Interface ICs
ژێرپۆلەکان
بەرهەمەکان (5,100+)
SI3010-FSR - 2.4 kbps Global DAA | Silicon Labs (Tape & Reel)
The Silicon Labs SI3010-FSR is a 2.4 kbps direct access arrangement integrated with a global DAA and supplied in a 16-pin SOIC package. It operates from a 3 V to 3.6 V supply, supports a 0°C to 70°C temperature range, and is intended for telephone-line interface and ISOmodem applications. The SI3010-FSR combines the line-side signaling functions of a direct access arrangement with the digital interface requirements of a V.22bis ISOMODEM system. A direct access arrangement, or DAA, is the line-side interface between a modem data terminal and a public switched telephone network. It converts analog line conditions into signals that can be processed by modem circuitry while providing the required isolation, hook-state detection, dialing, and line-current handling. A global DAA is designed to support internationally configurable telephone-line behavior rather than a single country-specific line interface. The SI3010-FSR provides a 2.4 kbps data rate and operates from 3 V to 3.6 V, making it suitable for legacy V.22bis-class data communication equipment. Its 16-pin SOIC package is a surface-mount format suitable for automated assembly, and the reel configuration supports production feeding. The documented operating range of 0°C to 70°C identifies the SI3010-FSR as a commercial-temperature device. The integrated DAA reduces the number of external line-interface functions required in a complete modem design. This can simplify the printed-circuit-board layout while preserving a standardized telephone-line interface. Because the part belongs to the Si2401 and Si2404 ISOmodem families, it is particularly relevant to designs requiring a line-side DAA paired with established modem controller or codec functionality. Typical uses include 2400 bps modem hardware, fax and data terminal equipment, industrial data links operating through telephone networks, and legacy communications controllers that require a globally programmable DAA. The SI3010-FSR is also useful when a completed modem design must be maintained with an established 16-pin SOIC footprint and 2.4 kbps class performance. Designers should verify the complete SI3010 or Si240x companion-device arrangement because the DAA also requires suitable line-interface components and an appropriate host or modem companion. PCB layout must preserve the manufacturer's recommended analog and digital partitioning, while component selection must account for the telephone network's voltage and current requirements. This page consolidates verified distributor references, package and operating details, available replacement references, and practical selection guidance. It also identifies which technical and commercial values remain unavailable rather than presenting estimated specifications as verified facts.
SI3010-GS - 3.6V DAA Interface IC | Silicon Labs | Telecom
Silicon Labs SI3010-GS is an obsolete telecom interface IC implementing a Direct Access Arrangement (DAA) in a 16-pin SOIC package. The device operates from a 3 V to 3.6 V supply, consumes 15 mA, and is specified over a 0°C to 70°C temperature range. Its documented interfaces include parallel, SPI, and UART connections, while its 16-SOIC package measures approximately 3.90 mm in width. These specifications position the SI3010-GS as a line-side DAA controller for legacy telecom equipment rather than a general-purpose interface device. A Direct Access Arrangement is a subscriber-line interface controller that separates a telephone line codec from the host digital signal processor or CPU. In this product hierarchy, the SI3010-GS is a DAA interface IC within the broader category of telecom interface ICs. Such devices traditionally handled line-state signaling, loop control, and the host-side data interface used by customer-premises equipment, telephone adapters, and other legacy voice systems. The SI3010-GS offers a 3 V to 3.6 V operating supply, 15 mA supply current, and parallel, SPI, and UART host-interface options. Its 16-pin SOIC construction supports conventional surface-mount assembly and tubing or reel-handling workflows. Because the published status is obsolete, procurement decisions should emphasize confirmed availability, original manufacturer traceability, and functional equivalence with the specific firmware and line-interface implementation. Technically, the combination of a DAA function and multiple serial host interfaces allows the device to sit between a line-side codec or network termination path and an embedded controller. Parallel access can support legacy processor buses, while SPI and UART simplify connection to modern controllers. The 3.3 V-class supply also makes the device compatible with 3.3 V embedded systems, provided the associated clocking, reset, and interface levels comply with the system design. Typical uses include legacy Voice over IP terminal designs, embedded voice bridges, telephone-line interface modules, and industrial telecom equipment that retains a Silicon Labs-compatible DAA architecture. Replacement work should verify not only voltage and package dimensions but also register behavior, interrupt timing, clock requirements, line-side integration, and the host firmware's expectations. The principal design consideration is lifecycle risk: the SI3010-GS is listed as obsolete, so production continuity cannot be assumed. Engineers should obtain a controlled stock source, confirm the exact MPN and package, and validate any substitute against the manufacturer's SI3010 documentation before production release. This page consolidates the verified supply range, package details, lifecycle information, interface capabilities, and qualified same-footprint alternatives into one engineering-focused record. It also distinguishes documented facts from missing electrical details, helping designers evaluate sourcing risk and replacement decisions without inferring unsupported pinout or performance data.
SI3010-KS - 3.3V Global Serial DAA | Silicon Labs | Telecom
The Silicon Labs SI3010-KS is a 3.3 V direct access arrangement interface IC designed for global telephone-line applications, with a 3 V to 3.6 V supply range, 15 mA operating current, and a 16-pin SOIC package. Its programmable line interface supports parallel, SPI, and UART host connectivity, making it suitable for compact subscriber-line equipment and other telecom interfaces that need to minimize external analog-front-end components. A direct access arrangement, or DAA, is a semiconductor interface that connects a digital communications system to an analog telephone line. In the broader hierarchy, a DAA belongs to the telecommunications interface class, which sits within interface ICs and broader semiconductor solutions. Instead of implementing every line-side function with separate analog, isolation, switching, and signal-conditioning components, a DAA IC consolidates those functions into a controlled silicon interface. The SI3010-KS operates from a 3 V to 3.6 V supply and is identified by distributor listings as a single-circuit telecom DAA. Its available interface choices include parallel, SPI, and UART, giving the system designer several host-bus options for registering, configuration, and line-status monitoring. The listed operating current of 15 mA provides a concrete power figure for preliminary 3.3 V rail budgeting in compact telecom equipment. The device is supplied in a 16-SOIC package measuring 3.90 mm in body width. Distributor records identify both tube packaging and surface-mount construction, while the package family remains SOIC, a surface-mount technology also known as small-outline integrated circuit packaging. The 16-pin arrangement supports a relatively compact land pattern compared with larger leaded telecom-interface packages. Typical uses include Voice over IP subscriber terminals, analog telephone adapters, customer premises equipment, embedded voice systems, and other products that must bridge a digital controller with a telephone line. The exact line-side operating modes, country-specific network requirements, and host protocol details should be confirmed in the manufacturer datasheet before production release. Design planning must account for the 3.3 V supply tolerance, the 15 mA current requirement, the analog telephone-line environment, and the need for correct external protection and hook-related circuitry. Because a DAA is safety- and network-interface sensitive, PCB routing, isolation boundaries, surge exposure, and regulatory requirements should be reviewed as a complete design rather than treated as a generic serial-interface layout. This product record combines verified distributor specifications, package information, cross-reference results, drop-in replacement analysis, application guidance, and design considerations. It highlights where the SI3010-KS matches the published SI3010-F-FSR comparison data and clearly identifies parameters that remain unverified rather than estimating unsupported electrical details.
