LC4256B-5T176I - 256-Macrocell 176-LQFP CPLD | Lattice
MPN: LC4256B-5T176I ✗ Son Kullanım ZamanıLC4256B-5T176I Genel Bakış
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that integrates configurable logic blocks, programmable interconnect, and I/O resources into one package. Its hierarchy extends from programmable logic devices to CPLDs and then to broader integrated-circuit categories. Unlike a mask-programmable logic device, a CPLD can be configured after manufacture, making it practical for design revisions, prototypes, production programming, and field-manufactured control systems.
The LC4256B-5T176I provides 256 macrocells, approximately 227 MHz operation, and a 5 ns maximum propagation delay. Its in-system programming capability allows configuration data to be loaded into the device through its programming interface, supporting efficient production programming and design flexibility. The industrial-temperature suffix identifies the grade intended for operation across an extended commercial temperature range.
The -5 speed designation corresponds to the 5 ns maximum-delay performance grade identified for this part. This places the device between faster and slower members of the LC4256B family while retaining the same 176-pin implementation. The result is a useful balance between logic performance, I/O availability, and design complexity for systems that do not require the maximum speed of the fastest family member.
Typical uses include industrial control and factory automation, communications interfaces, test and measurement equipment, embedded system control, and general-purpose glue logic. The 176-pin LQFP package provides a substantial number of external connections compared with smaller CPLD packages, making it suitable when a design requires more I/O than compact devices can offer.
PCB design should preserve the manufacturer's recommended power, ground, configuration, and I/O layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be handled according to the manufacturer guidance to avoid unpredictable switching behavior. Programming-interface signals should remain accessible if in-system reconfiguration is required.
This product page organizes the verified device identity, package details, family alternatives, comparison parameters, sourcing path, and design considerations into one engineering reference. It also distinguishes confirmed specifications from parameters that should be checked directly in the manufacturer datasheet before schematic release or PCB layout approval.
Drop-in alternatifler için LC4256B-5T176I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LC4256B-5T176I (aynı form faktörü ve ayağa oturma) — farklı olan Architecture, Device Type, Temperature Grade.
LC4256B-5TN176I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4256B-5T176C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LC4256B-3TN176C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4256B-3T176I
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
LC4256B-75T176C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LC4256B-5T176I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | In-system-programmable CPLD |
| Product Family | ispMACH 4000B |
| Macrocell Count | 256 macrocells |
| Maximum Frequency | 227 MHz |
| Maximum Propagation Delay | 5 ns |
| Core Supply Voltage | 2.5 V |
| Supported Supply Voltages in Product Family | 1.8 V, 2.5 V, 3.3 V |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Programming Type | In-system programmable |
| Paket | 176-pin LQFP |
| Pin Sayısı | 176 pins |
| Montaj Türü | Surface mount |
| Temperature Grade | Industrial grade |
LC4256B-5T176I 176-pin lqfp Pin Yapısı Kılavuzu
LC4256B-5T176I (176-pin lqfp paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LC4256B-5T176I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LC4256B-5T176I için uygundur 6 uygulamas: Industrial Automation Control, Factory Automation Interfaces, Communications Interface Consolidation, Test and Measurement Equipment, Embedded System Glue Logic, LED and Display Control.
Industrial Automation Control
The LC4256B-5T176I fits industrial automation controllers that combine sequential logic, interface decoding, and multiple external signals in one programmable device. Its 256 macrocells provide substantially more logic capacity than a small CPLD, while the 176-pin LQFP supports a broad connection count for encoders, sensors, actuators, and communications interfaces. The 5 ns maximum delay supports timing designs operating up to the listed 227 MHz. For industrial equipment, confirm the operating-temperature limits, isolate noisy power and motor paths, and validate every input and output assignment against the manufacturer pinout before releasing the PCB layout.
Önerilen
Factory Automation Interfaces
The LC4256B-5T176I is suitable for factory-automation interface logic where programmable timing and extensive I/O are more important than a very large FPGA fabric. It can implement protocol conversion, handshake control, pulse qualification, and machine-state logic while operating from a 2.5 V core class. The 176-pin package allows designers to reserve separate connections for differential or high-speed pairs, isolated interface boundaries, and diagnostic signals. Its in-system programming capability also permits production configuration and controlled field updates when the surrounding system supports the required programming interface and power-management sequence.
