بەرهەمەکان (720+)

LM2903VQPWR - Dual 36V Comparator | Texas Instruments
LM2903VQPWR

LM2903VQPWR - Dual 36V Comparator | Texas Instruments

Texas Instruments LM2903VQPWR is a dual differential comparator containing two independent voltage comparators, a 2 V to 36 V operating-voltage range, and open-collector outputs in an 8-pin TSSOP (PW) package. The device supports single-supply operation and dual-supply operation when the total supply span and voltage relationship meet its operating limits. A dual comparator is an analog integrated circuit that compares two input voltages and produces a digital-level output indicating which input is higher. As a comparator within the broader analog IC and semiconductor hierarchy, the LM2903VQPWR provides the conversion of small analog voltage differences into logic-compatible decisions. Its two independent channels can monitor two thresholds, or they can be combined for window comparison and other system-level functions. The principal features include two independent comparators, a wide 2 V to 36 V supply range, rail-to-rail input capability, open-collector outputs, and an operating temperature range of -40°C to +125°C. The open-collector outputs require an external pull-up resistor and allow several outputs to be connected for wired-AND behavior. This architecture is useful when driving open-drain logic, relay interfaces, or indicators with a compatible pull-up voltage. The LM2903 family is designed for general-purpose comparison rather than continuous analog amplification. Each channel compares an inverting input with a non-inverting input, while its output changes state according to the input relationship. Rail-to-rail input behavior allows the input voltages to approach the supply rails, although common-mode and output-state details should be checked against the manufacturer datasheet for the exact operating conditions. Typical uses include threshold detection, industrial sensor interfaces, overvoltage and undervoltage monitoring, control-system signal conditioning, and open-collector logic interfaces. The 8-pin TSSOP package supports compact surface-mount layouts, while the -40°C to +125°C temperature range makes the device suitable for industrial and automotive-style environments when the complete system requirements support that operating range. For PCB design, reserve the pull-up network required by the open-collector outputs and keep comparator input routing away from high-current switching paths. Account for input common-mode limits, output pull-up voltage, supply decoupling, and logic thresholds in the connected system. The manufacturer pin-description table should be used directly when assigning PCB tracks and confirming the numbering of the PW package. This product page consolidates the core electrical characteristics, replacement options, application guidance, and package-level design considerations into a practical selection reference. It also provides a parameter-by-parameter comparison that helps engineers distinguish standard, automotive, and lead-free orderable variants before committing to a PCB footprint.

RFQ پەیوەندی
LM2903VQPWRG4Q1 - 30V Dual Comparator | Texas Instruments
LM2903VQPWRG4Q1

LM2903VQPWRG4Q1 - 30V Dual Comparator | Texas Instruments

The Texas Instruments LM2903VQPWRG4Q1 is an automotive dual differential comparator with two independent open-collector channels, a 30 V maximum supply voltage, and an 8-pin TSSOP package. The LM2903VQPWRG4Q1 supports single-supply or dual-supply operation and is qualified to AEC-Q100 Grade 0 and Grade 1 for automotive electronics. A comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input. The differential comparator belongs to the broader comparator, analog IC, and semiconductor hierarchies. It is commonly used for threshold detection, overvoltage and undervoltage monitoring, sensor conditioning, and converting analog levels into digital logic signals. The device provides lower offset voltage, higher supply-voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance than earlier LMx93-family devices. Typical input offset voltage is no more than 7 mV at 25°C, supply current is 0.4 mA per comparator, and nominal response time is 1.3 microseconds. Its open-collector outputs allow wired logic, pull-up resistors, and level translation to the supply voltage used by the receiving logic. Each channel has independent noninverting and inverting inputs, so the two comparators can monitor separate signals or implement two thresholds. The common-emitter open-collector output sinks current from an external pull-up and naturally goes to a high-impedance state when the comparator is inactive. Because the output stage is not push-pull, output rise time depends on the pull-up resistor, total bus capacitance, and leakage current rather than only on internal drive strength. Typical uses include automotive battery monitoring, sensor threshold detection, industrial control inputs, overvoltage and undervoltage protection, and signal conditioning between analog sensors and digital controllers. Single-supply operation simplifies power architecture, while dual-supply operation allows inputs and output pull-ups to reference different voltage domains. The wide 30 V supply range also accommodates 12 V and 24 V automotive electrical environments when the absolute maximum ratings and transient requirements are respected. For PCB design, keep the comparator inputs and power-ground return paths compact, connect the exposed-decoupling route to a low-impedance ground plane, and place the output pull-up resistor near the driven logic input. Avoid routing sensitive input traces beside power outputs or long pull-up traces. Input protection may be required in external automotive connectors, and production designs should validate the complete system for conducted noise, ESD events, supply transients, and open-collector pull-up compatibility. This page combines exact ordering information, automotive qualification details, drop-in comparator choices, application-specific engineering guidance, and a parameter comparison to help engineers select and implement the LM2903VQPWRG4Q1 correctly.

RFQ پەیوەندی
LM2903XK - Dual Open-Drain Comparator | Runic Technology
LM2903XK

LM2903XK - Dual Open-Drain Comparator | Runic Technology

Runic Technology LM2903XK is a dual-channel, general-purpose voltage comparator with open-drain outputs, supplied in an 8-pin SOIC package. The device is intended for industrial control and consumer-electronics circuits that compare two input voltages and require a digital, low-side output for interfacing with pull-up-based logic systems. Its dual-channel architecture allows two independent threshold comparisons in one package. A voltage comparator is a semiconductor that evaluates the relationship between two voltages and changes its output state when one input crosses the other. The comparator category belongs to the broader signal-conditioning and interface-IC hierarchy, where an analog voltage decision is converted into a logic-compatible event. The LM2903XK open-drain output can support wired logic, system monitoring, threshold detection, and control functions when paired with an appropriate pull-up resistor. The LM2903XK provides two comparator channels, open-drain output structures, and an 8-SOIC package identified as SOIC-8 with a 0.154-inch, 3.90 mm width. PartGenie classifies the device for industrial-control and consumer-electronics applications. Its listed environmental-handling classification is MSL 3 for 168 hours, while its compliance records identify RoHS3 compliance and no REACH impact. Because the output is open drain, each channel can pull its output node to a defined logic-low state but cannot actively drive a logic-high state. A pull-up resistor or compatible pull-up network is therefore required. This arrangement provides useful flexibility because the output can be referenced to a supply selected by the system designer, while multiple open-drain outputs can share a bus when the electrical conditions and device limits permit. Typical uses include monitoring a power rail against a reference, detecting sensor thresholds, generating reset or fault signals, comparing two analog signals, and implementing simple control loops. The dual-channel format is especially useful when a system requires two related decisions, such as an upper-limit detector and a lower-limit detector, without using separate single-channel packages. The primary PCB considerations are pin orientation, input common-mode limits, output pull-up values, and the voltage and current ratings of the open-drain nodes. Designers should use the manufacturer datasheet pin-description table and electrical characteristics before finalizing input ranges, output sink-current limits, supply limits, and decoupling requirements. A local ground-reference arrangement is important for stable comparator behavior. This product page consolidates the LM2903XK function, package information, compliance records, verified source links, and application guidance. It also identifies confirmed package-related alternatives and clearly separates them from unverified or differently packaged options so that engineers can assess PCB compatibility before making a replacement decision.

