Interface ICs
ژێرپۆلەکان
بەرهەمەکان (5,100+)
DG409DY+ - Dual 4:1 CMOS Analog Multiplexer | Analog Devices
Analog Devices DG409DY+ is a dual 4:1 CMOS analog multiplexer with two independently controlled switch circuits, 100 ohm on-resistance, and a 16-lead SOIC package. It routes one of four differential inputs per circuit to a common output, making it suitable for analog signal selection, instrumentation, test systems, and multichannel measurement equipment. The DG409 family is identified as a production product by Analog Devices. An analog multiplexer is an interface IC that connects multiple analog signal paths to a shared output while preserving the selected signal. The DG409DY+ belongs to the CMOS analog multiplexer hierarchy, where four channels and two switch circuits provide bidirectional signal routing for differential or paired single-ended measurements. Its differential 4:1 organization makes it more appropriate than an 8:1 single-ended multiplexer when a system must preserve two related signals together. Key features include two 4:1 analog switch circuits, maximum on-resistance of 100 ohm, and a 16-SOIC package. According to the manufacturer product page, the redesigned DG408 and DG409 devices provide guaranteed matching between channels of 8 ohm maximum and signal-range flatness of 9 ohm maximum. These channel-matching and flatness characteristics help minimize errors when different input sources feed downstream conversion or measurement circuitry. The DG409 architecture uses monolithic CMOS switches and TTL/CMOS-compatible control inputs, allowing microprocessor, microcontroller, or logic-level addressing. The mux provides low on-resistance in either signal direction, making the selected channels suitable for bidirectional routing. Designers should still account for switch resistance, off-channel leakage, supply limits, settling behavior, and the analog signal range when determining whether the architecture meets an application's accuracy and bandwidth targets. Typical applications include differential sensor acquisition, automated test equipment, data acquisition systems, sample-and-hold networks, signal routing for measurement front ends, and multiplexed control paths. The DG409DY+ is particularly useful when several sensors or test nodes must be selected without duplicating a complete analog front end. Its two independent 4:1 sections also permit simultaneous selection of two related channels. For layout, place the selected source and destination traces close to the device and route them away from high-current switching nodes. Use a continuous ground plane, minimize connector stubs, and provide local bypass capacitance on the supply pins. Confirm the power polarity and maximum supply voltage against the manufacturer datasheet before connecting the part. This product page combines the DG409DY+ architecture, verified package information, pin-compatible alternatives, application guidance, and practical layout considerations to support faster component selection and board-level implementation.
DG409DY+T - Dual 4:1 CMOS Analog Multiplexer | Analog Devices
Analog Devices DG409DY+T is a dual 4:1 CMOS analog multiplexer with two independent 4:1 switching functions, 100 ohm on-resistance, and a 16-pin narrow SOIC package. The device routes one of four differential input pairs to each common output pair, making it suitable for signal-routing and channel-selection systems. Its tape-and-reel order code supports automated surface-mount assembly. An analog multiplexer is an interface IC that connects one selected source channel to a common destination while electrically isolating the unselected channels. In the product hierarchy, the DG409 belongs to analog switches and multiplexers, interface ICs, and semiconductor signal-routing devices. A differential 4:1 configuration is especially useful when a system must preserve two related signal paths, such as the positive and negative sides of a differential measurement or communication channel. The DG409 series provides two 4:1 circuits, a 100 ohm on-resistance, and improved operation as a pin-compatible upgrade for the industry-standard DG408 and DG409 devices. According to the Analog Devices DG409 documentation, the family is intended for audio-signal routing, communication systems, data acquisition, guidance and control systems, sample-and-hold circuits, and test equipment. These applications benefit from centralized selection of one of four differential sources without requiring a separate switch for every signal pair. Internally, the DG409 uses CMOS analog switching to control the selected paths. The two address inputs associated with each multiplexer determine which of the four differential channels is connected to the common outputs. Because the device combines address-controlled routing with a 16-pin SOIC footprint, it simplifies board layouts where multiple instrument or communication channels must be scanned through a shared analog front end. Typical uses include multiplexers in automated test systems, differential signal acquisition modules, communication-channel selectors, sample-and-hold circuits, audio routing networks, and industrial control or guidance systems. The differential architecture reduces the number of external routing components compared with handling each polarity as an unrelated single-ended signal, while the integrated two-circuit count supports two simultaneous selection functions. PCB design should preserve the manufacturer's pinout and decoupling guidance, keep analog traces short, and provide an adequate ground return around the mux. Verify that signal amplitudes remain inside the device's electrical limits and that downstream loads do not exceed the specified switch characteristics. Because the on-resistance contributes directly to signal loss and noise, sensitive acquisition paths should account for the 100 ohm switch impedance during gain and bandwidth planning. This page combines the confirmed family and ordering details with practical routing guidance, pin-compatible alternatives, package comparisons, and design notes. The alternatives are separated by functional equivalence and manufacturing source so engineers can identify a board-compatible replacement without confusing it with a device that merely provides similar multiplexing functionality.
DG411AK - Quad SPST 30 Ohm Analog Switch | Maxim Integrated
The Maxim Integrated DG411AK is a quad, independently controlled SPST analog switch with four 1:1 channels, a typical on-resistance of 30 ohms, and a 16-pin CERDIP package. The device is intended for military-temperature signal-routing applications and uses TTL- and CMOS-compatible control inputs. It provides a 16-terminal through-hole DIP-style package for systems that require a rugged, socketable analog switching element. An analog switch is a semiconductor interface that connects or disconnects signal paths under digital control. The DG411AK belongs to the analog switch hierarchy, where each of its four single-pole, single-throw channels independently routes one signal. This makes the device useful where several precision or instrumentation signals must be selected, isolated, sampled, or connected to a common measurement chain. Unlike a mechanical relay, it changes state electronically without moving contacts. Key characteristics include four independent SPST switches, 1:1 signal routing, 30-ohm on resistance, on-resistance matching to 3 ohms maximum, and guaranteed on-resistance flatness of 4 ohms maximum across the signal range. The matched resistance improves channel-to-channel consistency, which is important when several switches contribute to the same measurement path. TTL- and CMOS-compatible inputs simplify connection to older logic systems as well as modern control circuitry. The DG411AK is specified as a military-grade part, and the A suffix identifies the package and temperature treatment associated with the DG411 family. Its 16-pin CERDIP construction is intended for through-hole PCB assembly rather than surface-mount production. Because the switches operate independently, one control signal can be asserted without changing the state of the other three channels, allowing partial signal-path isolation. Typical uses include precision test and measurement systems, data-acquisition front ends, analog instrumentation, signal-routing matrices, and military or aerospace electronic assemblies. In a measurement system, the four channels can route different sensor or source signals into a common amplifier or converter. The matched on-resistance is especially useful when channel-dependent insertion error must remain small. PCB design should preserve the pin arrangement defined by the manufacturer datasheet, provide adequate clearance around adjacent high-voltage or low-level signal paths, and route control traces away from sensitive analog nets. Because this is a through-hole military-temperature component, designers should also account for lead soldering, cleaning residue, vibration, and thermal cycling during system qualification. The 30-ohm resistance is appropriate for moderate-impedance instrumentation but may require a lower-resistance switch in high-bandwidth or high-precision applications. This product page organizes the DG411AK electrical characteristics, package information, commercial sourcing workflow, genuine drop-in alternatives, and application-oriented design guidance for engineers evaluating or replacing this quad SPST analog switch.
