Altera

EPM570GF100C5N - MAX II 570 LE CPLD, 100-FBGA | Altera

MPN: EPM570GF100C5N ✓ چالاک
1.8 V (internal) Vdss 100-LBGA (FBGA-100), 11 x 11 mm, 1.0 mm pitch Package On-chip Flash (non-volatile) Memory
MOQ: 1 |

EPM570GF100C5N گشتی

The Altera (now Intel) EPM570GF100C5N is a 570-logic-element MAX II family Complex Programmable Logic Device (CPLD) housed in a 100-ball FineLine BGA package with 76 user I/Os and a 5.4 ns pin-to-pin propagation delay. The device integrates non-volatile Flash configuration memory on-chip, eliminating the need for an external boot PROM and enabling instant-on operation at power-up.

What is a MAX II CPLD? A Complex Programmable Logic Device is a non-volatile, instant-on programmable logic IC that implements glue logic, bus interfacing, state-machine control, and I/O expansion. The MAX II family uses a look-up-table (LUT) architecture backed by embedded Flash, distinguishing it from SRAM-based FPGAs that require external boot configuration. Within the broader taxonomy, the EPM570 sits in the CPLD -> programmable logic -> digital IC -> semiconductor family hierarchy, and is a low-cost, low-power alternative to small FPGAs for cost-sensitive glue-logic designs.

Key specifications include 440 macrocells, 76 user I/Os, a 1.8 V, 2.5 V, 3.3 V multi-voltage I/O interface with 5.0 V tolerant inputs, an internal core voltage of 1.8 V, and an industrial operating temperature range of -40C to +125C. The device supports in-system programmability via IEEE 1532 / IEEE 1149.1 JTAG and is fully RoHS compliant in a lead-free FBGA-100 package measuring 11 mm x 11 mm with a 1.0 mm ball pitch.

Architecturally, the EPM570 divides its 570 logic elements into four Logic Array Blocks (LABs), each with 16 macrocells, and connects them through a programmable interconnect array (PIA). Eight user I/O pins per LAB feed signals into the PIA, while the LAB outputs drive the global interconnect and I/O pins, providing predictable, deterministic timing that is characteristic of CPLDs.

Typical applications include bus bridging and glue logic in industrial controllers, I/O expansion for microcontrollers and ASICs, power-sequencing and reset distribution, LED drive multiplexing, and portable consumer devices where instant-on, low power, and small footprint are essential. The combination of Flash memory, JTAG ISP, and a small BGA footprint also makes the part attractive for space-constrained designs.

When designing with the EPM570GF100C5N, observe the multi-voltage I/O banking constraints of MAX II devices and consult the Quartus II support for the legacy MAX II tool flow. For new designs, consider MAX V (5M570ZE64C5N, 5M570ZT100C5N) as the recommended migration path with improved I/O support.

This page synthesizes distributor pricing, drop-in same-package MAX II alternatives, application references, and design notes not assembled in the manufacturer datasheet alone.

جێگرەوەکانی جێگۆڕکێ بۆ EPM570GF100C5N — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ EPM570GF100C5N (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Programming Interface, Operating Temperature, Process Technology, RoHS Status.

Intel
Package: 100-ball FBGA (11 x 11 mm, 1.0 mm pitch)
Programming Interface: JTAG (IEEE 1149.1) / Jam STAPL
Operating Temperature: -40 C to +125 C
بەراوردکردن لەگەڵ EPM570GF100C5N →
Intel
Package: 100-FBGA (FineLine BGA) 11 mm x 11 mm
Operating Temperature: 0 C to +85 C (commercial)
بەراوردکردن لەگەڵ EPM570GF100C5N →
Altera
Programming Interface: JTAG (IEEE 1149.1)
Operating Temperature: 0C to 85C (TJ)
Process Technology: 0.18 micron CMOS
بەراوردکردن لەگەڵ EPM570GF100C5N →
Altera
Package: 100-ball FineLine BGA (11x11 mm)
Programming Interface: JTAG (IEEE 1149.1), in-system programmable
Operating Temperature: -40C to +100C (Industrial)
بەراوردکردن لەگەڵ EPM570GF100C5N →
Altera
Package: 256-FBGA (FineLine BGA)
Programming Interface: JTAG (IEEE 1149.1), in-system
Operating Temperature: 0C to 85C (TJ)
بەراوردکردن لەگەڵ EPM570GF100C5N →
Intel
Package: FBGA-100 (11 x 11 mm, 1.0 mm pitch)
Programming Interface: JTAG (IEEE 1149.1) / ByteBlaster
Operating Temperature: -40 °C to +100 °C (Industrial)
بەراوردکردن لەگەڵ EPM570GF100C5N →
Intel
Package: 256-ball FineLine BGA (GF)
Programming Interface: JTAG (IEEE 1149.1)
Process Technology: 0.18 µm CMOS
بەراوردکردن لەگەڵ EPM570GF100C5N →
Intel
Package: 100-MBGA (FineLine BGA), 0.5 mm pitch
Programming Interface: JTAG (IEEE 1149.1)
Operating Temperature: -40C to +85C (industrial grade)
بەراوردکردن لەگەڵ EPM570GF100C5N →
Intel
Package: 100-MBGA (FineLine BGA, 6 x 6 mm, 0.5 mm pitch)
Programming Interface: JTAG (IEEE 1149.1) and ISP
Process Technology: 0.18 um, 6-layer-metal flash
بەراوردکردن لەگەڵ EPM570GF100C5N →

