI before committing it to a PCI Express switch design.

RFQ پەیوەندی
PEX8533-AA25BI - 32-Lane Gen2 PCIe Switch | Broadcom
PEX8533-AA25BI

PEX8533-AA25BI - 32-Lane Gen2 PCIe Switch | Broadcom

Broadcom PEX8533-AA25BI is a 32-lane PCI Express Gen2 switch with an integrated SerDes and up to six configurable ports, supplied in a 680-pin 35 mm FPBGA package. It provides typical power consumption of 3.3 W and is pin compatible with the PEX8532, making it a flexible PCIe routing device for systems that need to fan out multiple PCIe links. A PCI Express switch is a semiconductor device that routes high-speed serial transactions between a root complex, endpoint devices, and other PCIe components. Within the broader hierarchy of interface ICs, PCI Express controllers, and bus controllers, the PEX8533 consolidates multiple lanes into configurable downstream paths. Its integrated SerDes reduces the need for separate transmit and receive PHY components while supporting system-level PCIe port expansion. The switch offers 32 total PCIe lanes and as many as six configurable ports. This combination allows designers to implement systems with multiple endpoint devices, downstream switch structures, or adapter arrangements. Its typical power of 3.3 W is the central thermal figure for board-level planning, while the 680-ball package requires careful high-speed layout, power delivery, and thermal-management techniques. The PEX8533 uses a 35 mm square FPBGA package with 680 terminals. Such a fine-pitch package can provide dense interconnect capacity for high-speed SerDes routing, but it also demands multilayer PCB construction, constrained escape routing, accurate impedance control, and assembly-process capability for the selected package technology. Production designs should follow the manufacturer’s reference layout and evaluation-platform guidance. Typical applications include PCIe expansion systems, high-end server and workstation platforms, storage controllers, accelerator systems, media-processing equipment, and embedded test systems. The six-port configuration is useful where one upstream PCIe connection must feed several downstream endpoint links without relying on separate switch silicon for every branch. Thermal design is essential because the stated typical power is 3.3 W. Board copper, adjacent power circuitry, airflow, and the surrounding enclosure can all influence junction temperature. High-speed differential pairs should use the manufacturer’s recommended layer stack, geometry, and via structures, while power and ground planes require carefully controlled return paths. This page consolidates the available technical facts into an application-oriented guide covering package constraints, thermal considerations, PCIe routing, configuration, and replacement qualification. The PEX8533-AA25BI-G ordering code is identified as a same-package manufacturing variant, while broader functional upgrades are kept outside the strict drop-in replacement list because their packages and configurations differ.

RFQ پەیوەندی
PEX8603-AB50NI - Gen 2 PCIe Switch, 3 Lanes | Broadcom
PEX8603-AB50NI

PEX8603-AB50NI - Gen 2 PCIe Switch, 3 Lanes | Broadcom

The Broadcom PEX8603-AB50NI is a PCI Express Gen 2 switch IC with three lanes, three ports, and three switch channels, housed in a 136-aQFN package measuring 10 x 10 mm. It is designed to add scalable, high-bandwidth, non-blocking interconnection to control-plane, consumer, and embedded systems. The Broadcom PEX 8605 Product Brief describes the ExpressLane PEX8603 as a device suited to fan-out and peer-to-peer connectivity. An operating specification summary identifies the PEX8603-AB50NI as a three-lane, three-port, PCIe Gen 2 switch. Its three-lane architecture allows a host-facing connection and multiple downstream links to share a PCIe link budget when the system topology permits it. This makes the device useful in systems that require an additional PCIe routing layer without relying on a multi-tier switch hierarchy. The 136-aQFN package provides 136 electrical contacts in a compact 10 x 10 mm outline. The high pin count supports the power, ground, high-speed differential lanes, configuration, auxiliary, and control functions normally required by a multi-port PCIe switch. Exact lane assignments, auxiliary signaling support, and pin-level power requirements must be taken from the Broadcom pin-description table before PCB routing begins. PCIe Gen 2 operation supports 5 GT/s signaling per lane, a standard defined for the PCIe generations supported by this switch family. The three-port topology can serve embedded controllers, storage controllers, network interfaces, endpoint devices, and display or capture subsystems that communicate through a common PCIe fabric. The non-blocking architecture allows compatible endpoints to transfer data concurrently rather than sharing a single serialized path. System designers should allocate reference-clock, auxiliary, and power-delivery resources according to the manufacturer application schematic. Decoupling must follow the recommended values and placement shown in the Broadcom reference design, because switch regulators and high-speed receivers can be sensitive to supply noise and return-path discontinuities. Layer-stackup, trace-length matching, and via geometry also control insertion loss and skew across the differential lanes. This page consolidates the verified product identity, package information, topology details, sourcing paths, and engineering guidance for the PEX8603-AB50NI. It also identifies drop-in ordering representations supported by the available documentation and distinguishes them from functional but non-pin-compatible PCIe switch options.