DG411CJ+ - Quad SPST Analog Switch | Analog Devices
Analog Devices DG411CJ+ is an improved quad, single-pole single-throw analog switch with four independent normally closed switch circuits and TTL- and CMOS-compatible control inputs. It is supplied in a 16-pin PDIP package for through-hole PCB installation. The manufacturer identifies the DG411 family as production devices and describes the switch family as low-on-resistance matching and flatness designs, with on-resistance matching up to 3 ohms and signal-range flatness up to 4 ohms. An analog switch is an integrated semiconductor device that routes analog or digital signals under electronic control. In the broader hierarchy, an analog switch belongs to interface ICs, alongside multiplexers, demultiplexers, and switch matrices. The DG411CJ+ is useful when a system must connect, isolate, sample, or route four independent signal paths without using mechanical relays. Key benefits of the DG411 family include matched behavior among the four switches, low on resistance, fast switching, and CMOS-compatible logic control. The normally closed topology means each switch conducts when its control input is in its inactive state and opens when commanded. This behavior can simplify fail-safe signal paths, though exact control-state interpretation should be confirmed from the manufacturer datasheet before implementation. The DG411 family comprises multiple package and temperature options. The CJ+ ordering code specifically identifies the 16-pin PDIP package, so it should not be confused with surface-mount or military-package variants. Its through-hole format is useful for legacy instrumentation, laboratory equipment, industrial controls, and hand-built or low-volume systems where SOIC or dual-inline-package assembly is preferred. Typical uses include multimeter and test-equipment signal routing, sample-and-hold paths, industrial sensor interfaces, audio test systems, and analog measurement chains. Because the device is an integrated circuit rather than a power semiconductor, a safe operating area chart is not applicable. Thermal and switching analysis should instead consider package dissipation, control timing, signal amplitude, load impedance, and the selected external circuitry. The principal design consideration is package interchangeability. Verify the CJ+ package suffix, pin orientation, and SPST normally closed behavior against the current manufacturer datasheet before substitution. PCB layout should keep control traces away from sensitive analog paths, use a solid ground reference, and place protection or settling networks where required by the source and destination impedances.
DG411CUE+ - Quad 45Ω SPST Analog Switch | Analog Devices
The Analog Devices DG411CUE+ is an improved quad, SPST analog switch with four independently controlled 1:1 channels, a 45 Ω on-resistance rating, and a 16-pin TSSOP package. It supports bidirectional analog signal paths and is specified for 0°C to +70°C operation. The DG411 family is listed in production, making the DG411CUE+ suitable for precision signal routing, test equipment, and general-purpose analog control systems. An analog switch is an electrically controlled semiconductor device that connects or disconnects signal paths with minimal disturbance to the signal being routed. The SPST designation identifies a single-pole, single-throw configuration, while the DG411CUE+ provides four such switch circuits in one package. In the signal-chain hierarchy, it belongs to the analog switch and multiplexer family within interface ICs, where it sits between sensors, amplifiers, data converters, and external instrumentation. Key characteristics include a 45 Ω maximum on-resistance, 1:1 signal routing, four switch circuits, and bidirectional analog-channel operation. Analog Devices states that the redesigned DG411, DG412, and DG413 family provides improved matching between switches, with a maximum on-resistance matching figure of 3 Ω, and guaranteed on-resistance flatness across the signal range of no more than 4 Ω. These characteristics help reduce channel-to-channel variation and distortion when routing precision signals. The DG411CUE+ uses CMOS-based switching elements controlled by digital logic inputs. Because its channels are bidirectional, the switched nodes can carry signals in either direction, subject to the voltage and current limits defined by the manufacturer datasheet. Its 16-pin TSSOP surface-mount package supports compact PCB layouts while providing separate control and signal connections for four analog switches. Typical uses include multimeter and oscilloscope input routing, automated test equipment, sample-and-hold systems, industrial measurement interfaces, and audio or communication signal-path switching. In these applications, the four independent channels can reduce the number of discrete relays or mechanical switch elements needed when a design requires several signal connections to be rerouted under digital control. PCB design should keep the analog signal pins and associated traces away from high-current switching nodes and clocked digital circuitry. Follow the Analog Devices DG411 datasheet pin description and typical application circuits for the exact control logic, supply requirements, input voltage limits, and recommended external components. Confirm signal amplitude and switching speed against the device limits before finalizing the routing design. This product page combines the manufacturer’s DG411 family information with package, ordering, regulatory, and cross-reference details. It also organizes practical selection guidance, comparison parameters, and PCB-focused design notes to help engineers evaluate the DG411CUE+ for new analog-routing designs.
DG411CY+T - Quad SPST Analog Switch | Analog Devices
The Analog Devices DG411CY+T is a quad, independently controlled, SPST analog switch with a 1:1 signal configuration, 45 ohm on resistance, and a 16-pin SOIC package. It is designed to route low-voltage analog or digital signals when low power consumption, compact integration, and bidirectional conduction are important. The device combines four switches in one package, reducing board area compared with discrete single-channel implementations. An analog switch is an integrated semiconductor that connects or disconnects signal paths under digital control. The DG411 family belongs to the broader switch and multiplexer hierarchy, where multiplexers combine multiple inputs onto an output and demultiplexers distribute one input among several outputs. This particular quad SPST architecture gives each switch an independent path rather than sharing a common internal channel. Key features include four 1:1 switch channels, 45 ohm nominal on resistance as identified for the DG411CY+T listing, on-resistance matching within 3 ohm maximum between switches, and on-resistance flatness within 4 ohm maximum over the signal range. The family also provides low charge injection, low power consumption, and ESD tolerance of at least 2000 V according to the Analog Devices data sheet. The DG411CY+T uses independently driven control inputs and is intended for low-voltage signal routing. According to the manufacturer information, the switches conduct equally well in either direction while the device is on. This bidirectional behavior makes the switch suitable for systems where the signal source can move between input and output roles, such as selectable test paths, measurement interfaces, and compact control systems. Typical uses include sample-and-hold systems, test and measurement equipment, battery-powered instruments, industrial control interfaces, and audio or communication signal routing. Four independently controlled switches can implement four separate point-to-point paths, while the 16-pin SOIC package supports conventional surface-mount assembly and straightforward PCB fanout. Designers should pay attention to control logic levels, supply voltage, signal amplitude, and switch timing before assigning a signal. Keep routing short, provide a stable ground reference, and avoid exceeding the voltage limits specified for the control inputs and switched terminals. The analog manufacturer data sheet should be used as the authoritative reference for the complete pin assignment and electrical limits.
