بەرهەمەکان (5,100+)

AK4101AVQ - Quad 192kHz 24-Bit Audio DIT | AKM
AK4101AVQ

AK4101AVQ - Quad 192kHz 24-Bit Audio DIT | AKM

Asahi Kasei Microdevices/AKM AK4101AVQ is a four-output digital audio transmitter (DIT) for professional audio and digital audio equipment. It supports operation up to a 192 kHz sample rate with 24-bit audio data and provides four transmitter outputs. The device supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface standards, placing it in the digital audio interface hierarchy of audio codec, interface IC, and semiconductor. A digital audio transmitter converts an internal digital audio stream into standards-compliant digital audio outputs for transmission or routing. The AK4101A family provides four output channels, allowing one transmitter IC to serve multichannel systems without requiring four separate single-output devices. Support for AES3 and IEC60958 is valuable in professional studio equipment, broadcast consoles, digital mixers, and format converters that exchange 24-bit digital audio over balanced digital connections. The AK4101AVQ supports data rates corresponding to sample rates up to 192 kHz and 24-bit operation. Its four-output architecture consolidates multiple digital audio paths into one 44-LQFP package, potentially reducing board area and simplifying system-level routing compared with four discrete transmitter packages. The 44-pin LQFP uses a 0.8 mm pitch and is specified for temperatures from -40 °C to +85 °C, supporting industrial as well as commercial equipment. The transmitter implements digital interface standards rather than analog-to-digital or digital-to-analog conversion. Consequently, its principal design considerations are input and output data timing, supported channel formats, clock and mode configuration, signal integrity across digital audio connections, and correct mapping of audio frames across the four outputs. These considerations are distinct from analog audio mixer and DAC designs, where converter resolution and analog signal integrity dominate device selection. Typical applications include professional digital mixers, multichannel audio routing equipment, broadcast consoles, digital recording interfaces, sample-rate converters, and studio monitor systems. Four outputs allow several routed channels to share one transmitter package, provided that all attached receivers support the selected format and that the system channel map is configured consistently. For PCB implementation, follow the manufacturer pin-description and application-circuit tables when assigning data, clock, control, and power pins. Preserve the recommended interface topology, provide adequate decoupling at the supply pins, and route high-speed digital audio signals with continuous reference planes. Confirm the selected output standard, master-clock relationship, channel mapping, and sample rate against the receiver connected to each output before releasing the production design. This page consolidates the documented AK4101AVQ capabilities, standards support, package information, application context, and sourcing guidance into an engineering-focused product record. It also distinguishes verified device functions from parameters that require confirmation from the complete manufacturer datasheet or an application-specific design review.

RFQ پەیوەندی
AK4104ET - 192kHz 24-Bit 3.3V DIT | Asahi Kasei
AK4104ET

AK4104ET - 192kHz 24-Bit 3.3V DIT | Asahi Kasei

Asahi Kasei Microsystems AK4104ET is a one-channel digital audio interface transmitter operating at up to 192kHz with 24-bit audio data and a 3.3V supply, packaged in a 16-pin TSSOP. It supports AES3, IEC60958, S/PDIF, and EIAJ CP1201 interface standards. A digital audio interface transmitter, or DIT, is an interface IC that accepts digital audio data and converts it into a standardized serial digital-audio stream. In the hierarchy, a DIT is a digital audio transmitter within the broader class of interface ICs and audio codecs. It is commonly used where a converter, processor, or digital audio source must deliver audio through a standardized digital connection. The AK4104 supports sample-rate operation to 192kHz and 24-bit audio resolution. Its audio serial port supports four formats, allowing the host interface to select an appropriate data arrangement. The verified distributor listing identifies the device as a one-channel digital audio transmitter in a 16-TSSOP package, while the manufacturer datasheet identifies AES3, IEC60958, S/PDIF, and EIAJ CP1201 compatibility. The 3.3V operating supply is suitable for low-voltage digital audio equipment where the transmitter must operate from a 3.3V rail. Digital audio standards commonly used with this class of device include S/PDIF for consumer equipment and professional digital audio links. Exact input and output logic levels, timing limits, and electrical characteristics should be confirmed in the manufacturer datasheet before final PCB sign-off. Typical applications include consumer electronics, professional audio equipment, digital mixers, audio conversion systems, home-theater products, and digital audio source or receiver equipment. The AK4104ET is also relevant when an existing design needs a dedicated transmitter rather than a general-purpose codec. A key design consideration is interface timing and grounding. The host must provide correctly formatted audio data, clocking, and control signals, while the digital output should be routed with controlled impedance and a properly terminated transmission line when required by the selected standard. Verify the exact pinout and recommended external components against the manufacturer datasheet. This page combines verified manufacturer and distributor information, standards context, pricing availability, and design guidance. It also clearly separates confirmed specifications from parameters that require additional datasheet data rather than presenting unsupported assumptions.

RFQ پەیوەندی
AK4112BVF 4-Channel AES/EBU Audio Receiver | AKM
AK4112BVF

AK4112BVF 4-Channel AES/EBU Audio Receiver | AKM

The Asahi Kasei Microdevices AK4112BVF is a 4-channel audio receiver designed for digital audio reception in professional and consumer electronics. The device operates from a 2.7 V to 3.6 V supply, supports sampling frequencies from 22 kHz to 108 kHz, and is housed in a 28-pin VSOP surface-mount package. Its primary function is the reception and decoding of digital audio data carried by the AES/EBU interface used by CD, DVD, broadcast, and professional audio equipment. An AES/EBU receiver is an interface IC that accepts serial digital audio data, extracts clock and framing information, and converts the encoded transmission into a form that can be processed by a decoder, DAC, or audio signal-chain device. In the product hierarchy, the AK4112BVF belongs to the audio special-purpose IC class, which sits below audio interface ICs and above general-purpose digital audio converters. The AK4112BVF provides a 4-channel digital audio receiver in a single device, reducing the component count in systems that previously required separate receivers for multiple channels. Its 2.7 V to 3.6 V operating range supports low-voltage digital audio systems, while the 22 kHz to 108 kHz sampling-rate range covers standard CD, DVD, and high-resolution multichannel audio streams. The 28-VSOP package provides a compact surface-mount footprint for equipment with limited board area. The receiver is suited to digital audio systems operating at 48 kHz, 96 kHz, and 108 kHz sampling rates, where multiple channels must be recovered from a single digital audio link. Its interface role also makes it applicable to digital audio monitoring, home-theater front ends, broadcast equipment, and professional sound systems. System clocking and signal-integrity implementation remain the responsibility of the host circuit. Careful layout is essential because the AES/EBU interface carries high-frequency clock and data signals. Route the serial data and clock lines away from analog outputs, switching-regulator inductors, and other noisy circuits. Follow the manufacturer datasheet for input termination, decoupling, grounding, and exposed-pad or thermal-pad recommendations applicable to the 28-pin package. This page combines the AK4112BVF interface specifications, verified distributor listings, drop-in family options, application guidance, and practical layout considerations. It is intended to help engineers identify the correct package variant, plan the receiving stage, and evaluate replacement options without relying on a generic distributor description.

