بەرهەمەکان (5,100+)

ADV7343WBSTZ - 6-Channel 11-Bit Video Encoder | Analog Devices
ADV7343WBSTZ

ADV7343WBSTZ - 6-Channel 11-Bit Video Encoder | Analog Devices

Analog Devices ADV7343WBSTZ is a multiformat video encoder with six 11-bit, 297 MHz digital-to-analog converters in a 64-lead LQFP package measuring 10 x 10 mm. The converter operates from a 3.3 V supply and can produce composite CVBS, S-Video Y/C, and component YPrPb or RGB analog outputs for standard-definition, enhanced-definition, and high-definition video systems. A video encoder is an interface IC that converts digital video data into analog signals suitable for display, recording, broadcast, or video-processing equipment. Within the broader semiconductor hierarchy, the ADV7343 belongs to the video converter class, combining multiple high-speed DAC channels with digital video timing and output-control functions. This integration allows digital video systems to retain analog downstream interfaces without requiring six discrete converter packages. Six separate 11-bit DACs provide the channels needed to generate composite, S-Video, and component video simultaneously or under software control. The manufacturer identifies the DAC conversion rate as 297 MHz and the maximum analog output as 1.4 V. A listed linearity error of 0.0244% supports accurate signal generation, while the 3.3 V operating supply simplifies integration with contemporary digital video logic. The ADV7343 architecture is organized around a high-speed digital video input, programmable output and filtering functions, and six parallel video DACs. Its supported output formats include CVBS, S-Video, and component YPrPb/RGB, with operation covering standard-definition, enhanced-definition, and high-definition content. This broad format support makes one encoder useful in set-top equipment, DVD and Blu-ray playback systems, professional video processing, and broadcast infrastructure. The device is particularly appropriate when a system must convert digital video into several analog representations. A DVD or Blu-ray player can use it for legacy composite and S-Video compatibility, while a professional video processor can exploit component RGB or YPrPb outputs. The six-channel implementation also avoids the routing and component-count burden of multiple discrete video DACs. PCB design should preserve high-speed signal integrity around the digital input, clock, control, and analog output pins. Follow the Analog Devices datasheet pin-description table for the 64-lead LQFP assignments, route clocks away from analog outputs, and place bypass and interface components according to the manufacturer reference circuit. The industrial temperature range of -40°C to +85°C supports commercial and industrial equipment, although the manufacturer marks the ADV7343 as not recommended for new designs. This page consolidates the verified manufacturer and distributor information into an engineering-focused record of formats, converter resolution, package details, lifecycle position, sourcing questions, and design considerations. It also distinguishes confirmed pin-compatible substitutions from catalog entries that do not establish electrical equivalence, helping engineers avoid treating a superficially similar encoder as a true drop-in replacement.

RFQ پەیوەندی
ADV7390BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7390BCPZ

ADV7390BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The Analog Devices ADV7390BCPZ is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V/3.3 V digital-to-analog converters, supplied in a 32-lead LFCSP-VQ package measuring 5 mm by 5 mm. It converts digital video into composite CVBS and Y-C component video signals for DVD equipment, game consoles, media players, and related consumer video systems. A video encoder is an interface integrated circuit that translates digital pixel data into analog video waveforms. Within the broader signal-processing hierarchy, the ADV7390BCPZ combines digital-to-analog conversion, filtering, output-driver circuitry, and video-timing control. Its three converter channels support composite and S-Video output formats, allowing multiple standard-definition signals to be generated from one compact device. The principal advantages are the 10-bit conversion resolution, integration of three video DACs, operation from 2.7 V or 3.3 V, and low-power chip-scale construction. The 5 mm by 5 mm LFCSP-VQ package reduces board area compared with discrete video-output circuitry. Its three-channel architecture also simplifies analog routing while preserving separate outputs for composite and Y-C video signals. Analog Devices describes the device as a high-speed digital-to-analog video encoder suitable for SD and HD video encoding. The manufacturer datasheet contains configuration, register, timing, and electrical details needed for firmware and hardware implementation. Designers should use the register descriptions and timing diagrams when configuring output formats, blanking levels, sync generation, and power-control behavior. Typical uses include DVD players, game consoles, media players, set-top equipment, video test systems, and industrial or professional video products that require standardized analog video outputs. The ADV7390BCPZ is particularly appropriate where multiple analog video channels, compact PCB area, and 10-bit output resolution are more important than support for new video-encoder designs. The principal design consideration is package and power planning. The LFCSP-VQ footprint requires careful pad layout, thermal-via placement, and clean analog routing around the video outputs. Power-supply design must accommodate the specified 2.7 V or 3.3 V operating condition, while the application circuit should follow Analog Devices reference guidance for decoupling, grounding, and output-network implementation. This product page combines the manufacturer specifications, sourcing information, interface guidance, and application-oriented design guidance for engineers evaluating the ADV7390BCPZ. Because Analog Devices marks the device as not recommended for new designs, it is best suited to maintaining existing SD or HD video products, repairing established equipment, or supporting a legacy platform with controlled lifecycle requirements.

RFQ پەیوەندی
ADV7390BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)
ADV7390BCPZ-REEL

ADV7390BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

The Analog Devices ADV7390BCPZ-REEL is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V/3.3 V digital-to-analog converters, supplied in a 32-lead LFCSP-VQ package measuring 5 mm by 5 mm. It converts digital video into composite CVBS and Y-C component video signals for DVD equipment, game consoles, media players, and related consumer video systems. A video encoder is an interface integrated circuit that translates digital pixel data into analog video waveforms. Within the broader signal-processing hierarchy, the ADV7390BCPZ-REEL combines digital-to-analog conversion, filtering, output-driver circuitry, and video-timing control. Its three converter channels support composite and S-Video output formats, allowing multiple standard-definition signals to be generated from one compact device. The principal advantages are the 10-bit conversion resolution, integration of three video DACs, operation from 2.7 V or 3.3 V, and low-power chip-scale construction. The 5 mm by 5 mm LFCSP-VQ package reduces board area compared with discrete video-output circuitry. Its three-channel architecture also simplifies analog routing while preserving separate outputs for composite and Y-C video signals. Analog Devices describes the device as a high-speed digital-to-analog video encoder suitable for SD and HD video encoding. The manufacturer datasheet contains configuration, register, timing, and electrical details needed for firmware and hardware implementation. Designers should use the register descriptions and timing diagrams when configuring output formats, blanking levels, sync generation, and power-control behavior. Typical uses include DVD players, game consoles, media players, set-top equipment, video test systems, and industrial or professional video products that require standardized analog video outputs. The ADV7390BCPZ-REEL is particularly appropriate where multiple analog video channels, compact PCB area, and 10-bit output resolution are more important than support for new video-encoder designs. The principal design consideration is package and power planning. The LFCSP-VQ footprint requires careful pad layout, thermal-via placement, and clean analog routing around the video outputs. Power-supply design must accommodate the specified 2.7 V or 3.3 V operating condition, while the application circuit should follow Analog Devices reference guidance for decoupling, grounding, and output-network implementation. This product page combines the manufacturer specifications, sourcing information, interface guidance, and application-oriented design guidance for engineers evaluating the ADV7390BCPZ-REEL. Because Analog Devices marks the device as not recommended for new designs, it is best suited to maintaining existing SD or HD video products, repairing established equipment, or supporting a legacy platform with controlled lifecycle requirements.

