LC4256B-5T176I - 256-Macrocell 176-LQFP CPLD | Lattice
MPN: LC4256B-5T176I ✗ 停產LC4256B-5T176I 概覽
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that integrates configurable logic blocks, programmable interconnect, and I/O resources into one package. Its hierarchy extends from programmable logic devices to CPLDs and then to broader integrated-circuit categories. Unlike a mask-programmable logic device, a CPLD can be configured after manufacture, making it practical for design revisions, prototypes, production programming, and field-manufactured control systems.
The LC4256B-5T176I provides 256 macrocells, approximately 227 MHz operation, and a 5 ns maximum propagation delay. Its in-system programming capability allows configuration data to be loaded into the device through its programming interface, supporting efficient production programming and design flexibility. The industrial-temperature suffix identifies the grade intended for operation across an extended commercial temperature range.
The -5 speed designation corresponds to the 5 ns maximum-delay performance grade identified for this part. This places the device between faster and slower members of the LC4256B family while retaining the same 176-pin implementation. The result is a useful balance between logic performance, I/O availability, and design complexity for systems that do not require the maximum speed of the fastest family member.
Typical uses include industrial control and factory automation, communications interfaces, test and measurement equipment, embedded system control, and general-purpose glue logic. The 176-pin LQFP package provides a substantial number of external connections compared with smaller CPLD packages, making it suitable when a design requires more I/O than compact devices can offer.
PCB design should preserve the manufacturer's recommended power, ground, configuration, and I/O layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be handled according to the manufacturer guidance to avoid unpredictable switching behavior. Programming-interface signals should remain accessible if in-system reconfiguration is required.
This product page organizes the verified device identity, package details, family alternatives, comparison parameters, sourcing path, and design considerations into one engineering reference. It also distinguishes confirmed specifications from parameters that should be checked directly in the manufacturer datasheet before schematic release or PCB layout approval.
直接替換替代品,適用於 LC4256B-5T176I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4256B-5T176I (相同外形與佔位) — 差異在於 Architecture, Device Type, Temperature Grade.
LC4256B-5TN176I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4256B-5T176C
✅ 直接替換聯絡詢價
查看資料表 →LC4256B-3TN176C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4256B-3T176I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LC4256B-75T176C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4256B-5T176I 最大額定值與電氣特性
| Device Type | In-system-programmable CPLD |
| Product Family | ispMACH 4000B |
| Macrocell Count | 256 macrocells |
| Maximum Frequency | 227 MHz |
| Maximum Propagation Delay | 5 ns |
| Core Supply Voltage | 2.5 V |
| Supported Supply Voltages in Product Family | 1.8 V, 2.5 V, 3.3 V |
| Architecture | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Programming Type | In-system programmable |
| 封裝 | 176-pin LQFP |
| 腳位數 | 176 pins |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial grade |
LC4256B-5T176I 176-pin lqfp 腳位配置指南
LC4256B-5T176I(176-pin lqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4256B-5T176I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4256B-5T176I 適用於 6 應用s: Industrial Automation Control, Factory Automation Interfaces, Communications Interface Consolidation, Test and Measurement Equipment, Embedded System Glue Logic, LED and Display Control.
Industrial Automation Control
The LC4256B-5T176I fits industrial automation controllers that combine sequential logic, interface decoding, and multiple external signals in one programmable device. Its 256 macrocells provide substantially more logic capacity than a small CPLD, while the 176-pin LQFP supports a broad connection count for encoders, sensors, actuators, and communications interfaces. The 5 ns maximum delay supports timing designs operating up to the listed 227 MHz. For industrial equipment, confirm the operating-temperature limits, isolate noisy power and motor paths, and validate every input and output assignment against the manufacturer pinout before releasing the PCB layout.
推薦
Factory Automation Interfaces
The LC4256B-5T176I is suitable for factory-automation interface logic where programmable timing and extensive I/O are more important than a very large FPGA fabric. It can implement protocol conversion, handshake control, pulse qualification, and machine-state logic while operating from a 2.5 V core class. The 176-pin package allows designers to reserve separate connections for differential or high-speed pairs, isolated interface boundaries, and diagnostic signals. Its in-system programming capability also permits production configuration and controlled field updates when the surrounding system supports the required programming interface and power-management sequence.