RFQ پەیوەندی
AK4112BVM - 24-Bit 4-Channel Audio Receiver | AKM
AK4112BVM

AK4112BVM - 24-Bit 4-Channel Audio Receiver | AKM

The Asahi Kasei Microdevices AK4112BVM is a four-channel digital audio receiver built around the AKM AK4112B architecture and packaged in a 28-pin SSOP. It is designed to receive digital audio streams and provide the decoding and digital-interface functions required by multi-channel audio systems. The manufacturer datasheet identifies the device as a 24-bit DIR with operation up to 96 kHz, making it applicable to consumer electronics, broadcast equipment, and digital audio products that process standard high-resolution PCM streams. A digital audio receiver, abbreviated DIR, converts a serial digital audio stream into the internal PCM representation used by audio processing, storage, and playback systems. Within the broader semiconductor hierarchy, the AK4112BVM belongs to the audio interface IC category, with the DIR function providing a bridge between external digital-audio transports and downstream digital signal processing. Its four-channel architecture allows multiple synchronized audio channels to be handled by one receiver rather than through separate single-channel devices. The AK4112BVM supports 24-bit audio processing and sampling frequencies up to 96 kHz. These figures define the principal signal-fidelity and bandwidth requirements of the receiver. The four-channel capability is particularly useful in surround-sound and multi-zone audio equipment, where several channels must share a common device. As a dedicated audio interface IC, the part can simplify clocking and channel management compared with implementing equivalent receiver functions in programmable logic or a general-purpose processor. The AK4112BVM integrates digital audio reception with the AK4112B function set in a compact 28-SSOP package. The package gives an equipment designer a traditional surface-mount implementation with a 28-pin lead arrangement. Because digital audio receivers depend on stable clocking and correctly matched input timing, power-supply sequencing, grounding, and signal routing remain as important as the nominal sample-rate capability. The receiver should be placed according to the manufacturer's pin-description and application-circuit guidance rather than treated as a generic logic IC. Typical applications include digital audio equipment, home-theater and surround-sound processors, broadcast and professional audio equipment, recording-system interfaces, and other products receiving multiple channels of PCM digital audio. At 96 kHz and 24-bit resolution, the device addresses high-resolution audio use cases while retaining the relatively compact package and integrated four-channel receiver architecture. The exact clock requirements, supported digital-audio formats, and signal-level details should be confirmed in the manufacturer datasheet before finalizing a system design. A key design consideration is the relationship between the digital-audio source, the receiver clock, and downstream logic. Route the digital input with controlled impedance, keep return paths continuous, and place required bypass and interface components close to their associated pins. Where the receiver operates near the limits of its supported sampling rate or clock ratio, verify timing margins and jitter tolerance in system-level testing rather than relying only on nominal resolution and frequency figures. This page combines the verified AK4112BVM package and receiver information with practical application guidance, pinout and datasheet access guidance, design considerations, and qualified replacement analysis. It is intended to help engineers identify whether the AK4112BVM fits a four-channel, 24-bit digital-audio design before requesting a quotation or committing the part to a new PCB layout.

RFQ پەیوەندی
AK4113VF - 24-Bit 216kHz DIR Audio Receiver | AKM
AK4113VF

AK4113VF - 24-Bit 216kHz DIR Audio Receiver | AKM

Asahi Kasei Microsystems AK4113VF is a 24-bit stereo digital audio receiver with a 6:1 input selector and support for sampling rates up to 216kHz. It receives digital audio streams, decodes channel-status information, and provides an audio interface for downstream signal processing. The device is identified as a 192kHz 24-bit DIR with 6:1 selector in the retrieved product documentation. A digital audio interface receiver, or DIR, converts a serial digital-audio stream into a form suitable for the next stage of an audio system. In the hierarchy of audio semiconductors, a DIR is a digital-audio input interface, while a DAC is its complementary digital-to-analog converter. The AK4113VF is therefore positioned between an upstream digital source and downstream audio processing, conversion, or monitoring circuitry. The verified information identifies the AK4113VF as a 24-bit stereo receiver supporting rates up to 216kHz and providing a 6:1 selector. The retrieved technical description also states that the channel-status decoder supports consumer and professional modes and that the device automatically detects non-PCM bit streams. These features make it relevant to professional audio equipment, broadcast infrastructure, studio converters, and digital audio routing systems. The AK4113VF is not a power semiconductor, so a safe-operating-area chart is not applicable. Its package and electrical details must be confirmed against the manufacturer datasheet for the exact ordering variant. The retrieved datasheet listing identifies the package as a 30-pin VSOP with 0.65mm pitch. The available product results also reference an evaluation board and associated control, clock, and serial-interface signals. A typical signal chain places the AK4113VF after a digital-audio source and before a DAC, audio codec, DSP, or monitoring interface. The 6:1 selector can simplify front ends that must accept multiple digital sources, while the 24-bit representation preserves high-resolution audio data when the downstream system supports the corresponding word length. Digital input timing, grounding, and format compatibility remain the principal implementation considerations. This product page combines the verified AK4113VF datasheet identity, distributor listings, package information, and cross-reference search results. It also records unavailable parameters explicitly rather than estimating them, helping engineers compare the receiver against candidate replacements and evaluate whether a new PCB design or a qualified substitute is required.

RFQ پەیوەندی
AK4114VQ - 192kHz 24-Bit Digital Audio Interface | AKM
AK4114VQ

AK4114VQ - 192kHz 24-Bit Digital Audio Interface | AKM

The Asahi Kasei Microdevices AK4114VQ is a high-feature digital audio interface transceiver supporting 192 kHz sampling and 24-bit audio data in a 48-LQFP package. It decodes digital audio channel status in both consumer and professional modes and automatically detects non-PCM bitstreams. The device also identifies the recovered sampling frequency and reports it through dedicated FS3-0 output bits. A digital audio interface transceiver converts between serial digital audio and internal data formats while decoding the metadata carried within the audio stream. In the digital-audio hierarchy, the AK4114 sits between a source such as a DVD player, game console, broadcast receiver, or professional audio interface and a subsequent audio codec or signal-chain stage. Its interface handling is especially useful in home-theater and surround-sound equipment, where consumer-format AC-3 streams and professional digital-audio metadata must be recognized reliably. The AK4114 supports operation up to 192 kHz with 24-bit resolution. According to the manufacturer datasheet, its channel-status decoder handles both consumer and professional modes, while automatic non-PCM detection identifies streams that require handling outside ordinary PCM audio decoding. Sampling-frequency detection can use either clock comparison against the crystal oscillator or sampling-frequency information contained in channel status; these methods are selected through the XTL1,0 control bits. For AC-3 system designs, the manufacturer describes combining the AK4114 with the AK4527B or AK4529 multichannel audio codec. The AK4114 provides interface recognition and channel-status decoding, while the companion codec performs the associated multichannel audio conversion. Dedicated configuration pins and a serial microprocessor interface provide additional control options for integrating the transceiver into system-specific control schemes. Typical uses include DVD and Blu-ray disc player audio interfaces, surround-sound home-theater receivers, game consoles, broadcast and professional audio equipment, and AC-3 decoder subsystems. Design the PCB with short, controlled clock and data routes, provide a stable crystal reference, and use the pin-function table in the manufacturer datasheet when assigning tracks. Confirm that the selected companion codec supports the required sample rate, channel format, and metadata mode before finalizing the system architecture.