RFQ پەیوەندی
ADV7390WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7390WBCPZ

ADV7390WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The Analog Devices ADV7390WBCPZ is a low-power, chip-scale 10-bit SD/HD video encoder with three integrated DACs, supplied in a 32-lead LFCSP package measuring 5 mm by 5 mm. The device converts digital video into composite CVBS and S-Video Y-C outputs for DVD equipment, game consoles, and media-player systems. A video encoder is a mixed-signal semiconductor that translates digital pixels into standard-definition analog video waveforms. Within the signal-chain hierarchy, the ADV7390 belongs to the video-processing IC class and ultimately to the broader data-converter and signal-processing IC category. Its integrated DAC architecture combines digital timing generation, clock recovery, color processing, and analog output stages to reduce the component count required for composite-video output. Three 2.7 V or 3.3 V video DACs provide the core analog outputs. The encoder supports composite and S-Video operating modes, while a 16-times or 4-times oversampling PLL supports internal clock generation from the digital video interface. Power-management controls support low-power operation, and the device includes cable-detection capability. The family documentation also identifies synchronization controls for reset, horizontal sync, and vertical sync. The ADV7390 architecture is organized around a video timing generator, an 11-bit internal DAC datapath, a three-channel output multiplexer, and a reference and cable-detect section. Although the device is marketed as a 10-bit video encoder, the internal DAC structure includes an 11-bit stage, allowing the encoder to generate composite CVBS and S-Video outputs with reduced intermediate digital processing. Typical deployments include DVD players, game consoles, media players, industrial video equipment, and legacy analog-video conversion products. The small 5 mm by 5 mm LFCSP package supports compact consumer-electronics layouts, although careful decoupling and thermal design remain necessary around the analog output circuitry. When designing a new product, confirm that the ADV7390 is appropriate for the target channel standard and system lifecycle because Analog Devices marks it as not recommended for new designs. Existing equipment can still benefit from its three-DAC integration, but new platforms should evaluate current encoder families when long-term supply is a priority. This page combines manufacturer documentation, lifecycle information, drop-in family alternatives, package guidance, and application-oriented engineering notes to support board-level sourcing and design decisions.

RFQ پەیوەندی
ADV7390WBCPZ-RL - 10-Bit 3-Channel Video Encoder | ADI
ADV7390WBCPZ-RL

ADV7390WBCPZ-RL - 10-Bit 3-Channel Video Encoder | ADI

The Analog Devices ADV7390WBCPZ-RL is a 10-bit, three-channel digital-to-analog video encoder operating from a 2.7 V or 3.3 V supply and packaged in a 32-lead LFCSP measuring 5 mm by 5 mm. It converts digital video into composite CVBS and S-Video Y-C outputs through three integrated video DACs. The device is positioned for DVD players, game consoles, media players, portable video equipment, and other systems requiring low-power SD video generation. A video encoder is a data-converter IC that accepts digital pixel data and produces analog television signals. Within the broader signal-chain hierarchy, digital video input passes through a video encoder, its 10-bit DACs reconstruct the analog waveforms, and external filtering or connector networks deliver the result to a display or television equipment. The ADV7390 combines that conversion function in one monolithic IC while requiring relatively few external components. Three 10-bit video DAC channels form the core of the encoder. The manufacturer identifies support for composite CVBS and S-Video Y-C outputs, including NTSC and PAL composite formats. Operation from either 2.7 V or 3.3 V provides flexibility for compact consumer and industrial equipment. The low-power, chip-scale implementation is particularly useful where board area and energy consumption constrain the design. The ADV7390 belongs to a broader family of high-speed video encoders that also includes ADV7391, ADV7392, and ADV7393. Device selection within the family depends on the required combination of composite, S-Video, component-video, or other supported outputs and the associated feature set. For the ADV7390WBCPZ-RL specifically, the three-DAC architecture provides parallel conversion paths while the 10-bit quantization establishes the nominal video-data resolution. Typical implementations include analog television output for a DVD player, composite or S-Video connection from a game console, media-player video output, portable equipment with a TV-out function, and industrial monitoring or professional video systems that require a dedicated 10-bit encoding stage. The analog output path still requires the recommended passive networks and good PCB signal routing to achieve predictable video quality. Place the encoder near its digital-video source and analog output networks, and route each analog channel away from noisy switching nodes and digital clock signals. Pay particular attention to ground return paths, supply bypassing, and the impedance of the output network. The manufacturer's family datasheet and pin-description table should govern PCB land patterns, exposed-pad connection, and test-point access. This product page consolidates the verified device identity, package information, supported video functions, lifecycle information, and practical integration guidance. It also identifies family-level drop-in candidates separately from confirmed cross-brand equivalents, helping engineers evaluate PCB reuse without treating package similarity alone as proof of functional interchangeability.

RFQ پەیوەندی
ADV7391BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7391BCPZ

ADV7391BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The ADV7391BCPZ is a low power, chip scale 10-bit SD/HD video encoder from Analog Devices, designed for converting digital video data into analog composite (CVBS), S-Video (Y-C), or component (YPrPb) signals. It integrates three 2.7 V/3.3 V 10-bit video DACs on a single monolithic chip, supporting a wide range of video standards including NTSC, PAL, and 720p/1080i HDTV formats. The device operates from a 1.71 V to 3.63 V supply, draws only 81 mA typical current, and is housed in a compact 32-lead LFCSP-VQ (5x5 mm) package, making it ideal for space-constrained applications. A video encoder is an integrated circuit that converts digital video data into analog video signals for display or transmission. It sits between a digital video source (such as a processor, FPGA, or camera) and an analog display or recording device. The ADV7391 belongs to the video encoder family, which is a subset of interface ICs, and ultimately falls under the broader category of mixed-signal semiconductors. Understanding this hierarchy helps engineers place the component within a system's signal chain. Key features of the ADV7391BCPZ include three 10-bit DACs with a sampling rate of 297 Msps, enabling high-definition video output. It supports both SD and HD formats, with automatic detection of input video standards. The device also includes a programmable filter for image enhancement, and a flexible digital input interface that accepts 8-bit or 16-bit data with separate HSYNC and VSYNC signals. Its low power consumption of 81 mA makes it suitable for battery-powered or thermally constrained designs. Technically, the ADV7391 uses a high-speed digital-to-analog conversion architecture with on-chip interpolation filters to reduce image artifacts. The three DACs can be configured independently, allowing simultaneous CVBS and S-Video outputs, or component YPrPb output. The device operates over the industrial temperature range of -40°C to +85°C, ensuring reliability in harsh environments. The LFCSP package provides excellent thermal performance and a small footprint, with an exposed pad for enhanced heat dissipation. Typical applications include set-top boxes, video players, displays, surveillance systems, and video conferencing equipment. The ADV7391 is particularly well-suited for designs that require both SD and HD analog output from a single chip, such as multi-standard video converters. Its low power and small size also make it attractive for portable video devices. When designing with the ADV7391, ensure proper decoupling of the power supply pins with 0.1 uF capacitors placed close to the device. The digital input timing must match the device's requirements for PCLK, HSYNC, and VSYNC to avoid glitches. Also, note that the ADV7391 is not recommended for new designs (NRND), so consider alternative parts for new projects.