RFQ پەیوەندی
LM293H - Dual Differential Comparator | Texas Instruments
LM293H

LM293H - Dual Differential Comparator | Texas Instruments

The Texas Instruments LM293H is a dual differential comparator, an analog comparator IC with two independent comparison channels, open-collector outputs, and a TO-99-8 metal can package. The verified product data identifies the device as a general-purpose, low-power comparator with low offset voltage, operating from single or dual supplies over a wide voltage range. The LM293H is suitable when two signals must be compared and the result must drive TTL, MOS, CMOS, or other digital logic through its open-collector output. A differential comparator is a semiconductor device that compares two input voltages and produces a logic-level indication of their relationship. The dual-channel architecture provides two independent comparators in one package, reducing component count in threshold detection, overvoltage indication, current sensing, and control systems. Its open-collector outputs require an external pull-up resistor when the output must settle to a valid high level. The LM293 family is associated with wide supply capability, single-supply operation, and compatibility with common logic families. The LM293H is identified in the verified distributor data as an 8-pin TO-99-8 device with two channels. The manufacturer family information describes the LM293 as an industrial-grade dual differential comparator. The verified search data specifically lists low power, low offset voltage, rail-to-rail input labeling, open-collector output, and a wide supply operating range. Detailed electrical limits, propagation-delay curves, input common-mode limits, output sink-current limits, and temperature limits must be confirmed in the manufacturer datasheet before final design release. Typical uses include battery-powered monitoring, industrial sensor interfaces, overvoltage detection, temperature threshold circuits, and dual-rail control logic. In a practical design, each comparator can monitor a signal against a reference voltage while the open-collector output drives a pull-up and the downstream logic input. Care is required when inputs approach supply rails, when output pull-up speed affects timing, or when unused comparator channels are left unconnected. This page combines verified manufacturer and distributor links, package identification, application guidance, and structured comparison information. It intentionally avoids filling unavailable electrical values with guesses; consult the current manufacturer datasheet for authoritative limits, ordering details, and lifecycle information.

RFQ پەیوەندی
LM339ADBR - 4-Channel 30V Open-Collector Comparator | Texas Instruments
LM339ADBR

LM339ADBR - 4-Channel 30V Open-Collector Comparator | Texas Instruments

Texas Instruments LM339ADBR is a four-channel differential voltage comparator operating from a single 2V to 30V supply, with an open-collector output stage and a 14-pin SSOP package. It provides a maximum rated supply voltage of 38V, an input offset voltage as low as 0.37mV, input bias current of 3.5nA, and supply current of 200µA per comparator. A quad differential comparator is an analog integrated circuit that compares two input voltages and changes its output state when their difference crosses a defined threshold. The LM339 belongs to the comparator hierarchy within analog ICs and broader semiconductor signal-conditioning systems. Its four independent channels can compare unrelated signals because the devices share only power and ground connections. The open-collector outputs support wired-AND operation, level translation, and direct connection to pull-up resistors. Low input offset voltage of 0.37mV supports accurate switching decisions near the comparison threshold, while 3.5nA input bias current reduces source-loading effects in high-impedance sensing circuits. A 2V minimum supply permits operation from low-voltage rails, and the 30V operating range supports higher-voltage industrial systems. The B-version family also supports maximum ratings up to 38V. Each channel provides independent comparison inputs, allowing one device to implement four threshold, sorting, window-detection, or fault-monitoring functions. The open-collector architecture is useful when several comparator outputs must share a bus, although an external pull-up resistor is required for normal logic-high operation. Quiescent current of 200µA per comparator supports low-power monitoring systems when the device is operated near light-load conditions. Typical uses include industrial sensor monitoring, battery threshold detection, power-supply sequencing, overvoltage and undervoltage protection, window comparators, and logic interfaces. The low offset and bias-current characteristics are particularly useful when the source impedance and input voltage accuracy are important. The 14-pin SSOP package also supports compact board layouts where a larger SOIC or DIP package would be unnecessary. For reliable operation, select pull-up resistors according to the required rise time and sink-current budget, keep input and output paths separated to prevent switching transients from affecting comparisons, and observe the absolute maximum supply rating of 38V. The open-collector stage does not actively drive a logic-high state, so every application must include an appropriate pull-up arrangement or relay interface. This product record combines the electrical characteristics, package details, sourcing information, drop-in family options, and practical circuit guidance needed to evaluate the LM339ADBR in new comparator designs.

RFQ پەیوەندی
LM339ADE4 - Quad Differential Comparator | Texas Instruments
LM339ADE4

LM339ADE4 - Quad Differential Comparator | Texas Instruments

Texas Instruments LM339ADE4 is a precision quad differential comparator containing four independent comparator channels, with a typical response time of 300 ns, a 2 V to 36 V supply range, and open-collector outputs in a 14-pin SOIC package. It supports single-supply or dual-supply operation and compares input signals across a common-mode range that includes ground. A differential comparator is an analog integrated circuit that evaluates two input voltages and changes its output state when the difference between them crosses a reference threshold. In the broader electronics hierarchy, the LM339 belongs to the comparator IC family, within linear integrated circuits and signal-conditioning systems. Its four channels allow one device to implement independent threshold detection, window comparison, zero-crossing detection, or level conversion without requiring four separate comparator packages. The principal features of the LM339ADE4 include four open-collector outputs, supply-voltage operation from 2 V to 36 V, and low supply-current drain of 0.8 mA typical. The output structure is compatible with TTL, MOS, and CMOS logic, making the device useful where a comparator must drive a pull-up resistor, relay driver, indicator, or digital logic input. Differential input voltage can reach ±38 V, while the common-mode input range includes ground. Internally, the LM339 uses four similar differential comparator sections operating from a common supply architecture. Because the outputs are open collector, each channel can sink logic-level current while remaining in a high-impedance state when inactive. An external pull-up resistor establishes the high output voltage. This architecture provides simple voltage translation and allows several open-collector outputs to share a bus when only one device is actively pulling the line low. Typical uses include industrial control and sensor interfaces, battery-powered monitoring, motor and actuator threshold detection, window comparators, overvoltage and undervoltage protection, and logic-level translation. The ability to operate from a single supply is particularly useful in portable systems because the input common-mode range includes ground. The 14-pin SOIC package also supports conventional surface-mount PCB assembly. Design the pull-up resistor for the required sink current, output rise time, bus capacitance, and available logic supply. Check input common-mode and absolute-maximum limits during startup because the input pins may briefly exceed the operating supply. Account for response delay when designing pulse-width or overvoltage systems; the typical 300 ns figure is a propagation-delay value rather than a guaranteed maximum. This product record combines the manufacturer’s device information with package, pinout, application, and drop-in replacement guidance. It supports faster design decisions by distinguishing the LM339A electrical architecture from B-version and alternate-family options, while emphasizing where open-collector pull-ups, supply range, and input operating limits require engineering review.