DG411DJ+ - 4-Channel SPST Analog Switch | Analog Devices
The Analog Devices DG411DJ+ is a four-channel, single-pole single-throw CMOS analog switch with a 45 ohm on resistance, operating from 10 V to 30 V in a 16-pin PDIP package. The four independent normally closed switches support 1:1 signal routing and are controlled by TTL- and CMOS-compatible logic inputs. An analog switch is a semiconductor-controlled routing device that connects or disconnects an analog signal path under digital control. The DG411 belongs to the analog-switch hierarchy, where a CMOS switch IC combines low-voltage control logic with low-power, high-impedance off-state behavior. It is intended for precision test, measurement, audio, video, and industrial signal-routing systems where a compact four-channel device reduces component count. The DG411 family provides improved matching among its four switches and guaranteed on-resistance flatness across the signal range. According to the Analog Devices DG411 product page and manufacturer datasheet, redesigned DG411 devices feature on-resistance matching of 3 ohm maximum and on-resistance flatness of 4 ohm maximum. These characteristics are useful when several channels must present similar resistance to precision measurement and signal-conditioning circuits. The normally closed configuration routes each switched node to its corresponding common terminal while the control input is asserted. This differs from normally open SPST switches, which leave the signal path disconnected until enabled. DG411DJ+ combines four independent channels in one 16-pin PDIP package, allowing simultaneous routing of multiple sensor, audio, video, or test signals without using four separate switch packages. Typical uses include audio and video signal routing, automated test equipment, sample-and-hold front ends, data acquisition systems, battery-powered instrumentation, and industrial measurement modules. The monolithic CMOS implementation provides high input impedance and low leakage, while the low on resistance helps reduce signal attenuation when a channel is closed. The principal design consideration is signal voltage and logic compatibility. Verify the absolute maximum signal and supply limits in the manufacturer datasheet, do not exceed the 30 V supply-voltage ceiling, and ensure the control levels meet the device's TTL- or CMOS-compatible input thresholds. The 16-pin through-hole package also requires adequate lead spacing, insertion clearance, and protection from electrostatic discharge during handling. This product page consolidates verified distributor availability, manufacturer information, comparison data, and practical application guidance for engineers evaluating the DG411DJ+ as a quad SPST routing device.
DG411DY+ - 4-Channel 45Ω SPST Analog Switch | Analog Devices
The Analog Devices DG411DY+ is a 4-channel, single-pole single-throw CMOS analog switch with 45 Ω maximum on-resistance, TTL- and CMOS-compatible control inputs, and a 16-pin SOIC package. The four independent switches route one source terminal to one drain terminal each, making the device suitable for analog signal selection, test systems, instrumentation, and signal isolation. An analog switch is a solid-state semiconductor that connects or disects an analog signal path under digital control. The DG411 belongs to the analog switch and multiplexer hierarchy, where multiplexers combine multiplexing or demultiplexing functions and analog switches provide individual routing paths. Its CMOS implementation offers low power requirements and compatibility with digital control systems, while the normally closed architecture provides a defined connection state when control signals are absent. Key verified characteristics include four independent SPST channels, a 1:1 signal configuration, 45 Ω maximum on-resistance, and a 16-SOIC package. The manufacturer identifies the DG411 family as improved, with low on-resistance matching between switches of 3 Ω maximum and guaranteed on-resistance flatness of 4 Ω maximum over the signal range. These characteristics are important when several channels must present similar resistance to precision measurement or acquisition circuits. The DG411 series is designed around low on-resistance matching and flat on-resistance behavior. Matching reduces channel-to-channel gain or measurement variation, while flatness helps preserve signal behavior as the analog voltage changes. The family uses TTL- and CMOS-compatible digital inputs, allowing its control signals to be driven by common digital logic while switched signals remain in the analog domain. Typical uses include battery-powered test equipment, automated measurement interfaces, signal routing in instrumentation, communication equipment, and data-acquisition systems. Because the device is an analog switch rather than an amplifier, ADC accuracy also depends on source impedance, settling behavior, leakage, reference quality, and the surrounding signal chain. The verified source data does not provide complete timing, leakage, supply-current, and absolute-maximum-rating values, so those specifications require confirmation from the manufacturer datasheet before design release. The principal design consideration is verifying control levels, supply arrangement, signal excursion, and channel polarity against the complete datasheet. Place the device close to the source and destination circuits to minimize trace resistance and capacitance. Account for 45 Ω maximum on-resistance in the signal-path budget, especially for high-value sources or precision dividers. Do not infer ratings from a distributor category listing alone; use the manufacturer datasheet for electrical limits and test conditions. This product data combines the verified manufacturer overview, distributor package and pricing references, and practical replacement guidance. It distinguishes documented facts from unavailable parameters, helping engineers evaluate DG411DY+ for routing applications without inventing missing electrical data.