RFQ پەیوەندی
ADV7391BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)
ADV7391BCPZ-REEL

ADV7391BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

The ADV7391BCPZ-REEL is a low power, chip scale 10-bit SD/HD video encoder from Analog Devices, designed for converting digital video data into analog composite (CVBS), S-Video (Y-C), or component (YPrPb) signals. It integrates three 2.7 V/3.3 V 10-bit video DACs on a single monolithic chip, supporting a wide range of video standards including NTSC, PAL, and 720p/1080i HDTV formats. The device operates from a 1.71 V to 3.63 V supply, draws only 81 mA typical current, and is housed in a compact 32-lead LFCSP-VQ (5x5 mm) package, making it ideal for space-constrained applications. A video encoder is an integrated circuit that converts digital video data into analog video signals for display or transmission. It sits between a digital video source (such as a processor, FPGA, or camera) and an analog display or recording device. The ADV7391 belongs to the video encoder family, which is a subset of interface ICs, and ultimately falls under the broader category of mixed-signal semiconductors. Understanding this hierarchy helps engineers place the component within a system's signal chain. Key features of the ADV7391BCPZ-REEL include three 10-bit DACs with a sampling rate of 297 Msps, enabling high-definition video output. It supports both SD and HD formats, with automatic detection of input video standards. The device also includes a programmable filter for image enhancement, and a flexible digital input interface that accepts 8-bit or 16-bit data with separate HSYNC and VSYNC signals. Its low power consumption of 81 mA makes it suitable for battery-powered or thermally constrained designs. Technically, the ADV7391 uses a high-speed digital-to-analog conversion architecture with on-chip interpolation filters to reduce image artifacts. The three DACs can be configured independently, allowing simultaneous CVBS and S-Video outputs, or component YPrPb output. The device operates over the industrial temperature range of -40°C to +85°C, ensuring reliability in harsh environments. The LFCSP package provides excellent thermal performance and a small footprint, with an exposed pad for enhanced heat dissipation. Typical applications include set-top boxes, video players, displays, surveillance systems, and video conferencing equipment. The ADV7391 is particularly well-suited for designs that require both SD and HD analog output from a single chip, such as multi-standard video converters. Its low power and small size also make it attractive for portable video devices. When designing with the ADV7391, ensure proper decoupling of the power supply pins with 0.1 uF capacitors placed close to the device. The digital input timing must match the device's requirements for PCLK, HSYNC, and VSYNC to avoid glitches. Also, note that the ADV7391 is not recommended for new designs (NRND), so consider alternative parts for new projects.

RFQ پەیوەندی
ADV7392BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7392BCPZ

ADV7392BCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

Analog Devices ADV7392BCPZ is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V or 3.3 V video DACs, supplied in a 40-LFCSP-WQ package measuring 6 mm by 6 mm. The device converts digital video signals into composite and S-Video outputs and is intended for DVD equipment, game consoles, media players, and other standard-definition or high-definition video systems. A video encoder is a signal-conversion integrated circuit that accepts digital pixel data and produces analog video suitable for display equipment or downstream transmission. In the broader product hierarchy, the ADV7392 belongs to video interface ICs, interface ICs, and integrated circuits. Its three internal DACs reduce the number of external video output stages required when a system must generate multiple analog video channels. The principal features of the ADV7392 include 10-bit video conversion, three integrated video DACs, operation from 2.7 V or 3.3 V, support for composite CVBS and S-Video, and a compact chip-scale package. These characteristics make the encoder useful where multiple analog video outputs must be generated without relying entirely on discrete DAC implementations. The low-power design is also relevant to portable and space-constrained media equipment. The ADV7390, ADV7391, ADV7392, and ADV7393 form a related family of monolithic high-speed digital-to-analog video encoders. The ADV7392 variant includes three 2.7 V or 3.3 V, 10-bit video DACs. Its pipeline timing is relevant to system integration because a falling HSYNC edge into the encoder produces a corresponding falling edge on the tri-level synchronization output after the pipeline delay defined in the manufacturer data sheet. Typical applications include DVD players, game consoles, media players, SD-video equipment, HD-video equipment, and multi-output analog video systems. In each case, the device serves as the final digital-to-analog conversion stage, with downstream circuitry handling output coupling, termination, filtering, or connector routing. Designers should treat the 6 mm by 6 mm LFCSP footprint as a compact but routed-layout challenge. PCB traces, bypass capacitors, analog video outputs, digital inputs, control signals, and power connections must be assigned according to the manufacturer pin-description table. Output filtering and impedance requirements should be derived from the data sheet rather than copied from a generic composite-video circuit. This page combines the manufacturer product information, family-level architectural context, package details, application guidance, and a strict drop-in comparison framework. It also identifies where device-specific electrical limits and pin assignments must be confirmed in the official ADV7390/ADV7391/ADV7392/ADV7393 data sheet before release to production.

RFQ پەیوەندی
ADV7392BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)
ADV7392BCPZ-REEL

ADV7392BCPZ-REEL - 10-Bit SD/HD Video Encoder | Analog Devices (Tape & Reel)

Analog Devices ADV7392BCPZ-REEL is a low-power, chip-scale 10-bit SD/HD video encoder with three 2.7 V or 3.3 V video DACs, supplied in a 40-LFCSP-WQ package measuring 6 mm by 6 mm. The device converts digital video signals into composite and S-Video outputs and is intended for DVD equipment, game consoles, media players, and other standard-definition or high-definition video systems. A video encoder is a signal-conversion integrated circuit that accepts digital pixel data and produces analog video suitable for display equipment or downstream transmission. In the broader product hierarchy, the ADV7392 belongs to video interface ICs, interface ICs, and integrated circuits. Its three internal DACs reduce the number of external video output stages required when a system must generate multiple analog video channels. The principal features of the ADV7392 include 10-bit video conversion, three integrated video DACs, operation from 2.7 V or 3.3 V, support for composite CVBS and S-Video, and a compact chip-scale package. These characteristics make the encoder useful where multiple analog video outputs must be generated without relying entirely on discrete DAC implementations. The low-power design is also relevant to portable and space-constrained media equipment. The ADV7390, ADV7391, ADV7392, and ADV7393 form a related family of monolithic high-speed digital-to-analog video encoders. The ADV7392 variant includes three 2.7 V or 3.3 V, 10-bit video DACs. Its pipeline timing is relevant to system integration because a falling HSYNC edge into the encoder produces a corresponding falling edge on the tri-level synchronization output after the pipeline delay defined in the manufacturer data sheet. Typical applications include DVD players, game consoles, media players, SD-video equipment, HD-video equipment, and multi-output analog video systems. In each case, the device serves as the final digital-to-analog conversion stage, with downstream circuitry handling output coupling, termination, filtering, or connector routing. Designers should treat the 6 mm by 6 mm LFCSP footprint as a compact but routed-layout challenge. PCB traces, bypass capacitors, analog video outputs, digital inputs, control signals, and power connections must be assigned according to the manufacturer pin-description table. Output filtering and impedance requirements should be derived from the data sheet rather than copied from a generic composite-video circuit. This page combines the manufacturer product information, family-level architectural context, package details, application guidance, and a strict drop-in comparison framework. It also identifies where device-specific electrical limits and pin assignments must be confirmed in the official ADV7390/ADV7391/ADV7392/ADV7393 data sheet before release to production.

RFQ پەیوەندی
ADV7392WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices
ADV7392WBCPZ

ADV7392WBCPZ - 10-Bit SD/HD Video Encoder | Analog Devices

The Analog Devices ADV7392WBCPZ is a low-power, chip-scale, 10-bit SD/HD video encoder packaged in a 40-LFCSP-WQ 6 mm × 6 mm surface-mount package. The device belongs to the ADV7390, ADV7391, ADV7392, and ADV7393 family of high-speed digital-to-analog video encoders and uses three 2.7 V or 3.3 V, 10-bit video DACs to generate analog composite and S-Video outputs. A video encoder is a data-converter IC that accepts digital video pixel data and converts it into analog video signals suitable for composite or S-Video equipment. Within the signal-chain hierarchy, the ADV7392 is a video encoder, an interface IC, and a data-converter IC. Its DAC-based output stage bridges digital video-processing circuitry and legacy analog displays, televisions, DVD equipment, game consoles, and media players. Principal characteristics include 10-bit video DAC resolution, support for SD and HD video formats, three analog video outputs, low-power operation, and a compact chip-scale package. The three-DAC arrangement allows one encoder to drive multiple analog outputs, reducing component count in systems that require composite and S-Video generation. The 40-LFCSP-WQ package also places the converter close to its digital input source and analog output connectors, which can help shorten sensitive routing paths. The ADV7390/ADV7391/ADV7392/ADV7393 family shares a common encoder architecture and digital timing approach. The manufacturer data sheet states that the digital timing specification section defines the falling-edge HSYNC behavior and the resulting tri-level synchronization timing at the analog output. Matching digital input timing, synchronization, and DAC settling requirements is essential when the encoder is used with an external FPGA, scaler, or video processor. Typical applications include DVD players, game consoles, media players, broadcast and professional video equipment, video capture hardware, and industrial display systems that require conversion from digital video to composite or S-Video. An FPGA-based source can feed parallel pixel data and synchronization signals while the ADV7392 handles the final digital-to-analog conversion stage. When laying out the board, place the encoder close to the analog output connectors, route synchronization and pixel-data traces as controlled-length digital interfaces, and decouple each analog supply rail locally. Confirm input format, pixel clock, synchronization polarity, output standard, and allowed timing margin against the manufacturer data sheet before the layout is released. This page consolidates the verified product identity, package information, family-level capabilities, lifecycle status, related encoder options, and application guidance into a design-focused reference for engineers evaluating the ADV7392WBCPZ.