RFQ پەیوەندی
LM339AMX/NOPB - 4-Comparator 36V IC | Texas Instruments
LM339AMX/NOPB

LM339AMX/NOPB - 4-Comparator 36V IC | Texas Instruments

Texas Instruments LM339AMX/NOPB is a four-channel, general-purpose voltage comparator IC with open-collector outputs, a 2 V to 36 V supply range, and a 14-pin SOIC package. The device provides a 1.3 µs response time and low input offset voltage, making it suitable for level detection, low-level sensing, memory applications, and general industrial control circuits. A voltage comparator is an analog semiconductor that compares two input voltages and changes its output state when the differential input crosses a defined threshold. The LM339 family belongs to the comparator hierarchy within analog and mixed-signal integrated circuits. Each of its four channels can operate independently, while common power and ground connections simplify implementation across multiple sensing or control functions. The principal features of the LM339AMX/NOPB include four precision comparators, open-collector outputs, single-supply or dual-supply operation, and low power consumption. Its input offset voltage can be as low as 2 mV maximum for all four comparators. The open-collector architecture allows output transistors to be pulled up to a chosen logic voltage, enables wired-AND behavior, and permits use with CMOS, MOS, TTL, DTL, and ECL interfacing when suitable external pull-up circuitry is used. The LM339 architecture is designed for a broad supply range of 2 V to 36 V, or approximately ±1 V to ±18 V in dual-supply operation. A typical response time of 1.3 µs provides adequate speed for threshold detection, overvoltage monitoring, and simple control loops. Because each comparator is electrically independent, unused channels should be configured according to the manufacturer's input and output recommendations to prevent unstable behavior. Typical applications include industrial sensor interfaces, battery and power-supply monitoring, window and level comparators, control-system threshold detection, and low-level sensing. The wide supply range supports both compact low-voltage systems and higher-voltage industrial environments, while the 14-pin SOIC package supports conventional through-hole assembly and automated board assembly. A key design consideration is the open-collector output: every channel requires an external pull-up resistor unless the output is intentionally connected to a wired bus. Select the pull-up voltage to match the receiving logic family, and account for its contribution to supply current and switching speed. This page combines manufacturer specifications, package information, pin assignments, application guidance, and engineering-oriented comparisons to support component selection and PCB implementation.

RFQ پەیوەندی
LM339ANG4 - 4-Channel 30V Differential Comparator | Texas Instruments
LM339ANG4

LM339ANG4 - 4-Channel 30V Differential Comparator | Texas Instruments

Texas Instruments LM339ANG4 is a four-channel differential comparator integrated circuit with an open-collector output architecture, a 2 V to 30 V single-supply range, and a 14-pin through-hole DIP package. Each of its four independent comparator channels compares two input voltages and provides a logic-level indication of their relationship, making the device suitable for threshold detection, level translation, sensing, and industrial control functions. A comparator is an analog integrated circuit that converts the relationship between two voltages into a digital output state. The LM339 belongs to the comparator IC family, within the broader hierarchy of analog semiconductor and signal-conditioning devices. Unlike a general-purpose operational amplifier used primarily for closed-loop amplification, a comparator is optimized to determine whether one input is above or below another, commonly for sensing and switching applications. The four-channel architecture reduces the number of packages and PCB connections needed for multi-threshold systems. Key characteristics include a maximum input offset voltage of 3 mV at 30 V, maximum input bias current of 0.25 µA at 5 V, and typical output current capability of 20 mA. The open-collector outputs can sink current for driving pull-up networks and interfacing with TTL, MOS, and CMOS-compatible logic, although an external pull-up resistor is required. The device accepts a wide single-supply operating range of 2 V to 30 V and a dual-supply range of ±1 V to ±15 V. This voltage tolerance makes it useful in industrial, automotive-adjacent, instrumentation, and embedded systems where sensing nodes may exceed ordinary low-voltage logic rails. The A-version LM339ANG4 is identified in the manufacturer documentation as an active quad differential comparator in a 14-DIP package measuring 0.300 inch, or 7.62 mm, across the lead row. Typical applications include DC overvoltage and undervoltage detection, sensor threshold switching, window comparators, relay-control interfaces, battery monitoring, and four-channel process-signal conditioning. Because the outputs use open-collector transistors, pull-up resistors can be selected to match the voltage and current requirements of the following logic family. The shared supply architecture also simplifies dual-polarity sensing around ground. Designers should verify input common-mode limits, output pull-up values, and channel-to-channel behavior before implementation. Input protection, filtering, and hysteresis may be required when sensed signals contain noise or when the comparator output must remain stable around a switching threshold. The 14-pin DIP through-hole package also provides ample spacing for hand assembly, prototyping, and serviceable industrial electronics. This product page combines the manufacturer device information with practical application guidance, package-level design considerations, and a structured comparison of compatible quad comparator options for easier component selection and PCB planning.

RFQ پەیوەندی
LM339ANSRG4 - 4x Open-Collector Comparator | Texas Instruments
LM339ANSRG4

LM339ANSRG4 - 4x Open-Collector Comparator | Texas Instruments

Texas Instruments LM339ANSRG4 is a quad differential comparator containing four independent voltage comparators, an input voltage range of 2 V to 36 V, and open-collector outputs in a 14-pin SOIC package. The device can also operate from dual supplies of ±1 V to ±18 V, making it suitable for industrial and control circuits that compare signals above conventional logic levels. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input. The LM339 belongs to the comparator IC hierarchy, where it combines differential analog input handling with digital-compatible open-collector outputs. Unlike a comparator with a fixed push-pull output, the open-collector architecture allows multiple outputs to be wired together when suitable pull-up circuitry is provided. Each of the four comparator channels has independent inputs and output. Key operating characteristics include a maximum input offset voltage of 3 mV at 30 V, input bias current of 0.25 µA at 5 V, and typical output current of 20 mA. The wide supply range permits operation from a single 2 V to 36 V source or from dual rails spanning ±1 V to ±18 V. A nominal 800 µA supply-current drain supports low-power operation when the system does not require continuous high-current output sinking. The open-collector output stage is the core architectural feature. Each transistor output can pull a logic net low while an external resistor supplies the high state, allowing interface with TTL, CMOS, MOSFET, relay, or other open-collector peripherals. This arrangement also permits wired-AND behavior across several channels. The output transistor must never be allowed to float because no internal pull-up resistor is present in the output path. Typical uses include industrial threshold detection, sensor signal conditioning, battery monitoring, overvoltage detection, window comparators, oscillator and relaxation timing circuits, and control logic for relays or power stages. The broad supply range is particularly useful in 12 V or 24 V industrial systems where the comparator inputs can tolerate voltages above the logic supply level. Layout should keep input traces short, maintain a stable ground reference, and place pull-up resistors close to the output nets. Because open-collector outputs can switch relatively large currents, check the absolute-maximum output voltage and current limits before driving a load. A pull-up resistor that is too large produces slow rising edges, while an undersized resistor can exceed the output-current limit. This page organizes the electrical limits, pin mapping, drop-in alternatives, application guidance, and design trade-offs of the LM339ANSRG4. It also identifies the important distinction between the obsolete ordering code and currently documented alternatives before a PCB design is revised.