DG411DY-E3 - Quad SPST 35Ohm CMOS Analog Switch | Vishay
The Vishay Siliconix DG411DY-E3 is a precision monolithic quad SPST CMOS analog switch IC featuring four independent 1:1 single-pole single-throw switches with a maximum on-resistance of 35 ohm, housed in a 16-pin SOIC package (0.154 inch, 3.90 mm width). It is a lead-free, RoHS-compliant member of the DG411 family designed for high-speed, low-error switching of precision analog signals. An analog switch is a semiconductor device that routes or blocks analog signal paths under digital control, sitting within the broader taxonomy: analog switch IC -> signal switch -> interface/signal-conditioning IC -> semiconductor. Quad SPST switches like the DG411 are the workhorses of analog front-end design, replacing electromechanical relays and discrete JFET switching where board space, speed, and reliability matter. Key features include extremely low power consumption of approximately 0.35 uW, TTL- and CMOS-compatible digital inputs, and low on-resistance matching between the four switches. The CMOS transmission-gate architecture conducts equally well in either direction, supporting bipolar analog signal swings when dual supplies are used. The -E3 suffix denotes tin/lead-free plating with RoHS compliance for modern assembly processes. Technically, each switch is built as a CMOS transmission gate with an n-channel and p-channel MOSFET in parallel, driven by level-shifting gate control circuitry derived from the digital input. This topology keeps on-resistance relatively flat over the analog signal range and minimizes charge injection, which is critical for sample-and-hold, integrator-reset, and audio signal-routing accuracy. Typical applications include audio and video signal switching, precision test-and-measurement signal routing, sample-and-hold circuits, and data-acquisition channel multiplexing, where its 35 ohm channel resistance and low quiescent power keep inserted errors and thermal drift small. Designers should verify total supply voltage headroom: the DG411 family is specified for dual supplies in the region of plus/minus 15 V, and signal swings must remain within the supply rails to avoid latch-up or increased distortion. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
DG411DY-T - Quad SPST 45Ω Analog Switch | Analog Devices
Analog Devices DG411DY-T is a four-channel, single-pole single-throw CMOS analog switch with a 1:1 signal configuration, 45 Ω typical on-resistance, and a 16-pin SOIC package. It provides four independent switches for routing analog or digital signals while operating from a dual supply, and its control inputs are compatible with TTL and CMOS logic. An analog switch is a semiconductor device that connects or isolates signal paths under digital control. The DG411 family belongs to the interface-IC hierarchy, combining analog switching functions with logic-compatible control. Each of its four independent SPST channels can route a source node to one destination node, making the device suitable for signal multiplexing, test equipment, instrumentation, communication systems, and data-acquisition designs. The DG411DY-T offers four independent switch channels, 45 Ω on-resistance, and TTL/CMOS-compatible control inputs in a 16-SOIC package. The redesigned DG411 family also specifies on-resistance matching between switches of 3 Ω maximum and guaranteed on-resistance flatness across the signal range of 4 Ω maximum. These characteristics help reduce channel-to-channel impedance mismatch when multiple signals share similar routing paths. Its monolithic CMOS implementation combines analog switching with low-power digital control. Four separately controlled channels permit independent signal selection rather than forcing a fixed multiplexing arrangement. Designers must still account for supply voltage, input and output signal limits, control-logic levels, switch charge injection, and the bandwidth of the selected operating mode when matching the device to precision measurement circuits. Typical uses include multimeter and oscilloscope input routing, automated test systems, sensor signal conditioning, industrial control interfaces, and communication equipment. The four-channel architecture is particularly useful when a board must route several precision signals through a common measurement or conversion stage. The 16-SOIC package also supports conventional surface-mount assembly and external routing on both sides of the PCB. A critical design consideration is preserving the full-scale input and output signal range. The control interface, supply rails, and analog signal limits must be checked together because a valid logic command does not by itself guarantee safe operation for every analog voltage. The manufacturer product page and datasheet should be used to confirm absolute maximum ratings, electrical characteristics, and pin assignments before layout release. This product overview combines the DG411 family architecture, verified package and switching specifications, practical application guidance, and package-compatible replacement information. It is intended to help engineers determine whether the DG411DY-T meets their routing, logic-interface, precision, and assembly requirements before committing the part to a PCB design.
DG411DYZ - Quad 35Ohm SPST Analog Switch | Renesas Electronics
The Renesas Electronics DG411DYZ is a monolithic quad SPST CMOS analog switch with four independent normally closed channels, 35 ohm on-state resistance, 175 ns turn-on time, and 145 ns turn-off time in a 16-pin SOIC package. It is designed for precision signal switching and supports bilateral operation over a ±15 V analog input range. An analog switch is an integrated semiconductor device that routes or isolates signals under digital control. The DG411 belongs to the analog-switch hierarchy, which includes CMOS analog switches, multiplexers, and demultiplexers. Each of its four SPST channels connects one analog source and drain when the associated control input activates it, allowing one IC to manage four separate signal paths. The DG411DYZ provides low on-state resistance of 35 ohms, fast switching performance, and closely matched channel resistance. Manufacturer specifications indicate that on-resistance matching between switches is limited to 3 ohms maximum, while on-resistance flatness across the signal range is limited to 4 ohms maximum. These characteristics reduce signal-dependent distortion when switching precision audio, video, instrumentation, or control signals. The four switches are bilateral and can conduct AC or DC signals in either direction. TTL-compatible and CMOS-compatible control inputs simplify connection to common digital controllers. The manufacturer also positions the DG411 family as a drop-in replacement for the DG211 and DG212 families, providing a practical upgrade path for existing high-voltage switching designs while preserving the familiar 16-pin footprint. Typical uses include audio and video routing, precision measurement systems, industrial signal multiplexing, data-acquisition front ends, and control systems requiring multiple independently switched analog paths. Its four normally closed channels are especially useful when a default connection must remain active until a control signal commands a transition. Choose power-supply rails according to the manufacturer datasheet and ensure that input, control, and analog signals remain within their permitted voltage limits. Pay particular attention to supply sequencing and off-state isolation when the switch handles high-impedance sensors. Decoupling should be placed close to the supply pins, while sensitive analog routing should minimize parasitic capacitance and leakage paths. This product page combines the DG411DYZ electrical characteristics, drop-in replacement considerations, comparison data, and practical layout guidance into a compact engineering reference for analog-signal routing designs.
DG411FDY+ - Quad Fault-Protected SPST Switch | Analog Devices
The Analog Devices DG411FDY+ is a quad, rail-to-rail, fault-protected SPST analog switch with four independent 1:1 switch circuits, a maximum on-resistance of 35 ohms, and a 16-pin SOIC package. Its listed dual supply operating range is -20 V to -4.5 V and 4.5 V to 20 V, with an extended range up to 36 V, while the supported temperature interval is -40°C to +85°C. An analog switch is a semiconductor device that routes signals between terminals under digital control. The DG411F family belongs to the analog switch and multiplexer hierarchy, where SPST means single-pole, single-throw and 1:1 means the conducting path connects one terminal to one terminal rather than selecting among multiple channels. Fault-protected, rail-to-rail construction is useful when signals may approach the supply rails or exceed the normal operating range during fault conditions. The DG411FDY+ provides four independently controlled switches in one 16-SOIC package. The distributor listing identifies 220 ns turn-on time, 160 ns turn-off time, and 47 pF input capacitance. Its 35-ohm maximum on-resistance supports low-voltage analog routing, while the four-circuit arrangement reduces component count when several signals must be isolated, sampled, or connected to instrumentation. The device is specified for positive and negative supply operation from 4.5 V to 20 V and -20 V to -4.5 V, with operation extending to 36 V in one supply arrangement. These rail-to-rail capabilities make the switches suitable for bipolar analog signals and systems whose signal range is close to the available supply voltage. Operating temperature is -40°C to +85°C, allowing use in industrial and extended-temperature equipment. Typical uses include test and measurement input selection, sensor multiplexing, audio signal routing, data-acquisition systems, and analog isolation networks. The DG411FDY+ is particularly appropriate when four independent signal paths are required and a conventional mechanical relay would be too large, slow, or power-hungry. Its 220 ns turn-on and 160 ns turn-off characteristics also make it more responsive than electromechanical switching at signal frequencies where those transition times matter. PCB design should preserve the pinout and pin numbering shown in the manufacturer datasheet, provide a continuous ground reference, and route sensitive analog traces away from switching nodes and digital control lines. Check signal amplitude against the negative and positive supply limits, verify the operating voltage before enabling a switch, and account for capacitance when driving long traces or high-impedance sources. This product page combines the manufacturer device description with practical selection, application, replacement, and PCB guidance. It also distinguishes pin-compatible ordering options from alternatives that use a different package, helping engineers evaluate replacement choices before committing to a board layout.