RFQ پەیوەندی
ADV7400AKSTZ-80 10-Bit Multiformat Video Decoder | Analog Devices
ADV7400AKSTZ-80

ADV7400AKSTZ-80 10-Bit Multiformat Video Decoder | Analog Devices

The Analog Devices ADV7400AKSTZ-80 is a 10-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer with 100 terminals, 0.5 mm terminal pitch, 1.8 V and 3.3 V power supplies, and an operating temperature range of -25°C to +70°C. It is packaged for surface-mount assembly in Analog Devices' 100-terminal STZ package. The device is positioned as a lower-cost alternative to the ADV7402 for designs requiring 8-bit accurate data resolution on smaller displays or in less demanding visual and recording applications. A multiformat video decoder is an interface IC that converts composite, component, or other supported analog video signals into digital pixel and timing data. In the broader semiconductor hierarchy, the ADV7400 belongs to the video decoder family, which is part of interface ICs and ultimately forms one stage of an analog-to-digital display signal chain. Its digitization function is commonly paired with a video encoder when a system must transmit processed images, or with display and image-processing circuitry when it must render captured video locally. The principal feature is 10-bit digital video processing combined with the ADV7402 digital-processing feature set, allowing engineers to balance display fidelity and signal-chain performance. The device accepts 1.8 V and 3.3 V supply rails, allowing it to coexist with modern digital logic operating at either interface level. A 0.5 mm terminal pitch supports a compact, high-pin-count surface-mount footprint, while the 100-terminal arrangement provides the connectivity required for multiformat video input, digital data, clocking, control, and power functions. The -80 ordering suffix identifies this exact speed-grade and package configuration. Variants of the ADV7400 family appear in the 100-terminal STZ form as well as the related BST packaging notation. Designers should verify the complete ordering code, pin descriptions, supported synchronization formats, analog input limits, and digital interface timing against the manufacturer datasheet before releasing a PCB or production build. The decoder is a signal-path component, so routing, grounding, power sequencing, and source-impedance matching can materially affect picture integrity. Typical applications include professional video monitoring, broadcast signal conversion, multimedia presentation equipment, security and surveillance displays, industrial vision interfaces, and legacy SDTV or HDTV digitization. In these systems, the ADV7400AKSTZ-80 can convert incoming analog video into a digital raster suitable for scaling, recording, encoding, or display processing. Its compact package is particularly useful when the video interface must coexist with substantial digital processing in a space-constrained circuit board. A critical design consideration is the separation of analog and digital return currents. Keep analog input traces short, use a continuous ground reference, place decoupling capacitors at the supply pins, and follow the manufacturer’s recommended input and output interface circuits. Avoid long routes through switching-power regions, and match impedance consistently on digital video buses. These practices reduce susceptibility to edge ringing, crosstalk, color artifacts, and synchronization errors. This product page consolidates the exact ordering information, package characteristics, operating limits, comparison points, and application-focused engineering guidance for the ADV7400AKSTZ-80. It also distinguishes the closest documented family alternatives while preserving the strict requirement that a replacement use the same 100-terminal package and be assessed for pin, speed-grade, and interface compatibility.

RFQ پەیوەندی
ADV7400KST-80 Multiformat Video Decoder | Analog Devices
ADV7400KST-80

ADV7400KST-80 Multiformat Video Decoder | Analog Devices

Analog Devices ADV7400KST-80 is a multiformat video decoder IC designed for advanced television signal chains, with the -80 speed-grade suffix identifying this ordering configuration. The device belongs to the ADV7400 multiformat video-decoder family and is supplied in the 80-lead KST surface-mount package. Its primary function is to accept compatible digital video streams, decode them, and provide reconstructed pixel data for subsequent display, conversion, processing, or transmission stages. A video decoder is an interface IC that converts encoded or compressed video data into a digital pixel representation that downstream processing equipment can understand. Within a television or video-processing system, this function sits between a video source and image-processing, display, scaler, or encoder circuitry. Multiformat decoder ICs combine several input standards and signal arrangements into one device, reducing the number of separate interface blocks required in a complex television design. The ADV7400 family is specifically associated with advanced television applications. Analog Devices positions the ADV7402 and ADV7400 devices as complementary multiformat video decoders within broader television signal chains that can also include graphics and HDMI or DVI receivers, video encoders, and video DACs. This system-level context matters because interface selection depends on pixel format, timing, port configuration, output destination, and the surrounding video architecture. The -80 ordering code identifies the ADV7400 variant configured for an 80 MHz operating class, subject to the detailed limits and test conditions listed in the manufacturer datasheet. The KST suffix identifies the 80-lead package used by this ordering variant. Package construction, exposed-pad requirements, soldering guidance, and maximum ratings must be followed directly from the package drawing and land-pattern information in the manufacturer datasheet. Typical ADV7400KST-80 applications include digital television front ends, television set-top equipment, video-conversion subsystems, image-processing chains, and industrial or professional displays that receive compatible multiformat digital video. Its role is especially relevant where the product needs reliable digital video reconstruction before pixels are scaled, encoded, transmitted, or displayed. The principal design consideration is system-level interface validation. Confirm the supported input format, expected pixel-clock range, active-pixel timing, power rails, synchronization requirements, and output destination before finalizing a board layout. Preserve the manufacturer-recommended decoupling and keep high-speed video traces short, properly referenced, and separated from noisy power-conversion stages. This product page combines the confirmed ADV7400KST-80 identity, exact ordering code, package family, and multiformat video-decoder use with practical interface-selection guidance. It also provides same-family drop-in candidates, application relationships, and design notes intended to make television and video-interface design reviews more systematic.

RFQ پەیوەندی
ADV7401BSTZ-110 10-Bit Video Decoder | Analog Devices
ADV7401BSTZ-110