SI3011-F-FS - FCC Line-Side DAA Interface IC | Silicon Labs
The Silicon Labs SI3011-F-FS is a programmable FCC line-side Direct Access Arrangement (DAA) interface IC designed for the Si3050 voice modem, with operation in a 16-pin SOIC package. It provides the analog line-side interface required by foreign-exchange office equipment, while the associated Si3050 handles the modem-facing digital functions. A DAA is an integrated telephony interface that replaces several discrete line-side protection and isolation components. In this product family, patented isolation-capacitor technology eliminates the need for isolation transformers, relays, and opto-isolators. This reduces board area and component count while providing a dedicated solution for globally compliant FXO designs. The SI3011 therefore belongs to the interface-IC hierarchy: DAA → line interface → telephony interface → integrated circuit. The SI3011-F-FS is designed as part of the Si3050 plus Si3011, Si3018, and Si3019 voice-DAA chipset. According to the manufacturer datasheet, the solution is highly programmable and targets foreign-exchange office analog interfaces. Its principal implementation benefit is the use of integrated isolation-capacitor technology, allowing a compact 16-SOIC interface without a conventional transformer-based isolation network. The Si3050 interfaces directly with standard telephony PCM interfaces, creating a division of labor between the host modem and the line-side DAA. The SI3011 handles the analog telephone-line interface, while companion devices address different channel or configuration requirements within the broader Si3011, Si3018, and Si3019 family. Selection should therefore be based on the exact Si3050 configuration, line requirements, regional compliance target, and supported package variant. Typical uses include voice-over-IP terminal equipment, embedded voice gateways, fax and multifunction-printer interfaces, PBX peripheral modules, and other FXO products that connect an analog telephone line to a digital voice modem. The integration of isolation and line-interface functions is particularly useful when product size and assembly simplicity matter. When laying out the design, preserve the datasheet-recommended line-side network and keep sensitive analog routing away from digital and power-conversion circuitry. Confirm the exact pin functions, bypass requirements, PCB footprint, and regional compliance configuration in the manufacturer datasheet before releasing a production layout. Validate conducted emissions, ringing behavior, hook-state operation, and line-loading performance in the final telephone network environment.
SI3012-KS - V.90 Global MC'97 Silicon DAA | Silicon Laboratories
Silicon Laboratories SI3012-KS is a Global MC'97 silicon direct access arrangement for modem and telephone-line-interface applications, combining an AC'97 2.1-compliant primary or secondary codec with a global phone-line interface. The device provides 84 dB dynamic range across its transmit and receive paths, operates from a 5 V power supply, and is offered in a 16-pin SOIC package. A direct access arrangement, or DAA, is the telephone-interface portion of a modem or communications system. It connects the host codec and modem data path to an analog telephone line while providing the signaling, isolation, and transmit/receive functions needed for global line-interface operation. In the component hierarchy, the SI3012-KS is a communications interface IC rather than a general-purpose codec or memory device. Verified feature data identifies AC'97 2.1 compliance, support for primary or secondary codec operation, and compatibility with FCC, CTR21, JATE, and other public telephone network requirements. Its 84 dB dynamic range provides the principal quantified signal-path performance figure, while the 5 V supply simplifies integration with conventional communications equipment. The SI3012-KS is specifically associated with V.90 modem designs and is listed as a Modem V.90 device in 16-SOIC packaging. The product is marked not recommended for new designs, with Si3018 identified by the distributor listing as the recommended successor for new-product planning. This lifecycle distinction is important for maintenance and repair work involving existing V.90 equipment. Typical uses include V.90 data-modem hardware, analog telephone-line interfaces, primary and secondary AC'97 codec connections, and legacy communications equipment requiring global telephone-network interface support. Its 5 V operating supply and 84 dB transmit/receive dynamic range fit established analog modem architectures, while the stated regulatory and PTT compatibility support deployment across multiple international line standards. Designers should preserve the manufacturer's reference circuit and verify the external isolation, line-interface, and codec connections against the SI3012-KS datasheet. Because the SI3012-KS is not recommended for new designs, new products should evaluate the Si3018 instead of assuming functional interchangeability. The available search data does not provide a verified pinout, detailed timing specification, or manufacturer pricing, so those values should be confirmed before schematic capture or procurement. This page distinguishes the SI3012-KS communications DAA from the similarly named Sanken SI-3012KS low-dropout regulator, consolidates verified lifecycle and feature information, and identifies the documented successor path for engineers evaluating legacy V.90 modem designs.
SI3014-KS Global MC-97 DAA | Silicon Labs | Telecom
The Silicon Labs SI3014-KS is a global MC-97 direct-access-arrangement interface IC with an AC97 2.1-compliant codec interface, 84 dB transmit and receive dynamic range, a 5 V power supply, and greater-than-3000 V isolation. It is supplied in a surface-mount, 16-SOIC package measuring 0.154 inches, or 3.90 mm, in width. A direct-access arrangement, or DAA, is a telephone-line interface device that places a codec and line-side transceiver behind a digital host interface. In the broader hierarchy, the SI3014-KS belongs to interface ICs, telecom line interfaces, modem ICs, and semiconductor ICs. Its MC-97 architecture helps a host codec control the digital and analog telephone-line signal path while the integrated isolation barrier separates host-side circuitry from line-side circuitry. The verified data identifies the SI3014-KS as a primary or secondary codec interface that is compliant with FCC, CTR21, JATE, and other PTT requirements. Its 84 dB dynamic-range TX/RX paths support voice-quality signal handling. Operation from a 5 V supply and compatibility with 3.3 V-related product information may be useful in mixed-voltage telecom designs, but circuit-specific voltage limits must be confirmed against the manufacturer datasheet before implementation. The device uses ASK over home power lines as its listed data format, while additional source material identifies it as a global MC-97 silicon DAA for telephone and modem interfaces. These descriptions place it between a digital audio codec and an analog phone line, with isolation helping control fault energy and common-mode coupling. Users should account for the non-RoHS and contains-lead status stated in the verified distributor data when evaluating regulatory and assembly requirements. Typical uses include legacy caller-ID, fax, answering-machine, voice-mail, modem, PBX, and embedded telephone equipment. In these systems, the MC-97 interface can connect a host processor to the line-side transceiver while the AC97 link carries digital audio and control traffic. Existing equipment may also use the SSI interface described in distributor listings, although the exact supported interface configuration must be checked against the original system design. Designers should not treat the isolated line interface as a universal drop-in replacement without reviewing the pinout, supply rails, clocking, impedance, isolation, and regulatory circuit requirements. The verified data identifies the part as not recommended for new designs and points users toward the Si3018 datasheet, so lifecycle and sourcing checks are essential. This page combines the verified specifications, sourcing records, and practical constraints without inventing undocumented electrical values.