DG412CJ+ - 4-Channel SPST Analog Switch | Maxim Integrated
The Maxim Integrated DG412CJ+ is a 4-channel, independently controlled SPST analog switch IC with a 45 Ω on-resistance specification, housed in a 16-pin PDIP package. The device is designed for signal routing in test, measurement, communication, and industrial control systems where four separate analog paths must be selected with low distortion and controlled resistance. An analog switch is an interface IC that connects or disconnects a signal path under digital control. The DG412CJ+ belongs to the analog switch family, which sits within interface ICs and broader semiconductor signal-routing systems. Its four SPST channels provide simple on/off selection rather than multiplexing several inputs onto one output. This makes it suitable for bypassing, routing, isolation, and test-fixture applications where the signal must preserve amplitude and waveform integrity. The verified product information identifies the DG412CJ+ as an improved, quad, SPST analog switch. Maxim describes the DG411, DG412, and DG413 family as featuring low on-resistance matching between switches, with a maximum matching value of 3 Ω, and guaranteed on-resistance flatness over the signal range, with a maximum flatness difference of 4 Ω. These characteristics help reduce channel-to-channel variation and signal amplitude errors in precision analog paths. The manufacturer product page also lists a 1ku list-price starting point of $3.68. The CJ+ ordering code uses the manufacturer’s 16-pin PDIP package, making it appropriate for through-hole prototyping, educational platforms, and legacy or industrial assemblies where a socketed DIP footprint is preferred. The four control inputs are intended for digital control, while the switched terminals carry analog signals. The design must still be checked against the complete datasheet for absolute maximum ratings, switch configuration, control logic, charge injection, off leakage, and operating limits. Typical uses include selecting one of several sensor outputs, isolating instrumentation inputs, controlling analog test paths, routing audio or communication signals, and implementing sample-and-hold or measurement front ends. Because the device is a physical switch rather than an active amplifier, system performance depends on source impedance, signal amplitude, control timing, parasitic capacitance, and PCB leakage. Use a ground plane, short analog traces, and an appropriate bypass strategy when integrating it into a mixed-signal board. The DG412CJ+ is a sensible choice when four independent SPST paths, a DIP package, and low matched on-resistance are required. For a new compact design, a surface-mount equivalent may simplify assembly; for a different multiplexing architecture, a mux or demux device should be considered instead. This page combines the verified manufacturer and distributor information with practical selection, application, and design guidance.
DG412CY+T - 45Ω Quad SPST Analog Switch | Analog Devices
The Analog Devices DG412CY+T is an improved quad, 4-circuit SPST analog switch with a maximum on-resistance of 45 Ω, low on-resistance matching, and bidirectional signal conduction in a 16-pin SOIC package. It is organized as four independent single-pole, single-throw switches, making it suitable for routing test, measurement, control, and low-frequency analog signals without requiring a redesign of an existing SOIC-16 footprint. An analog switch is a semiconductor device that connects or disconnects a signal path under digital control. A quad SPST switch contains four separate SPST channels rather than one multiplexed channel. In the broader hierarchy, the DG412CY+T is an analog switch, an interface IC, and a semiconductor designed to bridge external analog circuitry with digital control logic. This makes it useful wherever several independent signals must be routed under software or hardware control. Key electrical features include maximum on-resistance matching of 3 Ω and guaranteed on-resistance flatness across the signal range of 4 Ω. The device also provides low charge injection, low power consumption, and bidirectional operation. According to the Analog Devices DG412 product page, the switch family guarantees ESD tolerance of at least 2000 V under Method 3015.7. These characteristics help preserve signal integrity when switch transitions can disturb sensitive analog nodes. The DG412CY+T uses CMOS technology and provides four independent SPST circuits rather than a multiplexed configuration. Its maximum on-resistance of 45 Ω is appropriate for many control and instrumentation signals where insertion loss is not the dominant concern. Bidirectional conduction means the same terminal pair can carry signal in either direction while the switch is closed, simplifying routing symmetry and reducing the number of signal-direction assumptions in system design. Typical uses include automated test equipment, data acquisition systems, sample-and-hold isolation, peripheral selection, battery and power-system routing, and analog signal conditioning. The four independent channels are especially useful when a controller must select sensors, connect external instrumentation, or isolate several signal sources. Designers should evaluate charge injection and switching transients when driving high-impedance or precision measurement nodes. For PCB implementation, route each switched signal directly to the assigned IN and OUT pins, place the device close to the signals it controls, and keep digital control traces away from sensitive analog conductors. Confirm the control-logic polarity and off-state behavior in the application circuit, and account for the 45 Ω on-resistance when calculating source impedance, settling time, and allowable attenuation. This page combines the manufacturer’s device information with drop-in alternatives, parameter comparisons, application guidance, and practical layout considerations. It is intended to help engineers identify a pin-compatible part, verify the electrical trade-offs, and integrate the DG412CY+T confidently into an existing 16-pin SOIC design.
DG412DJ+ - 45Ω Quad SPST Analog Switch | Maxim Integrated
The Maxim Integrated DG412DJ+ is a four-channel, single-pole single-throw CMOS analog switch rated for a maximum 44 V supply and a 15 V analog signal range. Its four independent SPST switches provide 1:1 signal routing in a 16-pin PDIP package. The device is specified with 45Ω on-resistance, 110 ns turn-on time, and low power dissipation of 0.35 mW. An analog switch is a semiconductor device that connects or isolates an analog signal path under digital control. The DG412DJ+ belongs to the analog switch hierarchy, where CMOS switching transistors replace mechanical contacts for faster operation, compact integration, and electronic control. Its four independent channels can each connect one analog terminal to one switched terminal, making the device suitable for signal multiplexing, sampling, test-point isolation, and routing systems. The principal features include four independent SPST switches, a 44 V maximum supply rating, and a 15 V analog signal range. According to the manufacturer datasheet, on-resistance matching between switches is maintained to 3Ω maximum, while guaranteed on-resistance flatness across the signal range is 4Ω maximum. These characteristics help reduce channel-to-channel resistance variation when the same control sequence drives multiple signal paths. The DG412DJ+ uses TTL- and CMOS-compatible digital inputs, allowing straightforward interfacing with microcontrollers, FPGA I/O, and logic families. Its 110 ns turn-on time supports faster signal-path changes than traditional relay-based implementations. The monolithic CMOS construction also enables low power dissipation, with the datasheet listing 0.35 mW for the characterized operating condition. Typical applications include multiplexed sensor acquisition, audio and communication signal routing, automated test equipment, data acquisition systems, and general-purpose analog signal isolation. The four-channel arrangement is especially useful when several independent sources must be selected without using mechanical relays. Signal integrity and transient requirements should still be checked against the actual source impedance, load, bandwidth, and supply conditions. For PCB implementation, use the 16-pin PDIP footprint and route the digital control signals to minimize switching noise coupling into sensitive analog nodes. Decoupling capacitors should be placed close to the supply and ground pins, while switched analog traces should be kept short and away from control clocks. Confirm absolute maximum ratings, logic thresholds, and off-state isolation before finalizing the design. This product page combines manufacturer specifications, package details, application guidance, and same-footprint replacement information to support faster component evaluation. It also highlights the principal trade-offs engineers should assess: on-resistance variation, switching speed, logic compatibility, power dissipation, and the mechanical constraints of a through-hole PDIP package.