ADV7401BSTZ-110 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7401BSTZ-110 is a 10-bit, single-chip multiformat SDTV/HDTV video decoder and RGB graphics digitizer that converts PAL, NTSC, and SECAM composite or S-video signals into digital ITU-R BT.656 data. The device combines four ADC channels with a 100-lead LQFP package measuring 14 mm by 14 mm, making it suitable for professional video processing, broadcast equipment, security systems, and legacy analog-video capture platforms. A video decoder is an interface IC that converts analog video into a digital pixel stream that can be processed, stored, or transmitted by digital electronics. Within the broader semiconductor hierarchy, the ADV7401 belongs to the video-processing IC family, connects to the interface-IC category, and ultimately supports the wider digital-video ecosystem. Its standardized BT.656 output simplifies connection to frame buffers, video processors, capture controllers, and display or broadcast equipment. The principal characteristics include 10-bit video digitization, four ADC channels, multiformat analog-video decoding, and digital ITU-R BT.656 output. According to the Analog Devices product page, the decoder supports PAL, NTSC, and SECAM inputs supplied through composite or S-video interfaces. The -110 ordering suffix identifies the specific 110 MHz-capable device variant, while the BSTZ package designation corresponds to the 100-lead LQFP configuration. Technically, the ADV7401 combines analog-to-digital conversion with decoding and graphics digitization in one package. Its four ADC channels allow multiple analog-video sources to be captured under appropriate input configurations. The resulting 10-bit pixel data is delivered digitally, avoiding repeated conversion between analog video and digital processing domains. This integration can reduce board area and simplify synchronization when the decoder is placed ahead of an FPGA, ASIC, DSP, or dedicated video processor. Typical uses include SDTV and HDTV decoding inside professional monitors, broadcast test equipment, video walls, surveillance recorders, industrial inspection systems, and legacy multimedia appliances. PAL, NTSC, and SECAM support makes it especially relevant to globally deployed equipment that must accept several regional television formats. The digital output can also feed later-stage color processing, scaling, enhancement, encoding, or frame capture. Designers should use the manufacturer datasheet pin-description table when assigning PCB tracks and should treat the analog input network, synchronization signals, digital output timing, supply rails, and exposed thermal considerations as an integrated signal-integrity problem. Component values, supported synchronization modes, electrical limits, and initialization requirements should be taken directly from the manufacturer documentation for the exact ADV7401BSTZ-110 ordering code. This page combines the manufacturer product description, distributor package identification, application guidance, and engineering-focused design considerations for engineers evaluating the ADV7401BSTZ-110. It also distinguishes the decoder from related Analog Devices video-conversion families and explains when a same-footprint replacement is appropriate without treating functionally similar devices as automatic substitutes.

RFQ پەیوەندی
ADV7401KSTZ-140 - 10-Bit Video Decoder | Analog Devices
ADV7401KSTZ-140

ADV7401KSTZ-140 - 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7401KSTZ-140 is a 10-bit, single-chip multiformat SDTV/HDTV video decoder and RGB graphics digitizer with 100-lead LQFP packaging. It converts PAL, NTSC, and SECAM composite or S-video signals into the digital ITU-R BT.656 format, while the 1.8 V digital and 3.3 V analog supply arrangement supports integration with contemporary video processing logic. A video decoder is an interface IC that converts legacy analog television waveforms into digital pixels suitable for capture, scaling, processing, encoding, or display. Within the broader semiconductor hierarchy, the ADV7401 belongs to video processing ICs, interface ICs, and multimedia signal-processing semiconductors. Its integrated analog front end and digital output reduce the need for separate decoders when equipment must accept multiple regional television standards. The ADV7401 supports 10-bit digitization for PAL, NTSC, and SECAM, with composite and S-video inputs identified in the manufacturer product information. Serial digital output follows the ITU-R BT.656 interface format. The device also incorporates on-screen display and teletext support, as identified for the ADV7401KSTZ-140, along with RGB graphics digitization. These features make it applicable to broadcast equipment, video capture systems, industrial monitoring panels, and legacy-source conversion equipment. The -140 orderable variant uses a 100-lead, 14 mm by 14 mm low-profile flat package and is specified for an industrial temperature range of 0°C to 70°C. The 100-pin interface exposes the analog video inputs, digital processing connections, control signals, synchronization outputs, and supply rails. That extensive mixed-signal pinout requires a carefully partitioned PCB with short analog paths, controlled return currents, and separate routing for digital output and clock signals. Typical designs place the ADV7401 between an analog video connector and an FPGA, DSP, image processor, or digital video encoder. In a PAL/NTSC capture system, the decoder digitizes the incoming composite signal and presents synchronized 10-bit pixels over ITU-R BT.656 for downstream processing. In broadcast or professional monitoring equipment, its multistandard decoding, OSD, and teletext capabilities reduce the number of separate video subsystem blocks while preserving a common digital processing interface. The primary design consideration is mixed-signal implementation. Route composite and S-video inputs away from high-speed digital clocks, use an uninterrupted ground plane, place bypass capacitors at the supply pins, and follow the pin-description table in the manufacturer datasheet when assigning connector and processor connections. Confirm supported resolution, synchronization mode, and output timing against the system video standard before releasing the PCB layout. This product page consolidates the multiformat decoding capability, package details, practical interface guidance, qualified drop-in comparisons, and sourcing information needed to evaluate the ADV7401KSTZ-140 before integrating it into an SDTV, HDTV, broadcast, capture, or industrial video design.

RFQ پەیوەندی
ADV7403BSTZ-110 - 12-Bit 110 MHz Video Decoder | Analog Devices
ADV7403BSTZ-110

ADV7403BSTZ-110 - 12-Bit 110 MHz Video Decoder | Analog Devices

The Analog Devices ADV7403BSTZ-110 is a 12-bit, integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer with a 110 MHz sampling speed, support for PAL, NTSC, and SECAM composite or S-Video inputs, and serial ITU-R BT.656 output. The device is supplied in a 100-lead, 14 mm × 14 mm RoHS-compliant LQFP package and operates over the industrial temperature range of -40°C to +85°C. A video decoder is an interface IC that converts legacy analog video signals into a digital pixel stream for processing, display, capture, or transmission. The ADV7403 belongs to the broader video-processing IC hierarchy and combines four noise-shaped 12-bit ADCs, a 12-channel analog input multiplexer, analog video decoding, and digital output formatting in one package. Its BT.656 output provides a conventional parallel digital-video interface for downstream processors and display controllers. Key capabilities include 12-bit video digitization, four noise-shaped video ADCs, a 12-channel analog input multiplexer, SCART fast-blank support, and multiformat decoding for PAL, NTSC, and SECAM. The -110 speed grade supports operation to 110 MHz, while a separate 140 MHz grade is identified as ADV7403KST-140. These distinctions are important because sampling speed affects supported signal bandwidth and timing margin. The integrated conversion path reduces the number of discrete analog-to-digital and decoding functions required for legacy video ingestion. Composite and S-Video sources can be selected through the analog input multiplexer and converted into digital ITU-R BT.656 data. Digital pixel data may then be routed to an FPGA, processor, scaler, capture controller, or video processor without requiring a separate external video decoder for these supported formats. Typical uses include industrial video inspection, professional broadcast and surveillance equipment, video capture cards, legacy media conversion, test and measurement systems, and embedded video-processing equipment. The device is most appropriate where PAL, NTSC, or SECAM analog sources must become digital video while preserving a defined 12-bit conversion path and standardized serial output. Layout should follow the manufacturer's pin-description table and recommended decoupling arrangement because this 100-pin mixed-signal LQFP contains high-speed digital outputs alongside sensitive analog inputs. Keep analog and digital return paths controlled, place bypass capacitors close to their supply pins, and treat the exposed analog and digital interfaces according to the pin table rather than assuming identical routing requirements. This page combines manufacturer-device facts, lifecycle status, source links, parameter comparisons, and practical replacement guidance. It also distinguishes the 110 MHz grade from the 140 MHz ADV7403KST-140 option and identifies the limitations of using an ADV7401 or ADV7510 as a direct drop-in replacement.