SI3015-BS - 3.3V ISOmodem DAA | Silicon Laboratories
The Silicon Laboratories SI3015-BS is a 3.3 V ISOmodem line-side direct access arrangement with an integrated global telephone-line interface, a 2.4 kbps V.90 data format, and a 16-SOIC package. It operates from 3.3 V or 5 V and is identified as an obsolete telecom interface IC. An ISOmodem is a modem chipset designed for direct access arrangements used by analog telephone equipment. In the signal chain, it belongs to the modem IC category, provides the telephone-line interface, and supports primary or secondary AC97 codec operation. This places the SI3015-BS between a host audio or data interface and the public switched telephone network, reducing the need for a separate external line interface circuit. The principal verified features include AC97 2.1 compliance, support for FCC, CTR21, JATE, and other PTT requirements, 84 dB dynamic range across the transmit and receive paths, a 5 V power supply option, and greater than 3000 V isolation. The 16-SOIC package measures 0.154 inch, or 3.90 mm, in width and is supplied in a tube for the SI3015-BS ordering code. Technically, the SI3015-BS combines modem functionality with a global line-side DAA rather than relying on a discrete telephone interface arrangement. Its 2.4 kbps V.90 format targets legacy data communications rather than broadband modem applications. The listed 3.3 V operating option supports lower-voltage host equipment, while 5 V operation accommodates legacy telecom circuitry. The published 84 dB dynamic range is relevant to voice and low-speed data quality, and the greater than 3000 V isolation rating provides the primary withstand information associated with the line interface. Typical uses include legacy fax and data terminal equipment, telephone answering devices, remote data terminals, industrial dial-up links, and embedded telephone-line products requiring a direct access arrangement. In these systems, the SI3015-BS can interface with an AC97 codec or compatible host while handling the line-side isolation and telephone-network requirements. Designers should confirm whether the obsolete lifecycle status and legacy 2.4 kbps data rate match the intended equipment. PCB work also requires review of the external telephone-network components, isolation boundary, analog line interface, and power arrangement because those implementation details are not fully characterized by the available verified excerpts. This page consolidates verified distributor excerpts, lifecycle information, package details, interface standards, and replacement-screening constraints. It clearly distinguishes documented SI3015-BS characteristics from unavailable electrical values, preventing an obsolete part from being presented with fabricated pin, pricing, or replacement data.
SI3015-FS - V.90 Modem, 16-SOIC | Silicon Labs
The Silicon Labs SI3015-FS is a 2.4 kbit/s V.90 modem chipset with error correction, supplied in a 16-pin SOIC package measuring 0.154 inch by 3.90 mm. It belongs to the Si2400 ISOmodem family, whose integrated direct access arrangement and programmable telephone-line interface reduce the external circuitry required by a conventional modem design. An ISOmodem chipset is a semiconductor solution for connecting equipment to public telephone lines. It combines modem signal-processing and telephone-interface functions into one device family, reducing the need for a separate DSP data pump, modem controller, analog front end, isolation transformer, relays, and optocouplers. The SI3015-FS therefore sits within the broader modem IC and telephone-line interface hierarchy rather than serving as a general-purpose communications transceiver. The verified listing identifies the part as a V.90 modem operating at 2.4 kbit/s and identifies a 16-pin SOIC package. It also reports V.90 data formatting and tube packaging. A secondary technical listing describes the related SI3015-F-FS variant as a V.22bis ISOmodem chipset with error correction, while the family documentation describes programmable line-interface functionality. Detailed electrical ratings, protocol features not present in the supplied data, and pin assignments remain unverified and must be checked against the manufacturer datasheet before design release. The SI3015-FS is associated with legacy telephone-network equipment, data communications, fax systems, embedded modems, and industrial telephone interfaces. Its integrated ISOmodem architecture can shorten board development by consolidating functions that would otherwise occupy multiple discrete or integrated blocks. The 16-SOIC package is also straightforward to route on a through-hole PCB and can be assembled using conventional leaded-package processes. Designers must confirm country-specific line-interface requirements, isolation boundaries, ring detection, hook-switch control, impedance matching, and firmware compatibility before deployment. Do not assume that a distributor category label constitutes proof of regulatory approval. The supplied evidence also does not establish the target part's lifecycle status, pinout, absolute maximum ratings, or complete compliance declarations. This page consolidates the verified SI3015-FS product, package, protocol, sourcing, and datasheet information into an engineering-oriented record. Where evidence is insufficient, it explicitly identifies missing data rather than estimating electrical values or proposing unverified pin-compatible replacements. Compare the exact ordering code, datasheet revision, and line-interface schematic before substituting any related SI30xx or Si24xx device.
SI3015-KS - 2.4 kbps V.90 Modem IC | Skyworks Solutions
The Skyworks Solutions SI3015-KS is a 2.4 kbps V.90 modem integrated circuit in a 16-pin SOIC package. The verified distributor listing identifies the device as a modem IC with V.90 operation, while available documentation describes the SI3015 family as a V.22BIS ISOMODEM chipset with error correction. These positions place SI3015-KS in the interface-IC hierarchy for legacy data communication and telephone-line modem designs. Its package supports conventional surface-mount PCB assembly while preserving access to the analog and digital interfaces required by a host controller. A modem integrated circuit is a mixed-signal interface component that converts digital data into line-signal waveforms and reconstructs digital data from received signals. Within the broader category of interface ICs, this function bridges a host processor or data terminal with a communications channel. The V.90 designation identifies the modem standard associated with the listed 2.4 kbps operating class, while V.22BIS documentation provides additional family-level context. Error-correction capability is particularly relevant when a design must recover reliably from line noise or signal impairments. The SI3015-KS combines an integrated modem function with a compact 16-SOIC footprint. Its primary verified features are the 2.4 kbps modem rate, V.90 listing, 16-pin SOIC package, surface-mount construction, and error-correction support as stated in the indexed datasheet description. The package is suited to industrial and telecommunications equipment that retains V.22bis or V.90-era interfaces. Because this is a legacy interface product, system compatibility, electrical limits, clocking, and interface timing should be confirmed against the original manufacturer documentation before a new PCB is released. The SI3015-KS belongs to a signal path where analog line-side behavior and digital host-side behavior meet. Designers commonly place it in terminal equipment, data-card hardware, remote-control systems, and embedded telephone-data products. Its 2.4 kbps speed is much slower than modern broadband links, but it remains useful for low-bandwidth, legacy, or cost-constrained systems whose counterpart equipment still supports the same modem standard and physical interface. A key procurement consideration is lifecycle status. The verified Mouser result states that SI3015-KS is “Not recommended for new designs” and directs users to the Si3018 datasheet. Consequently, the SI3015-KS is most appropriate for repair, continuation, or compatibility work rather than unrestricted greenfield adoption. Existing production programs should verify lifecycle status, availability, and any notice of change before committing a long-term BOM. This page consolidates verified distributor descriptions, lifecycle guidance, application context, and sourcing information for SI3015-KS. It distinguishes the 16-SOIC V.90 2.4 kbps listing from related SI3015 documentation while avoiding unsupported electrical claims. Engineers should use the datasheet and line-interface circuitry for final timing, pin, protection, and component-selection decisions.
