LC4256B-5T176I - 256-Macrocell 176-LQFP CPLD | Lattice
部品番号: LC4256B-5T176I ✗ 生産終了LC4256B-5T176I 概要
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that integrates configurable logic blocks, programmable interconnect, and I/O resources into one package. Its hierarchy extends from programmable logic devices to CPLDs and then to broader integrated-circuit categories. Unlike a mask-programmable logic device, a CPLD can be configured after manufacture, making it practical for design revisions, prototypes, production programming, and field-manufactured control systems.
The LC4256B-5T176I provides 256 macrocells, approximately 227 MHz operation, and a 5 ns maximum propagation delay. Its in-system programming capability allows configuration data to be loaded into the device through its programming interface, supporting efficient production programming and design flexibility. The industrial-temperature suffix identifies the grade intended for operation across an extended commercial temperature range.
The -5 speed designation corresponds to the 5 ns maximum-delay performance grade identified for this part. This places the device between faster and slower members of the LC4256B family while retaining the same 176-pin implementation. The result is a useful balance between logic performance, I/O availability, and design complexity for systems that do not require the maximum speed of the fastest family member.
Typical uses include industrial control and factory automation, communications interfaces, test and measurement equipment, embedded system control, and general-purpose glue logic. The 176-pin LQFP package provides a substantial number of external connections compared with smaller CPLD packages, making it suitable when a design requires more I/O than compact devices can offer.
PCB design should preserve the manufacturer's recommended power, ground, configuration, and I/O layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be handled according to the manufacturer guidance to avoid unpredictable switching behavior. Programming-interface signals should remain accessible if in-system reconfiguration is required.
This product page organizes the verified device identity, package details, family alternatives, comparison parameters, sourcing path, and design considerations into one engineering reference. It also distinguishes confirmed specifications from parameters that should be checked directly in the manufacturer datasheet before schematic release or PCB layout approval.
ドロップイン代替品: LC4256B-5T176I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LC4256B-5T176I (同一形状・フットプリント) — 相違点: Architecture, Device Type, Temperature Grade.
LC4256B-5TN176I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4256B-5T176C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4256B-3TN176C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4256B-3T176I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LC4256B-75T176C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4256B-5T176I 最大定格&電気的特性
| Device Type | In-system-programmable CPLD |
| Product Family | ispMACH 4000B |
| Macrocell Count | 256 macrocells |
| Maximum Frequency | 227 MHz |
| Maximum Propagation Delay | 5 ns |
| Core Supply Voltage | 2.5 V |
| Supported Supply Voltages in Product Family | 1.8 V, 2.5 V, 3.3 V |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Programming Type | In-system programmable |
| パッケージ | 176-pin LQFP |
| ピン数 | 176 pins |
| 実装タイプ | Surface mount |
| Temperature Grade | Industrial grade |
LC4256B-5T176I 176-pin lqfp ピン配置ガイド
LC4256B-5T176I (176-pin lqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LC4256B-5T176I.
詳細は データシート をご参照ください。
主な用途
LC4256B-5T176I の用途: 6 件s: Industrial Automation Control, Factory Automation Interfaces, Communications Interface Consolidation, Test and Measurement Equipment, Embedded System Glue Logic, LED and Display Control.
Industrial Automation Control
The LC4256B-5T176I fits industrial automation controllers that combine sequential logic, interface decoding, and multiple external signals in one programmable device. Its 256 macrocells provide substantially more logic capacity than a small CPLD, while the 176-pin LQFP supports a broad connection count for encoders, sensors, actuators, and communications interfaces. The 5 ns maximum delay supports timing designs operating up to the listed 227 MHz. For industrial equipment, confirm the operating-temperature limits, isolate noisy power and motor paths, and validate every input and output assignment against the manufacturer pinout before releasing the PCB layout.
おすすめ
Factory Automation Interfaces
The LC4256B-5T176I is suitable for factory-automation interface logic where programmable timing and extensive I/O are more important than a very large FPGA fabric. It can implement protocol conversion, handshake control, pulse qualification, and machine-state logic while operating from a 2.5 V core class. The 176-pin package allows designers to reserve separate connections for differential or high-speed pairs, isolated interface boundaries, and diagnostic signals. Its in-system programming capability also permits production configuration and controlled field updates when the surrounding system supports the required programming interface and power-management sequence.