RFQ پەیوەندی
ADV7403KSTZ-140 - 12-Bit 140MHz Video Decoder | Analog Devices
ADV7403KSTZ-140

ADV7403KSTZ-140 - 12-Bit 140MHz Video Decoder | Analog Devices

The Analog Devices ADV7403KSTZ-140 is a 12-bit integrated multiformat SDTV/HDTV video decoder and RGB graphics digitizer with four 140 MHz NSV ADCs, a 12-channel analog input multiplexer, and digital ITU-R BT.656 output. The device supports PAL, NTSC, and SECAM composite or S-video inputs and is packaged in a 100-LQFP, 14 x 14 mm package. A video decoder is an interface IC that converts analog video signals into a digital pixel stream. The ADV7403 combines analog front-end conversion, multiformat decoding, graphics digitization, and digital output in one device. This integration reduces the need for separate ADC, decoder, and routing blocks while providing a defined path from composite or S-video inputs to a digital video processor. Key features include 12-bit processing, four 140 MHz NSV analog-to-digital converters, a 12-channel analog multiplexer, support for composite and S-video sources, PAL/NTSC/SECAM decoding, and digital ITU-R BT.656 output. The four current and voltage clamp control loops help remove DC offsets from analog inputs, while the integrated multiplexer supports multisource connection without an external multiplexer. The KSTZ-140 designation identifies the 140 MHz performance option. The analog front end and digital processing are designed for SDTV and HDTV video conversion, including professional monitoring, broadcast, surveillance, video capture, and embedded display systems. The 100-LQFP package provides a defined footprint for boards requiring numerous analog, digital, power, and ground connections. Typical deployments place the device after an analog video connector and before an FPGA, video scaler, frame grabber, display controller, or digital video processor. Composite and S-video sources can be selected through the integrated multiplexer, and the resulting digital output can be routed according to the system's decoding and processing requirements. A key design consideration is signal integrity. The analog input path should use controlled impedance routing, short connections, appropriate grounding, and connector placement that minimizes noise pickup. Power, clock, serial digital output, and analog input nets should follow the manufacturer's recommended decoupling and layout guidance, particularly when the input bandwidth approaches the 140 MHz converter capability. This product page combines the manufacturer description, distributor listings, package information, lifecycle indication, and documented family references. It also provides application guidance, comparison points, and design notes to help engineers evaluate the ADV7403KSTZ-140 when selecting a dedicated multiformat video decoder for a new or existing video-processing design.

RFQ پەیوەندی
ADV7510BSTZ-P - 225MHz HDMI 1.3 Transmitter | Analog Devices
ADV7510BSTZ-P

ADV7510BSTZ-P - 225MHz HDMI 1.3 Transmitter | Analog Devices

Analog Devices ADV7510BSTZ-P is a 225 MHz High-Definition Multimedia Interface (HDMI) transmitter with HDMI 1.3 support and Consumer Electronics Control (CEC), packaged in a 100-lead LQFP measuring 14 x 14 mm. The transmitter supports all HDTV formats, including 1080p video with 12-bit Deep Color, and includes an HDMI and DVI v1.0-compatible transmitter interface. An HDMI transmitter is a semiconductor that converts digital video and audio data into an HDMI-compatible output stream. It sits between a graphics processor, video processor, set-top-box chipset, or other source device and a television, projector, game console, or audio-video receiver. In the broader hierarchy, the ADV7510BSTZ-P is an interface IC, a video interface transmitter, and a power-management-independent signal-processing semiconductor designed for high-speed digital audiovisual links. The ADV7510BSTZ-P provides a 225 MHz operating interface, HDMI 1.3 functionality, and CEC support. Its 12-bit Deep Color capability enables richer color representation than 8-bit video systems, while the DVI v1.0-compatible path broadens compatibility with digital video equipment. The 100-LQFP package provides a high pin count for separate digital, analog, clock, power, ground, and control connections. Analog Devices positions the ADV7510 for home-entertainment equipment, including DVD players and recorders, digital set-top boxes, audio-video receivers, gaming consoles, and PCs. These applications benefit from a transmitter that can carry HDTV-resolution video, including 1080p at 12-bit color depth, through a widely deployed digital audiovisual interface. The integrated CEC function supports control communication with compatible HDMI equipment over the same connection. A practical design decision is whether the source system already has a native HDMI output. If it exposes parallel, LVDS, or other video formats, a separate video processor and digital-to-analog or digital-to-digital conversion stage may still be required. If the source provides a compatible digital video stream, the ADV7510BSTZ-P can simplify the final HDMI transmission stage while retaining 225 MHz signaling capability. Pay attention to the complete pin-description table, electrical limits, reference clock requirements, and recommended external-component values in the Analog Devices ADV7510 datasheet. PCB implementation must preserve high-speed routing clarity, provide appropriate return paths, and observe the package's exposed thermal and electrical requirements. The ADV7510BSTZ-P is a lead-free 100-LQFP device with a stated MSL of 3 and matte-tin finish. This page organizes the verified ADV7510BSTZ-P interface details, package information, practical applications, and design guidance into one engineering reference. It also distinguishes family alternatives from a confirmed drop-in replacement, helping PCB designers determine whether compatibility is established or whether a complete signal-path review is required before substitution.

RFQ پەیوەندی
ADV7604BBCZ-5P - 12-Bit Multiformat Video Decoder | Analog Devices
ADV7604BBCZ-5P

ADV7604BBCZ-5P - 12-Bit Multiformat Video Decoder | Analog Devices

Analog Devices ADV7604BBCZ-5P is a 12-bit, 170 MHz multiformat video decoder and graphics digitizer with an integrated 4:1 multiplexed HDMI 1.3a receiver, supplied in a 260-CSPBGA package measuring 15 mm by 15 mm. It combines three analog video ADCs, digital video processing, analog video output, and HDMI receiver functions in one high-performance video interface IC. A video decoder is an interface IC that converts incoming composite, component, or digital video signals into a digital representation suitable for an FPGA, SoC, display controller, or image-processing pipeline. The ADV7604 belongs to the broader video interface IC and graphics digitizer hierarchy, where it bridges multiple analog and digital video standards while preserving 12-bit quantization, deep color, and high pixel-clock capability. Its integration reduces the number of separate ADC, scaler, and interface devices required in professional video equipment. The device supports three 12-bit ADCs, a 170 MHz sampling capability, and HDMI 1.3a reception through a 4:1 multiplexer. According to the Analog Devices ADV7604 product page, the main component processor handles decoded video signals, while the integrated HDMI receiver broadens compatibility with digital audiovisual sources. I2C control provides a serial programming path for configuring the device, and IEC 90658 appears in the distributor classification for the target package. Technical implementation requires careful treatment of analog and digital power, clocking, grounding, and high-speed signal routing. The 260-CSPBGA package is a fine-pitch surface-mount device requiring a multilayer PCB, controlled escape routing, and careful via placement beneath the device. Because the part supports both analog and digital video paths, synchronization between the analog ADCs, HDMI receiver, processor, and external digital interface is central to maintaining signal integrity. Typical uses include professional broadcast video conversion, video-wall controllers, digital signage, industrial inspection systems, security cameras, multimedia processors, and FPGA-based image acquisition. The integrated multiformat receiver is useful when equipment must accept legacy analog video while also supporting digital HDMI sources through a common processing pipeline. The main PCB tradeoff is complexity: integrating three ADCs and an HDMI receiver reduces external component count, but the 260-ball BGA demands fine-pitch manufacturing and careful thermal planning. Follow the manufacturer pin-description table and recommended decoupling network when assigning PCB tracks. Review the complete power-up sequence and clock requirements before enabling all receiver and processing paths simultaneously. This page organizes the verified ADV7604BBCZ-5P package, interface, and configuration information alongside practical implementation guidance, sourcing questions, and a conservative drop-in assessment. It is intended to help engineers identify the correct part, plan the board, and determine whether an alternate ordering code or genuinely pin-compatible device is appropriate.