推薦
Communications Interface Consolidation
The LC4256B-5T176I can consolidate communications-interface glue logic that would otherwise occupy multiple small programmable devices. Its 256 macrocells and 176 available package connections are useful for framing control, FIFO-adjacent sequencing, status registers, and programmable I/O buffering. The listed 227 MHz maximum operating frequency and 5 ns maximum delay provide timing capability for many control-oriented interfaces, although actual signal-integrity limits depend on the I/O standard, board topology, and output loading. Validate edge rates, impedance, grounding, and any external transceiver requirements in the final signal-integrity analysis.
推薦
Test and Measurement Equipment
The LC4256B-5T176I fits test and measurement instruments that require coordinated control logic, instrument-bus decoding, trigger sequencing, and front-panel functions. The large 176-pin package provides enough connectivity to separate measurement inputs, calibration controls, status indicators, and communications links, while 256 macrocells support nontrivial control architectures. The in-system-programmable configuration supports repeatable production loading and engineering revisions. For precision analog and measurement circuitry, keep digital switching away sensitive nodes, use suitable isolation or shielding, and treat the CPLD as a digital controller rather than a substitute for precision analog front ends.
推薦
Embedded System Glue Logic
The LC4256B-5T176I is useful as programmable glue logic around a processor or FPGA when several custom timing, decode, and control functions must be consolidated. It can generate enables, arbitrate requests, translate interface formats, or implement legacy timing in parallel with the primary controller. The 176-pin LQFP accommodates both the primary logic and dedicated control pins, while the 5 ns delay grade provides margin for many synchronous control paths. The system designer must still define boot-state behavior, programming access, reset requirements, and fail-safe outputs so that the logic remains predictable before configuration or after a configuration fault.
推薦
LED and Display Control
The LC4256B-5T176I can manage display scanning, LED multiplexing, button decoding, and animation sequencing in control-oriented systems. Its 256 macrocells allow multiple display banks and refresh counters to coexist with system-control logic, while the 176-pin package provides a high connection count for display segments, enable lines, and controls. The listed 227 MHz operation is generally more than sufficient for common multiplexed LED matrices, but the designer should size timing from segment count, refresh target, and driver propagation delay. Use constant-current LED drivers where appropriate and account for display-current limits and grounding in the power-distribution design.
推薦
推薦產品摘要
工程參考資料,適用於 LC4256B-5T176I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4256B-5TN176I | LC4256B-5T176C | LC4256B-3TN176C | LC4256B-3T176I |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) | TQFP-176 (LQFP-176) |
| Product Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B |
| Macrocell Count | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| Maximum Propagation Delay | 5 ns | 5 ns | 5 ns | 3 ns | 3 ns |
| Temperature Grade | Industrial grade | Industrial grade | Commercial grade | Commercial grade | Industrial grade |
| Programming Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
主要差異化特點
- Closest ordering variant retains the same speed and interface (對比LC4256B-5TN176I)
- Faster speed grade is available in the same package (對比LC4256B-3T176I)
- Industrial temperature grade distinguishes the target from the commercial variant (對比LC4256B-5T176C)
設計說明
Use the 176-pin LQFP land pattern from the Lattice Semiconductor package drawing and preserve its pin-one orientation. Place supply bypass capacitors next to the relevant power pins, maintain short return paths to the ground plane, and keep configuration traces away from sensitive external inputs. Because this obsolete part may be procured from legacy inventory, inspect lead coplanarity, solderability, pin condition, and marking before approving a new PCB assembly.
Do not select a replacement using package and macrocell count alone. Confirm the operating voltage, configuration interface, timing grade, temperature suffix, and every user-pin function. The -3 grade offers a 2 ns shorter nominal maximum delay than the -5 target, while commercial-grade suffixes may not be acceptable for industrial environments. Re-run timing analysis after substitution because a faster grade can change hold-time margin and board-level behavior.
Follow the manufacturer-recommended supply tolerances, decoupling values, and power-up sequencing for the selected configuration. Verify the behavior of configuration pins and I/O states during reset and startup so that outputs do not enter an unsafe state. If multiple legacy inventory lots may be combined, verify that each lot has the same revision, speed grade, temperature grade, and programming specification before consolidation.
Treat the 176-pin package as capable of supporting many interfaces, but evaluate each signal individually for I/O standard, edge rate, loading, and board routing. Avoid routing sensitive clocks or analog-related control signals adjacent to switching outputs and high-current digital nets. Use the manufacturer's timing and I/O guidance for setup, hold, clock, and output-loading assumptions rather than treating the 227 MHz figure as a guaranteed signal rate for every I/O.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The device is an industrial-grade programmable-logic IC rather than an automotive-qualified component.