DG412DVZ - Quad SPST CMOS Analog Switch | Renesas
Renesas Electronics DG412DVZ is a monolithic quad CMOS analog switch containing four independent single-pole, single-throw (SPST) switches configured as normally open devices. The 16-TSSOP package provides a compact surface-mount solution for routing low-voltage analog or digital signals. Each switch has a 1:1 signal configuration and an on-resistance specified at 35 ohms by the product listing. An analog switch is a semiconductor interface that connects or isolates circuit nodes under digital control. The DG412 belongs to the broader hierarchy of CMOS analog switches, multiplexer and demultiplexer devices, and signal-routing integrated circuits. Its four independent SPST channels allow separate control of four signal paths instead of forcing the designer to use one common multiplexer configuration. This makes the device suitable for analog measurement, test, communication, and control systems where independent routing is required. The key verified features are four switch circuits, 1:1 signal routing, 35-ohm on resistance, normally open SPST construction, CMOS-compatible control, and a 16-pin TSSOP package. The normally open architecture keeps each switched path disconnected until its corresponding control input activates it. This behavior is useful when signal integrity, fault isolation, or predictable default states matter. The compact TSSOP outline also supports denser layouts than a larger through-hole package. Renesas describes the DG412 family as monolithic CMOS analog switches with four independent SPST channels and TTL- and CMOS-compatible digital inputs. The DG412 series is positioned as a drop-in replacement for the earlier DG211 and DG212 device families. Its independent architecture separates each analog path while providing digital control from common logic systems, which is important in instrumentation and embedded test equipment. Typical uses include signal isolation between a sensor and an analog-to-digital converter, channel selection in automated test systems, routing control signals between circuits, and disconnecting unused loads. In each case, the 35-ohm on resistance influences signal attenuation and drive requirements. Engineers should also verify the complete electrical limits and control timing from the manufacturer datasheet before operating signals near the device's specified limits. PCB implementation requires care because analog switches can inject charge into high-impedance nodes and can respond to fast control-edge transients. Place the device close to the switched signal, provide a stable ground reference, and route control inputs away from sensitive analog traces. Avoid long unprotected control wires, and use the pin-description table in the manufacturer datasheet when assigning every TSSOP connection. This page organizes the verified DG412DVZ product identity, package information, purchasing path, technical comparisons, and replacement guidance into one engineering-focused reference. It also identifies where application-specific electrical requirements must be checked against the DG411/DG412/DG413 datasheet before a board design is released for production.
DG412DY+ - 4-Channel SPST Analog Switch | Analog Devices
The Analog Devices DG412DY+ is an improved quad SPST CMOS analog switch with four independent circuits, 1:1 signal routing, 45 ohm on-resistance, and a 16-pin SOIC package. It is designed for precision analog-signal switching where each channel can connect a source node to one of two load nodes. Bidirectional conduction supports signal flow in either direction, while the four independent control inputs allow channel-by-channel routing. An analog switch is a semiconductor device that uses digital control signals to connect or disconnect analog paths. The DG412 family belongs to the analog-switch and multiplexer hierarchy, where an analog switch provides one selectable path, a multiplexer combines multiple paths, and a demultiplexer distributes one path among multiple destinations. CMOS implementations are widely used because they can combine low control-input current, broad signal-voltage handling, and compact integration. The DG412DY+ uses improved low-on-resistance matching between switches, with a maximum matching difference of 3 ohm, and guaranteed on-resistance flatness across the signal range, with a maximum variation of 4 ohm. These characteristics reduce channel-to-channel gain and resistance errors when several switched paths feed precision measurement, test, signal-routing, or data-acquisition circuits. Break-before-make behavior prevents the two sides of a switch from being connected simultaneously during transition. The device supports TTL-compatible control logic and single-supply operation. Its four SPST channels can be used independently to select test paths, route sensor outputs, disconnect external loads, or implement sample-and-hold isolation stages. The low-resistance matching and controlled switching behavior make it especially useful where adding resistance-induced error or inconsistent channel loading would degrade system accuracy. When laying out the DG412DY+, place input and output traces away from fast digital control and clock nets to minimize capacitive coupling. Keep the analog paths short, use a continuous ground plane, and decouple the supply close to the device. Confirm that every switched signal remains inside the operating voltage range and that break-before-make timing satisfies the source and load requirements. This page combines the manufacturer product information, distributor identifiers, pin-compatible comparison data, application guidance, and practical PCB considerations. It is intended to help engineers identify whether the DG412DY+ fits a routing design, how it compares with other switch families, and which constraints must be checked before PCB release.
DG412DY+T - 45Ω Quad SPST Analog Switch | Analog Devices
The Analog Devices DG412DY+T is a four-channel, independently controlled SPST CMOS analog switch with a 45 Ω on-resistance, supplied in a 16-pin SOIC package. It accepts TTL-compatible and CMOS-compatible control inputs and is designed for routing precision analog signals where four separate switch paths are required. The improved DG412 design also provides tightly controlled on-resistance matching of 3 Ω maximum and guaranteed on-resistance flatness of 4 Ω maximum across the signal range. An analog switch is a solid-state semiconductor device that connects or isolates an analog signal path under digital control. The DG412 belongs to the CMOS analog-switch hierarchy, combining low on-resistance, bidirectional signal conduction, and fast control-interface operation. Unlike a mechanical relay, it operates without moving contacts, making it suitable for compact signal-routing systems, test equipment, data-acquisition modules, and instrumentation. The DG412 provides four independent single-pole, single-throw channels rather than a multiplexed or differential architecture. Each channel can connect its source terminal to its drain terminal when the corresponding digital control input is asserted. The 45 Ω characteristic gives the device better conduction performance than a high-resistance analog switch while retaining the simple control and low power characteristics expected from a CMOS implementation. The redesigned switch network emphasizes matching and flatness. An on-resistance difference of 3 Ω maximum between switches reduces channel-to-channel gain variation when the four paths carry comparable signals. A maximum on-resistance variation of 4 Ω over the signal range limits distortion caused by resistance changing with signal amplitude. These characteristics are especially useful in instrumentation, audio paths, sensor interfaces, and automated test systems where repeatable channel behavior matters. Typical uses include signal isolation, analog test-point selection, precision measurement front ends, and general-purpose analog routing. The 16-lead SOIC format supports conventional surface-mount assembly and accommodates four control inputs, four analog input paths, four analog output paths, power connections, and associated device terminals. Digital controls should be driven with valid logic levels and adequate rise and fall times to obtain the stated switching performance. For layout, place each routed signal on a continuous return path with minimal parasitic capacitance, especially when driving capacitive loads. Keep control traces away from sensitive analog inputs, use a local ground reference for the switch, and follow the manufacturer pin-description table when assigning PCB tracks. This page combines device specifications, same-footprint alternatives, engineering guidance, and practical selection criteria to support design-in decisions.