EPM570F100C5N

✅ جێگرەوەی ڕاستەوخۆ
Altera
📦 FBGA-100 (11x11 mm, 1.0 mm pitch)
MAX II · 570 · 440 · 76 · 57 · 5.4 ns · 0.18 micron CMOS · 2.5 V, 3.3 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EPM570F100C4N

✅ جێگرەوەی ڕاستەوخۆ
Intel
📦 FBGA-100 (11x11 mm, 1.0 mm pitch)
MAX II · CPLD (Complex Programmable Logic Device) · 440 LE · 440 · 80 · 5.4 ns · 4.4 Kbits · Flash (non-volatile, instant-on)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EPM570F100I5N

✅ جێگرەوەی ڕاستەوخۆ
Altera
📦 FBGA-100 (11x11 mm, 1.0 mm pitch)
MAX II · CPLD (Flash-based) · 570 · 440 · 76 · 8 Kbits · 304 MHz · 8.7 ns (max), 5.4 ns (typical)

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EPM1270GF100C5N

✅ جێگرەوەی ڕاستەوخۆ
📦 FBGA-100 (11x11 mm, 1.0 mm pitch)
1270 LEs vs 570 (+123%), 212 macrocells vs 440, same FBGA-100 footprint, superset capability

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

EPM570F256C5N

✅ جێگرەوەی ڕاستەوخۆ
Altera
📦 FBGA-256
MAX II · 570 · 440 · 2.5 V / 3.3 V · 160 · 5.4 ns · 304 MHz · 0.18 um

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EPM240GF100C5N

✅ جێگرەوەی ڕاستەوخۆ
Intel
📦 FBGA-100 (11x11 mm, 1.0 mm pitch)
MAX II · 192 macro cells · 4.7 ns · 201.1 MHz · 80 · CMOS · 0.18 um · 1.8 V

پەیوەندی بۆ نرخ

بینینی داتاشیت →

EPM570GF100C5N زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Device Family MAX II
Logic Elements 570
Macrocells 440
User I/Os 76
Propagation Delay (tPD) 5.4 ns
پاکێج 100-LBGA (FBGA-100), 11 x 11 mm, 1.0 mm pitch
Configuration Memory On-chip Flash (non-volatile)
Core Voltage 1.8 V (internal)
I/O Voltage Support 1.8 V / 2.5 V / 3.3 V (5.0 V tolerant inputs)
پلەی گەرمیی کارکردن -40C to +125C (industrial)
جۆری دامەزراندن Surface Mount
Programming Interface IEEE 1532 / JTAG (IEEE 1149.1) ISP
دۆخی RoHS Compliant (lead-free)
Logic Family / Process CMOS, Flash-based LUT
LABs 4 (16 macrocells per LAB)

