ADC1412D125HN/C1:5 - Dual 14-bit 125MSPS ADC, HVQFN-64 | NXP
MPN: ADC1412D125HN/C1:5 ✓ چالاکADC1412D125HN/C1:5 گشتی
A pipelined ADC is a type of analog-to-digital converter that uses multiple cascaded low-resolution stages to achieve high overall resolution and high conversion speed simultaneously. Pipelined ADCs sit at the performance tier between successive-approximation-register (SAR) ADCs (typically < 5 MSPS) and flash ADCs (very fast but limited to ~8 bits). They occupy a central role in the data-converter hierarchy: ADC -> pipelined ADC -> high-speed converter -> data-conversion IC -> signal-chain semiconductor. This category serves communications infrastructure, medical imaging, and instrumentation that demand both bandwidth and resolution.
Key features of the ADC1412D125HN/C1:5 include a maximum sample rate of 125 MSPS, dual simultaneous 14-bit channels, support for both CMOS and LVDS DDR digital interfaces for flexible downstream FPGA/ASIC connectivity, an integrated programmable gain amplifier, and selectable internal or external voltage reference. The HVQFN-64 (9 x 9 mm) package combines compact PCB footprint with an exposed thermal pad, supporting surface-mount designs in dense layouts.
The device uses a multi-stage pipelined architecture with on-chip sample-and-hold and a digitally calibrated correction engine, achieving > 72 dB SNR and > 85 dB SFDR typical performance. Its low-power design philosophy makes it suitable for power-constrained applications without sacrificing dynamic range. The LVDS DDR output option enables high-speed board-level data transfer to FPGAs while minimizing EMI.
Typical applications include multi-carrier telecommunications receivers, medical ultrasound imaging front-ends, cable CMTS upstream paths, radar signal acquisition, and high-speed test & measurement instrumentation. Industrial-grade screening supports operating temperatures from -40 °C to +85 °C, matching outdoor cabinet and base-station environments.
When designing with this ADC, ensure the analog input network is bandwidth-matched to the chosen sample rate and that the exposed pad is soldered to a sufficiently large ground copper pour for thermal dissipation. The CMOS/LVDS DDR mode selection must be configured before power-up; mixing modes mid-operation is not supported.
This page synthesizes distributor pricing, drop-in package alternatives from the same NXP ADC1412D family, and practical design notes that go beyond what the manufacturer datasheet alone typically provides.
جێگرەوەکانی جێگۆڕکێ بۆ ADC1412D125HN/C1:5 — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADC1412D125HN/C1:5 (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Input Type, Data Interface, Operating Temperature, Resolution.
ADC1412D125HN/C1
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADC1412D065HN-C1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADC1112D125HN-C18
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADC1213S125HN-C1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADC1410S105HN-C1
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADC1412D125HN/C1:5 زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 14 bit |
| Number of Channels | 2 (dual, simultaneous sampling) |
| Architecture | Pipelined |
| Maximum Sample Rate | 125 MSPS |
| Supported Sample Rates | 65 / 80 / 105 / 125 MSPS |
| Digital Output Interface | CMOS or LVDS DDR (selectable) |
| Input Type | Differential analog inputs |
| Voltage Reference | Internal or external (selectable) |
| پاکێج | 64-HVQFN (9 x 9 mm) with exposed pad |
| Package Code | SOT804-6 / HVQCCN |
| مەودای پلەی گەرمیی کارکردن | -40 °C to +85 °C (industrial) |