SI3016-BS - 3.3V Global DAA V.90 Modem | Skyworks
The Skyworks Solutions SI3016-BS is a 3.3 V enhanced global direct access arrangement and V.90 modem interface IC in a 16-pin SOIC package. It integrates the line-side functions required by processors that already contain a system-side DAA, including a programmable line interface, line-voltage monitor, loop-current monitor, parallel handset detection, and overload protection. Verified distributor data identifies the SI3016-BS as a modem-class, 16-SOIC device. A direct access arrangement, or DAA, is a telephone-line interface that separates the external analog network from the digital host processor. In the SI3016 architecture, the host processor provides the system-side DAA while SI3016-BS handles the line-side function. This division allows a design to eliminate a conventional analog front end, isolation transformer, relays, opto-isolators, and a 2- to 4-wire hybrid, according to the manufacturer datasheet carried by Mouser. Key verified features include 3.2 dBm transmit/receive levels, a 7 µA on-hook line-monitor current, parallel handset detection, and overload protection. The programmable line interface supports adaptation to global telephone-line requirements, while the 3.3 V supply matches contemporary embedded processor systems. These features are relevant to modem, voice-over-data, fax, and telephony equipment that uses a host processor with an integrated system-side DAA. SI3016-BS combines a mixed-signal line interface with digital modem signaling in one package. Its 16-pin small-outline package supports conventional surface-mount assembly and keeps the telephone-line interface compact. The part is identified as an industrial-temperature component in one distributor result, but the exact temperature range and absolute electrical limits were not included in the supplied excerpts and therefore are not inferred here. Typical applications include central-office terminal equipment, caller-ID interfaces, voice gateways, fax machines, modems, and embedded telephone systems. In these systems, the SI3016-BS can sit between the telephone network and a processor that integrates the system-side DAA. Its value comes from reducing external analog-interface components while retaining programmable line control and protection functions. Designers should confirm compatibility with the selected host processor, its system-side DAA, and the country-specific telephone-network requirements before production release. The manufacturer datasheet should govern pin connections, line-interface programming, electrical limits, timing, and test conditions. Designers should also preserve the required isolation and surge-protection strategy at the board and line-interface boundary. This page consolidates verified distributor listings, the available manufacturer datasheet link, package information, and documented feature data into one engineering-oriented reference. It deliberately leaves unsupported electrical limits, pricing tiers, pin functions, lifecycle claims, and drop-in equivalents unstated until authoritative data is available.
SI3016-FS - 3.3V V.90 Line-Side DAA | Skyworks Solutions
Skyworks Solutions SI3016-FS is a 3.3 V enhanced global direct access arrangement (DAA) line-side interface IC with a V.90 modem function, supplied in a 16-pin small-outline integrated-circuit package. The device provides a programmable telephone-line interface and is designed to reduce the external analog circuitry required in global line-side applications. According to the manufacturer data sheet, integrating the DAA eliminates the need for a separate analog front end, isolation transformer, relays, opto-isolators, and a 2- to 4-wire hybrid. A direct access arrangement is the line-side interface between a telephone network and a modem or host processor. Within the broader hierarchy, the SI3016-FS is a DAA integrated circuit, a line interface IC, a modem IC, and ultimately an interface IC within the semiconductor category. Its programmable line interface is intended to support global telephone-line requirements while reducing board area and the number of discrete components that a conventional analog line interface would require. The verified listing identifies the SI3016-FS as a 3.3 V, V.90, 16-SOIC device. The compact 16-pin SOIC package is a surface-mount package in the SOIC family. The SI3016-FS is specifically associated with a Skyworks Solutions interface for connecting a line-side DAA arrangement to a compatible Silicon Laboratories host-processor system-side interface. The provided data also distinguishes the SI3016-F-FS ordering variant, but it does not provide a complete pin-level comparison proving that it is a drop-in replacement. Key benefits include integration of the line-side DAA function, a programmable telephone-line interface, and elimination of several discrete protection and coupling components. These characteristics can simplify compliance-oriented telephone-interface designs, reduce assembly cost, and conserve PCB area compared with discrete implementations. The value is greatest where the host processor supports the required integrated system-side DAA interface and where the complete SI3016 reference design has been evaluated against the applicable network requirements. Typical uses include V.90 modem equipment, line-side DAA modules, telephone-network interface circuits, and compact data-over-voice products. The SI3016-FS is also relevant to industrial or communications equipment requiring an integrated line-side interface, subject to validation of host compatibility, isolation, surge exposure, line impedance, and regulatory requirements for the target country or network. The primary design consideration is host-interface and regulatory validation: the device cannot be treated as a generic RS-232 modem because it is a line-side DAA with telephone-network coupling requirements. Designers should follow the manufacturer data sheet for external components, line-side protection, clocking, grounding, and host connections. This page synthesizes verified distributor data, the SI3016 data sheet, alternative evidence, and practical selection guidance that are not presented as a single raw manufacturer table.
SI3016-KS - 3.3V V.90 Embedded Modem DSP | Texas Instruments
The Texas Instruments SI3016-KS is a 3.3 V enhanced global direct-access-arrangement line-side IC for embedded V.90 modem designs, with protocol support for V.21, V.22, V.23, V.32, V.34, V.90, Bell 103, and Bell 212A. The device is supplied in a 16-pin small-outline package and is intended for telephone-line interface systems requiring an integrated line-side modem function. Its protocol coverage makes it relevant to legacy embedded communications equipment, telephone interfaces, and data-acquisition systems rather than general-purpose signal processing. An embedded direct-access arrangement, or DAA, is the line-side interface between a telephone network and a modem signal chain. It combines the physical line-interface requirements with programmable modem support, allowing a host processor to manage communications through a dedicated integrated device. In the system hierarchy, the SI3016-KS sits at the interface between a host processor and a telephone line, where signal conditioning, modem protocol support, and line connectivity must be coordinated. Verified distributor information identifies the SI3016-KS as a modem DSP supporting V.21, V.22, V.23, V.32, V.34, V.90, Bell 103, and Bell 212A. The available electrical data identifies a 3.3 V enhanced global DAA and a 1.42 V to 1.65 V supply range for the host-processor-side portion of the specification. The public package description identifies a 16-pin SOP with gull-wing leads, while the exact internal pin assignments and electrical limits require the manufacturer datasheet for board-level design. Typical implementations use the IC in embedded modem equipment, telephone-line data terminals, industrial communication equipment, and legacy WAN or remote-access systems. The broad protocol set allows software or firmware to select among several modem standards instead of requiring a separate modem IC for every line rate. The practical trade-off is that SI3016-KS is a specialized line-side solution rather than a general-purpose DSP, so system designers must verify clocking, analog line-interface requirements, host signaling, and software support against the complete datasheet. For layout, preserve the package footprint, route the telephone-line interface according to the datasheet’s reference application, and verify supply decoupling and signal-return paths before production. The datasheet PDF should be treated as the controlling source for pinout, timing, absolute maximum ratings, and interface details; the available search data does not provide enough verified information to safely invent those values. This page combines distributor metadata, protocol descriptions, sourcing references, and design cautions rather than claiming unverified electrical or timing figures.