DG412EUE+ - Quad SPST Analog Switch | Analog Devices
Analog Devices DG412EUE+ is an improved quad SPST analog switch with four independently controlled 1:1 channels, 45 ohm on resistance, and a 16-pin TSSOP package. It is designed for bidirectional analog-signal routing and supports an operating temperature range of -40°C to +85°C. The device is listed in production by the manufacturer and is suitable for precision test systems, measurement equipment, and signal-routing circuits. An analog switch is a semiconductor device that connects or disconnects signal paths under digital control. As an analog switch, the DG412EUE+ belongs to the broader switch IC and interface IC hierarchy. Its four SPST channels provide independent normally open paths, allowing one controller to select among several analog sources or destinations while preserving the selected signal without converting it to a digital representation. The DG412 family is engineered for improved channel matching, with on-resistance matching specified at no more than 3 ohms. Guaranteed on-resistance flatness across the signal range is specified at no more than 4 ohms. These characteristics reduce channel-to-channel gain variation and distortion when multiple switched paths must operate consistently. The DG412EUE+ also provides bidirectional operation, allowing each SPST path to conduct signal flow in either direction. The compact 16-pin TSSOP package supports surface-mount PCB assembly and provides access to four control inputs, four analog terminals, ground connections, and positive supply connections. Device control and signal-path details must be assigned using the pin-description table in the manufacturer datasheet. The EUE ordering code identifies the 16-pin TSSOP configuration, while the trailing plus sign denotes the manufacturer's improved product designation. Typical uses include automated test equipment, instrumentation, communications routing, sample-and-hold systems, and peripheral-selection networks. The four independent SPST switches are especially useful where one board must route several precision analog channels without adding mechanical relays. Because the switch resistance and flatness characteristics are controlled, engineers can evaluate insertion loss and channel matching across the intended signal range rather than relying only on the nominal 45-ohm value. PCB design should keep analog routes short and symmetric, place decoupling capacitance close to the supply pins, and provide adequate return paths for control and switched signals. The TSSOP footprint offers finer routing density than a larger SOIC package, but it requires careful land-pattern construction and clean assembly practices. Verify logic levels, supply voltage, signal-range limits, and switching conditions in the manufacturer datasheet before finalizing the interface circuit. This page combines the production status, package information, switch characteristics, thermal limits, and available drop-in comparison information into an application-oriented resource. It also identifies design considerations that help engineers evaluate the DG412EUE+ alongside pin-compatible alternatives without overlooking package, control-interface, or signal-integrity differences.
DG413CJ+ - 4-Channel SPST Analog Switch | Analog Devices
Analog Devices DG413CJ+ is a four-channel, single-pole single-throw analog switch with a maximum on-resistance of 45 ohm, a maximum switching time of 145 ns, and a PDIP-16 through-hole package. The verified product information identifies four normally open SPST switches, a supply range of ±4.5 V to ±20 V, and an operating temperature range of 0 C to +70 C. It is designed for routing analog signals in test, measurement, instrumentation, and signal-conditioning systems where four independent channels must be switched from common control circuitry. An analog switch is an integrated semiconductor device that connects or disconnects signal paths under digital control. The DG413 belongs to the analog-switch and multiplexer hierarchy, using MOSFET switch elements to control voltage or current paths. Unlike a mechanical relay, it provides compact, solid-state switching and is intended for low-voltage signal routing rather than power switching. Its four-channel architecture lets one system control multiple analog measurement or signal nodes efficiently. The DG413 family is documented by Analog Devices as an improved quad SPST analog switch with low on-resistance matching between switches and guaranteed on-resistance flatness over the signal range. Verified manufacturer-family information states that the redesigned DG411, DG412, and DG413 switches provide on-resistance matching of 3 ohm maximum and on-resistance flatness variation of 4 ohm maximum. This helps reduce channel-to-channel error in instrumentation and test systems. The DG413CJ+ is specifically identified as the PDIP-16, through-hole ordering variant. The device supports dual supplies from -20 V to -4.5 V and +4.5 V to +20 V, with a maximum dual supply span stated as ±20 V. Its four normally open SPST channels can be used to route external signals, sample-and-hold paths, or measurement inputs. The 145 ns maximum off time and 45 ohm maximum on-resistance are useful when timing and insertion resistance matter, although the verified data does not provide every timing threshold or control-pin detail. Typical applications include automated test equipment, oscilloscope and instrument signal routing, data-acquisition systems, sensor interface switching, communication signal conditioning, and control systems requiring multiple analog paths. Designers should account for the relatively high 45 ohm maximum on-resistance compared with modern low-resistance switches, especially when driving high-impedance sensors or precision divider networks. A key design consideration is the ±4.5 V minimum dual supply requirement. The through-hole PDIP-16 package is appropriate for through-hole assembly, prototyping, repair, and industrial control boards, but it is not interchangeable with surface-mount TSSOP-16 variants without a package redesign. This page combines verified manufacturer-family information, distributor observations, package details, and design guidance for DG413CJ+ selection and replacement planning.
DG413CY+ - 4-Channel SPST Analog Switch | Analog Devices
The Analog Devices DG413CY+ is an improved quad SPST analog switch IC with four independent, normally open switch channels, 45 ohm typical on-resistance, and a 16-pin SOIC package. The verified distributor listings identify the device as a 4-circuit 1:1 analog switch, while the manufacturer describes the DG413 family as production devices with improved on-resistance matching and guaranteed flatness across the signal range. An analog switch is an electronic semiconductor device that routes signals between circuit nodes under digital control. The DG413 belongs to the analog switch family within the broader interface IC and signal-routing hierarchy. Each of its four SPST channels connects one input terminal to one output terminal when enabled, allowing a system controller to select, isolate, or route external signals. The normally open configuration leaves the signal path disconnected until the appropriate control input is asserted. The DG413CY+ is specified as a 4-channel, 1:1 SPST switch with 45 ohm on-resistance in a 16-SOIC package. The family is used in sample-and-hold circuits, test and measurement equipment, signal routing, and other applications requiring controlled analog connectivity. The manufacturer’s product information specifically highlights improved low on-resistance matching between switches and guaranteed on-resistance flatness over the signal range, helping preserve signal integrity when multiple channels must behave consistently. The CY+ ordering code identifies the leaded 16-SOIC configuration, and the distributor results list both tube and tape-and-reel order variants under the DG413CY+ family. The product page identifies the DG413 family as production, so the listed DG413CY+ is presented as an active analog switch option. DG413CY+T is also listed by DigiKey and Arrow, while DG413DY+ is identified in comparison results as another 16-pin NSOIC member of the DG413 family. For drop-in sourcing, verify the exact pinout, enable polarity, and package dimensions in the manufacturer datasheet before substituting a related ordering code. The verified data identifies the product as a 16-SOIC part, but it does not provide a complete pin table, control logic levels, channel leakage, charge injection, switching time, supply-voltage range, or temperature limits. Those parameters should be obtained from the DG413 manufacturer datasheet before final circuit approval. This page combines the verified manufacturer and distributor information, same-package family alternatives, pricing references, and application-focused design guidance. It is intended to help engineers identify the correct DG413CY+ ordering code and distinguish it from related SOIC and TSSOP versions without assuming unreported electrical details.
