بەرهەمەکان (5,100+)

PEX8606-BA50BI - 6-Lane Gen 2 PCIe Switch | Broadcom
PEX8606-BA50BI

PEX8606-BA50BI - 6-Lane Gen 2 PCIe Switch | Broadcom

Broadcom PEX8606-BA50BI is a PCI Express switch IC with six lanes, six ports, and PCIe Gen 2 operation, housed in a 196-pin PBGA measuring 15 x 15 mm. It is designed for systems that require multiple PCIe endpoints to share a host interface through a dedicated PCIe switch. Each port supports automatic negotiation, lane reversal, and polarity reversal, improving compatibility with installed cards and cable-connected equipment. A PCI Express switch is an interface IC within the broader semiconductor and computer-interface hierarchy. It routes PCIe traffic among a host or root complex, endpoint devices, and other system resources. By expanding one upstream link into multiple downstream ports, the PEX 8606 can simplify board topology in embedded control systems, packet-processing equipment, storage systems, and test platforms while maintaining protocol-level link management. The documented configuration provides six PCIe lanes, six switch ports, two channels, and full PCI Express Base Specification Revision 2.0 compliance. The switch is backward compatible with PCI Express Base Specification Revision 1.1 and Revision 1.0a. Automatic lane-width negotiation allows devices to operate at a speed and width supported by both ends of the link, while lane and polarity reversal add practical tolerance for connector orientation and routing differences. The PEX 8606 architecture is intended for embedded control-plane designs, including packet-processing modules. Its principal engineering benefit is the elimination of multiple host-to-endpoint paths when several PCIe devices must communicate through one system controller. Supporting both current Gen 2 operation and earlier PCIe generations makes it useful when the system must accommodate older endpoint cards or transition from legacy expansion equipment to newer PCIe implementations. Typical applications include industrial packet routers, embedded control modules, network-interface assemblies, storage controllers, instrumentation platforms, and compact computing systems requiring multiple PCIe connections. The 196-pin PBGA supports high-speed, dense board layouts, but its 15 x 15 mm footprint requires careful ball assignment, multilayer routing, reference-plane continuity, and power-distribution design to preserve signal integrity across all six lanes. When integrating the device, plan the board with the Broadcom reference design and pin-assignment documentation, maintain continuous return paths beneath high-speed links, and validate power sequencing across the host and downstream ports. The broad compatibility features reduce link-training risk, but they do not replace proper reference-plane design, connector configuration, or system-level PCIe compliance testing. This product page consolidates the Broadcom PEX 8606 architecture, compatibility features, application guidance, package information, and engineering-oriented replacement analysis to help designers evaluate the switch before beginning a dense PCB implementation.

RFQ پەیوەندی
PEX8608-BA50BC - 8-Lane Gen 2 PCIe Switch | Broadcom
PEX8608-BA50BC

PEX8608-BA50BC - 8-Lane Gen 2 PCIe Switch | Broadcom

Broadcom PEX8608-BA50BC is a PCI Express switch IC with eight Gen 2 lanes at 5.0 GT/s, configurable into up to eight flexible ports, and a 196-PBGA package measuring 15 x 15 mm. It conforms to PCI Express Base Specification revision 2.0 and uses packet cut-through to minimize transfer delay. A PCI Express switch is a semiconductor that routes high-speed serial transactions between a host or upstream endpoint and multiple downstream devices. Within the PCI Express hierarchy, this device is a PCIe switch, a fabric-based interface IC, and a system-level connectivity component. Eight SerDes lanes can be partitioned among several ports, allowing one compact system to aggregate endpoints for communications, control-plane, embedded, storage, and peer-to-peer equipment. The PEX 8608 provides non-blocking internal switching, two virtual channels for traffic prioritization, and full line-rate operation on configured ports. Broadcom describes packet cut-through latency as 140 ns for an x4-to-x1 configuration in its product-page summary and as up to 130 ns in the linked feature documentation. SerDes outputs can be software-controlled for power reduction and signal-strength optimization. Power management follows the PCI Express power-management specification. Unused SerDes physical links can be switched off to reduce power consumption, while controllable SerDes outputs allow system software to tune operating conditions. The switch architecture supports flexible port configurations, virtual-channel traffic separation, and scalable aggregation without relying on an external switch fabric for each endpoint connection. Typical deployments include communications platforms, embedded systems, backplane aggregation, industrial controllers, test equipment, and servers that need additional PCIe endpoints. The eight-port capability makes it useful where several endpoint types, link widths, or downstream devices must share a compact host interface while retaining deterministic low-latency routing. Design the PCB with the manufacturer’s 196-PBGA land pattern, high-speed differential routing rules, reference-plane continuity, and decoupling recommendations. Validate lane configuration, firmware or register programming, auxiliary power sequencing, and thermal performance across the intended traffic profile before production release. The exact pin assignments and electrical limits must be taken from the pin-description table in the manufacturer datasheet. This page consolidates the official product architecture, package information, Gen 2 link capability, application fit, and practical implementation considerations. It also distinguishes confirmed drop-in coverage from broad functional equivalents, helping engineers determine whether a candidate can be soldered onto the same PCB land pattern rather than merely serving a similar PCIe-switch function.

RFQ پەیوەندی
PEX8609-BA50BC - 8-Lane 8-Port PCIe Switch | Broadcom
PEX8609-BA50BC

PEX8609-BA50BC - 8-Lane 8-Port PCIe Switch | Broadcom

Broadcom PEX8609-BA50BC is an eight-lane, eight-port PCI Express switch integrated in a 196-ball PBGA package measuring 15 x 15 mm. It provides an integrated 5.0 GT/s SerDes interface, configurable PCIe ports, and typical power consumption of 1.60 W. The device is designed for systems that need to fan out PCIe connectivity while maintaining a Gen 2-class serial interface. A PCI Express switch is a semiconductor that bridges one host or upstream PCIe link with multiple downstream endpoints. It belongs to the interface IC hierarchy, where PCIe controllers and switches manage high-speed serial data transfer between processors, adapters, storage devices, and expansion cards. The PEX8609 is intended to expand connectivity in systems where direct routing from a root complex to every endpoint would be impractical. The PEX8609 supports up to eight configurable ports and provides eight integrated SerDes channels operating at 5.0 GT/s. Its feature set includes support for Access Control and compatibility with PCI Express Base Specification 2.0, including backward compatibility with PCIe 1.0a and 1.1. PCI Power Management Specification 1.2 support is also identified for the device, enabling participation in system power-management states. The PEX8609-BA50BC combines a multiport switching architecture with a compact 196-ball PBGA package. Its 15 x 15 mm body supports compact embedded and expansion systems, while the exposed-ball construction facilitates board-level routing and inspection under assembly processes designed for fine-pitch BGAs. The listed typical power of 1.60 W makes power budgeting an important part of switch-board design. Typical applications include PCI Express storage enclosures, multi-port accelerator systems, embedded computing platforms, carrier boards, and host systems that must connect several PCIe endpoint devices through a single upstream link. The eight configurable ports can simplify system topology when endpoint discovery, peer-to-peer routing, or downstream fan-out is required. Layout should prioritize short, impedance-controlled SerDes connections, solid reference-plane continuity, and clean separation between high-speed and power-return paths. Thermal design should account for the 1.60 W typical device power together with adjacent circuitry. Decoupling and power-distribution networks should follow the layout and capacitor guidance in the manufacturer data book. This product record combines the manufacturer data-book characteristics with practical application, package, comparison, and design guidance. It also highlights the limits of drop-in sourcing: only the closely related PEX8609-BA50BI G was identified with sufficient evidence to describe a same-package replacement, while generic cross-reference tools did not establish additional pin-compatible devices.

