NE5532DR vs TS902ID بەراوردکردن

بەراوردکردنی وردی لایەن بە لایەن لە NE5532DR لەلایەن Texas Instruments و TS902ID لەلایەن STMicroelectronics. تایبەتمەندییە سەرەکییەکان، پارامیتەرە کارەباییەکان، پاکێجکردن، دۆخی چرخەی ژیان، نرخ و بەردەستبوون بەراورد بکە بۆ دیاریکردنی باشترین پێکھێنەر بۆ پێداویستییەکانی دیزاینەکەت.

Texas Instruments
NE5532DR NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments

NE5532DR - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments

NE5532DR ✓ چالاک

بەراوردکردنی تایبەتمەندییەکان

پارامەتر NE5532DR TS902ID
براند Texas Instruments STMicroelectronics
پۆل Amplifier ICs Amplifier ICs
دۆخی چرخەی ژیان چالاک Obsolete
Amplifier Type Dual low-noise operational amplifier Dual operational amplifier
Number of Amplifier Circuits 2 circuits —
Equivalent Input Noise Voltage 5 nV/√Hz typical at 1 kHz —
Unity-Gain Bandwidth 10 MHz typical —
DC Voltage Gain 100 V/mV typical —
Slew Rate 10 V/μs typical —
Common-Mode Rejection Ratio 100 dB typical —
Specified Supply Voltage Range ±5 V to ±15 V —
Maximum Total Supply Voltage 30 V —
Output Voltage Swing 32 V peak-to-peak typical at ±18 V and 600 Ω load —
مەودای پلەی گەرمیی کارکردن 0 °C to +70 °C for NE5532x -40C to +125C
پاکێج 8-pin SOIC SOIC-14 (SO14), surface mount
جۆری دامەزراندن Surface Mount Surface mount
Product Category Standard general-purpose amplifier —
Application Category Audio applications General-purpose instrumentation and signal conditioning
Manufacturer Texas Instruments —
دۆخی RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Halogen-Free Status [DATA_NEEDED: halogen-free status] —
ئێستای دابینکردن [DATA_NEEDED: supply current] —
Input Bias Current [DATA_NEEDED: input bias current] —
Open-Loop Gain [DATA_NEEDED: open-loop gain at specified frequency] —
Noise at 20 Hz to 20 kHz [DATA_NEEDED: total input noise over audio bandwidth] —
Channel Count — 2 channels
Rail-to-Rail — Input and output
Gain-Bandwidth Product — 1.4 MHz
Input Offset Voltage — 10 mV
Supply Voltage Range — Single or dual operation from 2.5 V to 16 V
Standby Current — 0.5 uA
Standby Output State — Reduced current consumption and high-impedance outputs
Package Pin Count — 14 pins
Architecture — CMOS
Output Impedance in Standby — High impedance
Operating Mode — Single-supply or dual-supply operation
Manufacturer Product Description — Rail-to-rail CMOS dual operational amplifier with standby position
دۆخی چرخەی ژیان — Obsolete product according to manufacturer catalog

داتاشیت و سەرچاوەکان

گەڕان بەناو ھەموو بەرھەمەکاندا دروستکردنی BOM داواکردنی نرخ