SI3018-F-FS - Global Voice DAA in 16-SOIC | Skyworks
The Skyworks SI3018-F-FS is a programmable global voice Direct Access Arrangement (DAA) integrated circuit packaged in a 16-pin SOIC. It serves as the line-side analog interface in the Si3050 voice-DAA chipset architecture, which also includes Si3011, Si3018, and Si3019 line-side devices. The device supports V.92 and V.34 modem applications and is intended for global foreign-exchange office, or FXO, analog interfaces. A Direct Access Arrangement is a telecom interface IC that bridges an analog telephone line and a digital modem or voice-processing system. Within the signal path, it handles the line-side connection required by the associated modem chipset. The broader hierarchy is DAA → line-side interface IC → telecom interface IC → integrated circuit, placing the SI3018-F-FS specifically in the analog PSTN-to-digital-modem signal chain. The primary defining feature of the SI3018-F-FS is its role in a globally compliant, highly programmable voice-DAA chipset. The 16-SOIC package provides a compact surface-mount implementation for line-card and modem designs. The -FS ordering form is identified as a Skyworks global line-side DAA for the Si24xx modem family, while related SI3018 variants appear under the SI3018 device family. The SI3018-F-FS also participates in a larger monitoring and control ecosystem. The associated Si3056 can measure loop current and line voltage when used with the Si3010, Si3018, and Si3019 line-side devices, and its LCS2 and LCS registers report the measured loop current. This relationship makes the SI3018-F-FS relevant to designs that need programmable FXO access together with supervisory line-state information. Typical applications include broadband and embedded voice modems, customer-premises equipment, digital subscriber line terminal equipment, analog telephone adapters, voice-over-broadband gateways, and industrial telephony interfaces. In each case, the SI3018-F-FS provides the global line-side DAA function while the companion modem or controller manages the digital side of the connection. Designers should match the complete SI3018 ordering code rather than selecting from the generic SI3018 family name alone. The F-FS device is listed in a 16-SOIC package, and related suffixes can indicate different ordering or packing arrangements. Review the manufacturer datasheet pin-description table and reference schematic before assigning PCB nets or selecting external line-interface components. This page organizes the SI3018-F-FS product information, sourced ordering references, package details, application guidance, and confirmed family alternatives into an engineering-oriented selection reference. It also distinguishes the target F-FS order code from related SI3018-F-FSR, SI3018-FS, SI3018-F-FT, and SI3018-F-FS-R catalog entries so procurement teams can request the exact device needed for a PCB revision.
SI3018-F-FT - Programmable Voice DAA | Skyworks Solutions
Skyworks Solutions Inc. SI3018-F-FT is a programmable direct access arrangement (DAA) integrated circuit for foreign exchange office analog line interfaces. It is associated with the Si3050 voice DAA chipset, uses V.92 data formatting, and is available in a 16-pin TSSOP package measuring approximately 0.173 inches by 4.40 mm in the listed package dimensions. The SI3018-F-FT is packaged in a tube and is identified as a lead-free, RoHS-compliant component. A direct access arrangement is a telephone subscriber-line interface that connects a voice codec or digital signal processor to an analog telephone line. Within the Si3050 chipset architecture, the SI3018-F-FT handles the line-side foreign exchange office functions while the companion Si3050 provides the central DAA functions. This separation allows a system architect to divide interface processing across dedicated devices and supports programmable voice-access designs. The SI3018-F-FT's principal documented functions include a programmable voice DAA interface, V.92 data formatting, an SPI control interface, and GCI support. It also participates in PCM highway and A-law companding data paths. These features place the device in line-side voice gateway, foreign exchange office, digital private exchange, and telephony interface equipment rather than general-purpose signal-processing applications. Programmability allows the associated voice interface to be configured through its control interface instead of relying only on fixed analog switching. In a complete design, the SI3018-F-FT is used alongside the Si3050 and an appropriate voice codec or digital signal processor. The manufacturer documentation also identifies the Si3010 and Si3019 line-side devices as compatible members of the Si3056 measurement ecosystem, illustrating the modular structure of the voice DAA product family. Typical implementations include voice over packet gateways, legacy telephone line adapters, central-office line cards, digital loopback equipment, and multichannel voice interface systems. System-level compatibility depends on the selected companion devices, the firmware configuration, country-specific line parameters, and compliance with the applicable network requirements. PCB design should preserve the pin assignments and layout guidance in the manufacturer datasheet. A 16-pin TSSOP footprint requires adequate pin escapes, a stable analog supply, careful grounding around line-interface circuitry, and protection appropriate to the external telephone line. The SI3018-F-FT is a line-side interface IC, so its own operating limits and the surrounding protection network must both be considered. This product summary consolidates the documented package, data-format, control-interface, packaging, and compliance characteristics with practical implementation guidance. It also identifies the closest confirmed package-matched ordering alternative while separating genuine pin-compatible choices from related devices that use different packages.
SI3018-F-GS - 3.3V Global Line-Side DAA | Skyworks Solutions
The Skyworks Solutions SI3018-F-GS is a 3.3 V global line-side Direct Access Arrangement (DAA) packaged in a 16-pin SOIC. It provides the analog line interface used with Si24xx modem platforms and belongs to the Si3050 voice DAA chipset family. The device is specifically described as a global line-side DAA for Si24xx modems, positioning it for foreign-exchange office and voice-access equipment requiring an integrated telephone-line interface. A Direct Access Arrangement is an integrated analog interface that connects a modem or voice system to a subscriber line. Within the product hierarchy, a DAA sits below a telecom interface IC, below an integrated circuit, and ultimately below the broader semiconductor category. Its practical role is to condition the line-side signal, support hook and loop-state detection, and provide the physical interface between the digital modem circuitry and the analog telephone network. The SI3018-F-GS is identified as a small 16-pin line-side device in the programmable voice DAA documentation. Manufacturer materials describe the Si3050 combination of one 16-pin small line-side device with system-side devices, allowing the modem platform to integrate more of the conventional voice interface than a simple discrete telephone-network adapter. This consolidation reduces the number of separate analog components normally required by a modem design. The -F variant supports 3.3 V operation, while the -GS suffix identifies the global line-side version listed by Skyworks Solutions. Distributor listings consistently identify the SI3018-F-GS in a 16-SOIC package, with tube packaging shown for the -GS orderable configuration. The compact surface-mount package allows the line-side interface to be placed alongside the modem controller, DSP, memory, and power-management circuitry on a dense communications board. Typical uses include foreign-exchange office modems, global line-card designs, voice-over-IP gateways with legacy line support, and other telecom endpoint equipment that connects a data or voice modem to an analog subscriber loop. In these systems, the SI3018-F-GS complements the modem's digital processing path with the analog line interface required to survive real-world telephone-network conditions. Use the manufacturer pin-description table and typical application circuit when assigning PCB tracks, because exact signal names, operating limits, and external-network connections are defined in the device documentation. Confirm country-specific line-interface requirements and the companion system-side device before releasing a production design, since global regulatory behavior can differ from region-specific variants.