RFQ پەیوەندی
LM339APWR - Quad Differential Comparator | Texas Instruments
LM339APWR

LM339APWR - Quad Differential Comparator | Texas Instruments

The Texas Instruments LM339APWR is a quad differential comparator containing four independent open-collector comparator channels in a 14-pin TSSOP package. It supports single-supply or split-supply operation, accepts input common-mode voltages that include ground, and provides open-collector outputs compatible with TTL, MOS, and CMOS logic. Key ratings include a maximum rated supply of 38 V, differential input voltage of ±38 V, input offset voltage as low as 0.37 mV, input bias current of 3.5 nA, and response time of 1 µs. A comparator is an analog-to-digital decision element rather than an amplifier: it evaluates a voltage at its non-inverting input relative to its inverting input and changes its output state when the difference crosses a defined threshold. Within the power-management and signal-conditioning hierarchy, the LM339A belongs to the comparator family of integrated circuits. Its four channels can perform independent threshold decisions, while its open-collector outputs allow wired logic, pull-up-controlled buses, or interface to subsequent digital stages. The principal features of the LM339APWR include four independent channels, low input offset voltage of 0.37 mV, low input bias current of 3.5 nA, and low supply-current consumption of 200 µA per comparator. Its common-mode input range includes ground, which is important for single-supply sensing systems. The 1 µs response time supports practical threshold and protection functions, while the 38 V maximum rating provides additional operating margin in industrial systems. Each comparator uses an open-collector output structure, so the output includes a transistor capable of sinking current rather than actively driving a rail-to-rail logic voltage. A pull-up resistor is therefore required to establish the high output state. This architecture is useful when multiple devices must share a wired signal, but it also introduces rise-time behavior governed by the pull-up resistance and total bus capacitance. Typical applications include industrial sensor conditioning, battery-powered monitoring, overvoltage and undervoltage detection, window-comparison circuits, and control systems with open-collector alarm outputs. The common-mode range including ground makes the device suitable for detecting small signals near 0 V, while the multi-channel configuration allows one package to implement several related thresholds. Designers should account for input and output behavior near ground, select an appropriate pull-up resistor, and verify operation across supply tolerance, temperature, input overvoltage, and output leakage conditions. Review the Texas Instruments datasheet pin-description table before assigning PCB signals, especially because the exposed supply and output arrangement is specific to the quad TSSOP implementation. This product page combines the manufacturer’s electrical and ordering information with practical design guidance, same-footprint replacement analysis, and application-oriented context. It is intended to help engineers identify whether the LM339APWR’s four-channel, open-collector architecture fits a comparator design before beginning PCB implementation or production sourcing.

RFQ پەیوەندی
LM339DRE4 - Quad Open-Collector Comparator | Texas Instruments
LM339DRE4

LM339DRE4 - Quad Open-Collector Comparator | Texas Instruments

Texas Instruments LM339DRE4 is a quad differential analog comparator with four open-collector outputs, a 2 V to 36 V supply range, and a low input offset voltage of 0.37 mV. Each comparator can operate from a single supply or from dual supplies, making the device suitable for threshold detection, level sensing, and industrial control systems. The component is packaged in a 14-pin SOIC surface-mount package. An analog comparator is an integrated circuit that compares two voltage signals and produces a logic-level indication of their relative relationship. Within the broader semiconductor hierarchy, the LM339 belongs to the comparator IC and linear analog IC families. Its four independent channels reduce component count when a system requires multiple sensing, window-detection, or control decisions. Important electrical characteristics include low input bias current of 3.5 nA, low supply current of 200 µA per comparator, a fast response time, and an open-collector output architecture. The open-collector outputs permit wired-AND operation and require an external pull-up resistor. This architecture also gives the designer control over output rise time and logic voltage compatibility. The LM339 supports single-supply operation from 2 V to 36 V. Under dual-supply conditions, the common-mode input range depends on the supply arrangement. The manufacturer datasheet states that neither input should normally be driven more than 0.3 V below the negative supply, while the upper common-mode limit is typically VCC minus 1.5 V. Proper input-range design is therefore essential in battery-powered and mixed-polarity systems. Typical applications include industrial sensor interfaces, battery monitoring, window comparators, overvoltage detection, motor-control logic, and general digital threshold conversion. The quad-channel format is particularly useful when four independent measurements or control points must be handled in one package. Its low input bias current also reduces errors when connected to high-impedance sensing networks. Designers should pull each output up to a suitable supply through an external resistor and account for the open collector's off-state leakage when analyzing bus behavior. PCB placement should keep sensitive input traces away from switching nodes and the pull-up network. Input filtering should use resistors and capacitors selected for the required response time rather than excessively slowing the comparator. This product page combines manufacturer specifications, application guidance, pin-level information, and practical design notes to support component selection and PCB implementation. It also provides structured comparison data for evaluating pin-compatible LM339-family and related comparator options.

RFQ پەیوەندی
LM339LVRTER - Quad 5.5V Comparator | Texas Instruments
LM339LVRTER

LM339LVRTER - Quad 5.5V Comparator | Texas Instruments

The Texas Instruments LM339LVRTER is a four-channel voltage comparator designed for low-voltage operation from 1.65 V to 5.5 V. Each channel provides rail-to-rail input capability, an open-collector output, and a typical propagation delay of 600 ns, with a nominal 1 µs device-level delay class. The IC is packaged in a 16-WQFN 3 x 3 mm RTE package and is rated for operation from -40 °C to 125 °C. A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input, or vice versa. Comparators belong to the broader integrated-circuit hierarchy and are used to implement threshold detection, level translation, signal conditioning, overvoltage detection, and autonomous system decisions. The LM339LV belongs to the low-voltage comparator family and is intended to replace standard LM339-family devices in low-voltage systems where rail-to-rail input operation improves usable signal range. Four independent channels allow one device to implement several comparison functions without using separate single-channel packages. The 1.65 V to 5.5 V supply range supports low-voltage portable, embedded, industrial-control, and mixed-signal systems. Rail-to-rail input behavior permits sensing signals near either supply rail, while the open-collector outputs provide flexible interface options when paired with suitable pull-up resistors. Maximum quiescent current is 35 µA per channel. The open-collector architecture requires an external pull-up resistor on each output node. This arrangement allows wired-open logic, level translation to another supply voltage, and direct interfacing with open-drain-compatible devices. Because the output transistor can sink current but cannot actively drive a supply rail, output rise time depends on the pull-up resistance, total bus capacitance, and leakage from connected devices. System designers should not substitute a push-pull output without rechecking downstream logic compatibility. Typical uses include battery-powered threshold detection, sensor signal conditioning, overvoltage and undervoltage monitoring, industrial control logic, and four-channel level translation. The quad organization is especially useful when a system compares several rails or sensor thresholds against independent references. Input offset, common-mode behavior, response delay, and output leakage should be considered when setting switching thresholds or designing hysteresis. For reliable operation, place the pull-up resistor close to the output node and route comparator inputs away from switching-node and high-current paths. The small WQFN package benefits from careful assembly practices and adequate PCB copper, although exposed-pad thermal requirements depend on ambient temperature and dissipation. Confirm the manufacturer pin description table before assigning signals because the public result excerpts do not reproduce every terminal name. This product page consolidates the key electrical ratings, package information, application guidance, and replacement considerations for LM339LVRTER. It also distinguishes true drop-in options from comparators that differ in channel count, package, output architecture, or supply rating, helping engineers make a board-level decision without assuming that every similarly named LM339 device is interchangeable.