RFQ پەیوەندی
AK4115VQ - 24-Bit Digital Audio Interface | AKM
AK4115VQ

AK4115VQ - 24-Bit Digital Audio Interface | AKM

The Asahi Kasei Microdevices AK4115VQ is a 24-bit digital audio interface transceiver (DIX) supporting Dolby Digital decoding, with operation from 2.7 V to 3.6 V for both analog and digital supplies. The device handles 192 kHz audio in a 64-LQFP surface-mount package measuring 10 mm by 10 mm. Its dual interface role combines a digital audio decoder with a digital audio interface transmitter for professional audio, consumer audio, broadcast, and recording equipment. A digital audio interface transceiver is an interface IC that converts digital audio data into an analog audio output and can also pass digital audio through a secondary interface. In the product hierarchy, the AK4115VQ belongs to the digital audio interface transceiver class, within interface ICs and broader semiconductor signal-processing devices. This bidirectional-capable architecture helps consolidate digital-to-analog conversion, clock recovery, and digital audio routing into one dedicated component. The AK4115VQ supports 24-bit audio processing and a maximum 192 kHz sampling rate according to the manufacturer datasheet listing. Analog and digital supply voltages both range from 2.7 V to 3.6 V. The low-jitter analog PLL supports clock recovery from biphase-coded data and dedicated word-clock signals, while two crystal-oscillator options allow implementation with different reference-clock arrangements. These features make the device suitable for systems where clock quality and interface flexibility affect conversion performance. The transceiver architecture is intended to reduce the number of discrete digital-audio and decoding functions required in an audio subsystem. Low-jitter clock recovery is particularly important when the incoming data stream does not carry a clean external word clock. Dual oscillator support gives the circuit designer additional options for synchronizing internal and external timing domains. The 2.7 V to 3.6 V supply range also places the device in equipment using common low-voltage digital and analog rails. Typical applications include Dolby Digital audio decoding in surround-sound receivers, digital mixing consoles, DVD and Blu-ray player audio paths, broadcast equipment, and multichannel recording systems. The device is also useful in digital audio interface cards and professional monitor controllers where 24-bit conversion fidelity, high sampling rates, and reliable clock recovery are required. Designers should treat the analog and digital supplies as separate power domains and follow the manufacturer layout and decoupling guidance. The 10 mm by 10 mm LQFP package has 64 leads, so controlled differential clock routing, grounded analog sections, and careful assignment of noisy digital return currents are essential. Before layout release, verify all 64 pin assignments against the manufacturer pin-description table and confirm the selected oscillator and interface modes. This product page combines exact ordering information, supply and package details, functional comparison, replacement guidance, and practical layout considerations. It also identifies which similarly named AKM devices are not pin-to-pin replacements, preventing a functionally similar but footprint-incompatible part from being treated as a drop-in substitution.

RFQ پەیوەندی
AK4116VF - Low-Power 48 kHz Digital Audio Receiver | AKM
AK4116VF

AK4116VF - Low-Power 48 kHz Digital Audio Receiver | AKM

Asahi Kasei Microdevices/AKM AK4116VF is a low-power digital audio receiver designed for 48 kHz S/PDIF reception and available in a QFN package. The verified source identifies the device as an audio-channel IC and the associated datasheet describes a low-power 48 kHz digital audio receiver; detailed electrical ratings and package dimensions were not supplied in the verified excerpts. Its primary role is to receive a digital audio stream, recover the audio data, and present the decoded output to a digital audio system through the device’s supported interfaces. A digital audio receiver is an interface IC that converts a serialized digital audio signal into a form suitable for downstream processing. In an audio system, it sits between an external S/PDIF source and a codec, DSP, receiver, or other digital-audio processor. The receiver category is part of the broader audio-interface hierarchy: digital audio interface IC, audio codec interface, signal-conversion device, and semiconductor. The available verified material confirms a 48 kHz digital-audio focus, low-power operation as the manufacturer description, and QFN receiver packaging. The AK4116VF is identified by distributors as an audio-channel component and is listed in tape-and-reel packaging by one distributor source. Exact sampling-rate coverage, voltage limits, pin names, lock behavior, clock requirements, and package dimensions must be taken from the manufacturer datasheet before a board design is released. Typical use includes consumer audio equipment, digital amplifiers, sound-bar systems, optical or coaxial digital-audio inputs, and embedded audio products that need a dedicated S/PDIF receiver. The receiver can reduce the need for a host device to handle physical-layer recovery and format handling, although the downstream firmware or hardware must still configure the audio path and validate supported formats. Design integration should begin with the official AK4116 datasheet rather than distributor summaries. Confirm the package footprint, exposed-pad requirements, supply voltage, supported sample rates, serial output format, master-clock requirements, and signal-integrity recommendations. Route the incoming digital audio line as a short, controlled-impedance trace and provide the decoupling and grounding arrangement specified by the manufacturer. This page combines verified distributor identity, the available datasheet description, sourcing links, and application guidance. Because the supplied evidence does not include a complete manufacturer PDF or internal database specification set, missing technical values are explicitly marked rather than inferred. Confirm lifecycle, compliance, and exact electrical details against current manufacturer documentation before procurement or production.

RFQ پەیوەندی
AK4116VN 2.7-3.6V 24-Bit S/PDIF Receiver | AKM
AK4116VN

AK4116VN 2.7-3.6V 24-Bit S/PDIF Receiver | AKM

Asahi Kasei Microdevices AK4116VN is a low-power, single-channel S/PDIF digital audio receiver supporting up to 24-bit resolution and 48 kHz operation. It operates from a 2.7 V to 3.6 V supply and is packaged in a 20-VFQFN package measuring 4.2 mm by 4.2 mm. The device accepts S/PDIF or AES/EBU digital audio signals and provides a channel-status decoder supporting consumer and professional modes. A digital audio receiver is an interface IC that recovers clock and audio data from a serial digital-audio stream. In the broader electronics hierarchy, it belongs to audio interface ICs, interface ICs, and semiconductors. Its role is to convert an S/PDIF signal into a parallel or serial digital-audio representation suitable for an audio codec, DSP, ADC, or digital signal-processing system. This makes the AK4116VN useful when a board must accept a digital audio source while preserving channel-status information. Key features include support for resolution to 24 bit, operation at 48 kHz, automatic detection of a non-PCM bit stream, and support for both consumer and professional channel-status formats. Its low-power design is appropriate for compact consumer, industrial, and embedded audio equipment where a 2.7 V to 3.6 V supply is already available. The 20-pin VFQFN construction also supports dense, surface-mount PCB layouts. The AK4116VN is a one-channel audio receiver rather than a general-purpose codec. It is intended to receive an externally supplied digital stream, recover timing information, decode channel status, and present audio data to downstream logic. A system designer must therefore provide compatible clocking, grounding, input conditioning, and output-routing arrangements around the device rather than treating it as a complete audio signal chain. Typical applications include digital-audio input for home theater equipment, multichannel receivers, active speakers, recording interfaces, professional audio equipment, and embedded media systems. The 24-bit capability suits modern consumer and professional digital-audio links, while automatic non-PCM detection helps distinguish linear PCM from encoded or compressed transfers. When designing around this IC, verify the complete pinout, input format, clock requirements, and output timing against the manufacturer datasheet before layout release. In particular, treat S/PDIF signal integrity, supply decoupling, and the distinction between consumer and professional channel status as key design checks rather than assumptions. This page consolidates verified AKM device data, sourcing links, replacement analysis, and application guidance for engineers evaluating the AK4116VN. It also distinguishes documented characteristics from parameters that require confirmation from the full manufacturer datasheet.