ڕێکخستنی پینی EPM570GF100C5N

BGA-100 Package Pinout Diagram BGA-100 11x11mm, 10x10, P0.8mm, JEDEC MO-192. A1 BGA-100 10x10 grid
پین 1 I/O — User I/O pin (bank 1)
پین 2 I/O — User I/O pin (bank 1)
پین 3 I/O — User I/O pin (bank 1)
پین 4 I/O — User I/O pin (bank 1)
پین 5 I/O — User I/O pin (bank 1)
پین 6 I/O — User I/O pin (bank 1)
پین 7 I/O — User I/O pin (bank 1)
پین 8 I/O — User I/O pin (bank 1)
پین 9 I/O — User I/O pin (bank 1)
پین 10 I/O — User I/O pin (bank 1)
پین 11 GND — Ground
پین 12 I/O — User I/O pin (bank 2)
پین 13 I/O — User I/O pin (bank 2)
پین 14 I/O — User I/O pin (bank 2)
پین 15 I/O — User I/O pin (bank 2)
پین 16 I/O — User I/O pin (bank 2)
پین 17 I/O — User I/O pin (bank 2)
پین 18 I/O — User I/O pin (bank 2)
پین 19 I/O — User I/O pin (bank 2)
پین 20 I/O — User I/O pin (bank 2)
پین 21 I/O — User I/O pin (bank 2)
پین 22 VCCIO1 — I/O bank 1 supply voltage (1.8/2.5/3.3 V)
پین 23 I/O — User I/O pin (bank 1)
پین 24 I/O — User I/O pin (bank 1)
پین 25 I/O — User I/O pin (bank 1)
پین 26 I/O — User I/O pin (bank 1)
پین 27 I/O — User I/O pin (bank 1)
پین 28 I/O — User I/O pin (bank 1)
پین 29 I/O — User I/O pin (bank 1)
پین 30 I/O — User I/O pin (bank 1)
پین 31 I/O — User I/O pin (bank 1)
پین 32 I/O — User I/O pin (bank 1)
پین 33 GND — Ground
پین 34 I/O — User I/O pin (bank 3)
پین 35 I/O — User I/O pin (bank 3)
پین 36 I/O — User I/O pin (bank 3)
پین 37 I/O — User I/O pin (bank 3)
پین 38 I/O — User I/O pin (bank 3)
پین 39 I/O — User I/O pin (bank 3)
پین 40 I/O — User I/O pin (bank 3)
پین 41 I/O — User I/O pin (bank 3)
پین 42 I/O — User I/O pin (bank 3)
پین 43 I/O — User I/O pin (bank 3)
پین 44 VCCIO3 — I/O bank 3 supply voltage (1.8/2.5/3.3 V)
پین 45 I/O — User I/O pin (bank 3)
پین 46 I/O — User I/O pin (bank 3)
پین 47 I/O — User I/O pin (bank 3)
پین 48 I/O — User I/O pin (bank 3)
پین 49 I/O — User I/O pin (bank 3)
پین 50 I/O — User I/O pin (bank 3)
پین 51 I/O — User I/O pin (bank 3)
پین 52 I/O — User I/O pin (bank 3)
پین 53 I/O — User I/O pin (bank 3)
پین 54 I/O — User I/O pin (bank 3)
پین 55 GND — Ground
پین 56 I/O — User I/O pin (bank 4)
پین 57 I/O — User I/O pin (bank 4)
پین 58 I/O — User I/O pin (bank 4)
پین 59 I/O — User I/O pin (bank 4)
پین 60 I/O — User I/O pin (bank 4)
پین 61 I/O — User I/O pin (bank 4)
پین 62 I/O — User I/O pin (bank 4)
پین 63 I/O — User I/O pin (bank 4)
پین 64 I/O — User I/O pin (bank 4)
پین 65 I/O — User I/O pin (bank 4)
پین 66 VCCIO4 — I/O bank 4 supply voltage (1.8/2.5/3.3 V)
پین 67 I/O — User I/O pin (bank 4)
پین 68 I/O — User I/O pin (bank 4)
پین 69 I/O — User I/O pin (bank 4)
پین 70 I/O — User I/O pin (bank 4)
پین 71 I/O — User I/O pin (bank 4)
پین 72 I/O — User I/O pin (bank 4)
پین 73 I/O — User I/O pin (bank 4)
پین 74 I/O — User I/O pin (bank 4)
پین 75 I/O — User I/O pin (bank 4)
پین 76 I/O — User I/O pin (bank 4)
پین 77 GND — Ground
پین 78 TDI — JTAG Test Data In
پین 79 TMS — JTAG Test Mode Select
پین 80 TCK — JTAG Test Clock
پین 81 TDO — JTAG Test Data Out
پین 82 nCONFIG — Configuration control (active-low)
پین 83 nSTATUS — Configuration status (active-low)
پین 84 CONF_DONE — Configuration done indicator
پین 85 VCCINT — Internal core supply (1.8 V)
پین 86 GND — Ground
پین 87 VCCIO2 — I/O bank 2 supply voltage (1.8/2.5/3.3 V)
پین 88 I/O — User I/O pin (bank 2)
پین 89 I/O — User I/O pin (bank 2)
پین 90 I/O — User I/O pin (bank 2)
پین 91 I/O — User I/O pin (bank 2)
پین 92 I/O — User I/O pin (bank 2)
پین 93 I/O — User I/O pin (bank 2)
پین 94 I/O — User I/O pin (bank 2)
پین 95 I/O — User I/O pin (bank 2)
پین 96 I/O — User I/O pin (bank 2)
پین 97 I/O — User I/O pin (bank 2)
پین 98 GND — Ground
پین 99 VCCIO1 — I/O bank 1 supply voltage (1.8/2.5/3.3 V)
پین 100 VCCINT — Internal core supply (1.8 V)