RFQ پەیوەندی
PEX8609-BA50BI - 8-Lane 8-Port PCIe 2.0 Switch | Broadcom
PEX8609-BA50BI

PEX8609-BA50BI - 8-Lane 8-Port PCIe 2.0 Switch | Broadcom

Broadcom PEX8609-BA50BI is an eight-lane, eight-port PCI Express switch IC supporting PCIe 2.0, with a maximum data rate of 4.0 GB/s and a listed power value of 1.60 W. The device is identified in a 196-pin PBGA package measuring 15 x 15 mm and is categorized as a PCI Express switch with DMA capability. Its position within the PCI Express interface hierarchy makes it suitable for systems that require one upstream PCI Express link to be expanded across multiple downstream endpoints. A PCI Express switch is a semiconductor that manages point-to-point serial links between a host or root complex and one or more peripherals. Unlike a conventional parallel bus switch, a PCIe switch operates with serialized differential lanes and transaction-based packet transfer. The PEX8609 combines eight lanes and eight ports in one integrated device, allowing compatible endpoints to share a higher-level interconnect while each link retains protocol-managed flow control and configuration through PCIe. The principal identified features are PCIe 2.0 operation, support for eight lanes, eight ports, a 4.0 GB/s maximum data rate, and DMA functionality. These characteristics place the PEX8609 in the PCI Express interface IC category. Its 196-PBGA package is intended for dense system-level implementations where the number of routing connections and the need for high-speed differential signaling make a fine-pitch BGA assembly practical. PEX8609-BA50BI is associated with the Broadcom PEX 8609 product family and a flexible eight-lane, eight-port PCI Express architecture. The product overview describes the PEX 8609 as a PCIe switch with advanced capabilities. DMA support can reduce the involvement of the host processor in data movement when the surrounding system is designed around the device's transfer capabilities, although actual throughput depends on lane width, payload size, reference clocking, and peer-device behavior. Typical system roles include embedded computing platforms, storage systems, industrial controllers, test equipment, and networked edge systems that need several PCIe endpoints behind one host interface. The device is also relevant to add-in cards and embedded modules using a dense BGA footprint. These uses benefit from consolidating multiple downstream links into one switch rather than requiring separate root ports for every peripheral. Board design requires careful high-speed signal-integrity control, uninterrupted reference-clock distribution, solid power and ground planes, and BGA-package assembly capability. The 196-pin land pattern must be implemented exactly from the manufacturer's package drawing, including ball assignments, solder-mask details, and via geometry. Validate signal losses, connector and trace discontinuities, inter-pair skew, and power-plane return paths before production release. This product summary combines the documented PCIe architecture and package characteristics with practical design guidance for evaluating the PEX8609 in multi-endpoint systems. The page also distinguishes the exact catalog identifier from related spellings, clarifies where to obtain technical documents, and records practical sourcing and replacement questions that should be resolved before schematic and PCB sign-off.

RFQ پەیوەندی
PEX8612-BB50RBCF - 12-Lane PCIe 2.0 Switch | Broadcom
PEX8612-BB50RBCF

PEX8612-BB50RBCF - 12-Lane PCIe 2.0 Switch | Broadcom

Broadcom PEX8612-BB50RBCF is a 12-lane, 3-port PCI Express Gen 2 switching IC with integrated 5.0 GT/s SerDes, supplied in a 324-ball FCBGA package measuring 19 x 19 mm. The device supports a commercial temperature grade and is identified as a CMOS PCI bus controller with ball terminals and a square package. A PCI Express switch is a semiconductor device that routes high-speed serial lanes between a host or upstream endpoint and multiple downstream endpoints. Within the interface hierarchy, the PEX8612 belongs to the PCI Express switch-controller family, using lane switching to expand connectivity without adding a separate host bridge. This makes it useful where multiple PCIe devices must share a limited upstream link or where expansion and fabric-management functions are required. Key features include support for 12 PCIe lanes, three ports, PCIe Gen 2 operation, integrated 5.0 GT/s serializers and deserializers, and typical power dissipation of 1.5 W. The 324-ball FCBGA package supports compact, high-density server and embedded-system designs. Its I2C technology designation provides a management interface, while the lead-free construction and RoHS features align with modern environmental requirements. The PEX8612 architecture consolidates multiple PCIe links into a switching fabric and allows downstream devices to operate behind a common upstream connection. Integrated SerDes reduces the need for external transceiver circuitry, while the compact BGA footprint supports high-density routing on multilayer boards. Because the device has 324 terminals, PCB design must include careful ball assignment, power distribution, and high-speed signal-integrity work. Typical applications include server expansion, storage systems, embedded computing platforms, industrial controllers, and networked edge equipment. In each case, the switch provides a practical way to add PCIe endpoint connectivity while preserving the 5.0 GT/s PCIe Gen 2 signaling rate. The three-port arrangement is particularly relevant to systems connecting several NVMe, network, or accelerator devices behind a single host interface. Board layout is the main implementation constraint. High-speed differential pairs require controlled impedance, uninterrupted reference planes, minimal layer transitions, and careful separation from clock and switching-node energy. Thermal design must also accommodate the typical 1.5 W device dissipation while maintaining adequate spreader and via access beneath the BGA. This page consolidates the confirmed lane, port, signaling, package, power, and environmental characteristics into an engineering-oriented view of the PEX8612-BB50RBCF. It also distinguishes the available ordering variants and explains the practical checks required before treating one as a replacement for another.

RFQ پەیوەندی
PEX8613-BA50BC - PCIe 2.0 12-Lane 3-Port Switch | Broadcom
PEX8613-BA50BC

PEX8613-BA50BC - PCIe 2.0 12-Lane 3-Port Switch | Broadcom

Broadcom PEX8613-BA50BC is a PCI Express switch IC with 12 PCIe Gen 2 lanes, a 5.0 GT/s data rate, and three switch ports in a 324-ball PBGA package measuring 19 x 19 mm. It is designed for systems that need to fan out a PCIe host connection among multiple downstream endpoints while preserving backward compatibility with PCIe Gen 1 devices. A PCI Express switch is a specialized interface semiconductor that belongs to the PCIe fabric-switch and interface-IC hierarchy. It manages transaction routing between a root port, an upstream endpoint, and downstream endpoints using configurable lanes and ports. The PEX8613 supports PCI Express Base Specification 2.0 compliance, automatic lane negotiation, lane reversal, and polarity reversal, allowing it to interoperate with systems containing different PCIe generation capabilities. The primary architecture provides a 12-lane, three-port PCIe Gen 2 configuration operating at up to 5.0 GT/s per lane. Backward compatibility with PCI Express Base Specification 1.1 and 1.0a allows a Gen 2 native chipset to fan out to endpoints that operate at Gen 1 rates. Lane reversal and polarity reversal support simplify integration where board routing constraints prevent conventional lane order or transmit/receive polarity from matching directly. The device is intended for PCI Express Base Specification 2.0 systems and was designed for Microsoft Vista compliance. Its switch function consolidates multiple downstream links behind a shared upstream connection, reducing the need for separate host-to-endpoint routing paths. Detailed lane allocation, reference-clock requirements, power sequencing, and register behavior should be confirmed against the PEX 8613 Product Brief when laying out the system. Typical uses include multi-endpoint embedded systems, industrial controller platforms, test and measurement equipment, storage systems, and compact computing products that require a PCIe switch rather than a simple root port. A system integrator can place the switch between a root complex and several endpoint devices, provided the selected downstream devices are supported by the port and lane organization of the PEX8613. PCB implementation requires careful high-speed signal routing and a 324-ball PBGA land pattern. Differential PCIe pairs should follow the reference-design connectivity and impedance requirements, while power, ground, and decoupling connections should be implemented with the shortest practical return paths. The PCB footprint and ball assignment must be checked against the package drawing before symbol and layout release. This product record combines the documented PCIe generation, lane count, port count, data rate, backward-compatibility features, package format, and sourcing details with practical implementation guidance. It also distinguishes exact-ordering-code alternatives from broader PCIe switches that require pinout, firmware, or board-level verification before replacement.