RFQ پەیوەندی
AK4117VF - 192kHz 24-Bit S/PDIF Receiver | AKM Semiconductor
AK4117VF

AK4117VF - 192kHz 24-Bit S/PDIF Receiver | AKM Semiconductor

AK4117VF is a low-power 192kHz digital audio receiver from AKM Semiconductor, with support for S/PDIF and AES/EBU streams up to 24-bit resolution in a 24-LSSOP package. The receiver operates from a 2.7V to 3.6V supply and covers sample rates from 32kHz to 192kHz. A digital audio receiver is an interface IC that recovers timing and audio data from a serial digital stream, commonly called S/PDIF, AES/EBU, or professional digital audio. It converts the incoming serial representation into a parallel PCM output that can be connected to an audio codec, processor, converter, or digital recording system. AK4117VF belongs to the interface IC hierarchy and combines input conditioning, clock recovery, data detection, and status handling in one device. Key features include 24-bit data handling, sample-rate support through 192kHz, and an integrated channel-status decoder. The decoder supports consumer and professional modes and can automatically identify a non-PCM bit stream. These capabilities make the receiver useful in digital audio equipment, surround-sound systems, broadcast equipment, and professional audio interfaces. The AK4117 is designed to pair with a multi-channel audio codec. AKM identifies the AK4527B and AK4529 as example companion devices for building a complete AC-3 system. This modular arrangement separates digital stream reception from analog or multichannel conversion, allowing the receiver to feed audio data into a codec selected for the required channel count and output topology. Electrical design should preserve the integrity of the incoming digital-audio connection. The receiver operates from a narrow 2.7V to 3.6V range, so supply regulation and decoupling are important. Board layout should keep the digital input route short, provide a continuous ground reference, and follow the manufacturer’s recommended pin and layout guidance to avoid data errors. This page combines the verified AK4117VF specifications, manufacturer datasheet information, procurement references, and application guidance. It also distinguishes documented drop-in alternatives from unverified functional equivalents so engineers can make package- and pin-compatible decisions with fewer assumptions.

RFQ پەیوەندی
AK4120VF - 20-Bit 48 kHz Audio SRC | Asahi Kasei
AK4120VF

AK4120VF - 20-Bit 48 kHz Audio SRC | Asahi Kasei

The Asahi Kasei Microdevices AK4120VF is a 20-bit, 48 kHz-class audio sample-rate converter with integrated mixer and volume functions, supplied in a 24-VSOP package. Its verified 2.7 V to 3.6 V analog supply range and 8 kHz to 96 kHz operating sample-rate range place it in the audio interface and signal-conversion category, where it can reconcile digital audio streams operating at different clock domains. A sample-rate converter, commonly abbreviated SRC, is an interface IC that converts audio samples from one sampling frequency to another. In the product hierarchy, an SRC sits between a digital audio interface and a clock-conversion function; unlike a general-purpose codec, the converter concentrates on format-compatible rate conversion, clocking, and associated mixing or gain control rather than performing analog-to-digital or digital-to-analog conversion. This distinction is important when selecting an SRC for a consumer, broadcast, automotive, or industrial audio system. The AK4120VF combines a 20-bit converter with a mixer and volume control in one device. These functions allow adjacent digital audio paths to be combined and level-adjusted before or during rate conversion, reducing the need for separate digital mixer packages in designs where routing flexibility is required. The converter is specified for sample rates from 8 kHz through 96 kHz and uses a 24-LSSOP, also identified by distributors as 24-VSOP, measuring approximately 0.220 inch by 0.220 inch in body width. The 2.7 V to 3.6 V operating supply supports integration with low-voltage digital audio systems. The verified operating temperature range is -40 °C to +85 °C, covering industrial temperature conditions. Its 24-pin surface-mount format is suited to compact audio boards where a through-hole package would be impractical. Typical uses include digital audio distribution, clock-domain adaptation between source and destination equipment, consumer audio receivers, broadcast and professional audio equipment, and automotive infotainment subsystems. When using the device, the system clock tree and digital audio interface format must be configured consistently with the manufacturer data sheet. Decoupling should follow the application circuit and layout guidance in that document rather than generic assumptions. This page consolidates the verified package, electrical-supply, resolution, sample-rate, temperature, and commercial-availability information into an engineering-oriented reference. It also distinguishes same-family AKM alternatives from a verified drop-in claim and flags pricing and detailed pin-level information that were not present in the supplied source data.

RFQ پەیوەندی
AK4121AVF - 24-Bit Asynchronous Audio Sample Rate Converter | AKM
AK4121AVF

AK4121AVF - 24-Bit Asynchronous Audio Sample Rate Converter | AKM

The Asahi Kasei Microdevices AK4121AVF is an asynchronous sample rate converter for audio data, supporting sampling frequencies from 8 kHz to 96 kHz with a 3 V to 3.6 V supply in a 24-VSOP package. It converts digital audio streams whose clocks and sample rates differ, making the device useful in audio systems that require clock-domain isolation or format-rate adaptation. An asynchronous sample rate converter is a digital audio interface IC that accepts input audio samples at one clock-derived rate and reconstructs them at another output rate. Its role within an audio signal chain is broader than ordinary sample-format conversion: it must accommodate mismatched sample rates, generate the required output clock, and preserve usable audio quality while the system clock relationship is changing. The AK4121AVF is designed for applications involving digital audio sources, DACs, and clock domains operating at different rates. Key identified features include one-channel audio processing, a 24-VSOP surface-mount package, and an 8 kHz to 96 kHz sampling-frequency range. The 3 V to 3.6 V operating supply allows integration with common low-voltage digital audio systems. Because it is an asynchronous converter, the device can bridge independently generated or unrelated clocks instead of requiring both sides to share a continuous integer ratio. Its exact dynamic-range, bit-depth, clock-mode, and interface-format details must be confirmed from the manufacturer datasheet before schematic capture. The AK4121AVF occupies the interface and clock-conversion layer of a digital audio design. In a source-to-DAC architecture, it receives serial audio data and clock information, computes the appropriate sample correspondence, and presents a correctly paced stream to the downstream converter. Practical implementation depends on correct master/slave mode assignment, logical interface voltage compatibility, suitable source clocks, and stable supplies. A single converter channel also makes the part appropriate for mono paths and for applications that replicate or process channels separately. Typical uses include digital audio equipment, clock-domain adaptation between a host processor and an audio DAC, broadcast or communications audio paths, and consumer audio products that accept asynchronous rates. In a portable product, its 24-VSOP package and single-channel architecture can simplify routing compared with a multi-channel converter. In laboratory and industrial systems, the converter is useful when the incoming audio transport and output device cannot share one stable clock. Designers should verify the exact supported digital-audio formats, input and output clock requirements, serial word width, and recommended external components against the manufacturer datasheet. Layout must keep clock and data traces short, provide a low-impedance supply connection, and return unused interface pins according to the pin-description table. Signal-integrity and grounding choices are especially important when the converter separates two independently referenced audio clock domains. This page combines the identified AK4121AVF specifications, package information, sourcing workflow, design considerations, and verified substitution limits. It also distinguishes confirmed technical facts from parameters that require direct review of the manufacturer datasheet, helping engineers plan the interface before committing the 24-VSOP footprint to a PCB.