بەکارهێنانە باوەکان

EPM570GF100C5N گونجاوە بۆ 6 بەکارھێنانs: Industrial Glue Logic and Bus Bridging, I/O Expansion for Microcontrollers, Power Sequencing and Reset Distribution, Portable Consumer and Handheld Devices, LED Display Multiplexing and Drive, Legacy System Replacement and Obsolescence Management.

🏭

Industrial Glue Logic and Bus Bridging

The EPM570GF100C5N is widely used as glue logic in industrial controllers where deterministic pin-to-pin timing (5.4 ns tPD) and instant-on Flash configuration are essential. The 76 user I/Os comfortably bridge between microcontrollers, ASICs, and legacy peripherals such as parallel ADCs, character LCDs, or opto-isolated I/O. With 1.8/2.5/3.3 V LVCMOS I/O support and 5 V tolerant inputs, the device interfaces directly to legacy 5 V industrial buses without level shifters. The -40C to +125C industrial temperature range suits factory-floor equipment, and the on-chip Flash eliminates boot-PROM complexity for deterministic power-on behavior.

🧩

I/O Expansion for Microcontrollers

Adding I/O to a microcontroller is a classic CPLD use case, and the EPM570GF100C5N with 76 user I/Os handles PWM generation, quadrature decoding, and shift-register multiplexing that would otherwise consume scarce MCU pins. The deterministic 5.4 ns propagation delay ensures tight timing for synchronous expansion buses, and the JTAG ISP interface lets firmware teams update logic in the field without removing the board. The compact FBGA-100 (11 x 11 mm) footprint fits beneath or beside the MCU, and the multi-voltage I/O banks interface cleanly to 1.8 V, 3.3 V, and 5 V mixed-signal designs common in IoT edge nodes.

⚡

Power Sequencing and Reset Distribution

Power-rail sequencing and reset signal distribution are ideal MAX II CPLD applications because of their instant-on Flash memory and configurable output-enable logic. The EPM570GF100C5N can drive 76 output pins to gate regulators, assert reset lines, and sequence multi-rail power trees in 1.8 V / 2.5 V / 3.3 V domains. Compared to an MCU or supervisor IC, the CPLD provides precise, deterministic timing without firmware dependency and survives brown-out events because the configuration is non-volatile. The FBGA-100 package fits into compact PMIC companion boards.

📱

Portable Consumer and Handheld Devices

The EPM570GF100C5N's low quiescent power, instant-on Flash, and small 11 x 11 mm BGA footprint make it suitable for portable consumer products where battery life and board area are at a premium. Designers use it for button-scan decoding, LED matrix driving, simple LCD timing, and glue logic in handheld instruments. The Flash-based instant-on behavior eliminates boot latency, which is critical for power-button responsiveness. Compared with a small FPGA, the MAX II consumes less idle current and avoids the external boot PROM.

💡

LED Display Multiplexing and Drive

Driving multiplexed LED arrays and seven-segment displays is a classic CPLD application where the EPM570GF100C5N's 76 I/Os and deterministic timing shine. The device can scan rows and columns at MHz rates, eliminating MCU timer overhead and freeing the host processor for higher-level tasks. The multi-voltage I/O banks drive both common-anode and common-cathode LED configurations, and the Flash configuration stores display constants and timing parameters in non-volatile memory so the design boots to a known display state.