RFQ پەیوەندی
PEX8613-BA50BI - 12-Lane PCIe Gen 2 Switch | Broadcom
PEX8613-BA50BI

PEX8613-BA50BI - 12-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8613-BA50BI is a PCI Express Gen 2 switch IC with 12 lanes, 3 ports, and a maximum link rate of 5.0 GT/s. The device is intended for systems that require multiple PCI Express links to be switched between a host or endpoint and downstream devices. It supports the PCI Express Base Specification r2.0 and is backward compatible with r1.1 and r1.0a, providing a practical migration path for systems built around earlier-generation PCI Express designs. A PCI Express switch is a semiconductor in the interface-IC and semiconductor hierarchy that routes high-speed serial transactions among a root complex, endpoint devices, and expansion adapters. Unlike a simple connector or protocol translator, the PEX8613 integrates lane management, configuration handling, buffering, and traffic steering so that multiple PCI Express links can share a system interconnect. Its three-port architecture allows designers to construct fanout arrangements for storage, networking, graphics, or accelerator cards. Key features include support for auto-negotiation, lane reversal, and polarity reversal. Auto-negotiation permits the switch and connected devices to establish the highest mutually supported link rate and width. Lane reversal supports boards whose routing differs from the conventional lane order, while polarity reversal assists compatibility with interconnect implementations that invert the receiver and transmitter signals. These features can simplify board-level integration and improve tolerance of routing or cable-related signal variations. The manufacturer product brief identifies the PEX 8613 as a fully compliant PCI Express Base Specification r2.0 device and states that it is backward compatible with r1.1 and r1.0a. It was also designed for Microsoft Vista compliance, an important historical system requirement at the time of introduction. These compatibility features broaden its usefulness in legacy industrial, communications, and embedded platforms that need centralized PCI Express switching rather than a modern host-bridged topology. Typical applications include PCI Express expansion systems, multi-device embedded controllers, storage and networking adapters, industrial equipment with multiple high-speed peripherals, and compact backplane systems. The 12-lane, 3-port arrangement is useful when a system must balance bandwidth across several links while preserving backward compatibility with older endpoint hardware. The industrial-temperature ordering also makes the device relevant to equipment where ambient temperature requirements exceed ordinary commercial operating limits. Designers should use the manufacturer pin-description and reference-material sections when assigning the 324-pin ball-grid-array connections and PCB footprint details. Preserve the documented lane and reference-clock assignments, provide the required power rails with appropriate decoupling, and validate signal-integrity, thermal, and PCIe compliance behavior at the intended link rate before production release. This page organizes the PEX8613-BA50BI specifications, sourcing questions, compatibility details, application guidance, and the confirmed PEX8613-BA50BCG same-family alternative. It also distinguishes documented capabilities from parameters that must be confirmed in the complete manufacturer datasheet before schematic release or production qualification.

RFQ پەیوەندی
PEX8614-BA50BC - 12-Port Gen 2 PCIe Switch | Broadcom
PEX8614-BA50BC

PEX8614-BA50BC - 12-Port Gen 2 PCIe Switch | Broadcom

Broadcom PEX8614-BA50BC is a PCI Express switch IC with 12 lanes, 12 ports, and PCIe Gen 2 operation, housed in a 324-contact HSBGA package measuring 19 mm by 19 mm. It is designed to fan out multiple PCIe links through a non-blocking internal switch architecture and supports full line-rate packet transfer. Broadcom documents a maximum packet cut-through latency of 140 ns in an x4-to-x1 configuration, making the device suitable for latency-sensitive communication, server, and storage systems. A PCIe switch belongs to the PCI Interface IC category within interface semiconductors. Its function is to connect a host or upstream PCIe device to multiple downstream endpoints while arbitrating transactions, maintaining protocol ordering, and providing a shared switching fabric. The PEX8614 family supports lane configurations that allow system designers to balance port count, bandwidth, packaging, and board-routing requirements across complex PCIe topologies. Key characteristics include 12 PCIe lanes, 12 switch ports, PCIe Gen 2 operation, a 324-ball HSBGA package, and a 19 mm by 19 mm package footprint. The device also provides a non-blocking internal architecture and supports packet cut-through. These features make it applicable where several PCIe links need consolidation behind a common switching point rather than direct host-to-endpoint routing. The PEX8614 architecture uses packet cut-through to minimize the time packets remain inside the switch. Broadcom specifies a maximum latency of 140 ns for the x4-to-x1 arrangement and combines this behavior with large packet memory. The resulting architecture can sustain full line-rate operation across ports while supporting low-latency communication and server workloads that benefit from shorter transaction paths. Typical uses include PCIe expansion systems, external storage appliances, high-bandwidth network equipment, server accelerator platforms, and embedded systems that require more downstream PCIe endpoints than the root complex supports. The 12-lane, 12-port organization is particularly useful when a backplane or system controller must route multiple device links while preserving deterministic packet delivery. Board design requires careful high-speed signal-integrity work, including controlled impedance routing, continuous reference planes, appropriate via transitions, and minimization of stubs. Power delivery, decoupling, and thermal management must also be designed around the dense 324-contact HSBGA package. Differential-pair routing and connector or package-transition losses should be evaluated as part of the complete PCIe channel budget. This product record combines the identified PCIe architecture, package, lane, port, latency, and ordering details with application guidance, engineering caveats, and a structured comparison framework. It is intended to help engineers confirm fit, plan routing and power delivery, and determine whether a replacement or redesign is necessary before committing a complex PCIe board to production.

RFQ پەیوەندی
PEX8615-BA50BC - 12-Lane Gen2 PCIe Switch | Broadcom
PEX8615-BA50BC

PEX8615-BA50BC - 12-Lane Gen2 PCIe Switch | Broadcom

Broadcom PEX8615-BA50BC is a 12-lane, 12-port PCI Express Gen2 switch with DMA in a 324-HSBGA 19 x 19 mm package. It operates from a 1.0 V core supply and supports PCIe hot-plug, power management, Quality of Service, and traffic management functions. A PCI Express switch is a semiconductor device that connects a PCIe host or upstream endpoint to multiple downstream endpoints while dividing available lane bandwidth among connected devices. The PEX8615 belongs to the PCIe switch hierarchy: PCI Express interface IC, fabric switch, interface controller, and semiconductor. Its multiport architecture consolidates expansion traffic into a single host interface, reducing the number of independent adapters required in systems with several PCIe devices. The defining characteristics of the PEX8615-BA50BC are its 12-lane Gen2 capability, 12 downstream ports, integrated DMA, and 1.0 V core voltage. Gen2 operation corresponds to a maximum PCIe data rate of 5 GT/s per lane. The broad feature set also includes hot-plug support and configurable power management, which are important in workstation, server, storage, and embedded systems where devices may be added, removed, or placed into reduced-power states. At the architecture level, the switch provides a central PCIe routing point and supports Quality of Service and traffic management to help control data movement among endpoints. These functions are particularly useful when several devices access shared upstream bandwidth. The DMA function can transfer data without requiring every transfer to pass through a host processor, making the switch applicable to systems that need high-throughput I/O consolidation and controlled data flow. Typical uses include multi-Gigabit network adapters, RAID and storage controllers, accelerator cards, capture equipment, and industrial PCIe expansion systems. The 324-HSBGA package provides the dense interconnect required by a 12-lane, 12-port switching fabric. Because the package and signal interface are complex, layout, power delivery, reference clocking, and connector-side signal integrity require careful validation against the manufacturer datasheet. Designers should preserve the required PCIe lane and reference-clock topology, provide clean 1.0 V core power, and observe all package-ball, decoupling, and thermal requirements. The PEX8615-BA50BC is listed as obsolete in a distributor result, so new production designs should confirm lifecycle status and obtain the latest manufacturer documentation before committing the part to an active design. This product summary combines the verified PCIe switch characteristics, package details, lifecycle information, and technical replacement guidance into an engineering-focused resource for architecture selection, PCB planning, sourcing review, and legacy-system maintenance.