RFQ پەیوەندی
LM339N/NOPB - 4-Channel Low-Offset Comparator | Texas Instruments
LM339N/NOPB

LM339N/NOPB - 4-Channel Low-Offset Comparator | Texas Instruments

The Texas Instruments LM339N/NOPB is a low-power, low-offset quad voltage comparator containing four independent comparator channels, an input offset voltage as low as 2 mV maximum, and open-collector outputs in a 14-pin DIP package. It operates from a single supply over a wide voltage range and also supports split-supply operation, making it suitable for industrial control, sensor conditioning, and threshold-detection circuits. A voltage comparator is an analog integrated circuit that compares two input voltages and produces a digital-level indication of their relationship. The LM339 family belongs to the comparator IC hierarchy, combining analog signal evaluation with logic-compatible output signaling. Its four independent channels allow one package to monitor multiple thresholds, detect window crossings, or perform four independent zero-crossing comparisons. Key features include four independent comparator sections, a maximum offset voltage of 2 mV for all four comparators, and open-collector outputs that can sink output current for wired logic or pulled-up systems. The low-power architecture supports single-supply operation, while split power supplies are also possible. The 14-pin through-hole DIP package provides generous spacing and straightforward prototyping compared with a surface-mount footprint. The open-collector output stage is the defining electrical feature of this comparator family. Each output can pull a logic rail low, but it does not actively source current. A pull-up resistor is therefore required when the output must reach a valid high level. This arrangement permits level translation, wired-AND behavior, and flexible output rise-time control, but system designers must account for pull-up resistance, load capacitance, output rise time, and propagation delay. Typical applications include industrial sensor thresholds, battery and power-supply monitoring, overvoltage and undervoltage detection, zero-crossing detection, window comparators, control-system interlocks, and general-purpose logic interfaces. Because all four channels are independent, the device can reduce component count in multi-channel monitoring designs where board space and through-hole assembly are priorities. For reliable operation, connect an output pull-up resistor to the voltage used by the receiving logic, keep input and output traces away from high-current switching paths, and observe the device's supply-voltage and input-common-mode limits. Decoupling near the supply pins helps reduce local noise, while the open-collector outputs should not be used as push-pull logic outputs without the appropriate pull-up network. This page combines the LM339N/NOPB technical description, package information, comparison criteria, drop-in alternatives, and practical circuit-design guidance to help engineers evaluate the part for threshold, monitoring, and signal-conditioning applications.

RFQ پەیوەندی
LM339PWRE4 - Quad 36V Differential Comparator | Texas Instruments
LM339PWRE4

LM339PWRE4 - Quad 36V Differential Comparator | Texas Instruments

Texas Instruments LM339PWRE4 is a quad differential comparator with an open-collector output, operating from a single 2 V to 36 V supply or from dual supplies, and packaged in a 14-pin TSSOP. Each of the four channels provides independent comparison of two input voltages, making the device suitable for threshold detection, level translation, and analog signal conditioning. A comparator is a differential analog input device that changes its output state when one input becomes higher than the other. The LM339 belongs to the comparator hierarchy within analog integrated circuits and combines four sensing channels in one package. Its open-collector outputs require an external pull-up resistor, allowing the output voltage, rise time, and interface level to be selected by the surrounding circuit. The LM339 family is designed for single-supply or dual-supply operation. The manufacturer identifies a differential input range equal to the maximum-rated supply voltage of plus or minus 38 V, while the common-mode input range includes ground. These characteristics allow the device to monitor signals referenced to a negative rail or systems powered from widely separated supply rails. According to the Texas Instruments product page, the outputs are compatible with TTL, MOS, and CMOS logic. The family also uses low supply current that remains largely independent of supply voltage, making it practical for battery-powered monitoring circuits where every microampere contributes to operating time. The comparison function is particularly useful when a system requires a digital indication of an analog threshold without converting the entire measurement chain to a digital signal. Typical uses include overvoltage and undervoltage detection, sensor threshold switching, window comparators, relay or solenoid drivers, and battery monitoring. Four independent channels can reduce component count in a multi-rail supervisor, while the open-collector architecture permits wired logic, pulled-up alarm outputs, and interfacing to multiple destinations. When laying out a circuit, place input and pull-up components close to the device and keep sensitive comparison nodes away from switching-current paths. Check the input common-mode range, output pull-up voltage, supply sequencing, and channel response time before using the comparator with slow-moving or noisy signals. This product page combines manufacturer specifications, package and lifecycle information, sourcing guidance, and practical comparator-design guidance to support faster component selection, PCB implementation, and replacement planning.

RFQ پەیوەندی
LM339QT - Low-Power Quad Open-Collector Comparator | STMicroelectronics
LM339QT

LM339QT - Low-Power Quad Open-Collector Comparator | STMicroelectronics

The STMicroelectronics LM339QT is a low-power, general-purpose quad voltage comparator containing four independent comparator channels with open-collector outputs in a 16-QFN package measuring 3 x 3 mm. It operates from a single positive supply, supports input voltages ranging from 0 V to VCC − 1.5 V, and provides a typical supply current of 1.1 mA for the complete four-channel device. A voltage comparator is a semiconductor device that compares two input voltages and produces a logic-level output indicating which input is higher. The LM339QT belongs to the comparator hierarchy within analog and mixed-signal integrated circuits. Its four open-collector channels can be used independently, allowing several threshold, sensing, window-detection, or protection functions to be implemented in one compact package. Open-collector outputs also provide flexibility for wired logic, level shifting, and interface designs when an external pull-up is used. Key characteristics include low power consumption, an input offset voltage specified as low as 2 mV maximum for the related LM339A, LM239A, and LM139A precision versions, and input bias current listed as 25 nA in the product listing. The device is compatible with CMOS, DTL, ECL, MOS, open-collector, and TTL logic environments. Each channel provides substantial flexibility in voltage comparison because the inputs can operate across the supply range while the output stage operates from the positive supply. The open-collector output architecture is a central technical feature. Unlike a totem-pole output, an open-collector transistor can pull the output low but cannot actively drive it high. Designers therefore add a pull-up resistor to establish the high state. Multiple comparator outputs can share a pull-up when the application requires wired-AND behavior. Output speed is not its principal strength; instead, the LM339QT emphasizes low power, wide input common-mode capability, flexible logic interfacing, and four independent channels in one small package. Typical uses include monitoring multiple power rails, detecting overvoltage or undervoltage conditions, comparing sensor outputs with adjustable references, implementing window comparators, generating system-reset signals, and translating between different logic voltage domains. The compact 16-QFN footprint is useful in space-constrained industrial, consumer, and embedded-control designs where four comparison functions are required without allocating separate components. The primary design consideration is the open-collector output. Select an external pull-up resistor to suit the required speed, current, and logic level, and place it close enough to the relevant output to limit rise time and susceptibility to noise. Input filtering may also be necessary when the comparator handles slow or high-impedance signals. Verify absolute maximum voltage, common-mode limits, output-current limits, and timing requirements in the manufacturer datasheet for the final operating environment. This product page combines the exact LM339QT package and headline electrical characteristics with practical interface guidance, sourcing guidance, and a focused comparison of technically relevant alternatives. It is intended to help engineers identify whether the four-channel, low-power, open-collector architecture matches the required voltage sensing and logic interface before committing to a PCB layout.