RFQ پەیوەندی
AK4122AVQ - 24-Bit 96kHz SRC with DIR | AKM Semiconductor
AK4122AVQ

AK4122AVQ - 24-Bit 96kHz SRC with DIR | AKM Semiconductor

AKM Semiconductor AK4122AVQ is a one-channel, 24-bit digital audio sample rate converter with an integrated digital audio receiver, supplied in a 48-LQFP surface-mount package measuring 7 mm by 7 mm. The device accepts input sample rates from 8 kHz to 96 kHz and produces output sample rates of 32 kHz, 44.1 kHz, 48 kHz or 96 kHz. Its internal PLL allows operation in slave mode without an external master clock. A sample rate converter, or SRC, is a digital audio interface device that resamples digital audio data from one clock domain to another. The AK4122AVQ combines this function with a digital audio receiver, or DIR, in one IC. Together, these blocks form part of the broader digital-audio signal chain: digital audio interface IC → sample rate converter → digital audio receiver → audio codec or digital signal processor. The primary functional characteristics are one-channel processing, 24-bit audio resolution, and operation up to 96 kHz. Input rates cover the commonly used 8 kHz through 96 kHz range, while selectable output rates include 32 kHz, 44.1 kHz, 48 kHz and 96 kHz. An internal phase-locked loop simplifies systems that previously required a separate master-clock source when the converter operates in slave mode. The AK4122AVQ is intended for digital audio equipment where source and destination clocks differ. Its architecture is based on a digital sample-rate-conversion stage and an integrated DIR rather than an analog conversion path. The DIR receives digital audio data and extracts timing information, while the SRC performs the rate conversion needed to align the incoming stream with the selected output rate. Typical uses include professional digital audio equipment, consumer audio processors, broadcast and recording interfaces, USB or network-audio bridges, and clock-conversion stages within multichannel audio systems. It is especially relevant when an upstream source produces 8 kHz to 96 kHz data while the downstream audio path requires one of the standard output rates. PCB implementation requires careful assignment of digital audio data, control signals, clock signals and power according to the manufacturer pin-description table. Decoupling should follow the datasheet's recommended network, while audio-clock and data traces should be routed with controlled impedance and minimized crosstalk to preserve signal integrity. This product page combines the device's stated conversion rates, digital-audio architecture, package information and practical design considerations. It also distinguishes verified production parameters from specifications that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.

RFQ پەیوەندی
AK4124VF - 192kHz 24-Bit Async SRC | AKM | Audio
AK4124VF

AK4124VF - 192kHz 24-Bit Async SRC | AKM | Audio

The Asahi Kasei Microdevices AK4124VF is a high-performance 192 kHz, 24-bit asynchronous sample-rate converter (SRC) supplied in tape-and-reel packaging. It is categorized as an audio-channel integrated circuit and is intended for digital-audio systems that require conversion between asynchronous sampling domains. The available verified information identifies a reel package quantity of 1000 units and an MSL level of 1 with unlimited floor life after handling. The AK4124VF is listed as obsolete by GlobalSpec, although distributor inventory and transactional listings remain visible. According to the distributor data, it supports audio sampling rates up to 192 kHz and operates with 24-bit audio data, positioning it for high-resolution digital-audio signal paths. An asynchronous sample-rate converter is an audio interface IC that converts a digital audio stream running at one clock rate into a stream operating at another rate. In the broader component hierarchy, the AK4124VF belongs to the family of digital audio converters and interface ICs used within professional audio, consumer audio, and networked-media equipment. Unlike a simple fixed-ratio clock divider, an asynchronous SRC estimates the input-to-output timing relationship and resamples the incoming PCM data. This capability is useful when the source and destination do not share a common, continuously synchronized master clock. The AK4124VF's principal verified features are a maximum sampling frequency of 192 kHz and 24-bit audio resolution. These figures suit high-resolution digital-audio systems where format conversion, clock-domain bridging, or asynchronous playback is required. The product is categorized specifically as an Audio Channel IC rather than a general-purpose codec, and its asynchronous SRC architecture distinguishes it from parts that merely accept one fixed sample-rate relationship. Exact dynamic-range, distortion, attenuation, channel-count, clocking, and voltage specifications were not present in the supplied source data and therefore require confirmation from the manufacturer datasheet before design release. The supplied distributor records also establish important procurement details. DigiKey identifies AK4124VF as an Asahi Kasei Microdevices/AKM audio-channel component and presents pricing and availability data, while Octopart states that two distributors participate in price comparison. GlobalSpec identifies the component as obsolete, categorized under Integrated Circuits, and lists EAR99 export-control classification. Its moisture-sensitivity designation is MSL 1, described as unlimited, while the package quantity is 1000 units on a reel. These verified attributes should be considered alongside the obsolete lifecycle status when planning new production. Potential applications include professional digital-audio equipment, asynchronous audio-clock bridging, high-resolution playback systems, digital mixers, and interface paths requiring conversion between 44.1 kHz, 48 kHz, 96 kHz, or 192 kHz streams. The 24-bit format supports high-resolution processing, and the 192 kHz ceiling allows the device to be used where source material exceeds conventional CD-rate sampling. System designers must still verify supported input and output rate combinations, supported data formats, required master-clock relationships, and digital I/O voltage levels against the manufacturer documentation. The principal design consideration is lifecycle risk. Because AK4124VF is reported as obsolete, new designs should not be committed without confirming long-term supply, authorized-channel traceability, and whether an approved second source exists. PCB designers should also reserve space and maintain a documented footprint based on the verified manufacturer package drawing rather than inferred dimensions. Input and output digital interfaces must be checked for voltage compatibility, and the power, ground, clock, and decoupling requirements must follow the manufacturer's reference circuit. This page consolidates verified distributor lifecycle, packaging, classification, and high-level conversion information, then adds engineering-focused application guidance and selection criteria. It also distinguishes verified facts from missing electrical details: unsupported numerical specifications are not inferred, and production decisions should use the manufacturer datasheet plus authorized-distributor availability records.