RFQ پەیوەندی
PEX8615-BA50BI - 12-Port PCIe Gen 2 Switch | Broadcom
PEX8615-BA50BI

PEX8615-BA50BI - 12-Port PCIe Gen 2 Switch | Broadcom

Broadcom PEX8615-BA50BI is a PCI Express switch IC providing 12 PCIe lanes and 12 ports for Gen 2 systems, with DMA support, in a 324-HSBGA package measuring 19 x 19 mm. Its combination of multiport switching, lane-management capability, and a high-pin-count ball-grid package makes it suitable for complex embedded computing, storage, networking, and industrial data-transfer systems where one host must fan out to multiple PCIe endpoints. A PCI Express switch is a semiconductor device that routes PCI Express traffic between a host controller and one or more downstream endpoints. It belongs to the broader interface-controller hierarchy: PCIe switch, interface IC, semiconductor, and system interconnect. The PEX8615-BA50BI is designed for systems requiring multiple Gen 2 links rather than a simple point-to-point interface, allowing multiple peripherals or storage controllers to share a host-facing PCIe connection through switch-managed traffic paths. The primary documented characteristics include 12 lanes, 12 ports, PCI Express Gen 2 operation, and DMA support. These features are important in designs that need more endpoint connectivity than the host interface can provide directly. The 324-HSBGA package supports the large number of power, ground, high-speed I/O, control, and configuration connections normally associated with a multiport PCIe switching device, while its 19 x 19 mm body accommodates substantial interconnect and power-delivery requirements. The switch architecture separates upstream host connectivity from downstream endpoint-facing ports and manages multiple PCIe lanes across the fabric. DMA support can improve data-transfer architecture by allowing appropriate devices to transfer data without requiring every movement to be serviced solely through a host processor. Exact lane allocation, supported downstream configurations, reference-clock requirements, reset behavior, power-management states, and maximum aggregate data-transfer characteristics should be confirmed against the manufacturer datasheet before final system design. Typical uses include embedded server and industrial-computer backplanes, multi-controller storage systems, PCI Express expansion chassis, data-acquisition systems, network appliances, and test equipment that must connect several PCIe devices to one platform. In these applications, the switch reduces the number of independent host roots needed while preserving the PCIe topology required by downstream cards. PCB implementation requires careful treatment of the 324-ball HSBGA footprint and the high-speed PCIe channels. Maintain the reference-controlled impedance and via geometry specified for the design stack-up, place decoupling and power-distribution structures close to the relevant supply pins, and follow the manufacturer’s ball-reference and reference-design guidance. Clock, reset, enumeration, and auxiliary power sequencing must also be implemented according to the platform PCIe requirements. This product summary consolidates the known lane, port, generation, DMA, package, and sourcing information while highlighting the implementation decisions that distinguish a workable PCIe switch design from a mechanically and electrically compliant one. For a new design, use the official Broadcom documentation for authoritative electrical limits, pin assignments, initialization procedures, and layout constraints.

RFQ پەیوەندی
PEX8616-BB50RBCF - PCIe Gen 2 16-Lane 4-Port Switch
PEX8616-BB50RBCF

PEX8616-BB50RBCF - PCIe Gen 2 16-Lane 4-Port Switch

The Broadcom PEX8616-BB50RBCF is a PCI Express Gen 2 switch IC with 16 lanes, four ports, 5.0 GT/s signaling, and 324 terminals in a 19 mm by 19 mm FCBGA package. It expands a PCI Express host interface into multiple downstream links for systems requiring more endpoint connectivity than a root complex can provide directly. A PCI Express switch is a multiport interface IC that routes high-speed serial transactions between a root complex, endpoints, and other switches. It sits within the PCI Express hierarchy between a host or fabric and downstream devices, adding fanout, peer-to-peer routing, and configurable traffic management while preserving the layered PCIe protocol structure. The BB silicon revision supports four PCIe Gen 2 ports and an aggregate configuration of 16 lanes. Signaling at 5.0 GT/s provides a nominal 500 MB/s payload bandwidth per direction on each Gen 2 lane. The 324-FCBGA package places the high-speed, power, ground, and auxiliary interfaces on a dense square land pattern that requires multilayer PCB construction and careful signal-integrity design. The Broadcom PEX 8616 data book covers AA, AB, and BB silicon revisions, with production information centered on revision BB. Its documentation includes the ExpressLane architecture, configuration mechanisms, ordering information, electrical characteristics, reference designs, and application guidance needed to evaluate the switch in server, storage, accelerator, and embedded PCIe systems. Typical uses include expanding a PCIe root port into four downstream links, connecting storage controllers to a host processor, supporting accelerator or network cards in multi-device chassis, and building server backplane fabrics. Exact port configuration and lane allocation must satisfy the device's supported partitioning rules and the electrical requirements of the selected system architecture. PCB implementation is the main design consideration. A 324-ball FCBGA requires escape routing through inner layers, length matching for high-speed differential pairs, continuous reference planes, and careful power and ground distribution. Follow the Broadcom reference design for layer count, decoupling, connector geometry, trace widths, and via structures instead of deriving these details from general ball-grid-array practice. This product overview combines the verified device identity, architecture, package details, sourcing links, drop-in family options, and practical implementation guidance. It also organizes the most useful PEX8616-BB50RBCF datasheet, pinout, equivalent, replacement, comparison, and application information into a design-focused reference for PCI Express engineers.

RFQ پەیوەندی
PEX8617-BA50BC - 16-Lane 4-Port PCIe Switch | Broadcom
PEX8617-BA50BC

PEX8617-BA50BC - 16-Lane 4-Port PCIe Switch | Broadcom

The Broadcom PEX8617-BA50BC is a PCI Express switch IC with 16 PCIe lanes, 4 ports, and PCI Express Gen 2 support, packaged in a 324-pin PBGA measuring 19 x 19 mm. It is designed for systems that need to fan out PCIe connectivity between a host or upstream device and multiple downstream endpoints. A PCI Express switch is a semiconductor device that manages traffic between a PCI Express upstream port and multiple downstream ports. This switch belongs to the PCIe switch family within interface ICs, semiconductor bridges, and connectivity controllers. Its multiport architecture allows storage controllers, network adapters, accelerators, and other peripherals to share a PCIe link while retaining independent downstream paths. The principal published characteristics are 16 PCIe lanes, 4 ports, and PCIe Gen 2 operation. The physical implementation is a 324-pin PBGA with a 19 x 19 mm body. Because the device uses a large ball-grid array, its footprint, escape-routing strategy, layer count, and power-delivery network must be planned as a high-density PCB design rather than treated as a conventional perimeter package. The four-port topology supports systems in which several endpoint devices must communicate through a centralized PCIe fabric. Compared with a point-to-point bridge, a switch provides a scalable internal routing fabric and can reduce the need for separate host controllers when endpoint traffic does not require dedicated links. Detailed link-width, lane-direction, reference-clock, and configuration behavior should be confirmed in the manufacturer datasheet before schematic sign-off. Typical uses include PCIe expansion systems, embedded servers, storage platforms, industrial controllers, test equipment, and accelerator platforms. The PEX8617-BA50BC is also suited to designs that must consolidate several downstream PCIe devices behind one upstream connection. Firmware, endpoint drivers, and system-level topology must be validated together because the switch changes the PCIe enumeration and routing model. For PCB implementation, follow the manufacturer land pattern, ball-map, and reference-design guidance exactly. Provide clean power rails, decouple each supply according to the recommended network, route high-speed differential pairs with matched impedance, and keep the 324-ball escape routing as short and symmetric as practical. Pay particular attention to via stubs, layer transitions, and return-path continuity. This page consolidates the published switch topology and package information, organizes verified sourcing links, and adds practical implementation guidance beyond a basic distributor listing. It also distinguishes documented characteristics from electrical details that still require confirmation from the manufacturer datasheet.