RFQ پەیوەندی
LM393ADRG4 - Dual Open-Collector Comparator | Texas Instruments
LM393ADRG4

LM393ADRG4 - Dual Open-Collector Comparator | Texas Instruments

The Texas Instruments LM393ADRG4 is a dual differential comparator containing two independent general-purpose comparator channels, a 2 mV input offset voltage, a 300 ns response time, and a 2 V to 36 V supply range in an 8-pin SOIC (D) package. Each channel supports single-supply or dual-supply operation, and its open-collector output architecture is intended for wired logic, alarm, threshold, and industrial control circuits. A comparator is an analog integrated circuit that evaluates one voltage against another and changes its output state when the difference crosses a defined threshold. The LM393 family belongs to the broader hierarchy of differential comparator, analog comparator, signal-conditioning IC, and semiconductor categories. Unlike an operational amplifier used primarily for closed-loop amplification, a comparator is optimized for fast, decisive digital signaling and commonly interfaces analog sensing circuits with logic-level systems. Key features include two independent channels, a wide 2 V to 36 V operating range, open-collector outputs, and a 2 mV offset specification that helps distinguish small differential signals. The open-collector architecture permits the output to be pulled up to a suitable logic voltage, adds output-stage flexibility, and can support wired-AND behavior when multiple comparator outputs share a pull-up resistor. The listed response time of 300 ns suits applications that require a defined switching transition without using a very high-speed logic device. The LM393ADRG4 is identified as an industrial-grade precision dual differential comparator. Its SOIC package provides a practical surface-mount footprint for PCB assembly, while the broad supply range accommodates 5 V, 12 V, 15 V, and 24 V system rails when component voltage ratings are considered. Because the outputs are open collectors, every application must include an appropriate pull-up resistor or other pull-up arrangement to obtain a valid high output level. Typical applications include overvoltage and undervoltage monitoring, sensor threshold detection, industrial control interfaces, motor or actuator protection, window-comparison functions, and conversion of analog sensor conditions into logic-compatible events. The two independent channels can monitor separate thresholds or operate as complementary comparators. Designers should also account for input common-mode limits, output pull-up voltage, supply decoupling, and any pull-up current when fan-out or fault conditions are important. For reliable layouts, place the bypass capacitor close to the supply and ground pins, keep comparator input traces short, and avoid routing them beside high-current switching paths. A pull-up resistor near the output improves rise time, but its value must balance speed, power, and the current sourced by the open-collector transistor. The input network should use stable reference sources and include protection when external wiring exposes the pins to transients. This page combines the manufacturer product identity, exact orderable package information, structured technical specifications, supported use cases, and drop-in replacement analysis. It is designed to help engineers confirm electrical suitability, package compatibility, and application fit before integrating the LM393ADRG4 into a new or existing PCB design.

RFQ پەیوەندی
LM393BIDGKR - Dual 38V Open-Collector Comparator | Texas Instruments
LM393BIDGKR

LM393BIDGKR - Dual 38V Open-Collector Comparator | Texas Instruments

Texas Instruments LM393BIDGKR is a dual commercial-grade differential comparator with open-collector outputs, a maximum rating of 38 V, low input offset voltage of 0.37 mV, and input bias current of 3.5 nA per comparator. It operates from a single supply and is packaged in an 8-pin VSSOP (DGK) surface-mount package. The two independent comparators support TTL, MOS, and CMOS-compatible output interfacing. A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM393B belongs to the dual-comparator hierarchy, combining two differential comparator channels in one integrated circuit. It is commonly used in the wider category of signal-conditioning and threshold-detection ICs, where a sensed voltage is compared against a reference or control signal. Key characteristics include a low supply current of 200 uA per comparator, a response time of 1 us, and a 2 kV human-body-model ESD rating. The common-mode input range includes ground, while the differential input range equals the maximum-rated supply voltage of 38 V. These features support robust sensing in industrial, communication, instrumentation, and embedded systems where the input may exceed conventional logic levels. The B-version architecture retains the familiar LM393 dual-open-collector interface while improving offset voltage, supply-current consumption, input bias current, propagation delay, and ESD ruggedness. Dedicated input clamps strengthen the inputs against electrostatic discharge. Each output can sink logic-level current while remaining in a high-impedance state when inactive, allowing multiple open-collector nodes to share a pull-up network when the electrical design permits it. Typical uses include overvoltage and undervoltage detection, window comparators, temperature-threshold circuits, sensor signal conditioning, relay or solenoid activation, and battery-powered monitoring. The low 200 uA per-comparator supply demand is particularly useful in systems where the comparator must remain active continuously without dominating the standby power budget. Design with the open-collector output in mind: every output requires a pull-up resistor to the appropriate logic supply. Place input, output, and decoupling connections to minimize parasitic pickup, and account for input offset and bias currents when working near the switching threshold. Keep the common-mode and differential inputs within their specified operating limits. This product page combines the LM393BIDGKR electrical characteristics, package and pin assignment, same-package alternatives, and practical application guidance. It supports faster engineering decisions by connecting the comparator’s offset, bias current, response time, ESD rating, and supply capability directly to common circuit-design requirements.

RFQ پەیوەندی
LM393PSRG4 - Dual Open-Collector Comparator | TI
LM393PSRG4

LM393PSRG4 - Dual Open-Collector Comparator | TI

Texas Instruments LM393PSRG4 is a dual differential comparator with two independent channels, open-collector outputs, and an 8-pin SOIC package. It operates from a single supply or dual supplies, with verified product information identifying a 2 V to 36 V single-supply range and ±1 V to ±18 V dual-supply range. The LM393 family provides rail-to-rail input operation and output compatibility with TTL, MOS, and CMOS logic, making it useful for threshold detection and analog-to-digital conversion stages. A comparator is an interface IC that compares two input voltages and changes its output state when the non-inverting input rises above the inverting input. The LM393 family places two independent comparator channels in one package. Its differential architecture is useful in sensing circuits, where a small signal around a reference voltage determines whether a downstream logic device receives a high or low state. Open-collector outputs also allow the output stage to be pulled up to the voltage required by the receiving logic. The principal benefits of the LM393PSRG4 are its wide supply-voltage range, low supply-current drain of 0.4 mA typical per comparator, and output compatibility with multiple logic families. The common-mode input range includes ground, which simplifies single-supply sensing when signals remain near the lower rail. Two channels can be used independently or together to create window, zero-crossing, or saturation-detection functions. The device is specified for general-purpose signal comparison rather than high-speed line sensing. A listed characterization identifies a 1.3 µs response-time class for this device family, while the B-version devices provide improved specifications for applications where tighter electrical performance is useful. Because each output is open collector, an external pull-up resistor is required unless the output is used in a wired-AND configuration. Output-current and pull-up limits must be checked against the manufacturer datasheet for the chosen operating condition. Typical uses include industrial sensor thresholds, battery monitoring, window comparators, relay or LED drive, oscillator and timer circuits, and conversion of an analog measurement into a digital logic event. The two channels make the device especially useful when a board needs two independent comparison points without using separate single-comparator packages. PCB implementation should preserve short comparator-input paths and provide a stable return for both channels. Keep sensitive reference and signal traces away from switching nodes and output pull-up networks. Select the external pull-up value to balance rise time, power dissipation, and the sink-current rating of the open-collector stage. Validate input and output behavior across temperature and supply tolerances before using the comparator close to its supply or common-mode limits. This page combines the verified device identity, package information, family-level operating characteristics, cross-reference candidates, application guidance, and design considerations into one engineering-focused resource. Use the manufacturer datasheet and pin-description table for final footprint, input limits, output-current limits, and ordering details.