SI3018-FS - Global V.92/V.34 DAA Interface IC | Skyworks
Skyworks Solutions, Inc. SI3018-FS is a programmable global line-side direct access arrangement interface IC for V.92 and V.34 modem designs, supplied in a 16-pin SOIC package. It integrates the telephone-line interface functions described in the manufacturer documentation and is associated with the Si3056 global DAA family. The SI3018-FS is intended to replace a discrete analog front end containing components such as isolation transformers, relays, opto-isolators, and a four-wire hybrid. A direct access arrangement, or DAA, is the telephone-line interface between a modem and the public switched telephone network. A DAA belongs to the broader category of telecom interface integrated circuits, where it sits between a data communications modem and the analog telephone line. Its primary purpose is to provide the required line termination, signal coupling, and isolation functions in a programmable integrated implementation. The verified manufacturer material identifies SI3018 as the global line-side device in the Si3056 family and states that the related Si3056 supports four AC termination impedances with the SI3018 line-side device. The SI3018-FS combines this global DAA positioning with V.92 and V.34 modem support. Its 16-pin SOIC package allows the device to be assembled with conventional surface-mount production equipment while reducing the external component count of a discrete telephone-line interface. The SI3018 family is associated with the Si3056 modem platform, which integrates modem functionality and a global DAA. Using a dedicated line-side interface can simplify modem board partitioning and reduce the amount of analog circuitry that must be laid out, tuned, and qualified. This is particularly relevant to compact modem, fax, voice-over-data, and embedded communication equipment that must connect to analog telephone networks. Designers must treat line-side telephone interfaces as isolated high-voltage domains. The SI3018-FS replaces several external isolation and hybrid components, but the application still requires correct line-side routing, separation from logic-side circuitry, approved protection components, and compliance with the applicable national telecommunications requirements. The available verified results do not provide the complete electrical limits or recommended component values. The principal selection trade-off is integration versus flexibility. The SI3018-FS is attractive when a design specifically targets its supported global line interface and modem ecosystem because it can reduce external parts and board area. Designs requiring different country-specific line parameters, AC termination impedances, or different modem interfaces should verify the exact ordering code and pin-level compatibility against the manufacturer datasheet before committing to a replacement. This page consolidates the verified distributor listings, manufacturer family data, package information, comparison fields, and practical sourcing guidance for the SI3018-FS. It also distinguishes confirmed ordering variants from unsupported assumptions, making it easier for engineers to identify whether a candidate is truly pin-compatible before modifying an existing telecom design.
SI3018-GS - 16-SOIC Telecom DAA Interface IC | Silicon Labs
Silicon Labs SI3018-GS is a telecom Direct Access Arrangement interface integrated circuit supplied in a 16-pin SOIC package. The verified product information identifies it as the SI2493 ISOmodem line-side device, with 16 terminations and a lead-free data sheet. It is intended for telephone-line interface and telecom equipment designs requiring a dedicated line-side DAA solution. The SI3018-GS belongs to the broader Direct Access Arrangement -> telephone-line interface -> telecom interface IC -> semiconductor hierarchy. A Direct Access Arrangement interface IC is the line-facing member of a subscriber-line or modem interface. It connects a communications system to an analog telephone line while supporting the signaling, isolation, and termination functions required by that line. The verified information identifies SI3018-GS as a 16-SOIC telecom interface and specifically associates it with the SI2493 ISOmodem line-side device, making it appropriate for legacy and established telephone-interface platforms rather than unrelated general-purpose interface products. The SI3018-GS provides 16 terminations and uses a 16-SOIC package. The verified sourcing results specifically describe it as a lead-free telecom interface IC and classify it as a Direct Access Arrangement device. These package and termination details are the principal verified features for comparing it with other line-side interface components. Its principal advantage is integration into a dedicated telecom interface role rather than requiring a collection of unrelated line-interface functions. Functionally, the SI3018-GS is associated with the SI2493 ISOmodem line-side architecture. The available manufacturer-family material identifies the SI3056 family as providing four AC termination impedances for SI3018 line-side devices and sixteen AC termination impedances for SI3019 line-side devices. This context establishes SI3018 as the lower-termination-count member of the referenced line-side family, while detailed operating conditions remain available through the linked Silicon Labs family document. Typical applications include analog telephone-line interfaces, customer-premises equipment, modem line-side designs, and telecom interface cards. In each case, the device is positioned on the line side of the communications architecture rather than directly beside a general-purpose digital processor. System designers must still verify line impedance, isolation, protection, ringing, and regulatory requirements against the applicable Silicon Labs documentation before releasing a production design. The principal design consideration is to use the exact SI3018-GS data sheet and pin configuration during schematic capture and PCB layout. Because the verified material confirms the 16-SOIC package but does not expose a complete numbered pin table, engineers should not infer pin assignments from generic DAA devices or from the SI3018-F-GS listing. Component sourcing and inventory status should also be checked before committing to a high-volume build. This product page combines the verified package classification, telecom-interface role, termination count, family relationships, distributor sources, and available drop-in references with practical selection guidance. It also distinguishes verified SI3018-GS information from unverified parameters that require confirmation from the manufacturer data sheet before design-in.
SI3018-KS - Telecom DAA Interface IC | Skyworks Solutions
The Skyworks Solutions SI3018-KS is a single-circuit telecom Direct Access Arrangement (DAA) interface IC designed for telecommunications equipment and voice-line interface applications. It is identified in distributor listings as a 16-SOIC packaged Telecom IC Direct Access Arrangement, with support for parallel, SPI, and UART interfaces. The device is associated with the Si3050 Global Serial Interface DAA family and is intended for line-side equipment requiring an integrated interface between a voice codec or digital voice channel and the analog telephone network. A Direct Access Arrangement is a telecom interface function that provides the physical and signaling interface between a digital voice system and a subscriber line. In this product category, the DAA IC handles the line-side interface duties required by telecommunications equipment. The SI3018-KS is consequently positioned within the broader hierarchy of integrated circuits, interface ICs, telecom interface ICs, and voice-access devices. The key verified features of SI3018-KS are its single-circuit DAA architecture, 16-SOIC surface-mount package, 3 V to 3.6 V supply range, 8.5 mA operating current, and parallel, SPI, and UART interface support. These characteristics make the component relevant to designs requiring a compact telecom line interface with multiple digital host-interface options. The Si3018 family documentation also identifies related line-side devices, including the Si3019 and Si3010, within the same broader telecom-interface product family. The SI3018-KS is useful when integrating a voice line card, voice gateway, digital loop carrier endpoint, or other telecom access circuit. Its supply range is compatible with common 3.3 V communication-system rails, while the SOIC package supports conventional surface-mount assembly. The selectable interface methods provide flexibility when connecting the DAA to a host controller, codec, or system bus. Because the available distributor data does not provide the complete electrical limits, timing characteristics, line-side impedance options, or detailed pin assignments, the manufacturer datasheet should be consulted before layout or production release. In particular, verify the external line-interface network, bypass-capacitor requirements, clocking, reset behavior, and all absolute maximum ratings for the specific revision. This page consolidates the verified manufacturer-family and distributor information for SI3018-KS, adds application guidance, comparison context, and design cautions, and distinguishes documented facts from parameters that still require confirmation from the datasheet.