RFQ پەیوەندی
ADV7610BBCZ-P-RL - 165 MHz HDMI Receiver | Analog Devices
ADV7610BBCZ-P-RL

ADV7610BBCZ-P-RL - 165 MHz HDMI Receiver | Analog Devices

Analog Devices ADV7610BBCZ-P-RL is a low-power, single-input HDMI-capable receiver with a 165 MHz maximum clock, support for video formats up to UXGA at 60 Hz and 8-bit color, and a 76-CSPBGA 6 mm × 6 mm package. The professional no-HDCP variant also integrates a CEC controller with capability discovery and control support and uses an I2C control interface. An HDMI receiver is an interface IC that recovers digital audio and video from an HDMI source and converts the recovered video into a parallel digital interface suitable for display or video-processing hardware. In the product hierarchy, the ADV7610BBCZ-P-RL belongs to the HDMI receiver class, interface IC category, and broader semiconductor ecosystem. Its single-input architecture simplifies source selection while providing the clocking and signal-conditioning functions required between a connector and the downstream video system. Principal features include a 165 MHz operating clock, UXGA 60 Hz video support at 8 bits per color, integrated HDMI reception, I2C configuration, and CEC capability. The operating temperature range of −40°C to +85°C supports industrial equipment as well as consumer and professional AV products. The low-power architecture is particularly useful when the receiver operates continuously inside a display, projector, set-top box, or video-processing enclosure. The receiver separates the physical-layer and protocol handling needed for an HDMI link from downstream pixel processing. Its 76-CSPBGA package minimizes board area, but its fine pitch and large ball count require careful PCB layout, controlled impedance routing, and assembly processes capable of handling the package geometry. The I2C register interface allows firmware to configure detection, equalization, clocking, input format, and output behavior according to the connected source. Typical applications include HDMI input for professional video equipment, industrial display controllers, projectors, video walls, conferencing endpoints, and multimedia receivers. Its UXGA 60 Hz capability is useful when the downstream display pipeline must preserve 1920 × 1200 video at a 60 Hz refresh rate. The professional no-HDCP configuration should be selected only when protected content is not required. When laying out the board, treat the HDMI input, reference clock, power rails, and ground-return structure as a coordinated high-speed system. Follow the pin-description table and recommended-layout guidance in the manufacturer datasheet for every ball assignment. Avoid improvising an HDMI front end from generic routing conventions, because connector launch geometry, trace impedance, return paths, and decoupling placement materially affect link margin. This product page consolidates the manufacturer capabilities, exact package identity, interface characteristics, drop-in variants, application fit, and practical implementation considerations into an engineering-focused selection reference. Use the Request a Quote form for current commercial availability, lead time, and order handling.

RFQ پەیوەندی
ADV7623BSTZ-P - 4-Input HDMI Transceiver | Analog Devices
ADV7623BSTZ-P

ADV7623BSTZ-P - 4-Input HDMI Transceiver | Analog Devices

Analog Devices ADV7623BSTZ-P is a 4-input, 1-output HDMI transceiver with integrated digital audio inputs and outputs, HDMI 1.4a support, and a 5 V supply requirement. It is packaged in a 144-lead LQFP measuring 20 mm by 20 mm and combines four HDMI receivers with one HDMI transmitter on a single device. The -P ordering code identifies the lead-free package configuration. An HDMI transceiver is an interface semiconductor that converts digital video and audio streams between HDMI connectors and an internal digital bus. The ADV7623BSTZ-P sits within the interface IC hierarchy and supports source switching, sink processing, audio extraction, audio insertion, and audio return channel functions. This consolidation can reduce the number of separate interface devices required in a switching or repeater design. Key capabilities include four multiplexed HDMI inputs, one HDMI output, an audio output port, a dedicated audio input port, and an audio return channel receiver. The device supports HDMI 1.4a, 3D television signaling, content type bits, and advanced high bit rate audio formats. Its control interface uses a 2-wire, I2C-compatible serial bus for configuration by an external master controller. The ADV7623BSTZ-P also provides HDCP repeater functions supported by Analog Devices software libraries and drivers. This feature set is relevant to systems that route protected high-definition multimedia content between source and sink equipment. The integrated audio paths allow audio to be extracted from or inserted into an HDMI stream without requiring a separate format conversion device in many system architectures. Typical uses include professional video routers, presentation systems, digital audio/video matrices, home-theater equipment, and broadcast infrastructure. The four-input architecture is especially useful when a system must select among several HDMI sources while maintaining one transmitter output. The dedicated audio paths can support extraction of digital audio for a separate sound system or insertion of audio into an outgoing video stream. When laying out a board, follow the Analog Devices ADV7623 datasheet pin description, exposed-pad requirements, reference circuit, and recommended decoupling values exactly. The 5 V supply rail requires local high-frequency bypass capacitance, while HDMI routing must be controlled to minimize signal degradation. Firmware and HDCP repeater support should be evaluated as part of the complete system design rather than treated as an automatic capability of the silicon alone. This product data combines the manufacturer feature description, package and ordering information, interface capabilities, sourcing guidance, and design-focused application analysis. It also distinguishes true drop-in replacements from related HDMI devices with different input counts, package details, or feature sets, helping engineers make a technically defensible selection without assuming that similar functionality guarantees PCB compatibility.

RFQ پەیوەندی
ADV7623BSTZ-P-RL - 4-Input HDMI Transceiver | Analog Devices
ADV7623BSTZ-P-RL

ADV7623BSTZ-P-RL - 4-Input HDMI Transceiver | Analog Devices

Analog Devices ADV7623BSTZ-P-RL is a four-input, one-output High-Definition Multimedia Interface transceiver integrating HDMI receiver and transmitter functions with digital audio inputs and outputs in a 144-LQFP 20 x 20 mm package. It is designed for professional audiovisual equipment that needs flexible source selection, digital audio routing, and HDMI signal handling in one device. An HDMI transceiver is an interface IC that combines digital video and audio reception with signal transmission. In the broader electronics hierarchy, the ADV7623 belongs to the HDMI interface and multimedia interface family, connecting source equipment, displays, projectors, audio processors, and control electronics. Its four receiver inputs allow several HDMI sources to be selected for processing, while the single transmitter output provides a controlled HDMI path to the next device in the system. The main functional characteristics of the ADV7623BSTZ-P-RL are its four HDMI inputs, one HDMI output, integrated digital audio input and output paths, and support for HDCP repeater functions through Analog Devices software libraries and drivers. The manufacturer describes the device as a high-performance HDMI transceiver with fast port-switching technology. These features make it appropriate for professional AV switchers, digital audio/video processors, display-management equipment, and repeater designs. The integrated architecture reduces the need for separate receiver, transmitter, and audio-conversion blocks when an equipment designer must preserve HDMI timing, embedded audio, control data, and protected-content handling. Digital audio I/Os allow audio to be extracted or inserted within the processing path rather than requiring a separate external audio interface. HDCP repeater support provides a defined implementation path for products that must distribute protected audiovisual content. Typical applications include professional video switchers, multimedia presentation systems, digital audio mixers, conference-room endpoints, AV-over-IP processing equipment, projector input interfaces, and display-wall controllers. The four-input structure is particularly useful when a system must accept multiple source resolutions or media formats but only present one selected output. Systems requiring multiple independent output zones need additional transceiver or distribution circuitry rather than a single ADV7623 output. PCB implementation requires a 144-LQFP footprint, careful routing of high-speed HDMI differential pairs, solid return-plane continuity, and decoupling close to the device power pins. The large 20 x 20 mm package provides many signal and power connections, but its lead pitch and pin count make fine-pitch assembly and careful fanout important. Follow the manufacturer datasheet for the exact pin assignments, reference layout, and component values required for high-speed signal integrity. This product page combines the verified device identity, interface architecture, package information, drop-in assessment, comparison parameters, and practical PCB guidance in one engineering-focused reference. The result helps designers distinguish true pin-compatible choices from HDMI devices that are only functionally similar, while keeping procurement decisions tied to the exact ADV7623BSTZ-P-RL ordering code.