RFQ پەیوەندی
LM393PWRG4 - Dual Open-Collector Comparator | Texas Instruments
LM393PWRG4

LM393PWRG4 - Dual Open-Collector Comparator | Texas Instruments

The Texas Instruments LM393PWRG4 is a dual differential comparator IC containing two independent general-purpose comparators in an 8-pin TSSOP package. The device supports single-supply or dual-supply operation, uses open-collector outputs for flexible level translation, and is suitable for systems requiring two independent threshold or sensing channels. According to the manufacturer product information, the LM393 family operates over a wide supply-voltage range, with operation from dual supplies possible when the total supply difference is between 2 V and 36 V. The two comparators have common-mode input voltage range including ground, while the differential input voltage range can equal the maximum-rated supply voltage. The open-collector output stage is the key feature of the LM393PWRG4. Each output can sink current when the comparator condition is met, but it requires an external pull-up resistor to establish a high voltage. This architecture works with TTL, MOS, and CMOS logic families and allows the output level to be selected by the system designer. The two channels are electrically independent, so each comparator can monitor a different signal, threshold, or protection condition within the same package. Typical electrical characteristics include low input offset voltage, low input bias current, and supply-current drain that is independent of supply voltage. The verified manufacturer listing identifies the part as a standard general-purpose comparator with rail-to-rail input capability and open-collector outputs. The open-collector topology also enables wired-AND behavior when multiple comparator outputs are connected together, provided each output has an appropriate pull-up and the resulting current budget is respected. Common applications include sensor-interface thresholding, battery and power-supply monitoring, window comparator circuits, overvoltage and undervoltage protection, temperature-control systems, and logic-level translation. Because the outputs are open collector, a design can select the pull-up voltage independently from the comparator supply voltage, which is useful when interfacing to a higher-voltage logic domain. The comparator inputs should remain within the specified common-mode range, and the unused channel inputs must be connected appropriately rather than left floating. When designing around the LM393PWRG4, start by assigning each channel to a sensing function and defining the pull-up voltage and sink-current requirement. Place the pull-up resistors close to the output pins, maintain adequate copper and thermal margin around the TSSOP, and verify that the input bias currents do not disturb high-impedance sensor nodes. This page combines manufacturer characteristics, package information, application guidance, drop-in alternatives, and design notes for faster component selection.

RFQ پەیوەندی
LM529CH - Dual Differential Comparator | Texas Instruments
LM529CH

LM529CH - Dual Differential Comparator | Texas Instruments

Texas Instruments LM529CH is a dual high-speed differential comparator in a TO-100-10 metal-can package. The device contains two comparator elements, supports TTL output, and is specified for commercial-temperature operation from 0°C to 70°C. Its typical output current is 55 mA at a 5 V supply, while the maximum average bias current is 30 µA. The round, 10-terminal through-hole package preserves the pin arrangement and mechanical interface used by older high-speed differential-comparator designs. A differential comparator is an analog integrated circuit that compares two input voltages and produces a logic output indicating which input is higher. By presenting two independent differential comparator channels in one package, the LM529CH supports compact designs that require two comparisons within one device. Its high-speed differential-comparator positioning makes it relevant to legacy signal-conditioning, timing, and pulse-processing systems where a discrete implementation would consume more board area. The principal device characteristics include TTL-compatible output behavior, a typical output current of 55 mA at 5 V, and a maximum average bias-current specification of 30 µA. The two-element configuration provides useful economy in circuits requiring paired comparisons. Because the LM529CH is a commercial-temperature component, its specified operating range of 0°C to 70°C is suitable for room-temperature commercial equipment rather than industrial-temperature environments extending beyond 70°C. The LM529CH belongs to the comparator hierarchy within analog integrated circuits: comparator, differential comparator, analog comparator, and integrated circuit. Its differential structure means the decision depends on the relationship between two sensed voltages rather than a single input referenced only to ground. The TTL output provides a bridge to digital logic, allowing a comparison result to influence counters, flip-flops, control logic, or other digital stages when voltage-level and timing requirements are satisfied. Typical uses include legacy pulse-width and timing circuits, zero-cross or threshold detection, window-comparison functions using both comparator channels, signal conditioning between analog sensors and TTL logic, and maintenance or modernization of equipment originally designed around a TO-100-10 comparator. In a window detector, the two channels can establish upper and lower thresholds, while a single channel can handle a simpler threshold decision. The original circuit must still be checked for output polarity, logic levels, timing margins, and unused-channel treatment. The most important design consideration is preserving the legacy package and pin functions during replacement or board reuse. The TO-100-10 metal-can outline is not interchangeable with common SOIC or MSOP packages, so a modern comparator may require a PCB redesign. Confirm the device drawing and connection details in the Texas Instruments datasheet before fabrication, and ensure every unused input is biased to prevent an indeterminate output. This product page consolidates the confirmed package, temperature, output, and electrical information for the LM529CH and adds practical selection and application guidance. It also distinguishes confirmed drop-in alternatives from generic functional substitutes, helping engineers assess whether a proposed replacement truly preserves the TO-100-10 footprint and original circuit behavior.

RFQ پەیوەندی
LM529CN - High-Speed Differential Comparator | Texas Instruments
LM529CN

LM529CN - High-Speed Differential Comparator | Texas Instruments

The Texas Instruments LM529CN is a high-speed differential comparator designed for TTL-compatible signal comparison in a 14-pin PDIP package. It is specified for a 5 V power supply, operates across a 0 °C to 70 °C temperature range, and provides differential input comparison with a propagation-delay variation of only 3 ns for overdrive conditions from 5 mV to 500 mV. The device is identified as a differential TTL comparator in distributor product listings. A high-speed differential comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relative relationship. In the broader signal-chain hierarchy, the LM529CN belongs to the comparator class within interface and signal-conditioning ICs. Its differential inputs are useful when a system must make a fast decision based on the difference between two changing voltages rather than a single voltage referenced to ground. The principal application feature is the LM529CN's controlled delay behavior across a broad input-overdrive range. The stated 3 ns variation for 5 mV to 500 mV overdrive indicates that output timing is relatively consistent even when the input signal exceeds the comparator's switching threshold by a substantial amount. This makes the part relevant to pulse-width detection, threshold crossing, waveform conversion, timing control, and digital-interface conditioning where predictable response time is valuable. The LM529CN uses a differential comparator architecture and is specified for TTL output compatibility. In a practical circuit, the two input nodes should be connected to the signals being compared, while the output can drive a downstream TTL input through appropriate routing and termination. Power-supply decoupling should be placed close to the device, and unused inputs should be held at a defined potential rather than left floating. Because the device is a legacy-style 14-pin PDIP, its through-hole package can also simplify prototype construction and rework. Typical uses include pulse-width measurement, zero-cross or level detection, industrial control logic, communications signal conditioning, and timing circuits. The 5 V supply requirement makes the LM529CN especially suitable for systems that already use TTL logic rails. Care should be taken to maintain valid input common-mode and output-drive conditions, observe the specified supply voltage, and account for the device's operating-temperature range during system qualification. This product page combines the Texas Instruments comparator identity, package information, operating limits, cross-reference candidates, practical design notes, and application guidance to support faster component selection and PCB planning.