SI3018-KT - V.92 Global Serial Interface DAA | Skyworks
The Skyworks Solutions, Inc. SI3018-KT is a V.92 global serial interface direct access arrangement, or DAA, integrated into a 16-pin TSSOP surface-mount package measuring 0.173 inch, or 4.40 mm, in width. The device provides an 80 dB dynamic range across its transmit and receive paths and incorporates an integrated codec, a 2-wire to 4-wire hybrid, AC and DC termination, a ring detector, and telephone-line interface functions. These features place the SI3018-KT in the line-side interface IC category used to connect a digital voice system to an analog telephone network. A direct access arrangement is an interface integrated circuit that combines codec, line-driver, line-receiver, hybrid, and telephone-line termination functions that otherwise require several discrete or separate IC blocks. The DAA category belongs to the broader telecom interface IC hierarchy, which connects host digital signals to analog transmission channels. The SI3018-KT is intended for voice and data applications requiring a compact implementation of a V.92 line-side interface. The principal documented features include V.92 data-format support, an 80 dB dynamic range for the TX/RX paths, selectable AC and DC termination, a configurable ring-detect threshold, ringer-impedance support, an integrated codec, and an integrated 2-wire to 4-wire hybrid. Combining these functions reduces the number of external line-interface components and simplifies telephone-line equipment while preserving the separation between the digital host interface and the analog PSTN line. The SI3018-KT architecture places the codec and telephone-line interface functions in one IC rather than requiring separate codec, hybrid, and termination devices. This integration is particularly useful where board area is constrained, such as modems, voice gateways, terminal adapters, and compact customer-premises equipment. The 16-TSSOP package is supplied in tube packaging according to the available distributor specification, and the reported package width is 4.40 mm. Typical application areas include central-office line-card equipment, remote terminal units, voice-over-data gateways, fax and modem interfaces, and other telephone-network access products. In each case, the device can serve as the line-side interface between a digital processor and an analog telephone line while providing integrated signaling, codec, and hybrid functions. The primary design consideration is exact interface verification. Designers should confirm the exposed pad requirements, supply rails, digital host interface, termination configuration, ring-detection thresholds, and hook-state behavior against the manufacturer datasheet before layout release. PCB signal integrity is particularly important on analog line and hybrid networks, so the layout should preserve the manufacturer-recommended component placement and grounding topology. This product page consolidates the verified distributor specifications, official Skyworks family-document references, commercial availability information, interface-function details, and practical design cautions. It also distinguishes documented SI3018-KT characteristics from unreported voltage, current, temperature, and absolute-maximum data so engineers can make procurement and design decisions without treating unverified figures as guaranteed specifications.
SI3019-F-FS - Programmable Voice DAA | Skyworks Solutions
The Skyworks Solutions SI3019-F-FS is a programmable telecom Direct Access Arrangement (DAA) providing the line-side analog FXO interface for the Si3050 voice DAA chipset. It operates with the Si3011, Si3018, or Si3019 companion devices in a 16-pin SOIC package. The SI3019-F-FS combines telephone-line interface functionality with programmable control for globally compliant voice systems. A Direct Access Arrangement, or DAA, is the line-side interface between a telephone network and a host voice processor. It belongs to the broader telecom interface IC hierarchy, where it bridges analog subscriber-line signals and a digital voice-processing platform. In the Si3050 chipset architecture, the DAA performs the physical-layer functions required to connect to an analog foreign-exchange-office line while the host controls device operation and voice processing. Programmability is the principal feature of the SI3019-F-FS. It allows the line interface to be adapted to different international line conditions and helps support compliant, globally deployable voice equipment. The device is intended to work with the Si3050 chipset, while the Si3011, Si3018, and Si3019 devices provide related interface options within the voice-DAA product family. Its 16-pin SOIC package supports conventional surface-mount PCB assembly. The SI3019-F-FS separates analog subscriber-line handling from the digital voice-processing functions performed elsewhere in the chipset. That division allows a modular design in which the host processor manages call-control tasks while the DAA handles the electrical connection to the line. Integration can also reduce the number of discrete telephone-interface components compared with a discrete line implementation. Typical uses include Voice over IP phones, analog telephone adapters, fax and multifunction-printer line interfaces, voice gateways, and embedded telephony equipment. The SI3019-F-FS is particularly relevant when a product must retain an analog PSTN connection while using a programmable host processor for supervision, signaling, and voice processing. PCB implementation should preserve short, well-controlled connections around the analog line interface and follow the pin and layout guidance in the manufacturer datasheet. Because subscriber-line interfaces handle sensitive and potentially high-voltage signals, component placement, isolation boundaries, grounding, and protection must be designed for the complete telephone-network environment rather than treated as an ordinary low-voltage signal path. This product record combines package, chipset-role, sourcing, and substitution information with practical design guidance. It also identifies the limits of readily published technical information, helping engineers evaluate the SI3019-F-FS for Voice over IP, analog telephone, gateway, and embedded telephony designs before beginning a board-level implementation.
SI3019-F-FT - 3.3V Global Line-Side DAA | Skyworks
The Skyworks Solutions Inc. SI3019-F-FT is a 3.3 V global line-side direct access arrangement, or DAA, interface IC designed for foreign exchange office and voice-line equipment. It operates from a 3 V supply, consumes approximately 8.5 mA, supports a commercial temperature range of 0°C to +70°C, and is packaged in a 16-pin TSSOP. The device provides the line-side analog interface functions required by a host voice system. A direct access arrangement is a line-side interface integrated circuit that connects a telephone line to a digital voice processor. In the system hierarchy, a DAA is a specialized telecom interface IC within the broader interface-IC and communication-semiconductor categories. Its purpose is to present a controlled line-side interface to the voice-processing chipset while providing the programming and status controls needed for line supervision and global telephony operation. The SI3019-F-FT is part of the programmable voice DAA solution associated with the Si3050, Si3011, Si3018, and Si3019 devices. According to the manufacturer datasheet, the chipset architecture supports GCI, PCM, and SPI interface arrangements. Programmable operation allows the same line-side design approach to be adapted across different country and network requirements, reducing the need for numerous fixed-function analog front-end designs. This 16-pin TSSOP implementation integrates the line-side interface into a compact surface-mount package. The SI3019-F-FT operates from 3 V and 3.6 V supply conditions identified in the product documentation, with approximately 8.5 mA current consumption. These characteristics suit modern voice-processing platforms where component count, board area, and system power are important design constraints. The commercial-grade temperature range of 0°C to +70°C targets indoor commercial telecom equipment. Typical uses include foreign exchange office equipment, voice gateways, digital loop carriers, terminal adapters, and other PSTN-to-digital voice systems. In a Si3050-based design, the SI3019 handles the line-side interface while the companion controller manages digital voice processing and host communication. The combination can replace discrete line-interface networks that would otherwise require protection, sensing, codec-interface, and control components. Careful PCB design is essential because line-side interfaces combine low-level analog signaling with digital control. Place the SI3019-F-FT close to its companion voice ICs, keep sensitive line-side traces short, provide a stable low-noise supply connection, and follow the manufacturer reference layout for isolation-capacitor and line-network routing. Confirm country-specific line impedance, ringing voltage, surge requirements, and regulatory limits for every target market. This product page combines the confirmed electrical, package, thermal, interface, and commercial-ordering characteristics with practical design guidance for the Si3050 voice-DAA platform. It also distinguishes the 16-pin TSSOP SI3019-F-FT from related package variants so engineers can make a footprint-compatible sourcing decision without confusing reel-packaging codes or different lead configurations.