RFQ پەیوەندی
PEX8603-AB50TQIG - 3-Lane PCIe 2.0 Switch | Broadcom
PEX8603-AB50TQIG

PEX8603-AB50TQIG - 3-Lane PCIe 2.0 Switch | Broadcom

The Broadcom PEX8603-AB50TQIG is a three-lane, three-port PCI Express Gen 2.0 switch IC designed to add scalable, non-blocking interconnection between PCI Express devices and a host or root complex. It supports PCI Express Gen 2.0 operation, provides three lanes and three ports, and is associated with a 128-pin TQFP package measuring 14 mm by 14 mm. The device is positioned for control-plane, consumer, embedded, fan-out, and peer-to-peer systems requiring flexible PCIe connectivity. A PCI Express switch is an interface IC within the PCIe semiconductor hierarchy. It accepts traffic arriving on one or more upstream or downstream lanes and routes transactions among multiple endpoints. The PEX8603's three-lane, three-port architecture consolidates several PCIe links behind a single switching fabric, reducing system-level routing complexity while preserving the non-blocking interconnection emphasized in the Broadcom product overview. The principal feature of the PEX8603-AB50TQIG is its PCI Express Gen 2.0 switching capability across a three-lane, three-port configuration. This arrangement makes the switch suitable for systems that need to fan out traffic to multiple PCIe devices or establish peer-to-peer links. Its 128-TQFP surface-mount package supports compact integration on multilayer PCBs, while the exact lead geometry, pin functions, and exposed thermal provisions must be confirmed in the manufacturer pin-description table before layout release. Operationally, the PEX8603 acts as a configurable connectivity point within a PCIe topology rather than as a storage controller, processor, or conventional analog interface. System designers must account for lane allocation, endpoint configuration, reference-clock requirements, reset behavior, power sequencing, and the device's upstream or downstream role. The product overview identifies the device as a Broadcom offering for high-performance computing and efficient data-connectivity applications. Typical uses include embedded systems that connect an SoC or host processor to multiple peripherals, control-plane platforms requiring ordered PCIe expansion, and consumer systems that add multiple endpoint devices without routing each link directly to the root complex. The PEX8603 can also support fan-out and peer-to-peer architectures where independent downstream devices benefit from centralized switch management. PCB implementation requires exact pin-by-pin assignment from the manufacturer datasheet, differential-pair routing for PCI Express lanes, continuous reference planes, suitable decoupling, and controlled-length routing between the switch and connectors or endpoints. Power integrity and thermal design should be evaluated across worst-case traffic and ambient conditions. Do not infer exposed-pad connectivity or pin names from a generic TQFP symbol. This page consolidates the verified PCIe configuration, package information, sourcing path, and practical replacement criteria for engineers evaluating the PEX8603-AB50TQIG. A drop-in alternative must preserve the same package, pinout, electrical functions, lane organization, firmware expectations, and system configuration; a device sold as a generic PCIe switch is not automatically interchangeable.

RFQ پەیوەندی
PEX8604-BA50BC - 4-Lane 4-Port PCIe Gen 2 Switch | Broadcom
PEX8604-BA50BC

