AD745AQ - 20MHz Low-Noise FET Op Amp | Analog Devices
MPN: AD745AQ ✗ کۆتایی ژیانAD745AQ گشتی
An operational amplifier is a voltage-feedback amplifier that uses high open-loop gain to amplify small differential signals. Its hierarchy extends from amplifier ICs to analog integrated circuits and semiconductor devices. The AD745AQ uses a JFET input stage to provide low input bias current, while its high bandwidth and slew rate preserve signal fidelity across audio, instrumentation, and control systems.
Key electrical characteristics include a 20 MHz gain-bandwidth product, 12.5 V/us slew rate, 90 dB open-loop gain, 250 pA maximum input bias current, and 90 uV/°C input voltage offset temperature drift. The manufacturer lists the AD745 family as not recommended for new designs, making legacy maintenance and previously qualified designs the primary use cases. A ceramic CERDIP package supports operation in demanding temperature environments.
The AD745 combines low-noise JFET inputs with high-speed closed-loop performance. Its input bias current remains suitable for high-impedance sources, while the 20 MHz bandwidth supports wider signal bandwidth than precision-only amplifiers. The 12.5 V/us slew rate helps preserve large-signal accuracy when configured as a non-inverting or inverting amplifier with suitable feedback and compensation.
Typical uses include low-noise audio preamplification, laboratory instrumentation, sensor signal conditioning, photodiode amplification, and precision feedback networks in industrial control equipment. The low 250 pA maximum bias current is particularly useful when source impedance is high, while the 90 dB open-loop gain supports accurate closed-loop amplification when the feedback network is properly selected.
Designers should verify the required supply voltage, unity-gain stability, noise-gain bandwidth, output swing, and load capability against the manufacturer datasheet. Because the AD745AQ is a legacy device, engineers should also confirm availability and source the exact ceramic-package ordering code when maintaining an existing qualified assembly.
This product page combines the AD745AQ operating characteristics, ordering information, package details, comparison guidance, and practical design notes to support legacy-system maintenance. It also explains where to obtain the manufacturer datasheet and how to evaluate exact MPN substitutions before making a board-level change.
جێگرەوەکانی جێگۆڕکێ بۆ AD745AQ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD745AQ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Amplifier Type, Package, Mounting Type, Slew Rate, Operating Temperature Range.
AD745JR-16
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →AD745KR-16
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →AD745AQ زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Amplifier Type | Voltage-feedback operational amplifier |
| Input Transistor Type | JFET |
| Number of Amplifiers | 1 amplifier |
| Gain-Bandwidth Product | 20 MHz |
| Slew Rate | 12.5 V/us |
| Maximum Input Offset Voltage | 1 mV |
| Maximum Input Bias Current | 250 pA |
| Open-Loop Gain | 90 dB |
| Input Voltage Offset Drift | 90 uV/°C |
| Compensation | Built-in compensation |
| پاکێج | 8-pin CERDIP |
| جۆری دامەزراندن | Through-hole |
ڕێکخستنی پینی AD745AQ
| پین 1 | NC — Not connected |
| پین 2 | −IN — Inverting input |
| پین 3 | +IN — Non-inverting input |
| پین 4 | V− — Negative supply voltage |
| پین 5 | NC — Not connected |
| پین 6 | OUT — Output voltage |
| پین 7 | V+ — Positive supply voltage |
| پین 8 | NC — Not connected |
بەکارهێنانە باوەکان
AD745AQ گونجاوە بۆ 6 بەکارھێنانs: Precision Audio Preamplification, High-Impedance Sensor Interface, Photodiode Current-to-Voltage Conversion, Laboratory Instrumentation Amplifier, Industrial Control Feedback Loop, Legacy Test and Measurement Equipment.
Precision Audio Preamplification
The AD745AQ suits low-level audio preamplification because its JFET input stage provides a maximum bias current of 250 pA while preserving a 20 MHz gain-bandwidth product. In a non-inverting preamplifier, the device can provide signal gain with low loading on a high-impedance source. Its 12.5 V/us slew rate also preserves large-signal behavior across audio-band waveforms. The principal design task is selecting a feedback network and output-load arrangement that satisfy the amplifier's stability and output-swing limits.
پێشنیارکراو
High-Impedance Sensor Interface
The AD745AQ is appropriate for interfaces that use high-impedance sensors because its maximum input bias current of 250 pA limits the load placed on the source. A typical implementation places the sensor at the non-inverting input and uses the amplifier to convert a small voltage excursion into a more useful downstream level. The 20 MHz bandwidth permits fast sensor signals, while the 90 dB open-loop gain supports effective feedback-defined amplification. Confirm the sensor's source impedance and the complete noise-gain curve before finalizing the external resistor values.