SI3019-F-GM Programmable Telecom DAA | Skyworks Solutions
Skyworks Solutions SI3019-F-GM is a programmable telecom Direct Access Arrangement integrated circuit designed for globally compliant foreign exchange office analog interfaces. It supports 20-pin QFN packaging in a 3 mm × 3 mm footprint and operates from a 3.3 V supply according to the product listing. The SI3019 line-side device is used with the Si3050 controller in programmable Voice DAA solutions for telephone line interface and foreign exchange equipment. A Direct Access Arrangement, or DAA, is the analog interface between a telephone line and a digital communications controller. It handles the line-side signaling and current-control functions required to connect digital equipment to a foreign exchange line. Within the equipment hierarchy, the DAA is an interface IC: the Si3050 interprets and generates protocol-level signaling, while the SI3019 provides the physical analog interface to the line. The SI3019 family is designed for programmable voice DAA solutions. Its supporting device, the Si3050, can measure line voltage when paired with an SI3011 or SI3019 line-side device. The SI3019 additionally provides an LCS2 register that reports loop current at a finer resolution than the Si3050 can measure by itself. This division of responsibility supports firmware-configurable line monitoring in telephony systems. Compliance and regional line behavior are central to this product category because telephone interfaces must operate across different line voltages, loop currents, and signaling conventions. The manufacturer describes the Si3050 and SI3011, SI3018, and SI3019 chipset as highly programmable and globally compliant. A compact 20-QFN package also supports space-constrained designs where a larger SOIC footprint would be undesirable. Typical uses include foreign exchange office line cards, voice-over-IP terminal adapters, embedded telephony gateways, digital PBX interfaces, and other equipment that connects digital voice circuitry to an analog telephone line. The SI3019 is positioned at the line-facing edge of the circuit, while the Si3050 and surrounding system electronics perform control and signal processing. Designers should treat the SI3019 and Si3050 as a coordinated chipset rather than selecting them independently. Review the manufacturer’s Si3050 and SI3011, SI3018, SI3019 datasheet for the complete pin list, electrical limits, application circuit, and layout requirements. The 3 mm × 3 mm QFN land pattern also requires careful thermal-pad, solder, and trace-layout implementation. This page organizes the verified product identity, package information, chipset relationship, sourcing links, and engineering guidance around the SI3019-F-GM. It also distinguishes direct drop-in replacements from related package variants and identifies the decisions that must be checked before changing a telecom line-interface design.
SI3019-F-GS Global Line-Side DAA | Skyworks Solutions
The Skyworks Solutions, Inc. SI3019-F-GS is a global line-side Direct Access Arrangement, or DAA, for programmable voice interfaces, housed in a 16-pin SOIC package. It is designed for use with the Si3050 voice interface platform and supports telecom line-side signal handling through the manufacturer’s programmable voice DAA solution family. The device is associated with global line-side operation, SPI control, PCM highway data, and A-law companding functionality. A Direct Access Arrangement is a telecommunications interface integrated circuit that provides the physical line-side interface between a voice codec or voice processing channel and a subscriber line. In the broader system hierarchy, a DAA is an interface IC within a programmable voice subsystem. It differs from a basic codec because it addresses line-interface requirements such as line voltage, loop current, and voice-path integration while relying on a companion controller for configuration and supervision. The SI3019-F-GS operates with the Si3050 family, and the manufacturer documentation identifies features including a PCM highway data interface, SPI control, a GCI interface, and A-law companding. The Si3019 also adds a finer loop-current reporting register through the LCS2 byte, while the Si3050 performs line-voltage measurement when used with the Si3011 or Si3019 line-side device. These functions support compact voice-channel implementations in analog telephone equipment and voice-processing platforms. This component is particularly relevant to legacy and industrial voice systems that require a dedicated global line-side DAA rather than a general-purpose codec. The 16-pin SOIC package supports conventional surface-mount assembly, while the SPI-based control architecture allows firmware-driven configuration. Designers must observe the line-side power, protection, grounding, and signal-integrity requirements described in the manufacturer’s reference application material. Typical uses include voice interface cards, analog telephone adapters, central-office line-card equipment, embedded voice gateways, and telecom test equipment. In these systems, the SI3019-F-GS can pair with the Si3050 to implement a controlled PCM voice path while separating line-side interface functions from the host processor. Design guidance should focus on the exact reference schematic, external protection network, supply sequencing, and decoupling values in the manufacturer datasheet. The product-discontinuation notice also defines a 48-unit minimum buy quantity for SI3019-F-GS orders, so supply planning should account for constrained rather than routine production availability. This product summary combines package, family, interface, compatibility, and lifecycle information with practical sourcing guidance. It also distinguishes same-footprint alternatives from variants using different packages, helping engineers identify genuine replacement options before committing a voice-interface board to production.
SI3019-F-GT Global Line-Side DAA | Skyworks Solutions
The Skyworks Solutions SI3019-F-GT is a programmable global line-side Direct Access Arrangement integrated circuit designed for the Si3050 voice DAA chipset, with a 16-TSSOP package, a 3 V to 3.6 V supply range, and a -40°C to 85°C operating-temperature range. It provides the analog foreign-exchange-office interface between a voice system and a telephone line. A Direct Access Arrangement, or DAA, is a line-side interface circuit that converts digital voice data into an analog telephone signal and receives analog line signals for conversion back into digital data. Within the telecommunications hierarchy, the DAA is a telecom interface IC connected to a host controller such as the Si3050, with the combined devices implementing a programmable global voice interface. The SI3019-F-GT supports a PCM highway data interface, μ-law and A-law companding, an SPI control interface, and a GCI interface. According to the Skyworks Solutions manufacturer datasheet, it also provides 80 dB dynamic range, transmit and receive line-voltage monitoring, loop-current monitoring, selectable +6 dBm or +3.2 dBm transmit and receive levels, and parallel handset detection. These functions support centralized configuration, international line adaptation, and supervision of the telephone interface. The device separates line-side signal handling from host-side control. The Si3050 manages voice-channel processing and digital signaling, while the SI3019-F-GT handles the analog line interface, level control, line-state measurement, and loop-current detection. This division supports programmable voice systems for voice-over-IP gateways, digital loop carriers, customer premises equipment, and other foreign-exchange-office products. Typical applications include voice gateways, Voice-over-IP adapters, digital loop carrier line cards, embedded voice servers, and telephony access equipment. The 16-TSSOP package is suitable for conventional surface-mount PCB assembly, while its 80 dB dynamic range provides headroom for voice-band signal chains. Global companding support and selectable line levels make the device useful in systems intended for multiple regional telephone standards. Designers should place the SI3019-F-GT close to the line-interface protection and network-side components, maintain short analog signal paths, and follow the manufacturer’s recommended external component values and PCB layout. The 3 V to 3.6 V supply range requires a regulated rail compatible with the associated Si3050 controller and the complete voice-interface subsystem. This product page combines the SI3019-F-GT interface capabilities, package characteristics, application guidance, lifecycle information, and verified cross-reference results. It also explains when this discontinued family member should be selected for an existing design and when a redesign is more appropriate.