PEX8604-BA50BC - 4-Lane 4-Port PCIe Gen 2 Switch | Broadcom

Broadcom PEX8604-BA50BC is a PCI Express switch IC with four Gen 2 lanes, support for as many as four ports, a 5.0 GT/s signaling rate, and a 196-BGA package measuring 15 mm by 15 mm. The device conforms to revision 2.0 of the PCI Express Base Specification and is designed to let one host connection fan out to multiple PCI Express endpoints. It is positioned as a compact fabric switch for consumer, embedded, and industrial systems requiring more PCIe connectivity than a root complex can provide directly. A PCI Express switch is a semiconductor that creates a point-to-point switching fabric between a host or upstream controller and multiple downstream endpoints. Within the hierarchy of interface ICs, PCI Express switches sit below multiport I/O controllers, above individual endpoint devices, and within the broader semiconductor and computer-interface ecosystem. Unlike a simple analog multiplexer, the PEX8604-BA50BC arbitrates high-speed serial transactions, manages lane-level routing, and coordinates PCIe configuration and power-management behavior. The principal features are four Gen 2 lanes, up to four ports, 5.0 GT/s per lane, and compliance with the PCI Express Base Specification revision 2.0. Its 196-BGA package supports compact integration without requiring a large peripheral bridge. The Broadcom product family is also identified as RoHS3 compliant, making it suitable for designs that apply lead-free electronic-component requirements. Exact auxiliary supply voltages, maximum power dissipation, reference clock requirements, and operating-temperature limits should be confirmed in the manufacturer data book before schematic release. The ExpressLane architecture separates PCIe traffic among downstream ports while preserving the packet-based, full-duplex character of PCI Express. In a typical system, the upstream port connects to a root complex or another switch, while downstream ports connect to NVMe controllers, network controllers, capture devices, or FPGA-based endpoint cards. Proper lane allocation, reference-clock distribution, reset sequencing, and power-rail ordering remain essential for reliable operation. System designers should also use the data-book reference design as the basis for connector, via, and return-path implementation. Typical uses include compact workstation and server add-in cards, embedded control systems, test and measurement platforms, storage adapters, and industrial computers. Because Gen 2 signaling provides 5.0 GT/s per lane, the switch is most appropriate for endpoint traffic that fits within the available aggregate link bandwidth. Applications requiring newer PCIe generations should not assume forward compatibility without an explicit engineering review. For layout, place the switch and its decoupling network close to the power and ground planes, minimize high-speed stub lengths, and route each PCIe lane as a controlled-impedance differential pair. Follow the Broadcom reference design for ball assignments, layer transitions, connector launches, and clock routing. Confirm package-ball details and unused-ball treatment from the current manufacturer documentation rather than inferring them from the 196-BGA outline. This product page combines the confirmed PCIe configuration and package information with application guidance, alternative-device comparisons, and practical design considerations. It is intended to help engineers identify the correct switch and plan its integration while keeping unconfirmed electrical details and replacement decisions tied to the manufacturer data book and device-specific validation.

RFQ پەیوەندی
PEX8604-BA50BI - 4-Lane Gen 2 PCIe Switch | Broadcom
PEX8604-BA50BI

PEX8604-BA50BI - 4-Lane Gen 2 PCIe Switch | Broadcom

The Broadcom PEX8604-BA50BI is a PCI Express switch integrated circuit built around the ExpressLane PEX8604 architecture. It provides four PCI Express Gen 2 lanes operating at 5.0 GT/s and supports up to four downstream ports in a 196-BGA package measuring 15 mm by 15 mm. The device conforms to revision 2.0 of the PCI Express Base Specification. This combination makes it a compact PCIe routing solution for systems that need to connect multiple PCI Express endpoints to a host interface. A PCI Express switch is a semiconductor that creates additional PCIe links between a root complex or another switch and multiple endpoint devices. It operates within the PCIe hierarchy as a bridge and switch rather than as an endpoint itself. The PEX8604 belongs to the broad PCIe switch and bridge category, which supports fan-out, embedded systems, consumer equipment, and high-availability platforms where downstream devices must communicate with a central host. The principal device characteristics are four Gen 2 lanes, a maximum of four ports, and a 5.0 GT/s per-lane signaling rate. Broadcom describes the PEX8604 as its smallest four-lane Gen 2 device. The switch also supports PCIe hot-plug functionality for supported downstream configurations, making it relevant to systems where expansion modules are replaced or maintained without powering down the complete platform. The 196-BGA package provides a high pin count for power, ground, high-speed transmit and receive paths, configuration interfaces, reference clocks, and control signals. Such a package also places substantial emphasis on compact board area. Achieving correct Gen 2 operation therefore requires careful PCB layer planning, controlled impedance routing, uninterrupted reference planes, and power-delivery design that meets the device's low- and high-speed requirements. Typical uses include embedded computing platforms, consumer appliances, PCI Express endpoint aggregation, expansion systems, and high-availability equipment with hot-pluggable modules. In these systems, the switch expands one host-facing PCIe connection into multiple downstream links while allowing port-level routing and monitoring functions according to the device configuration. A primary design consideration is signal integrity. The 5.0 GT/s interface requires short, impedance-controlled routes, solid reference planes, suitable via transitions, and connector or package escape geometry designed for low loss. Power sequencing, clock distribution, reset behavior, and the firmware-supported link configuration must also be validated together; satisfying individual data-sheet limits in isolation does not guarantee stable operation across every board stack-up and temperature condition. This product overview synthesizes the manufacturer capabilities, package information, cross-reference findings, and practical implementation considerations into an engineering-focused guide. It also distinguishes documented characteristics from parameters that still require confirmation from the full technical documentation before a new board design is released.

RFQ پەیوەندی