Önerilen
Communications Interface Consolidation
The LC4256B-5T176I can consolidate communications-interface glue logic that would otherwise occupy multiple small programmable devices. Its 256 macrocells and 176 available package connections are useful for framing control, FIFO-adjacent sequencing, status registers, and programmable I/O buffering. The listed 227 MHz maximum operating frequency and 5 ns maximum delay provide timing capability for many control-oriented interfaces, although actual signal-integrity limits depend on the I/O standard, board topology, and output loading. Validate edge rates, impedance, grounding, and any external transceiver requirements in the final signal-integrity analysis.
Önerilen
Test and Measurement Equipment
The LC4256B-5T176I fits test and measurement instruments that require coordinated control logic, instrument-bus decoding, trigger sequencing, and front-panel functions. The large 176-pin package provides enough connectivity to separate measurement inputs, calibration controls, status indicators, and communications links, while 256 macrocells support nontrivial control architectures. The in-system-programmable configuration supports repeatable production loading and engineering revisions. For precision analog and measurement circuitry, keep digital switching away sensitive nodes, use suitable isolation or shielding, and treat the CPLD as a digital controller rather than a substitute for precision analog front ends.
Önerilen
Embedded System Glue Logic
The LC4256B-5T176I is useful as programmable glue logic around a processor or FPGA when several custom timing, decode, and control functions must be consolidated. It can generate enables, arbitrate requests, translate interface formats, or implement legacy timing in parallel with the primary controller. The 176-pin LQFP accommodates both the primary logic and dedicated control pins, while the 5 ns delay grade provides margin for many synchronous control paths. The system designer must still define boot-state behavior, programming access, reset requirements, and fail-safe outputs so that the logic remains predictable before configuration or after a configuration fault.
Önerilen
LED and Display Control
The LC4256B-5T176I can manage display scanning, LED multiplexing, button decoding, and animation sequencing in control-oriented systems. Its 256 macrocells allow multiple display banks and refresh counters to coexist with system-control logic, while the 176-pin package provides a high connection count for display segments, enable lines, and controls. The listed 227 MHz operation is generally more than sufficient for common multiplexed LED matrices, but the designer should size timing from segment count, refresh target, and driver propagation delay. Use constant-current LED drivers where appropriate and account for display-current limits and grounding in the power-distribution design.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LC4256B-5T176I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LC4256B-5TN176I | LC4256B-5T176C | LC4256B-3TN176C | LC4256B-3T176I |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) |
| Product Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B |
| Macrocell Count | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| Maximum Propagation Delay | 5 ns | 5 ns | 5 ns | 3 ns | 3 ns |
| Temperature Grade | Industrial grade | Industrial grade | Commercial grade | Commercial grade | Industrial grade |
| Programming Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Ana Farklılayıcılar
- Closest ordering variant retains the same speed and interface (karşılaştırma:LC4256B-5TN176I)
- Faster speed grade is available in the same package (karşılaştırma:LC4256B-3T176I)
- Industrial temperature grade distinguishes the target from the commercial variant (karşılaştırma:LC4256B-5T176C)
Tasarım Notları
Use the 176-pin LQFP land pattern from the Lattice Semiconductor package drawing and preserve its pin-one orientation. Place supply bypass capacitors next to the relevant power pins, maintain short return paths to the ground plane, and keep configuration traces away from sensitive external inputs. Because this obsolete part may be procured from legacy inventory, inspect lead coplanarity, solderability, pin condition, and marking before approving a new PCB assembly.
Do not select a replacement using package and macrocell count alone. Confirm the operating voltage, configuration interface, timing grade, temperature suffix, and every user-pin function. The -3 grade offers a 2 ns shorter nominal maximum delay than the -5 target, while commercial-grade suffixes may not be acceptable for industrial environments. Re-run timing analysis after substitution because a faster grade can change hold-time margin and board-level behavior.
Follow the manufacturer-recommended supply tolerances, decoupling values, and power-up sequencing for the selected configuration. Verify the behavior of configuration pins and I/O states during reset and startup so that outputs do not enter an unsafe state. If multiple legacy inventory lots may be combined, verify that each lot has the same revision, speed grade, temperature grade, and programming specification before consolidation.
Treat the 176-pin package as capable of supporting many interfaces, but evaluate each signal individually for I/O standard, edge rate, loading, and board routing. Avoid routing sensitive clocks or analog-related control signals adjacent to switching outputs and high-current digital nets. Use the manufacturer's timing and I/O guidance for setup, hold, clock, and output-loading assumptions rather than treating the 227 MHz figure as a guaranteed signal rate for every I/O.
Uyumluluk Bilgisi
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The device is an industrial-grade programmable-logic IC rather than an automotive-qualified component.