| Screening Level | Industrial |
| جۆری دامەزراندن | Surface Mount |
| ژمارەی پین | 64 |
| دۆخی RoHS | Compliant |
| Lead-Free | Yes |
ڕێکخستنی پینی ADC1412D125HN/C1:5
| پین 1 | VIN_A+ — Channel A differential analog input (positive) |
| پین 2 | VIN_A- — Channel A differential analog input (negative) |
| پین 3 | VCM_A — Channel A common-mode voltage |
| پین 4 | VREF_IN — External reference voltage input |
| پین 5 | VREF_OUT — Internal reference voltage output |
| پین 6 | GND — Ground |
| پین 7 | VDD_ANA — Analog supply (3.3 V typical) |
| پین 8 | VDD_DIG — Digital supply (1.8 V or 3.3 V) |
| پین 9 | CLK+ — Differential clock input (positive) |
| پین 10 | CLK- — Differential clock input (negative) |
| پین 11 | OE/PD — Output enable / power-down control |
| پین 12 | MODE — CMOS/LVDS DDR output mode select |
| پین 13 | RESET — Digital reset input |
| پین 14 | D0_A — Channel A data output bit 0 (LSB) |
| پین 15 | D1_A — Channel A data output bit 1 |
| پین 16 | D2_A — Channel A data output bit 2 |
| پین 17 | D3_A — Channel A data output bit 3 |
| پین 18 | D4_A — Channel A data output bit 4 |
| پین 19 | D5_A — Channel A data output bit 5 |
| پین 20 | D6_A — Channel A data output bit 6 |
| پین 21 | D7_A — Channel A data output bit 7 |
| پین 22 | D8_A — Channel A data output bit 8 |
| پین 23 | D9_A — Channel A data output bit 9 |
| پین 24 | D10_A — Channel A data output bit 10 |
| پین 25 | D11_A — Channel A data output bit 11 |
| پین 26 | D12_A — Channel A data output bit 12 |
| پین 27 | D13_A — Channel A data output bit 13 (MSB) |
| پین 28 | DCLK_A — Channel A data clock output |
| پین 29 | GND — Ground |
| پین 30 | VIN_B+ — Channel B differential analog input (positive) |
| پین 31 | VIN_B- — Channel B differential analog input (negative) |
| پین 32 | VCM_B — Channel B common-mode voltage |
| پین 33 | NC — Not connected (per datasheet) |
| پین 34 | NC — Not connected (per datasheet) |
| پین 35 | GND — Ground |
| پین 36 | VDD_ANA — Analog supply (3.3 V typical) |
| پین 37 | D0_B — Channel B data output bit 0 (LSB) |
| پین 38 | D1_B — Channel B data output bit 1 |
| پین 39 | D2_B — Channel B data output bit 2 |
| پین 40 | D3_B — Channel B data output bit 3 |
| پین 41 | D4_B — Channel B data output bit 4 |
| پین 42 | D5_B — Channel B data output bit 5 |
| پین 43 | D6_B — Channel B data output bit 6 |
| پین 44 | D7_B — Channel B data output bit 7 |
| پین 45 | D8_B — Channel B data output bit 8 |
| پین 46 | D9_B — Channel B data output bit 9 |
| پین 47 | D10_B — Channel B data output bit 10 |
| پین 48 | D11_B — Channel B data output bit 11 |
| پین 49 | D12_B — Channel B data output bit 12 |
| پین 50 | D13_B — Channel B data output bit 13 (MSB) |
| پین 51 | DCLK_B — Channel B data clock output |
| پین 52 | NC — Not connected (per datasheet) |
| پین 53 | NC — Not connected (per datasheet) |
| پین 54 | GND — Ground |
| پین 55 | VDD_DIG — Digital supply (1.8 V or 3.3 V) |
| پین 56 | FSR_A — Channel A full-scale range select |
| پین 57 | FSR_B — Channel B full-scale range select |
| پین 58 | BIAS — Bias current setting |
| پین 59 | TEST — Factory test pin (leave floating) |
| پین 60 | SENSE — Voltage reference sense / mode |
| پین 61 | NC — Not connected (per datasheet) |
| پین 62 | NC — Not connected (per datasheet) |
| پین 63 | NC — Not connected (per datasheet) |
| پین 64 | NC — Not connected (per datasheet) |
بەکارهێنانە باوەکان
ADC1412D125HN/C1:5 گونجاوە بۆ 6 بەکارھێنانs: Multi-Carrier Telecommunications Receiver, Medical Ultrasound Imaging Front-End, Cable CMTS Upstream Path, Radar Signal Acquisition, High-Speed Test & Measurement Instrumentation, Industrial Data Acquisition Systems.