پێشنیارکراو
Photodiode Current-to-Voltage Conversion
The AD745AQ can serve as the transimpedance amplifier in a photodiode front end when the photodiode capacitance and feedback impedance permit stable operation. Its 250 pA maximum input bias current is especially relevant because bias current flowing through a high-value feedback resistor can shift the output voltage. The 20 MHz gain-bandwidth product and 12.5 V/us slew rate provide useful dynamics for moderate-bandwidth optical signals. Compensation capacitance and stray-capacitance control are essential to preserve stability in the completed layout.
پێشنیارکراو
Laboratory Instrumentation Amplifier
The AD745AQ can be used in laboratory instrumentation when a low-noise, high-input-impedance stage must operate ahead of a measurement chain. Its 90 dB open-loop gain, 20 MHz bandwidth, and 12.5 V/us slew rate provide a useful balance between gain accuracy and signal speed. In an inverting configuration, the external feedback components define signal gain and bandwidth, making component selection critical around the op amp's noise-gain profile. A grounded, short feedback path helps maintain stability and reduce parasitic pickup.
پێشنیارکراو
Industrial Control Feedback Loop
The AD745AQ is applicable to legacy industrial control boards requiring a high-speed feedback amplifier around an analog control stage. Its 12.5 V/us slew rate supports faster control-loop dynamics than a precision-only amplifier, while the low 250 pA maximum bias current reduces loading on high-impedance sensing nodes. The 90 dB open-loop gain can improve closed-loop control accuracy when paired with a suitable compensation network. Validate loop stability, output swing, supply range, and temperature margins before using it in new safety-critical equipment.
پێشنیارکراو
Legacy Test and Measurement Equipment
The AD745AQ is well suited to servicing legacy test and measurement equipment that was designed around the AD745 family's low-noise BiFET architecture. Its 20 MHz bandwidth is useful for analog front ends that must process signals beyond the audio band, while the 250 pA maximum input bias current supports high-impedance probes. The ceramic CERDIP package supports board-level replacement where compatible through-hole space exists. Before substitution, compare the exact offset, bias-current, temperature, and supply specifications against the original equipment requirements.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD745AQ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD745JR-16 | AD745KR-16 |
|---|---|---|---|
| Package | 8-pin CERDIP | 8-pin CERDIP | 8-pin CERDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Gain-Bandwidth Product | 20 MHz | 20 MHz | 20 MHz |
| Slew Rate | 12.5 V/us | 12.5 V/us | 12.5 V/us |
| Maximum Input Bias Current | 250 pA | 250 pA | 250 pA |
| Maximum Input Offset Voltage | 1 mV | 1 mV | 1 mV |
| Open-Loop Gain | 90 dB | 90 dB | 90 dB |
| Input Offset Drift | 90 uV/°C | 90 uV/°C | 90 uV/°C |
| Compensation | Built-in compensation | Built-in compensation | Built-in compensation |
جیاکەرەوە سەرەکییەکان
- Combines ultralow-noise signal handling with very low input current (بەراورد بەAD745JR-16)
- Provides adequate dynamics for non-inverting signal amplification (بەراورد بەAD745KR-16)
- Uses a ceramic through-hole package for established legacy assemblies (بەراورد بەAD745JR-16)
تێبینییەکانی دیزاین
Do not treat every AD745 ordering suffix as an interchangeable drop-in. Confirm the physical package, temperature grade, supply range, offset limits, and bias-current limits against the exact manufacturer ordering row. The AD745AQ is an 8-pin CERDIP device, so a plastic-DIP or surface-mount family member can require lead-length, insertion, or PCB-layout changes even when its headline bandwidth and slew rate are similar.
Keep the op-amp feedback loop compact and route the inverting-input node with minimal parasitic capacitance. For high-value feedback resistors, include guarding or a driven guard if leakage from PCB contamination could shift the output. The JFET input stage can tolerate high source impedance, but it does not remove the need for clean boards, short input traces, and proper grounding around sensitive analog nodes.
Evaluate stability at the actual noise gain rather than assuming unity-gain behavior. Although the AD745AQ has built-in compensation, a transimpedance or highly noninverting circuit can require an additional compensation capacitor. Add input and output isolation resistors where source capacitance, load capacitance, or long PCB traces could change stability, and verify the final design across supply, temperature, and output-load extremes.
زانیاری پابەندبوون
The exact AD745AQ ordering code's material and environmental declarations are not stated in the manufacturer information shown on this page. Request the applicable manufacturer declarations before treating legacy inventory as compliant.