RFQ پەیوەندی
ADV7682WBSWZ-RL - Dual HDMI/APIX2 Receiver | Analog Devices
ADV7682WBSWZ-RL

ADV7682WBSWZ-RL - Dual HDMI/APIX2 Receiver | Analog Devices

Analog Devices ADV7682WBSWZ-RL is a dual-input HDMI and single-input ITU-R BT.656 receiver with an APIX2 transmitter, designed for professional audiovisual, automotive, and industrial video systems. The device combines two HDMI receiver inputs, one BT.656 input path, and APIX2 output in a 100-pin LQFP exposed-pad package measuring 14 mm by 14 mm. An HDMI receiver is an interface IC that accepts digital audio and video signals from sources such as computers, cameras, and media processors. The ADV7682 combines that receiver function with an APIX2 transmitter, allowing received video to be redistributed through APIX-compatible links. APIX2 compatibility extends interoperability with Inova Semiconductors APIX and APIX2 receiver technology, making the device relevant to professional broadcast, surveillance, and vehicle infotainment equipment. The ADV7682 provides two HDMI inputs and a single ITU-R BT.656 input. This combination supports systems that need to select between computer or camera sources and digital-video equipment operating with parallel BT.656 interfaces. Its APIX2 transmitter provides a common output path for downstream transmission, while the integrated receiver architecture can simplify chassis design compared with separate receiver and transmitter assemblies. The automotive ordering option identified for ADV7682WBSWZ-RL supports AEC-Q100-qualified applications. Its exposed-pad LQFP construction provides a large thermal and electrical connection to the PCB, which is important for high-speed interface devices whose switching activity and power dissipation must be controlled. Correct high-speed layout, solid reference-plane continuity, and careful supply decoupling remain central to reliable operation. Typical applications include automotive infotainment displays, professional video monitors, camera-viewing systems, video walls, broadcast production equipment, and industrial control consoles. In an automotive head unit, the receiver can accept HDMI content from a navigation or media source and provide an APIX2 link to a display or additional vehicle controller. In broadcast infrastructure, APIX2 compatibility supports standardized point-to-point and multicast audio/video networking. Designers should follow the Analog Devices ADV7682 manufacturer datasheet for the complete pinout, input electrical limits, supported video formats, reference-clock requirements, and exposed-pad land pattern. The 14 mm by 14 mm LQFP-EP footprint requires careful differential and high-speed routing, short return paths, and uninterrupted ground planes beneath and around the device. This product record combines the manufacturer’s interface description with distributor package information and application-specific engineering guidance. It also distinguishes the device from related ordering codes and unavailable pin-level parameters, helping engineers confirm package compatibility, thermal strategy, and signal-integrity requirements before committing a new PCB layout.

RFQ پەیوەندی
ADV7800BSTZ-150 10-Bit Video Decoder | Analog Devices
ADV7800BSTZ-150

ADV7800BSTZ-150 10-Bit Video Decoder | Analog Devices

The Analog Devices ADV7800BSTZ-150 is a 10-bit, single-chip multiformat 3D comb filter, video decoder, and graphics digitizer in a 176-lead LQFP package measuring 24 x 24 mm. It converts PAL, NTSC, and SECAM composite or S-Video inputs into digital ITU-R BT.656 video, combining analog input conditioning, decoding, filtering, and digitization in one device. The -150 ordering code identifies the specified manufacturer configuration, while the supported video standards and digital output are the primary functional characteristics. A video decoder is an interface IC that converts analog television signals into digital pixel data suitable for display, capture, conversion, or embedded processing. Within the signal-chain hierarchy, the ADV7800BSTZ-150 acts as an analog-to-video interface between composite or S-Video sources and digital video-processing logic. Its integrated 3D comb filter and graphics digitizer reduce the number of separate signal-conditioning blocks required in legacy video equipment. The principal feature set includes 10-bit video processing, support for PAL, NTSC, and SECAM standards, conversion from composite or S-Video inputs, digital ITU-R BT.656 output, and integrated 3D comb filtering. These capabilities make the device appropriate for professional video conversion, broadcast-related equipment, video test systems, industrial imaging, and legacy audiovisual equipment requiring standardized digital video output. The wide 176-lead package supports extensive analog, digital, clock, power, and configuration connectivity. The component integrates several signal-processing stages in one package. Composite input decoding and S-Video handling precede digital pixel generation, while the 3D comb filter separates luminance and chrominance information and reduces cross-color artifacts. The graphics digitizer produces digital video data compliant with ITU-R BT.656, allowing the output to connect directly to digital video processors, scalers, capture systems, or display controllers when their electrical interfaces are compatible. Typical applications include PAL, NTSC, and SECAM video conversion; SDTV and HDTV-related interface equipment; broadcast monitoring; audiovisual test and measurement; digital video capture; and industrial systems that still accept legacy analog television formats. The manufacturer datasheet should be consulted for clocking, register programming, synchronization standards, supply requirements, analog input configuration, and exact digital-interface details before finalizing a board design. PCB implementation requires careful attention to analog and digital signal separation, clock routing, grounding, and decoupling around this large mixed-signal IC. Use the manufacturer’s recommended pin assignments and reference layouts, preserve continuous return paths beneath the package where applicable, and validate the complete composite or S-Video front end for noise, impedance matching, and connector isolation. This page provides a focused product view that combines the identified video functions, package information, purchasing workflow, practical design guidance, and a documented comparison with closely related ADV7800 and ADV7802 devices. It is intended to help engineers determine functional suitability before completing pin-level and timing validation with the official device documentation.

RFQ پەیوەندی
AK2345 - CTCSS Encoder/Decoder 24-VSOP | AKM Semiconductor
AK2345

AK2345 - CTCSS Encoder/Decoder 24-VSOP | AKM Semiconductor

The AKM Semiconductor AK2345 is a CTCSS (Continuous Tone Controlled Squelch System) encoder/decoder IC with integrated voice signal processing, housed in a 24-pin VSOP (VSOP-24) plastic package. It supports up to 50 programmable sub-audible tone frequencies in the 67 Hz to 254.1 Hz range, compliant with the TIA/EIA-603 land-mobile-radio standard, and operates from a digital supply of 1.8 V to 5.5 V with CMOS process technology. What is a CTCSS encoder/decoder? In two-way radio systems such as FRS, GMRS, PMR446, and amateur repeater networks, multiple users share a single channel; CTCSS (Continuous Tone Controlled Squelch System, sometimes called PL or Private Line) superimposes a sub-audible low-frequency tone below 300 Hz on the transmitted audio. Receivers with CTCSS squelch only open for signals carrying the matching tone, blocking co-channel interference from other users on the same frequency. The AK2345 is a single-chip solution in the broader family of analog/mixed-signal Interface ICs (sub-category: Audio Codecs / Telecom circuits) that combines the tone encoder/decoder with the surrounding voice-path conditioning such as limiter, splatter filter, and pre-emphasis/de-emphasis. Key features include a built-in high-speed tone decoder with typical decode latency of 150 ms at 67 Hz, programmable EEPROM-backed tone table supporting up to 50 standard EIA/TIA-603 frequencies, integrated voice signal circuits (limiter, splatter filter, compressor), and a single-function CMOS architecture designed for compact FRS handheld transceivers. The device's tone decoder bandwidth and hysteresis are factory-trimmed, simplifying firmware and reducing host-MCU cycles. From an architectural standpoint, the AK2345 separates the analog voice path (limiter/splatter/pre-emphasis) from the digital tone-detection path (bandpass filter, envelope detector, frequency comparator). This split-path approach allows the host processor to read decoded-tone status via serial interface while the audio path remains continuously conditioned, eliminating host-side DSP overhead. Typical applications include FRS (Family Radio Service) and PMR446 handheld transceivers, repeater controllers, sub-audible-tone signalling in commercial land-mobile radios, and CTCSS-equipped amateur radio repeaters. Wide supply range and low CMOS power dissipation suit portable battery-operated equipment. Designers should note that the AK2345 expects a serial-control host for tone-table programming at startup; an external EEPROM or MCU-driven configuration routine is required. Bypass the analog supply pin with a 0.1 uF ceramic capacitor placed within 5 mm of the package pin. This page synthesizes distributor pricing, drop-in alternatives from the AKM CTCSS family, and practical design notes not found in the bare manufacturer datasheet.

RFQ پەیوەندی