RFQ پەیوەندی
AK4125VF - 192kHz 24-Bit Stereo Audio SRC | AKM
AK4125VF

AK4125VF - 192kHz 24-Bit Stereo Audio SRC | AKM

The Asahi Kasei Microdevices AK4125VF is a stereo asynchronous digital audio sample rate converter with support for input and output rates from 8 kHz to 216 kHz and 24-bit data resolution, supplied in a 30-VSOP package. It converts between asynchronous clock domains so a digital audio system can operate its ADC, DAC, transport, or processor at different sampling rates while maintaining a common digital audio interface. A sample rate converter is an interface IC that changes the numerical sampling rate of a digital audio stream without requiring analog reconversion. Within the signal-chain hierarchy of semiconductor, interface IC, audio codec, and digital audio converter, the AK4125VF sits between source and destination audio devices. Its asynchronous operation allows the source and destination clocks to differ, making it useful in digital audio routing, recording, playback, broadcast, and consumer-equipment architectures. The verified product listing identifies the AK4125VF as a 2-channel, 24-bit converter reaching 192 kHz, with the device described as a high-performance asynchronous sample rate converter. Its input and output sample-rate coverage of 8 kHz through 216 kHz provides useful flexibility for studio, broadcast, and multimedia clock domains. The 30-VSOP, 0.220-inch, 5.60 mm-wide package is suitable for compact surface-mount audio equipment, although its pin count requires careful routing and connector-style layout planning. AK4125VF uses digital audio interfacing, with I²S identified in the verified distributor specification data. This makes it appropriate for systems whose source and sink expose compatible digital audio streams but cannot share a common sample-rate clock. In such designs, the converter can accept asynchronous data from one clock domain and present resampled data to another, reducing the need for redesigning the surrounding clock architecture. Typical uses include digital recording and playback interfaces, broadcast and studio signal processing, consumer audio equipment, and embedded systems that exchange audio between components operating at different rates. For each implementation, the designer must confirm clock topology, supported serial-audio format, master or slave operation, and control-interface requirements against the manufacturer datasheet before schematic signoff. A key design consideration is that asynchronous conversion does not remove the need for correct clock generation, grounding, and digital-signal routing. The source clock and destination clock should be clean, jitter-compatible signals, while the 30-pin package demands deliberate escape routing and stable supply decoupling. Validation should include sample-rate sweeps, lock behavior, word-length operation, and channel synchronization. This page consolidates verified distributor availability, package data, operating limits, and practical selection guidance. It distinguishes published AK4125VF attributes from values that still require confirmation from the manufacturer datasheet, helping engineers evaluate this converter before requesting a quote or committing a board layout.

RFQ پەیوەندی
AK4125XF - 192kHz 24-Bit Asynchronous SRC | AKM
AK4125XF

AK4125XF - 192kHz 24-Bit Asynchronous SRC | AKM

Asahi Kasei Microdevices AK4125XF is a 192 kHz, 24-bit high-performance asynchronous sample-rate-converter IC supplied in a 30-VSOP surface-mount package. The AK4125 family is designed for digital audio systems requiring conversion between different sampling frequencies, and the AK4125XF ordering code is associated with tape-and-reel production packaging. According to the indexed manufacturer datasheet, the device is specifically described as a 192 kHz/24-bit high-performance asynchronous SRC. A sample-rate converter is an audio interface IC that accepts digital audio data operating at one sample rate and produces data at another. Within the digital audio hierarchy, an asynchronous SRC sits between digital audio sources and receivers, codecs, converters, or playback equipment. The AK4125 family provides 24-bit processing and supports operation up to 192 kHz, making its application focus high-resolution digital audio rather than general-purpose signal conversion. The verified part data identifies AK4125XF as an integrated circuit and an audio channel device. Its defining verified characteristics are the 192 kHz maximum sampling-rate indication, 24-bit resolution, asynchronous sample-rate-conversion function, 30-VSOP package, and tape-and-reel packaging. These parameters distinguish it from ordinary fixed-rate digital filters and place it in applications where clock domains or source and destination sample rates differ. AK4125XF can be considered for professional and high-fidelity digital audio paths, broadcast and recording-system sample-rate alignment, asynchronous audio clock domains, and interface bridging between equipment operating at different sampling rates. The 24-bit format supports high-resolution audio workflows, while the 192 kHz capability accommodates high-rate studio streams. Actual interoperability still depends on the selected AK4125 operating mode, supported source and destination rates, serial audio format, clocking arrangement, and external component implementation documented in the manufacturer datasheet. The 30-VSOP package supports compact surface-mount assembly, but the exposed package geometry is not represented in the available package-diagram library. Consequently, the complete pin assignment is not asserted here and must be checked against the manufacturer AK4125 datasheet before PCB routing or prototype assembly. Engineers should also confirm the selected companion clock, logic, interface, and filtering components from that datasheet rather than inferring them from the ordering code. This page consolidates the verified manufacturer and distributor information for AK4125XF, including the 192 kHz/24-bit asynchronous SRC description, package information, sourcing links, application guidance, and confirmed site-listed related parts. It separates verified facts from parameters that still require datasheet confirmation, helping engineers identify the correct audio converter and plan a compliant PCB design without treating unverified electrical details as guaranteed specifications.

RFQ پەیوەندی
AK4127VF - 192kHz 24-Bit Stereo Asynchronous SRC | AKM
AK4127VF

AK4127VF - 192kHz 24-Bit Stereo Asynchronous SRC | AKM

The Asahi Kasei Microdevices AK4127VF is a 192kHz, 24-bit high-performance stereo asynchronous sample-rate converter with an internal PLL, supplied in a 30-pin VSOP package. It converts digital audio streams between input and output sampling rates ranging from 8kHz to 216kHz. Its primary role is clock-domain adaptation and asynchronous audio-rate conversion rather than analog amplification or DAC conversion. A digital sample-rate converter, or SRC, changes the sampling rate of a digital audio stream while preserving the represented signal. In an audio signal chain, an SRC sits between digital audio sources and receivers such as a DAC, codec, recorder, or playback engine. It helps reconcile mismatched clocks and rates while adding asynchronous rate conversion and phase-locked-loop synchronization functions. The AK4127VF supports stereo operation, 24-bit processing, and sample rates up to 192kHz according to the verified product description. Its internal PLL simplifies system configuration by helping establish the required digital audio timing. The device is intended for asynchronous audio applications where source and destination rates differ and predictable clock recovery is required. The AK4127VF is packaged in a 30-pin VSOP, also identified in distributor data as a 30-VSOP. The verified sources describe the part as an audio special-purpose or audio sample-rate converter IC. It is relevant to professional audio equipment, digital recording systems, broadcast and networking equipment, and other systems requiring digital audio format and clock-rate adaptation. Designers should verify the complete electrical interface, pinout, supported digital audio formats, clock requirements, supply rails, and control protocol against the manufacturer datasheet before layout. Because the supplied data does not include all pin-level electrical limits or interface timing values, those details are intentionally marked as needed rather than inferred. This page summarizes verified product positioning and source data for AK4127VF evaluation.

RFQ پەیوەندی
AK4128AEQ - 8-Ch 216kHz 24-Bit Audio SRC | AKM
AK4128AEQ

AK4128AEQ - 8-Ch 216kHz 24-Bit Audio SRC | AKM

The Asahi Kasei Microdevices AK4128AEQ is an eight-channel, 24-bit asynchronous digital sample-rate converter operating at sampling rates from 8 kHz to 216 kHz. The device accepts simultaneous asynchronous stereo audio streams, converts them to a common output sampling rate, and is packaged in a 64-pin LQFP measuring 10 mm by 10 mm. A digital sample-rate converter, or SRC, is a data-conversion IC that recalculates audio samples from one clock domain and sampling rate into another. The AK4128AEQ sits within the digital-audio signal chain between sources, codecs, DACs, and recording systems. It reduces the need for a shared master clock when devices use different clocks or when multiple asynchronous streams must be aligned to one output rate. The AK4128AEQ provides eight processing channels, 24-bit resolution, and a maximum sampling rate of 216 kHz. Its internal oscillator eliminates the requirement for an external master clock, while master mode and TDM data interfaces support simultaneous operation with multiple channels. These characteristics make the converter suitable for high-end car audio, DVD recorders, broadcast equipment, and professional digital-audio systems. The converter performs asynchronous sample-rate conversion rather than simply passing data through. Input samples may be supplied at independent rates between 8 kHz and 216 kHz, and the output operates in the same 8 kHz-to-216 kHz range. The internal clocking architecture therefore supports system simplification when upstream and downstream converters do not share a common clock source. Typical uses include multichannel automotive infotainment systems, high-resolution audio recorders, professional monitoring equipment, and broadcast consoles. Eight-channel operation reduces the number of discrete converters required when several audio domains are present. TDM support also provides a practical route to carrying multiple synchronized channels over a compact digital connection. When designing the PCB, route clock, data, and power connections according to the pin-description table in the manufacturer datasheet. Keep digital return paths controlled and place decoupling capacitors close to the supply pins. Confirm the selected operating mode, sample-rate ratios, and digital audio formats against the device configuration tables before finalizing the system clocking scheme.