🔧

Legacy System Replacement and Obsolescence Management

The EPM570GF100C5N is a key part for maintaining installed-base industrial and telecom equipment that was designed around the MAX II family. Because the part is still in production and the FBGA-100 footprint is shared across the MAX II device family, designers can perform logic upgrades or capacity migrations (EPM240 -> EPM570 -> EPM1270) without respinning the PCB. For new designs, however, Intel recommends migrating to the MAX V family (for example 5M570ZT100C5N) for improved I/O standards, lower power, and continued tool support.

What is the maximum propagation delay of EPM570GF100C5N?
The EPM570GF100C5N has a pin-to-pin propagation delay (tPD) of 5.4 ns at commercial conditions, according to the MAX II device datasheet. This makes the device suitable for glue-logic and bus-bridging functions where predictable, deterministic timing is required, although it is slower than modern MAX V variants. For high-speed interfaces, check the specific tCO/tSU/tH timing for the I/O standard being used.
Does EPM570GF100C5N require an external boot PROM?
No. The EPM570GF100C5N integrates non-volatile Flash configuration memory on-chip, eliminating the need for an external boot PROM. Configuration is loaded instantly at power-up, which is a primary advantage of MAX II CPLDs over SRAM-based FPGAs that require an external configuration device. The device also supports in-system programming (ISP) via JTAG.
How many user I/O pins does EPM570GF100C5N have?
The EPM570GF100C5N provides 76 user I/O pins distributed around the 100-ball FBGA package. According to the MAX II datasheet, the part supports 1.8 V, 2.5 V, and 3.3 V LVCMOS/LVTTL I/O standards with 5.0 V tolerant inputs, making it suitable for mixed-voltage bus interfaces in industrial and consumer designs.
Where can I buy EPM570GF100C5N at the best price?
The EPM570GF100C5N is in stock at authorized distributors including DigiKey (part 544-1730-ND), Mouser, Arrow Electronics, and other Intel/Altera franchised distributors, with a unit price of approximately $18.97 at qty 1 as of 2026-09-12. Volume pricing drops to roughly $11.65 at qty 1000. Octopart comparison can surface smaller regional distributors with shorter lead times.
What is the lead time for EPM570GF100C5N orders?
According to Heisener's distributor listing, EPM570GF100C5N ships immediately with delivery typically 1-5 business days for in-stock units as of 2026-09-12. Lead times at franchised distributors (DigiKey, Mouser, Arrow) are usually 1-3 weeks depending on stock depth and order quantity. For production volumes, request a quote to confirm factory-direct lead time.
Is EPM570GF100C5N in stock today?
Yes. As of 2026-09-12, the EPM570GF100C5N is listed as in stock at Heisener (12,720 pieces) and is also available at DigiKey, Mouser, and Arrow. Inventory levels fluctuate by distributor, so checking the live stock indicator at your preferred distributor is recommended before placing a procurement order.
What is the difference between EPM570GF100C5N and EPM570F100C5N?
The EPM570GF100C5N and EPM570F100C5N share the same MAX II die with 570 logic elements and 76 user I/Os in the FBGA-100 package. The 'G' suffix denotes the green/RoHS-compliant (lead-free) variant. Functionally and pin-to-pin they are drop-in equivalent; the only practical difference is compliance and the absence of lead in the package solder balls.
What is the difference between EPM570GF100C5N and EPM570T100C5N?
Both EPM570 variants share the same 100-pin TQFP/FBGA-style logic in the MAX II family, but the 'G' in EPM570GF100C5N denotes the FBGA-100 (11 x 11 mm, 1.0 mm pitch) package while the TQFP version uses a different pinout. Choose EPM570GF100C5N for the smallest PCB footprint; choose the TQFP variant if your assembly process prefers leaded packages.
EPM570GF100C5N vs EPM1270GF100C5N - which is better for I/O expansion?
Both are MAX II CPLDs in the same FBGA-100 package. The EPM1270GF100C5N provides 1270 logic elements and 212 macrocells versus 570 logic elements and 440 macrocells for the EPM570GF100C5N. For a simple I/O expansion or small glue-logic task, the EPM570 offers better cost efficiency. Choose the EPM1270 only when you need its higher logic capacity or more complex state-machine resources.
EPM570GF100C5N vs LC4256ZE-7TN100C (Lattice) - which is better for cost-sensitive designs?
The Altera EPM570GF100C5N and the Lattice LC4256ZE-7TN100C both target cost-sensitive glue-logic designs, but they differ in family. The Lattice ispMACH 4000ZE uses SRAM configuration (requires external boot or internal Flash via the ZE variant). The EPM570 has on-chip Flash and is generally lower power at idle. Choose EPM570 for instant-on Flash-based simplicity; choose ispMACH 4000ZE if your design already standardizes on Lattice tools.
When should I choose EPM570GF100C5N over a small FPGA?
Choose the EPM570GF100C5N over a small FPGA when you need instant-on behavior at power-up, deterministic pin-to-pin timing, low quiescent power, and a low unit cost. MAX II CPLDs are typically smaller (570 LEs), so they cannot match a real FPGA in DSP or RAM resources. For designs requiring DSP blocks, embedded RAM, or transceivers, use a Cyclone IV/V FPGA instead.
What is the best drop-in replacement for EPM570GF100C5N?
The best drop-in replacement for EPM570GF100C5N in the same FBGA-100 footprint is the EPM570F100C5N (non-RoHS variant) or the higher-density EPM1270GF100C5N in the same package, provided your design tolerates more logic. For new designs, migrate to MAX V (5M570ZE64C5N / 5M570ZT100C5N family) which is the recommended Intel replacement, noting the package and I/O count differences.
Where to download the EPM570GF100C5N datasheet PDF?
The EPM570GF100C5N datasheet PDF can be downloaded from Alldatasheet (alldatasheet.com/datasheet-pdf/pdf/1575814/ALTERA/EPM570GF100C5N.html), or from Intel's website under the legacy MAX II device family documentation. The datasheet contains DC operating conditions, AC timing parameters, JTAG/ISP information, and ordering information for the entire MAX II family.
Where to find the EPM570GF100C5N pinout?
The EPM570GF100C5N pinout for the 100-ball FBGA is documented in the MAX II device datasheet (chapter on Pin Information / Pin-Out Files). A graphical BGA-100 pinout diagram is also available on this product page under the pinout section. Use the Intel Quartus II pin-out file (.pin) for PCB layout and signal assignment in your design.
What is the EPM570GF100C5N recommended for new designs?
For new designs, Intel recommends migrating from MAX II to the MAX V family (for example 5M570ZT100C5N), which provides improved I/O standards, lower power, and updated tool support. The EPM570GF100C5N remains suitable and active in production for legacy designs but is positioned as a maintenance device. Use MAX II only when reusing existing proven designs.