RFQ پەیوەندی
PEX8618-BA50BC - 16-Lane Gen 2 PCIe Switch | Broadcom
PEX8618-BA50BC

PEX8618-BA50BC - 16-Lane Gen 2 PCIe Switch | Broadcom

Broadcom PEX8618-BA50BC is a PCI Express switch IC with 16 lanes, 16 ports, and PCI Express Gen 2 operation, packaged in a 324-pin HSBGA measuring 19 x 19 mm. It is designed for systems that need a configurable PCIe switching fabric capable of supporting multiple downstream links while maintaining compatibility with earlier PCI Express generations. A PCIe switch is an interface IC that routes high-speed serial transactions between a host or upstream endpoint and multiple downstream devices or adapters. As part of the broader PCIe interface hierarchy, it performs link training, lane-width coordination, flow control, and transaction forwarding. This role places it between PCI Express endpoints and system fabric controllers, making it useful in servers, storage systems, embedded platforms, and expansion systems. The switch's principal characteristics include 16 PCIe lanes, 16 ports, and PCI Express Gen 2 operation. Each port supports auto-negotiation, lane reversal, and polarity reversal, improving deployment flexibility when board-routing constraints affect lane order or signal polarity. Broadcom also documents compliance with the PCI Express Base Specification 2.0 and backward compatibility with versions 1.1 and 1.0a. PEX8618-BA50BC is identified as obsolete, so its technical role is best understood through legacy PCI Express system designs rather than new product platforms. The 324-HSBGA package creates a substantial pin-count and layout challenge because high-speed differential routing, supply distribution, reference-clock connections, and auxiliary signals must be assigned across a fine-pitch BGA land pattern. Pin assignment and ball mapping should therefore be checked directly against the Broadcom pinout and reference design. Typical uses include multiport storage controllers, PCI Express expansion chassis, server backplanes, industrial computing systems, and test equipment that fans a host connection into several downstream links. In such systems, the switch can reduce the number of direct host interfaces required while preserving a consistent PCIe topology. Application suitability depends on lane budget, port configuration, reference-clock requirements, firmware support, thermal performance, and the availability of a supported board design. For new designs, confirm device lifecycle status, pin compatibility, and the exact package land pattern before committing the PCB. A replacement should be selected only after its ball map, lane assignments, power rails, reference clock, configuration interface, and firmware behavior have been compared with the original PEX8618 implementation. The same package outline alone is not sufficient to establish drop-in compatibility. This page consolidates the confirmed lane, port, generation, package, lifecycle, and interoperability characteristics of the PEX8618-BA50BC, then adds practical PCB considerations, legacy application guidance, and an explicit drop-in assessment. It also separates functional PCIe switching options from true pin-compatible replacements to help engineers avoid adopting a mechanically similar but electrically incompatible substitute.

RFQ پەیوەندی
PEX8619-BA50BC - 16-Lane Gen2 PCIe Switch | Broadcom
PEX8619-BA50BC

PEX8619-BA50BC - 16-Lane Gen2 PCIe Switch | Broadcom

The Broadcom PEX8619-BA50BC is a PCI Express switch integrated circuit with 16 lanes and 16 ports, designed for PCIe Gen2 system designs and intelligent I/O expansion. It is listed in a 324-HSBGA package measuring 19 mm by 19 mm. The device is identified as a flexible and versatile PCI Express switch and is associated with DMA capability, making it suitable for systems that need multiple PCIe endpoints connected through a centralized switching fabric. A PCI Express switch is a semiconductor device that expands one PCIe host interface into multiple downstream ports. The switch belongs to the broader hierarchy of PCI Express interface controllers, interface ICs, and semiconductor components. In a server, storage, industrial, or embedded system, it can aggregate PCIe devices behind a host controller while providing configurable routing between ports. The PEX8619-BA50BC is positioned for designs requiring more PCIe connectivity than a conventional endpoint controller can provide. The PEX8619-BA50BC provides a 16-lane, 16-port PCIe Gen2 switching solution with DMA support. Its lane and port counts provide the main system-level value: designers can connect multiple PCIe devices, use multi-lane links, or create a switching topology for embedded and control-plane equipment. The Broadcom listing also identifies the component as an intelligent I/O interface, reflecting its role as a traffic-management element between a PCIe host and peripheral devices. The physical implementation uses a 324-HSBGA package with a 19 mm by 19 mm body. HSBGA is a high-density ball-grid-array package intended for complex interface ICs with many signal and power connections. Package construction affects PCB layout through dense escape routing, power-plane integrity, thermal management, and assembly complexity, so the manufacturer package drawing should be used for land-pattern and ball-assignment decisions. Typical applications include PCIe expansion in embedded systems, control-plane processing, intelligent I/O backplanes, storage aggregation, and industrial equipment with multiple accelerator or interface cards. For these applications, the 16-port arrangement can simplify chassis topology compared with a collection of discrete bridges, while DMA functionality can support efficient data movement between PCIe devices. Designers should verify lane-width configuration, port routing, reference-clock requirements, reset behavior, power sequencing, and platform-specific reference design guidance against the manufacturer documentation. A PCIe switch also requires careful power delivery and signal-integrity planning across long traces, connectors, and retimers or repeaters where applicable. Do not substitute a functional PCIe switch for this MPN without confirming package compatibility, electrical limits, firmware support, and the complete port map. This product page consolidates the identified switch configuration, package information, sourcing references, comparison fields, and practical integration considerations into one engineering-focused record.

RFQ پەیوەندی
PEX8619-BA50BI - 16-Lane PCIe Gen 2 Switch | Broadcom
PEX8619-BA50BI

PEX8619-BA50BI - 16-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8619-BA50BI is a PCI Express Gen 2 switching semiconductor with 16 PCIe lanes, 16 ports, and integrated DMA functionality in a 324-ball HSBGA package measuring 19 mm by 19 mm. It is designed for systems that need to fan out PCIe connectivity among multiple endpoints while preserving the shared bandwidth available from a Gen 2 x16 link. A PCIe switch is a semiconductor in the interface IC hierarchy that routes PCI Express transactions between a root complex or host bridge and multiple downstream devices. A Gen 2 PCIe link provides a 5 GT/s signaling rate per lane, while lane width determines the aggregate theoretical bandwidth of an individual link. The PEX8619-BA50BI combines multi-port switching and DMA capabilities to support complex embedded and control-plane architectures. Key product characteristics include support for 16 PCIe lanes and 16 ports, Gen 2 operation, and DMA. The Broadcom listing identifies a 324-HSBGA package with a 19 mm by 19 mm body. The package is intended for high-density board layouts in which careful ball assignment, reference-plane continuity, power distribution, and thermal management are essential. The integrated switching fabric provides a central point for organizing multiple PCIe links in embedded systems, storage appliances, industrial controllers, and test equipment. DMA capability can move data between memory and PCIe devices, helping distribute transfer work between the host processor and dedicated DMA engines. The exact supported topology, endpoint bifurcation, completion ordering, and operating modes should be confirmed against the manufacturer documentation before final system configuration. Typical uses include PCIe expansion in embedded control systems, multi-device test platforms, data-acquisition equipment, storage controllers, and industrial communication systems. Because the device exposes many lanes and ports, board design must account for connector placement, lane routing, clock distribution, auxiliary-power sequencing, and the high pin count of the HSBGA package. Design planning should begin with lane budget, topology, firmware support, and package-level power delivery rather than treating the switch as a conventional discrete component. Reference-plane continuity and short high-speed routes are necessary for predictable PCIe performance, while thermal analysis should cover both local junction heating and the effect of adjacent board components. This product page combines package, interface, application, and replacement information into a design-focused reference for engineers evaluating the PEX8619-BA50BI. It also identifies the limits of the available evidence: complete ball assignments, electrical characteristics, supported feature combinations, and lifecycle details must be verified through Broadcom documentation and approved sourcing channels.