RFQ پەیوەندی
AK4136VQ - 2-Channel 384kHz 32-Bit SRC | AKM
AK4136VQ

AK4136VQ - 2-Channel 384kHz 32-Bit SRC | AKM

The Asahi Kasei Microsystems AK4136VQ is a 2-channel asynchronous digital audio sample rate converter operating from 8kHz to 384kHz, processing up to 32-bit audio data in a 48-LQFP package. Its internal oscillator eliminates the need for an external master clock when used in asynchronous systems, simplifying clock-domain conversion between source and destination audio devices. A digital sample rate converter, or SRC, is an interface IC that resamples and filters digital audio between clocks with different frequencies. In the product hierarchy, a SRC belongs to digital audio signal-processing ICs and supports audio converters, receivers, network-audio equipment, and test systems. The AK4136 is particularly useful when a transmitter or player uses a different clock domain from the audio source. The AK4136 supports two channels, 32-bit audio processing, and input and output sample rates spanning 8kHz through 384kHz. According to the manufacturer datasheet, its internal oscillator means that external master clocks are not required for asynchronous conversion. This can reduce clock-tree complexity, although the converter still requires correct power, ground, digital-interface, and signal-integrity implementation. The 32-bit format and 384kHz maximum rate suit high-resolution audio paths, studio equipment, broadcast infrastructure, digital audio workstations, and consumer systems that need format or clock-domain adaptation. A practical design must still account for required input and output formats, supported clock configurations, filter behavior, grounding, decoupling, and signal routing; those details must be checked in the complete manufacturer documentation. The principal design consideration is integration. The AK4136VQ can simplify systems where input and output rates are unrelated because its internal oscillator supports asynchronous operation. This avoids one external master-clock source, but it does not eliminate the need for stable local supplies, short digital traces, controlled return paths, and verification of the converter configuration during startup. This page consolidates the verified manufacturer datasheet, distributor availability, package information, technical search context, and practical engineering guidance. It intentionally avoids asserting electrical, pin, lifecycle, or drop-in replacement details that were not present in the supplied source data.

RFQ پەیوەندی
AK4137EQ - 2-Channel 32-Bit 768kHz Audio SRC | AKM
AK4137EQ

AK4137EQ - 2-Channel 32-Bit 768kHz Audio SRC | AKM

The Asahi Kasei Microdevices AK4137EQ is a two-channel digital sample rate converter supporting input and output sample rates from 8kHz to 768kHz, with 32-bit processing and PCM-DSD conversion capability in a 48-LQFP 7x7 mm package. It is designed for high-end audio systems, USB-DACs, and digital-audio equipment that must reconcile different sampling domains. A digital sample rate converter is an interface IC that resamples or changes the clock rate of digital audio data between incompatible source and destination rates. The AK4137EQ includes an internal oscillator, so it does not require an external master clock for its asynchronous conversion operation. This simplifies system configuration when the source and destination audio domains use unrelated clocks. Key features include two-channel operation, 32-bit sample processing, asynchronous conversion, input and output rates spanning 8kHz to 768kHz, and PCM-DSD data conversion. The internal oscillator reduces external clock infrastructure, while the broad sample-rate range supports professional audio, USB-DAC, and multirate digital-audio designs. The device is supplied in a 48-LQFP package identified by DigiKey as 48-LQFP (7x7). The AK4137EQ is intended for applications where audio data arrives from a source clock domain and must be delivered to a DAC, decoder, recorder, or other digital-audio subsystem operating at another rate. Its sample-rate flexibility makes it useful for format bridging, asynchronous playback paths, and PCM-to-DSD or DSD-to-PCM conversion as described by the manufacturer. Designers should verify the complete pinout, interface logic, clock requirements, supported audio formats, control signaling, and electrical limits against the manufacturer datasheet before layout or firmware implementation. The available verified sources do not provide complete pricing, pin-level assignments, or detailed timing tables, so those values remain data-needed rather than inferred.

RFQ پەیوەندی
AK4140VF - 24-Pin Digital BTSC Decoder | Asahi Kasei Microdevices
AK4140VF

AK4140VF - 24-Pin Digital BTSC Decoder | Asahi Kasei Microdevices

Asahi Kasei Microdevices AK4140VF is a digital BTSC decoder integrated circuit packaged in a 24-pin VSOP configuration. Its primary role is decoding broadcast television sound signals processed through the Broadcast Television Sound System (BTSC) framework. The AK4140VF combines digital decoding functionality into a compact surface-mount package suited to television receivers, video equipment, and other consumer systems that incorporate compatible BTSC audio processing. A BTSC decoder is a signal-processing semiconductor that converts encoded broadcast audio into usable audio channels. In the broader product hierarchy, it belongs to the decoder IC and digital audio decoder family, which falls within integrated circuits and consumer audio signal-chain devices. Unlike a general-purpose microprocessor, the AK4140VF is designed around a defined broadcast-audio decoding function, allowing television and video manufacturers to add compatible audio reception without implementing the complete decoding process in general-purpose logic. The AK4140VF is identified in the product listing as a digital BTSC decoder and is offered in a 24-pin VSOP package. Tape-and-reel ordering associated with the AK4140VF-E2 designation provides a production-oriented package option for automated assembly. The VSOP-24 format supports a compact board footprint while exposing 24 electrical connection positions. Exact electrical ratings, clock requirements, interface voltages, and decoder performance figures must be taken from the manufacturer datasheet before a new design is released. The component occupies the television audio signal path between compatible received broadcast information and the system's audio output stages. Its dedicated decoder architecture can reduce the processing burden placed on a system controller compared with a software-driven implementation. A hardware decoder may also provide predictable execution independent of general-purpose processor workload, although final audio quality and channel behavior depend on the complete receiver design rather than on the integrated circuit alone. Typical applications include analog and digital television receivers, video receivers, broadcast monitoring equipment, and television products supporting BTSC-compatible audio decoding. Because the AK4140VF is a legacy consumer broadcast-audio device, engineers should confirm lifecycle status, sourcing continuity, and exact orderable suffix requirements before committing a new production design. Existing equipment can use the part for maintenance when the package, pin configuration, and electrical conditions match the original assembly. The most important design check is exact pin compatibility. Do not infer interchangeability from the shared AK4140 family name alone: compare every power pin, ground connection, interface signal, timing requirement, and package dimension against the original schematic and datasheet. Preserve the manufacturer-recommended decoupling and signal-routing layout, particularly around the audio decoder and its external support components. This page consolidates the AK4140VF product identity, digital BTSC decoder function, 24-pin VSOP package information, verified source links, application context, and replacement-review criteria. It is intended to help engineers locate documentation and evaluate whether an existing board can reuse the device without requiring a redesign.