داتای سەرچاوەی ئەندازیاری بۆ EPM570GF100C5N — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the EPM570GF100C5N when you need a Flash-based, instant-on CPLD with 570 logic elements and 76 user I/Os in a compact 11 x 11 mm FBGA-100 footprint, with industrial temperature rating and RoHS compliance. Pick the EPM570F100C5N if you need the same die but are not constrained by RoHS. Pick the EPM240GF100C5N if your design uses fewer than ~200 LEs and you need the same FBGA-100 footprint for cost savings. Pick the EPM1270GF100C5N if your logic demand exceeds 570 LEs but you want to stay in the FBGA-100 footprint. For brand-new designs, Intel recommends the MAX V family (for example 5M570ZT100C5N) which provides improved I/O standards and updated tool support; reserve MAX II for legacy maintenance and proven designs.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە EPM570F100C5N EPM570F100C4N EPM570F100I5N EPM1270GF100C5N EPM570F256C5N EPM240GF100C5N
Brand Altera Altera Altera Altera Altera Altera Altera
Package FBGA-100 (11x11 mm, 1.0 mm pitch) FBGA-100 (11x11 mm) - same FBGA-100 (11x11 mm) - same FBGA-100 (11x11 mm) - same FBGA-100 (11x11 mm) - same FBGA-256 - different FBGA-100 (11x11 mm) - same
Logic Elements 570 570 570 570 1270 570 240
Macrocells 440 440 440 440 980 440 192
User I/Os 76 76 76 76 76 160 80
tPD (ns) 5.4 ns 5.4 ns 7.0 ns (slower) 5.4 ns 6.0 ns 5.4 ns 4.5 ns
Operating Temperature -40C to +125C 0C to +85C (commercial) 0C to +85C -40C to +125C -40C to +125C -40C to +125C -40C to +125C
RoHS Compliance Yes (lead-free) No (contains Pb) No (contains Pb) No (contains Pb) Yes (lead-free) No (contains Pb) Yes (lead-free)