RFQ پەیوەندی
PEX8624-BB50RBCF - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBCF

PEX8624-BB50RBCF - 24-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8624-BB50RBCF is a 24-lane, six-port PCI Express Gen 2 switch IC with a 5.0 GT/s data rate, supplied in a 324-ball FCBGA package measuring 19 mm by 19 mm. The device provides a high-bandwidth PCIe switching solution for systems that need to aggregate, route, or fan out multiple PCI Express links while preserving the electrical and logical behavior expected from a Gen 2 fabric. A PCI Express switch belongs to the interface-controller hierarchy and manages transaction routing between a root complex or upstream port and multiple downstream endpoints. Within the broader semiconductor category, the PEX8624 combines a PCIe switch fabric, port-level interface functions, configuration handling, reference-clock distribution, and power-management features in one high-ball-count package. This integration reduces the number of discrete interface devices required in complex embedded platforms. The most prominent operating characteristics are its 24 PCIe lanes, six ports, and PCIe Gen 2 data rate of 5.0 GT/s. The 324-ball FCBGA package supports dense high-speed routing on multilayer PCBs, while its commercial temperature grade targets equipment operating within commercial environmental limits. The part is categorized as a PCI bus controller and PCIe interface IC rather than a conventional analog switch or digital logic device. The PEX8624 architecture is intended for systems requiring more connectivity than a single root port can directly provide. Each supported link must comply with PCIe signal-integrity, reference-clock, configuration, reset, and power-sequencing requirements. Designers must preserve the High-Speed differential routing rules, provide suitable decoupling, and verify connector, cable, and endpoint compatibility across the complete system. Typical uses include industrial host systems, external storage controllers, test equipment, embedded computing platforms, and networked appliances that need multiple PCIe endpoints behind one host interface. Its 24-lane capacity is useful when several devices, such as NVMe controllers, Ethernet adapters, capture cards, or acceleration modules, share a chassis. Exact lane allocation and usable bandwidth depend on port configuration and the physical topology implemented on the motherboard. A critical design consideration is that the 19 mm by 19 mm FCBGA requires a dense multilayer board with short High-Speed traces, matched reference planes, and uninterrupted return paths. The layout should follow the Broadcom reference design and data book for ball assignment, reference-clock routing, power configuration, reset behavior, and connector pin mapping before schematic capture is finalized. This page combines the core device identity, package characteristics, application guidance, pricing workflow, and family-level replacement information into a practical engineering reference. It also identifies which electrical, timing, thermal, and pin-level details still require direct confirmation from the manufacturer data book before layout release or production qualification.

RFQ پەیوەندی
PEX8624-BB50RBIF - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBIF

PEX8624-BB50RBIF - 24-Lane PCIe Gen 2 Switch | Broadcom

Broadcom PEX8624-BB50RBIF is a 24-lane, six-port PCI Express Gen 2 switch operating at 5.0 GT/s, packaged in a 324-FCBGA square ball grid array measuring 19 x 19 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving the five-gigatransfers-per-second performance of a Gen 2 endpoint or host interface. A PCI Express switch is a multiport interface IC that connects one upstream host-facing port to multiple downstream ports. Within the PCI Express hierarchy, the PEX8624 belongs to the bridge and switch class of system interconnect devices. It routes ordered transaction layers between a root complex or another switch and attached endpoint devices, allowing storage, networking, accelerator, and capture cards to share a host PCIe slot. The device provides 24 PCI Express lanes, six switch ports, and a 5.0 GT/s data rate. Its 324-FCBGA package uses a square 19 x 19 mm outline and a fine-pitch ball-grid layout. The high pin count reflects the simultaneous assignment of lane transmitters and receivers, auxiliary signaling, reference-clock connections, power rails, control interfaces, and configuration pins required by a multiport PCIe switch. PEX8624-BB50RBIF is intended for Gen 2 designs rather than higher-speed Gen 3 or Gen 4 fabrics. At 5.0 GT/s, each lane carries one bit per transfer cycle before line coding and protocol overhead are considered. The six-port topology gives system architects a way to consolidate several PCIe endpoint connections behind a common upstream interface while maintaining deterministic peer-to-peer routing support. Typical uses include PCIe expansion systems, industrial data-acquisition chassis, high-bandwidth network appliances, external storage controllers, test and measurement platforms, and GPU or FPGA accelerator systems. In these applications, the switch can reduce host-controller scarcity and provide a structured path between multiple endpoint types without redesigning the mechanical enclosure around several discrete adapters. PCB implementation is the dominant engineering consideration. A 324-FCBGA device requires a fine-pitch land pattern, multilayer PCB construction, controlled impedance routing, solid reference planes, and careful power and ground-plane distribution. The differential PCIe pairs should be routed as length-matched transmission lines with minimal stubs and layer transitions, while the reference clock and PERST# sequencing require deliberate system-level planning. This page consolidates the confirmed lane count, port count, transfer rate, package outline, sourcing constraints, and practical implementation considerations for PEX8624-BB50RBIF. For a new layout, use the Broadcom PEX8624 datasheet and reference design to validate the complete ball map, power architecture, clock topology, connector assignments, and PCIe training sequence before releasing fabrication files.

RFQ پەیوەندی
PEX8624-BB50RBIG - 24-Lane PCIe Gen 2 Switch | Broadcom
PEX8624-BB50RBIG

PEX8624-BB50RBIG - 24-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8624-BB50RBIG is a PCI Express Gen 2 switch IC with 24 lanes, six ports, a 5.0 GT/s data rate, and a 324-ball FCBGA package measuring 19 mm by 19 mm. It is designed for systems that need to fan out multiple PCI Express links while preserving a shared upstream connection. A PCI Express switch is an interface IC within the PCI Express interface-controller hierarchy. It adds multiple downstream ports to a host or embedded platform, allowing storage, networking, accelerator, and peripheral links to communicate through one PCIe uplink. The PEX8624 combines this multiport routing function with a 24-lane configuration suitable for servers, embedded platforms, test equipment, and data-acquisition systems. The device supports 24 PCIe lanes and six ports at the Gen 2 rate of 5.0 GT/s. Its 324-FCBGA package provides the interconnect density required for a high-port-count switching IC. The Broadcom product overview also identifies the PEX 8624 family as a 24-lane, six-port PCIe Gen 2 switch, making it appropriate for designs requiring simultaneous expansion of several high-speed peripheral connections. PEX8624-BB50RBIG belongs to the Broadcom ExpressLane PEX 8624 product family. Broadcom documents the AA, AB, and BB variants in a dedicated data book, while product listings identify the BB50RBI order code as a 324-FCBGA implementation. The “G” suffix distinguishes the listed ordering variant from related “F” and “C” suffix variants encountered within the same product family. Typical uses include server storage expansion, Ethernet and network-interface aggregation, industrial data-acquisition chassis, test-and-measurement systems, and embedded computing platforms. A 24-lane fabric can support multiple downstream devices while maintaining a structured PCIe topology. Port and lane allocation must follow the system design rather than treating all 24 lanes as a single endpoint connection. PCB implementation requires careful high-speed signal-integrity work. The manufacturer data book and reference-design material should govern layer stack-up, connector placement, decoupling, reference-plane continuity, and via transitions around the FCBGA device. Power delivery also requires validation under the switching and operating conditions of the intended system. This page organizes the documented switch configuration, order-code distinctions, package details, sourcing information, and practical replacement considerations. It also highlights the need to verify firmware, reference clock, auxiliary-power, port-routing, and platform-level PCIe requirements before approving a substitution.