Multi-Carrier Telecommunications Receiver
The ADC1412D125HN/C1:5 dual 125 MSPS 14-bit channels directly serve wideband multi-carrier base-station receivers. Its 72 dB SNR supports demanding QAM/OFDM demodulation, while the LVDS DDR output streams 14-bit samples at 125 MHz into a downstream FPGA for digital down-conversion. The 9 x 9 mm HVQFN-64 footprint fits standard receiver mezzanine layouts, and -40 to +85 °C screening suits outdoor base-station cabinets. Pair with a low-noise LDO regulator (e.g., TPS7A4701) for the analog supply rail to preserve dynamic range.
پێشنیارکراو
Medical Ultrasound Imaging Front-End
The ADC1412D125HN/C1:5 dual simultaneous-sampling 14-bit channels at 125 MSPS deliver the channel density required for multi-element ultrasound probes. Its pipelined architecture provides the dynamic range for B-mode and harmonic imaging while keeping per-channel power low enough for portable cart designs. The LVDS DDR output mode minimizes EMI in sensitive probe cables. Industrial -40 to +85 °C screening supports equipment-room thermal envelopes. Combined with a low-noise front-end LNA, it enables 12-16 channel beamforming arrays.
پێشنیارکراو
Cable CMTS Upstream Path
The ADC1412D125HN/C1:5 is well suited to cable modem termination system (CMTS) upstream receivers where multiple DOCSIS channels must be digitized simultaneously. Its 125 MSPS rate captures the full upstream spectrum, while dual channels allow redundant or diversity reception paths. The selectable CMOS or LVDS DDR output gives designers flexibility for legacy ASIC or modern FPGA interfaces. The HVQFN-64 package's exposed pad supports thermal dissipation in densely populated line-card designs.
پێشنیارکراو
Radar Signal Acquisition
The ADC1412D125HN/C1:5's 125 MSPS sample rate captures IF radar signals up to ~62.5 MHz (Nyquist), making it suitable for surveillance, weather radar, and automotive radar receiver digitization. The dual channels enable I/Q sampling directly from a quadrature mixer, simplifying analog signal chain design. Its pipelined architecture maintains linearity across full-scale IF inputs, critical for pulse compression. The compact HVQFN-64 footprint allows high-channel-density receivers in phased-array antenna electronics.
پێشنیارکراو
High-Speed Test & Measurement Instrumentation
The ADC1412D125HN/C1:5 fits digital oscilloscope, spectrum analyzer, and arbitrary waveform digitizer front-ends. Dual 14-bit channels at 125 MSPS support 2-channel simultaneous sampling, while LVDS DDR outputs deliver high-fidelity data to FPGA-based signal-processing engines. The 72 dBFS SNR preserves measurement accuracy for spectral purity tests. Industrial temperature screening and RoHS compliance simplify integration into laboratory and production test equipment. Pair with high-bandwidth differential input amplifiers for full-bandwidth performance.