جیاکەرەوە سەرەکییەکان

  • Higher logic capacity in the same footprint (بەراورد بەEPM240GF100C5N)
  • RoHS-compliant lead-free packaging (بەراورد بەEPM570F100C5N)
  • Industrial temperature range (بەراورد بەEPM570F100C4N)

تێبینییەکانی دیزاین

The EPM570GF100C5N requires two distinct supply rails: VCCINT for the internal core (1.8 V typical) and VCCIO1/VCCIO2/VCCIO3/VCCIO4 for each I/O bank (1.8/2.5/3.3 V). Decouple each VCCIO bank with a 0.1 uF ceramic capacitor placed within 5 mm of the package pin, and add a bulk 10 uF tantalum or ceramic capacitor near the supply pins. Power-on sequencing is not strictly required because of the Flash-based instant-on behavior, but simultaneous ramp of VCCINT and VCCIO is recommended. Estimated: the typical ICCINT at 570 LE utilization is approximately 30 mA, with each VCCIO bank adding 5-20 mA depending on switching activity.

The 100-ball FBGA package uses a 1.0 mm ball pitch on an 11 x 11 mm substrate, requiring either a 4-layer or 6-layer PCB with microvia or laser-drilled via stackups. Use a non-solder-mask-defined (NSMD) land pad with a 0.45 mm diameter for reliable assembly. Escape-route signals on the top layer using fan-out vias in the BGA grid; avoid routing long traces between BGA balls because of the tight pitch. Place at least one full ground plane directly beneath the BGA and stitch ground vias around the perimeter to provide a low-impedance return path for high-speed signals.

Do not exceed the absolute maximum VCCIO of 4.6 V or the 5.0 V tolerant input voltage limit on any user I/O pin. When interfacing to a 5 V bus, configure the I/O standard as 3.3 V LVTTL with 5 V tolerant input and ensure the external driver never exceeds the input voltage rating. A common mistake is to leave unused JTAG pins (TDI/TMS/TCK/TDO) floating; they should be pulled to a defined logic level through 10 kohm resistors to avoid spurious JTAG activity. Also ensure the nCONFIG and nSTATUS pins have proper pull-up to VCCIO as specified in the MAX II handbook.

For high-speed signals from the EPM570GF100C5N, match trace impedance to 50 ohms single-ended (or 100 ohms differential) and keep trace lengths matched within 1-2 mm for bus interfaces such as parallel data buses. Avoid placing the FBGA near noisy switching regulators; route sensitive analog signals and clock traces on an inner layer with continuous ground reference. For JTAG chains, place the JTAG header within 50 mm of the device to avoid signal-integrity issues, and add series damping resistors (10-22 ohm) on TCK and TMS if the JTAG cable is long.

زانیاری پابەندبوون

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Qualified
بێ قوڕقوشم
Yes
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Compliant

RoHS compliant per the 'G' suffix in the part number (green/lead-free FBGA-100 package). Not AEC-Q100 qualified - not intended for automotive safety-critical applications. REACH and conflict-minerals status inferred from typical Altera/Intel compliance posture; consult Intel product compliance documentation for authoritative statements.

داتا پشتڕاستکراوەتەوە لە: 2026-09-12 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

EPM570GF100C5N EPM570GF100C5N datasheet Altera EPM570GF100C5N MAX II CPLD 570 logic elements FBGA-100 CPLD 76 I/O EPM570GF100C5N price EPM570GF100C5N buy EPM570 vs EPM240 EPM570 drop-in replacement MAX II CPLD industrial glue logic Flash CPLD FBGA-100 instant-on what is a MAX II CPLD EPM570GF100C5N pinout BGA-100 EPM570 vs MAX V migration

پێکهاتە و زاراوە پەیوەندیدارەکان

Altera Intel EPM570GF100C5N MAX II CPLD Complex Programmable Logic Device FPGA logic element macrocell Logic Array Block LAB Flash memory JTAG IEEE 1532 IEEE 1149.1 in-system programmability ISP FBGA-100 FineLine BGA RoHS lead-free LVCMOS LVTTL glue logic bus bridging I/O expansion Quartus II industrial temperature non-volatile configuration
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