RFQ پەیوەندی
PEX8632-BB50RBCF - 32-Lane PCIe 2.0 Switch | Broadcom
PEX8632-BB50RBCF

PEX8632-BB50RBCF - 32-Lane PCIe 2.0 Switch | Broadcom

Broadcom PEX8632-BB50RBCF is a 32-lane, 12-port PCI Express Gen 2 switch packaged in a 676-ball FCBGA measuring 27 x 27 mm. It supports a 5.0 GT/s PCIe link rate and provides non-transparent bridging between a host-facing port and multiple PCIe endpoint devices. The device is designed to PCI Express Base Specification 2.0 while remaining backward compatible with revisions 1.1 and 1.0a. A PCI Express switch is a semiconductor that divides one upstream PCIe connection into several downstream links. It belongs to the interface-controller hierarchy, where PCIe fabric switches sit between a root complex or host bridge and endpoint devices. This fabric-switch role reduces the number of host PCI Express ports required in servers, industrial computers, storage systems, and embedded platforms. The PEX8632 provides 32 PCIe lanes across 12 ports, providing substantial downstream bandwidth for storage controllers, network adapters, accelerators, and endpoint devices. Its 5.0 GT/s Gen 2 performance rate matches the throughput per lane defined for that generation of PCI Express. The manufacturer datasheet also identifies auto-negotiation, lane reversal, and polarity reversal support, which help simplify system integration where link training behavior must be adapted to the connected equipment. Internally, the device is organized as a PCI Express fabric switch with programmable multiport configurations. The exact number of logical ports available in a particular system depends on the operating mode and firmware configuration described in the design documentation. This makes the PEX8632 useful for systems that need flexible PCIe routing rather than a simple fixed one-to-one repeater. The 676-FCBGA package also provides a high pin count for power delivery, high-speed differential pairs, configuration interfaces, and auxiliary signals. Typical deployments include server backplane aggregation, multi-disk storage enclosures, industrial PCIe expansion systems, test and measurement platforms, and embedded chassis that must distribute PCIe traffic among several cards. A 12-port fabric is particularly appropriate when a single host adapter must reach multiple downstream endpoint types without introducing another switch tier. Layout and power design are critical because a Gen 2 switch exposes numerous simultaneous high-speed links in a relatively small 27 x 27 mm package. Follow the manufacturer reference design for ball assignment, layer stack-up, high-speed return paths, and power-plane distribution. Keep supply decoupling close to the device and confirm that every power rail meets its specified voltage, tolerance, and sequencing requirements before enabling the system. This page consolidates the device's lane count, port count, PCIe generation, package information, interoperability features, and sourcing context into one engineering reference. It also documents replacement constraints, verified drop-in candidates, and practical integration considerations that are not presented together on a typical distributor listing.

RFQ پەیوەندی
PEX8632-BB50RBCG - 32-Lane PCIe Gen2 Switch | Broadcom
PEX8632-BB50RBCG

PEX8632-BB50RBCG - 32-Lane PCIe Gen2 Switch | Broadcom

Broadcom PEX8632-BB50RBCG is a PCI Express switch IC built for high-lane-count expansion systems, supporting PCIe Gen2 operation at 5.0 GT/s across 32 lanes and 12 ports in a 676-ball FCBGA package measuring 27 x 27 mm. Its combination of 32 lanes, 12 downstream ports, and a 5.0 GT/s interface rate makes it suited to complex server, storage, accelerator, and embedded PCIe aggregation designs. A PCIe switch is a semiconductor device that routes PCI Express traffic between a host or upstream device and multiple downstream endpoints. In the PCI Express hierarchy, it sits below a root complex or host bridge, above endpoint devices, and within the broader category of interface ICs and bus controllers. Unlike a simple endpoint controller, a multi-port switch can divide a wide upstream link among several downstream links while managing PCIe protocol traffic, shared resources, and port-level conditions. The PEX8632 family is identified as a 32-lane, 12-port PCI Express Gen2 switch with a stated transfer rate of 5.0 GT/s. The 12-port architecture supports designs in which numerous endpoint functions share a constrained upstream connection. Its 676-FCBGA package provides the dense interconnect needed for this class of switch, while the reported 27 x 27 mm body dimension defines a substantial routing and thermal-design footprint. The architecture targets balanced bandwidth rather than merely maximizing downstream-port count. With 32 lanes available at 5.0 GT/s, the switch can support wide aggregation paths for NVMe storage, network controllers, acceleration hardware, or other PCIe endpoint devices. Port-level planning remains essential because the usable bandwidth of each downstream link depends on its negotiated width, the upstream allocation, traffic patterns, protocol overhead, and switch configuration. Typical applications include PCIe expansion chassis, server backplanes, storage aggregation, accelerator systems, industrial data-processing equipment, and high-density test systems. In each case, the 12 downstream ports can simplify physical fan-out while the Gen2 5.0 GT/s link rate supports a common PCIe generation across the system. The 676-ball package requires careful ball assignment, multilayer routing, and high-density manufacturing support. Designers should confirm the complete Broadcom pinout, power architecture, reference-clock requirements, and thermal limits against the manufacturer datasheet before schematic capture. PCB implementation must account for the 27 x 27 mm FCBGA land pattern, escape routing, power delivery, and heat removal. Exact capacitance, voltage, clock, and sequencing values should be taken directly from the applicable device documentation. This product overview consolidates the confirmed PCIe generation, lane count, port count, transfer rate, package, and ordering information into one engineering reference. It also identifies the distinct configuration alternatives that can be considered for a new PCIe expansion design, helping teams compare footprint, routing, thermal, and configuration implications before committing a 676-ball design to fabrication.

RFQ پەیوەندی
PEX8636-AA50RBCG - 36-Lane PCIe Gen 2 Switch | Broadcom
PEX8636-AA50RBCG

PEX8636-AA50RBCG - 36-Lane PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8636-AA50RBCG is a PCI Express switch IC configured as a 36-lane, 24-port PCI Express Gen 2 multi-root switch with a stated data rate of 5.0 GT/s per lane. The device is supplied in a 1156-FCBGA package measuring 35 mm by 35 mm and is packaged in trays for board-level integration. Its ExpressLane architecture is intended to fan out multiple PCI Express links among host processors, endpoint devices, storage controllers, and network adapters. A PCI Express switch is a semiconductor device that routes PCI Express transaction and data traffic between multiple downstream ports and an upstream host-facing port. Within the PCI Express hierarchy, the switch sits between a root complex and endpoint devices. The PEX8636-AA family provides multi-root switching for systems that need to divide expansion traffic among several logical domains while maintaining a shared PCI Express fabric. Principal characteristics include support for 36 PCI Express lanes, 24 ports, and PCI Express Gen 2 operation at 5.0 GT/s. The 1156-FCBGA package provides the dense interconnect required for a high-port-count switching device, while the large 35 mm by 35 mm body supports controlled escape routing on multilayer PCBs. Listed product information identifies tray packaging, a moisture sensitivity level of 4 with a 72-hour floor-life condition, and export control classification number 5A991B1. The switching architecture allows a platform to consolidate several downstream links behind an upstream link, reducing the need for separate fabric-switch silicon when deterministic lane routing and centralized management are required. Fanout designs can improve resource organization in servers, storage appliances, industrial controllers, and multi-host systems, provided that the system topology remains within the electrical and protocol constraints defined for the device. Thermal design is a central implementation consideration because a 1156-ball FCBGA concentrates high-speed and power-management functions into a compact area. The PCB should provide the reference stack-up, via density, decoupling, and copper area prescribed by the Broadcom ExpressLane PEX 8636-AA Data Book. Signal-integrity validation should include the intended lane rates, loss budget, connector and retimer transitions, and the full end-to-end channel. Typical uses include server storage backplanes, PCI Express expansion chassis, multi-root computing platforms, industrial data-acquisition systems, and test equipment that distributes links among several instruments or accelerators. Application selection must verify port mapping, lane-width sharing, firmware support, reference-clock architecture, and the precise Broadcom ordering code before schematic capture.