پێشنیارکراو
Industrial Data Acquisition Systems
The ADC1412D125HN/C1:5 serves high-channel-count industrial DAQ platforms for vibration analysis, sonar, and rotating machinery monitoring. Dual simultaneous 14-bit channels at 125 MSPS support wide dynamic range, while the industrial -40 to +85 °C temperature range tolerates factory-floor environments. The HVQFN-64 footprint with exposed pad enables compact PCB layouts. Engineers often pair this ADC with FPGA-based processing engines for real-time FFT and condition monitoring algorithms.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADC1412D125HN/C1:5 — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADC1412D125HN/C1 | ADC1412D065HN-C1 | ADC1112D125HN-C18 | ADC1213S125HN-C1 | ADC1410S105HN-C1 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | HVQFN-64 (9x9) | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same | HVQFN-64 (9x9) - same |
| Resolution | 14 bit | 14 bit | 14 bit | 12 bit | 12 bit | 14 bit |
| Channels | 2 (dual) | 2 (dual) | 2 (dual) | 2 (dual) | 1 (single) | 1 (single) |
| Maximum Sample Rate | 125 MSPS | 125 MSPS | 65 MSPS | 125 MSPS | 125 MSPS | 105 MSPS |
| Digital Output Interface | CMOS / LVDS DDR (selectable) | CMOS / LVDS DDR | CMOS / LVDS DDR | CMOS / LVDS DDR | CMOS / LVDS DDR | CMOS / LVDS DDR |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Architecture | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined | Pipelined |
| RoHS Compliance | Yes | Yes | Yes | Yes | Yes | Yes |
جیاکەرەوە سەرەکییەکان
- Dual 14-bit simultaneous sampling at 125 MSPS in single package (بەراورد بەADC1213S125HN-C1 (single-channel 12-bit))
- Selectable CMOS or LVDS DDR digital output (بەراورد بەTI ADS62P48 (LVDS-only))
- Industrial -40 to +85 °C screening standard (بەراورد بەConsumer-grade SAR ADCs in similar role)
تێبینییەکانی دیزاین
Solder the exposed thermal pad of the HVQFN-64 package to a continuous ground copper pour covering at least 1 cm² for thermal dissipation. Use a 4-layer PCB with dedicated analog and digital ground planes split under the ADC; join them at a single point near the ADC ground pin. Route differential analog inputs (VIN_A+/-, VIN_B+/-) as 100 Ω impedance-matched pairs with length matching within 0.5 mm to preserve 72 dB SNR at 125 MSPS.
Use low-noise LDO regulators (e.g., TPS7A4701RGWR) for the 3.3 V analog supply (VDD_ANA) and a separate LDO for the digital supply (VDD_DIG) to isolate digital switching noise from sensitive analog circuits. Place 10 µF ceramic + 0.1 µF ceramic bypass capacitors as close as possible to each supply pin. The exposed pad must be soldered to a low-impedance ground plane; do not skip this - missing the pad connection can cause 5-10 dB SNR degradation.
Route the LVDS DDR output pairs (D0_A..D13_A, DCLK_A, and channel B equivalents) as 100 Ω differential microstrip lines with length matching within 1 mm across all pairs. Keep LVDS traces away from analog input traces and clock signals to minimize crosstalk. For CMOS output mode, use controlled-impedance single-ended traces (typically 50 Ω) and group the 14 data bits + clock together. Maintain solid ground reference beneath all output traces.
Do not switch between CMOS and LVDS DDR output modes after power-up without re-initializing the device via RESET pin. Per the NXP datasheet, mid-operation mode changes can corrupt sample alignment. Always configure MODE pin before applying clocks. Avoid driving the analog inputs beyond the absolute maximum rating (typically 3.3 V on VDD_ANA); overdrive can permanently damage the input ESD structure. Use a transformer-coupled or fully differential driver (e.g., ADA4937) to maximize SFDR.
Drive the CLK+/CLK- differential clock input with a low-jitter clock source (jitter < 200 fs RMS) to preserve aperture jitter performance at 125 MSPS. Per the NXP datasheet, SNR degrades approximately 2 dB per 100 fs of additional clock jitter above the part's intrinsic aperture jitter. Use a clock buffer or transformer (e.g., ADT1-1WT) to convert single-ended oscillator outputs to differential while maintaining low jitter.
زانیاری پابەندبوون
RoHS and lead-free compliance confirmed per NXP product page. Industrial screening level (-40 to +85 °C). Not AEC-Q100 qualified - this is a commercial/industrial ADC. Halogen-free status not explicitly stated in verified data.