RFQ پەیوەندی
LMV761MF/NOPB - 120ns Precision Comparator | Texas Instruments
LMV761MF/NOPB

LMV761MF/NOPB - 120ns Precision Comparator | Texas Instruments

The Texas Instruments LMV761MF/NOPB is a single, low-voltage precision comparator with a 120 ns response time, push-pull output, and shutdown capability. It operates from a 2.7 V to 5 V supply and is packaged in a compact 6-pin SOT-23 package. The device is intended for precision signal conditioning, threshold detection, and low-noise analog systems where fast decision-making and low supply current are important. A comparator is an analog integrated circuit that compares two input voltages and changes its output state when the differential input crosses a defined threshold. Unlike an operational amplifier, a comparator is optimized for saturated digital-style output states rather than linear amplification. The LMV761 belongs to the broader semiconductor hierarchy of analog ICs, comparator circuits, and low-voltage precision signal-conditioning components. The LMV761MF/NOPB provides a single comparator channel with rail-to-rail input capability, push-pull output, and a shutdown pin. Its 120 ns propagation delay supports fast decision paths, while its low supply current makes it suitable for portable and low-power equipment. The push-pull output avoids the external pull-up resistor normally required by open-collector comparators, simplifying PCB layout and reducing system component count. This comparator is particularly useful when a system must convert an analog measurement into a logic-level decision without adding substantial propagation delay. Its 2.7 V minimum supply voltage supports low-voltage digital and embedded systems, while operation up to 5 V provides compatibility with conventional low-voltage rails. The SOT-23-6 package supports compact placement, although designers should account for the small thermal footprint and exposed pad limitations of the package family. Typical applications include sensor threshold detection, battery and power-supply monitoring, signal crossing detection, window-comparison circuits, industrial control logic, portable instrumentation, and low-voltage embedded systems. The shutdown function can reduce supply current when the comparator is not needed, helping conserve power in always-on equipment. For reliable operation, connect the supply and ground pins according to the manufacturer datasheet, place bypass capacitance close to the device, and treat unused input pins carefully. Input common-mode range, output drive capability, and shutdown logic should be verified against the system requirements before layout release. This page summarizes verified manufacturer and distributor information alongside practical selection guidance, drop-in alternatives, and design considerations not consolidated in a single source.

RFQ پەیوەندی
LSF0102-Q1 - 2-Ch Auto Bidirectional Level Translator | TI
LSF0102-Q1

LSF0102-Q1 - 2-Ch Auto Bidirectional Level Translator | TI

The Texas Instruments LSF0102-Q1 is an automotive-qualified, 2-channel auto bidirectional multi-voltage level translator for open-drain and push-pull applications, packaged in an 8-pin VSSOP (DCU). It operates from 0.95 V to 5.5 V on Vref_A and 1.8 V to 5.5 V on Vref_B, enabling bidirectional translation between 0.95 V and 5.5 V without a direction pin. Data inputs are 5-V tolerant. A voltage level translator is a logic IC that converts signal voltage levels between circuits operating at different supply rails, sitting within the broader hierarchy of voltage translators -> logic ICs -> interface semiconductors. The LSF family uses a pass-gate (transmission-gate) architecture with reference rails, distinguishing it from powered translator families such as TXS/TXB that use MOSFET output stages. Key features include up to 100 MHz up translation and greater than 100 MHz down translation with capacitive loads of 30 pF or less; at a 50 pF load the device supports up to 40 MHz in both directions. This bandwidth covers standard automotive interfaces such as I2C, SPI, GPIO, SDIO, UART, and MDIO. AEC-Q100 qualification makes it suitable for automotive environments. The auto-direction architecture requires no direction-control pin, reducing MCU GPIO overhead and eliminating direction-timing errors. Because the LSF core is a passive pass-gate structure, external pull-up resistors set logic levels on open-drain buses; for push-pull signals, the reference rails Vref_A and Vref_B define the translated levels directly. Typical applications include automotive infotainment I2C buses between 1.8 V SoCs and 3.3 V peripherals, SPI connections between low-voltage MCUs and 5 V sensors, and SDIO/GPIO interfaces in body electronics and cluster modules. Design consideration: because the LSF topology needs external pull-up resistors on open-drain nets, size them against total bus capacitance and target rise time; keep capacitive loading at or below 30 pF to exploit the full 100 MHz translation rate.

RFQ پەیوەندی
LSF0102DDFR - 2-Ch 100Mbps Level Translator | TI
LSF0102DDFR

LSF0102DDFR - 2-Ch 100Mbps Level Translator | TI

The Texas Instruments LSF0102DDFR is a dual-channel auto-bidirectional multi-voltage level translator supporting both open-drain and push-pull applications. Housed in an 8-pin TSOT-23-8 (DDF) package, it translates signals between voltage domains from 0.95V up to 5.5V at data rates up to 100 Mbps without requiring a direction control pin. A level translator, or voltage level shifter, is a logic IC that enables digital signals to safely cross between circuits operating at different supply voltages, such as 1.8V, 3.3V, and 5V domains. Within the hierarchy of logic ICs, translators sit alongside buffers and bus switches in the signal-interface layer of a system, ensuring reliable communication in mixed-voltage designs. Key features include fully automatic bidirectional translation with no direction pin, support for open-drain buses (I2C, SMBus) and push-pull interfaces (SPI, UART), a wide 0.95V to 5V translation range, and ultra-low quiescent current of 6 uA typical. The fast propagation delay preserves signal timing in high-speed links up to 100 Mbps. Technically, the LSF0102 uses a pass-gate (transmission-gate) architecture. The reference pins VREF_A and VREF_B set the logic levels on each side, and external pull-up resistors define the high levels of each domain. The device senses data direction automatically, making it transparent to the host system and reducing pin count and firmware complexity compared to directional translators. Typical applications include I2C and SMBus level shifting between 1.8V, 3.3V, and 5V domains, SPI and UART interfaces in mixed-voltage embedded systems, general-purpose GPIO translation, and battery-powered portable devices where the 6 uA quiescent current minimizes standby drain. Design consideration: pull-up resistor values directly trade off maximum data rate against power consumption; use lower resistance (1-2 kilohm) for high-speed push-pull operation and higher resistance (4.7-10 kilohm) for low-power open-drain buses.

RFQ پەیوەندی