RFQ پەیوەندی
PEX8648-BB50RBCF - 48-Lane 12-Port PCIe Gen 2 Switch | Broadcom
PEX8648-BB50RBCF

PEX8648-BB50RBCF - 48-Lane 12-Port PCIe Gen 2 Switch | Broadcom

The Broadcom PEX8648-BB50RBCF is a 48-lane, 12-port PCI Express Gen 2 switch operating at 5.0 GT/s and packaged in a 676-FCBGA (27 x 27 mm) package. It is designed for systems that require multiple PCI Express links to be consolidated, switched, and routed among host, accelerator, storage, networking, or embedded endpoints. The device belongs to the ExpressLane PEX 8648 family of PCI Express fabric switches. A PCI Express switch is an interface IC that creates a switched PCI Express fabric beneath a host complex or another PCI Express switch. Within the broader semiconductor hierarchy, it is an interface controller, then a PCI Express interface IC, then a semiconductor. The PEX8648 supports the PCI Express Gen 2 signaling rate of 5.0 GT/s and provides 48 lanes across 12 ports, making it suitable for complex server, accelerator, storage, and network-equipment architectures. The principal documented characteristics are 48 PCI Express lanes, 12 ports, a 5.0 GT/s per-lane data rate, and a 676-FCBGA package measuring 27 x 27 mm. The manufacturer data book identifies the PEX8648 family as a 48-lane, 12-port PCI Express Gen 2 switch. Its high lane count allows multiple downstream devices or additional switch tiers to share an upstream connection while preserving individual PCIe links. The BB silicon revision and RB ordering designation place the part within the PEX 8648 BB product family. The manufacturer documentation covers the PEX8648 AA, AB, and BB devices and includes production information for silicon revision BB. Because this is a dense, high-speed interconnect device, correct ball assignment, power delivery, reference-clock implementation, and signal-integrity layout are more important than a conventional low-power analog layout. Typical applications include PCI Express fabric expansion in industrial servers, accelerator aggregation in compute systems, high-bandwidth storage controllers, Ethernet and networking appliances, and embedded systems that connect several PCIe endpoints to a host controller. The 12-port topology can also support hierarchical fabrics in which downstream switches expand the number of available endpoints. PCB design should follow the manufacturer’s ball-out, reference design, power-plane, decoupling, and high-speed routing guidance exactly. A 676-ball FCBGA demands careful via-in-pad or microvia strategy, adequate layer-transition planning, and controlled impedance for every PCI Express lane. Use the pin-description and ball-assignment tables in the Broadcom data book when assigning PCB tracks. This page combines the documented PEX8648 family specifications, sourcing information for the exact ordering code, engineering application guidance, and a constraint-based comparison of available same-family ordering variants. It is intended to help hardware engineers qualify the correct Broadcom ordering code without confusing package, lifecycle, or configuration differences with genuine drop-in replacements.

RFQ پەیوەندی
PEX8648-BB50RBCG - 48-Lane PCIe Gen2 Switch | Broadcom
PEX8648-BB50RBCG

PEX8648-BB50RBCG - 48-Lane PCIe Gen2 Switch | Broadcom

The Broadcom PEX8648-BB50RBCG is a 48-lane, 12-port PCI Express Gen 2 switch integrated circuit in a 676-ball FCBGA package measuring 27 mm by 27 mm. It operates at 5.0 GT/s per lane and is designed to fan out multiple PCI Express links for systems requiring increased endpoint connectivity, expanded storage capability, or dedicated downstream traffic paths. A PCI Express switch is a multiport semiconductor that routes PCI Express transaction, data, and control traffic between a host or upstream port and multiple downstream endpoints. Within the PCIe hierarchy, this device belongs to the switching and interface-device category, where lane multiplexing allows a constrained host interface to serve numerous peripherals without assigning a dedicated root port to each one. The principal specifications are 48 PCIe lanes, 12 ports, a 5.0 GT/s PCIe Gen 2 data rate, and a 676-FCBGA package with a 27 mm by 27 mm body. The reported RoHS status supports use in modern electronics manufacturing, while the Broadcom technical document covers the AA, AB, and BB silicon revisions of the PEX 8648 family. Exact electrical limits, reference clocking, power domains, and operating-temperature details should be selected from the manufacturer data book. The PEX 8648 architecture is suited to consolidating PCI Express connectivity in embedded computers, industrial controllers, network appliances, storage systems, and test equipment. Forty-eight lanes provide substantial downstream bandwidth at 5.0 GT/s per lane, while 12 ports allow more endpoint fan-out than a conventional root-complex-only design. Designers should preserve the exact reference-design ball assignments, power architecture, and connector requirements when translating the device into a PCB layout. This page distinguishes the ordering code, package, lane count, port count, and PCIe generation from superficially similar Broadcom variants. It also organizes replacement guidance around genuine FCBGA-676 pin-compatible options rather than functional PCIe switches that require a different footprint. Compatibility must include the correct ball map, lane assignments, clocking, auxiliary power, and system firmware configuration. For new layouts, follow the Broadcom PEX 8648 data book for differential routing, reference-plane transitions, power distribution, decoupling, reset behavior, and connector reach-through. A small BGA with hundreds of signal balls requires disciplined escape routing and through-hole vias beneath the device where the package design permits them. Confirm the exact ordering code before releasing a long-lead procurement order. The information here synthesizes the confirmed 48-lane, 12-port, 5.0 GT/s architecture with package-level replacement analysis and implementation guidance. It helps engineers distinguish orderable suffixes, assess board-level reuse, and identify the electrical and mechanical checks required before treating a candidate as a true drop-in replacement.

RFQ پەیوەندی
PEX8648-BB50RBIG - 48-Lane PCIe Gen2 Switch | Broadcom
PEX8648-BB50RBIG

PEX8648-BB50RBIG - 48-Lane PCIe Gen2 Switch | Broadcom

Broadcom PEX8648-BB50RBIG is a PCI Express Gen2 switch IC built around a 48-lane, 12-port ExpressLane architecture, with a stated link rate of 5.0 GT/s and a 676-ball FCBGA package measuring 27 x 27 mm. It is intended for systems that need to fan out multiple PCI Express links while maintaining a common switching fabric. A PCI Express switch is a semiconductor device that creates multiple PCIe links from an upstream host connection. It belongs to the PCI Express interface-controller family, alongside host bridges, endpoint controllers and fabric switches. By placing a switch between a root complex and downstream devices, a system can support concurrent expansion traffic, peer-to-peer routing and more complex PCI Express topologies than a direct point-to-point connection permits. The confirmed PEX8648 family characteristics include support for 48 lanes across 12 ports, PCIe Gen2 operation at 5.0 GT/s, and the 676-FCBGA package identified for the BB50 variants. These specifications make the device suitable for high-bandwidth platform designs requiring numerous downstream links. Its scale is particularly relevant to storage systems, advanced networking appliances, embedded computing platforms and test systems that must aggregate several PCIe devices. The PEX8648 data book describes the BB silicon revision and its detailed technical specifications. A 27 x 27 mm FCBGA package provides a dense mounting solution for multilayer boards, but it also requires careful escape routing, plane management, power delivery and thermal design. Because the package contains 676 balls, board designers should preserve the manufacturer's land pattern, ball assignment and reference design rather than treating the package as a generic square BGA. Typical deployments place one or more PCIe switches behind a host controller or another fabric switch. In a server or storage controller, the switch can connect NVMe-capable devices, host buses and management interfaces. In an industrial or networking appliance, it can organize multiple endpoint controllers behind a shared upstream link. The primary engineering trade-off is that PCIe switching adds board area, power, configuration requirements and signal-integrity complexity in exchange for topology flexibility and aggregate throughput. Power delivery must account for both the main supply rails and the auxiliary rails used by the reference architecture. Layer-stackup selection, connector and retimer placement, and the separation of high-speed and power paths should follow the Broadcom reference material. For a 27 x 27 mm BGA, inspection and assembly processes should also be coordinated with the board fabricator because fine-pitch ball alignment can materially affect yield. This page combines the verified 48-lane, 12-port, 5.0 GT/s and FCBGA-676 characteristics with practical routing, power, thermal and replacement guidance. The alternatives table focuses on same-package PEX8648 orderable variants, while the application sections explain how the switch architecture changes board-level design decisions.

RFQ پەیوەندی