DG413CY+T - Quad SPST Analog Switch | Analog Devices
The Analog Devices DG413CY+T is an improved quad, single-pole single-throw analog switch with four independent 1:1 switching circuits, a 45 ohm on-resistance rating, and a 16-pin NSOIC package. It is designed for routing analog signals between circuit nodes while providing complementary normally-open and normally-closed paths in each switch section. An analog switch is an integrated semiconductor device that connects or disconnects an electrical signal under digital control. The DG413 belongs to the analog switch and multiplexer hierarchy within interface ICs. Its four SPST sections can operate independently, making it suitable for signal-path routing, test systems, measurement circuits, and analog signal-conditioning equipment. Key features include four switch circuits, 1:1 signal routing, a 45 ohm maximum on-resistance specification, on-resistance matching between switches of 3 ohm maximum, and guaranteed on-resistance flatness of 4 ohm maximum over the signal range. The redesigned switch family also supports bidirectional signal conduction, allowing each switch path to conduct equally well in either direction. The device operates across positive and negative analog signal ranges identified for the DG413 family. Its low on-resistance matching improves consistency when several switch sections are used in parallel or when signal attenuation must remain predictable across channels. Because it is an analog switch rather than a mechanical relay, the part provides compact, solid-state signal routing and is controlled by digital logic levels. Typical applications include four-channel analog signal routing, bidirectional test-point multiplexing, sample-and-hold interfaces, instrumentation signal paths, and control systems that require independent normally-open or normally-closed contacts. Each circuit can be controlled separately when the host system requires four distinct routing decisions. PCB design should preserve the manufacturer's recommended pin arrangement and provide adequate clearance around the 16-pin NSOIC body. Because the switch handles analog signals, trace resistance, connector leakage, off-state behavior, and control-logic timing can influence overall system accuracy. Review the DG413 datasheet pin description and electrical characteristics before finalizing signal paths. This product page combines manufacturer specifications, package information, verified sourcing references, and practical design guidance. It also identifies the directly comparable 16-SOIC alternatives that can be evaluated when designing a new board or replacing an existing DG413-family device.
DG413DJ-E3 - Quad SPST CMOS Analog Switch 35 Ohm | Vishay
The Vishay Siliconix DG413DJ-E3 is a precision monolithic quad SPST CMOS analog switch with 35 ohm maximum on-resistance, four independent 1:1 switching channels, and a wide 5 V to 44 V supply range, housed in a 16-pin PDIP (0.300 in, 7.62 mm) through-hole package. An analog switch is a semiconductor device that routes or blocks analog signal paths under digital control, sitting within the broader hierarchy of interface ICs and signal routing components. Quad SPST switches such as this part provide four independent single-pole single-throw contacts that can pass signals in either direction with high off-isolation, unlike relays or discrete FET solutions which are larger and slower. The DG413 family from Vishay, like the related Analog Devices and Renesas DG411/DG412/DG413 parts, combines a 2-Normally-Open / 2-Normally-Closed channel configuration with TTL and CMOS-compatible logic inputs. Key features include 35 ohm on-resistance, low charge injection of 5 pC, -85 dB crosstalk at 1 MHz, and low off-state capacitances of 9 pF (CS(off)) and 9 pF (CD(off)). The device operates from -40 C to +85 C ambient and supports dual supplies of +/-13.5 V to +/-16.5 V as well as single-supply operation across the 5 V to 44 V range. Architecturally, the part uses CMOS transmission-gate switching cells driven by level-shifting logic inputs, enabling low error switching of precision analog signals with fast switching times. The E3 suffix denotes Vishay's lead-free, RoHS-compliant finishing. Typical applications include precision signal routing in test and measurement instrumentation, industrial process-control signal multiplexing, audio signal switching, and data-acquisition front-end channel selection where high off-isolation and low charge injection preserve signal fidelity. A key design consideration is that logic inputs must swing to the appropriate supply rails; driving the switch with logic levels referenced outside the supply range causes incorrect switching or damage. This page synthesizes distributor availability data, drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet.
DG413DY+ - 4-Channel SPST CMOS Analog Switch | Analog Devices
The Analog Devices DG413DY+ is a precision monolithic quad SPST CMOS analog switch with four independently selectable channels, a 45 Ω on-resistance specification, and a 16-SOIC package. Designed for high-speed, low-error routing of analog signals, the DG413DY+ operates from single or dual supply rails and accepts signals ranging between 4.5 V and 30 V. An analog switch is an integrated circuit that connects or disconnects signal paths under digital control. The DG413DY+ belongs to the CMOS analog switch hierarchy, where each of its four single-pole, single-throw channels can independently route a source terminal to one of two possible signal paths. This makes the device useful when a system must select among sensors, measurement channels, test points, or external circuit branches without introducing mechanical relays. Key features include four independent SPST switches, 1:1 signal routing, a maximum on-resistance of 45 Ω, low on-resistance matching between switches of 3 Ω maximum, and on-resistance flatness of 4 Ω maximum over the signal range. The device uses CMOS-compatible control inputs and supports improved conduction in either signal direction. These characteristics help preserve signal integrity in precision measurement, test, instrumentation, and communication circuits. The DG413 family uses an enhanced CMOS process to combine low power dissipation, high switching speed, and low on resistance. Because the switches provide equal electrical performance in both directions, a PCB designer can use consistent routing practices for paired signal paths. The manufacturer emphasizes improved matching and flatness because these characteristics directly influence gain error, channel-to-channel variation, and the accuracy of analog measurements passing through the switch. Typical uses include battery-powered instrumentation, automated test equipment, data-acquisition systems, communication routing, sample-and-hold front ends, and precision sensor interfaces. The DG413DY+ can support acquisition of multiple analog inputs where each channel requires independent selection while keeping control logic compatible with modern CMOS systems. Its four-channel structure reduces the number of separate switch packages needed in a typical measurement front end. When laying out the circuit, route each switched signal through a symmetric path and keep digital control traces away from sensitive analog nodes. Confirm the actual supply voltage, input-signal range, switch logic levels, and absolute maximum ratings in the manufacturer datasheet before connecting external circuitry. The 16-SOIC footprint also allows board updates where the four analog channels can replace discrete or multiplexed switching arrangements. This page combines the DG413DY+ electrical characteristics, pin-compatible alternatives, package information, and application guidance to support faster component selection and implementation. It also highlights the distinctions between resistance matching, resistance flatness, signal range, and channel count that matter when choosing an analog switch for precision routing.