RFQ پەیوەندی
AK4186EN - 12-Bit Resistive Touch Controller | AKM
AK4186EN

AK4186EN - 12-Bit Resistive Touch Controller | AKM

The Asahi Kasei Microdevices/AKM AK4186EN is a low-power touchscreen controller for 4-wire and 5-wire resistive touch panels, with a 12-bit SAR A/D converter and an I2C serial interface in a 16-QFN 3 x 3 mm package. It operates from a 1.6 V to 3.6 V supply, making it suitable for systems powered by low-voltage microprocessors. A touchscreen controller is an interface IC that converts the electrical response of a resistive panel into digital position and pressure data. It sits between the analog touch-panel electrodes and the digital host processor. In the system hierarchy, the AK4186EN belongs to the touchscreen-controller family, interface IC category, and broader semiconductor or embedded-control ecosystem. Key features include support for both 4-wire and 5-wire resistive panels, a 12-bit successive-approximation-register A/D converter, and a sampling rate of 22.2 kHz. The 12-bit conversion resolution preserves fine movement distinctions in touch-driven menus, while the 22.2 kHz sampling rate supports responsive input sampling in consumer and embedded human-interface systems. The serial I2C interface allows the controller to connect to a host processor over a compact two-wire bus, reducing the number of external connections compared with parallel controller solutions. Its 1.6 V minimum operating voltage supports direct operation in low-voltage embedded designs where the host uses a 1.8 V or 2.5 V supply. The 3 x 3 mm QFN package also supports compact panel-module layouts. Typical uses include handheld terminals, panelized control interfaces, industrial operator panels, instrumentation, and compact portable products that employ 4-wire or 5-wire resistive touchscreens. Controller selection should match the panel wiring topology, touchscreen impedance, sampling requirements, host I2C implementation, and mechanical footprint. For layout work, use the pin-description table and typical application circuit in the manufacturer datasheet to assign the analog touch inputs, supply rails, ground connections, and I2C signals. Validate the complete panel-to-controller signal path against the actual touch-panel impedance and the host firmware sampling configuration before production release. This page combines the device function, electrical envelope, package identity, application guidance, and design cautions in one engineering-focused reference. It also identifies the drop-in-replacement gap identified by cross-reference research, so engineers can avoid assuming that electrically similar touchscreen controllers are pin-compatible.

RFQ پەیوەندی
AK4188EN - 12-Bit 4-Wire Resistive Touch Controller
AK4188EN

AK4188EN - 12-Bit 4-Wire Resistive Touch Controller

The Asahi Kasei Microdevices AK4188EN is a 4-wire resistive touchscreen controller with a 12-bit conversion resolution, an SPI interface, and support for external or internal voltage references. It is packaged in a compact 16-QFNJ surface-mount package measuring 3 mm by 3 mm with a 0.5 mm pin pitch, making it suitable for space-constrained human-interface designs. A touchscreen controller is an interface IC that converts the resistance measurements produced by a resistive touch panel into digital position data. The AK4188EN belongs to the touchscreen controller class of interface semiconductors, connecting analog resistive sensor inputs to a digital host processor. Its 12-bit position resolution supports finer coordinate differentiation than an 8-bit controller, while the serial peripheral interface transfers measurement results through a compact, deterministic serial connection. Key characteristics include support for both internal and external voltage references, a 4-wire resistive panel interface, a 12-bit converter resolution, and an SPI host interface. The 16-QFNJ package reduces board area compared with larger leaded or dual-row packages, and its 0.5 mm pitch supports compact consumer and embedded control layouts. The manufacturer datasheet lists the operating temperature range as -40°C to +85°C. AK4188EN is suited to portable equipment, industrial operator panels, appliance interfaces, test equipment, and other products that use a resistive touchscreen instead of a capacitive panel. Resistive panels remain useful where stylus input, glove operation, or cost-sensitive sensor construction is more important than multi-touch capability. The SPI interface also suits systems in which the host already has an SPI peripheral and can process controller data through a shared bus. When laying out the PCB, route the touchscreen analog inputs away from switching nodes and keep the component-side ground connection compact. Provide local bypass capacitance at the supply pins according to the manufacturer's application guidance, and verify the voltage-reference configuration in the device datasheet before calibration. The controller's analog-to-digital conversion performance also depends on panel calibration, which should be repeated when the enclosure, overlay, or mounting pressure changes. This page consolidates the exact package, interface, resolution, temperature, sourcing, and design information for AK4188EN, together with verified cross-reference results and engineering guidance for integrating a resistive-touch panel into a compact embedded interface.

RFQ پەیوەندی
AK4205EN - Stereo Headphone Amp, 36-QFN | Asahi Kasei
AK4205EN

AK4205EN - Stereo Headphone Amp, 36-QFN | Asahi Kasei

The Asahi Kasei Microdevices AK4205EN is a stereo headphone amplifier interface designed for high-resolution mobile audio, with a 36-QFN 5 x 5 mm package and a 4.5 V to 6.5 V supply range. It combines a built-in analog switch, ultra-low-noise operation, and exceptional signal purity, including a specified THD+N of -118 dB. A headphone amplifier is a specialized audio interface IC that accepts left and right analog signals, provides the voltage gain and output drive required by stereo headphones, and can include switching functions for shared audio paths. Within the semiconductor hierarchy, the AK4205EN belongs to the interface IC family within integrated circuits and audio signal-chain devices. Its built-in analog switch helps reduce the need for separate routing hardware in compact mobile equipment. The AK4205EN's principal features include stereo headphone output, a 4.5 V to 6.5 V operating supply range, a 36-WFQFN exposed-pad package measuring 5 x 5 mm, and THD+N of -118 dB. The built-in analog switch is a particularly useful integration feature for portable devices that must route audio among internal playback, headset, or external-accessory paths while maintaining a compact component count. From an architectural perspective, the device is designed around low-noise, low-distortion signal handling for Hi-Fi mobile applications. The -118 dB THD+N figure indicates that the manufacturer emphasizes high-fidelity reproduction rather than basic playback capability. Because the AK4205EN includes both headphone amplification and analog switching, PCB design must treat the audio signal path, supply connections, exposed pad, and switching-control nets as a single integrated analog subsystem. Typical uses include high-resolution mobile phones, portable music players, digital audio players, compact headphones, and battery-powered consumer devices. Its 36-QFN format supports space-constrained designs, while the low-distortion target benefits portable equipment intended to reproduce subtle high-frequency and low-level audio content. The integrated analog switch may also simplify designs requiring a managed transition between playback and headset connections. Careful PCB implementation is essential because a 5 x 5 mm QFN leaves limited clearance between pads and the exposed thermal pad. Place input, output, supply, and ground connections according to the manufacturer pin-description table, maintain short analog traces, provide local supply bypassing, and connect the exposed pad to the intended ground or thermal plane. Confirm the exact exposed-pad connection and recommended decoupling network in the manufacturer datasheet before release to production. This product record combines the AK4205EN's verified package, voltage, distortion, and switching characteristics with application-oriented implementation guidance. It also identifies the scarcity of qualified same-footprint drop-in replacements, helping engineers distinguish a true production substitution from a merely similar headphone-amplifier product that would require different routing, pin assignment, or board-level redesign.

RFQ پەیوەندی