おすすめ
Communications Interface Consolidation
The LC4256B-5T176I can consolidate communications-interface glue logic that would otherwise occupy multiple small programmable devices. Its 256 macrocells and 176 available package connections are useful for framing control, FIFO-adjacent sequencing, status registers, and programmable I/O buffering. The listed 227 MHz maximum operating frequency and 5 ns maximum delay provide timing capability for many control-oriented interfaces, although actual signal-integrity limits depend on the I/O standard, board topology, and output loading. Validate edge rates, impedance, grounding, and any external transceiver requirements in the final signal-integrity analysis.
おすすめ
Test and Measurement Equipment
The LC4256B-5T176I fits test and measurement instruments that require coordinated control logic, instrument-bus decoding, trigger sequencing, and front-panel functions. The large 176-pin package provides enough connectivity to separate measurement inputs, calibration controls, status indicators, and communications links, while 256 macrocells support nontrivial control architectures. The in-system-programmable configuration supports repeatable production loading and engineering revisions. For precision analog and measurement circuitry, keep digital switching away sensitive nodes, use suitable isolation or shielding, and treat the CPLD as a digital controller rather than a substitute for precision analog front ends.
おすすめ
Embedded System Glue Logic
The LC4256B-5T176I is useful as programmable glue logic around a processor or FPGA when several custom timing, decode, and control functions must be consolidated. It can generate enables, arbitrate requests, translate interface formats, or implement legacy timing in parallel with the primary controller. The 176-pin LQFP accommodates both the primary logic and dedicated control pins, while the 5 ns delay grade provides margin for many synchronous control paths. The system designer must still define boot-state behavior, programming access, reset requirements, and fail-safe outputs so that the logic remains predictable before configuration or after a configuration fault.
おすすめ
LED and Display Control
The LC4256B-5T176I can manage display scanning, LED multiplexing, button decoding, and animation sequencing in control-oriented systems. Its 256 macrocells allow multiple display banks and refresh counters to coexist with system-control logic, while the 176-pin package provides a high connection count for display segments, enable lines, and controls. The listed 227 MHz operation is generally more than sufficient for common multiplexed LED matrices, but the designer should size timing from segment count, refresh target, and driver propagation delay. Use constant-current LED drivers where appropriate and account for display-current limits and grounding in the power-distribution design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LC4256B-5T176I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LC4256B-5TN176I | LC4256B-5T176C | LC4256B-3TN176C | LC4256B-3T176I |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) |
| Product Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B |
| Macrocell Count | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| Maximum Propagation Delay | 5 ns | 5 ns | 5 ns | 3 ns | 3 ns |
| Temperature Grade | Industrial grade | Industrial grade | Commercial grade | Commercial grade | Industrial grade |
| Programming Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
主な差別化要因
- Closest ordering variant retains the same speed and interface (vs LC4256B-5TN176I)
- Faster speed grade is available in the same package (vs LC4256B-3T176I)
- Industrial temperature grade distinguishes the target from the commercial variant (vs LC4256B-5T176C)
設計ノート
Use the 176-pin LQFP land pattern from the Lattice Semiconductor package drawing and preserve its pin-one orientation. Place supply bypass capacitors next to the relevant power pins, maintain short return paths to the ground plane, and keep configuration traces away from sensitive external inputs. Because this obsolete part may be procured from legacy inventory, inspect lead coplanarity, solderability, pin condition, and marking before approving a new PCB assembly.
Do not select a replacement using package and macrocell count alone. Confirm the operating voltage, configuration interface, timing grade, temperature suffix, and every user-pin function. The -3 grade offers a 2 ns shorter nominal maximum delay than the -5 target, while commercial-grade suffixes may not be acceptable for industrial environments. Re-run timing analysis after substitution because a faster grade can change hold-time margin and board-level behavior.
Follow the manufacturer-recommended supply tolerances, decoupling values, and power-up sequencing for the selected configuration. Verify the behavior of configuration pins and I/O states during reset and startup so that outputs do not enter an unsafe state. If multiple legacy inventory lots may be combined, verify that each lot has the same revision, speed grade, temperature grade, and programming specification before consolidation.
Treat the 176-pin package as capable of supporting many interfaces, but evaluate each signal individually for I/O standard, edge rate, loading, and board routing. Avoid routing sensitive clocks or analog-related control signals adjacent to switching outputs and high-current digital nets. Use the manufacturer's timing and I/O guidance for setup, hold, clock, and output-loading assumptions rather than treating the 227 MHz figure as a guaranteed signal rate for every I/O.
コンプライアンス情報
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The device is an industrial-grade programmable-logic IC rather than an automotive-qualified component.