Lattice Semiconductor

LC4256B-5T176I - 256-Macrocell 176-LQFP CPLD | Lattice

N.º de pieza: LC4256B-5T176I ✗ Fin de vida
2.5 V Vdss 176-pin LQFP Package 227 MHz Speed
MOQ: 1 |

LC4256B-5T176I Descripción general

Lattice Semiconductor LC4256B-5T176I is an in-system-programmable CPLD with 256 macrocells, a maximum operating frequency of 227 MHz, a 5 ns maximum delay, and a 176-pin LQFP package. The device combines the architectural strengths of the ispLSI 2000 and ispMACH 4A families in the ispMACH 4000B product line.

A complex programmable logic device, or CPLD, is a user-programmable semiconductor that integrates configurable logic blocks, programmable interconnect, and I/O resources into one package. Its hierarchy extends from programmable logic devices to CPLDs and then to broader integrated-circuit categories. Unlike a mask-programmable logic device, a CPLD can be configured after manufacture, making it practical for design revisions, prototypes, production programming, and field-manufactured control systems.

The LC4256B-5T176I provides 256 macrocells, approximately 227 MHz operation, and a 5 ns maximum propagation delay. Its in-system programming capability allows configuration data to be loaded into the device through its programming interface, supporting efficient production programming and design flexibility. The industrial-temperature suffix identifies the grade intended for operation across an extended commercial temperature range.

The -5 speed designation corresponds to the 5 ns maximum-delay performance grade identified for this part. This places the device between faster and slower members of the LC4256B family while retaining the same 176-pin implementation. The result is a useful balance between logic performance, I/O availability, and design complexity for systems that do not require the maximum speed of the fastest family member.

Typical uses include industrial control and factory automation, communications interfaces, test and measurement equipment, embedded system control, and general-purpose glue logic. The 176-pin LQFP package provides a substantial number of external connections compared with smaller CPLD packages, making it suitable when a design requires more I/O than compact devices can offer.

PCB design should preserve the manufacturer's recommended power, ground, configuration, and I/O layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs must be handled according to the manufacturer guidance to avoid unpredictable switching behavior. Programming-interface signals should remain accessible if in-system reconfiguration is required.

This product page organizes the verified device identity, package details, family alternatives, comparison parameters, sourcing path, and design considerations into one engineering reference. It also distinguishes confirmed specifications from parameters that should be checked directly in the manufacturer datasheet before schematic release or PCB layout approval.

Alternativas directas para LC4256B-5T176I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LC4256B-5T176I (mismo factor de forma y huella) — difiere en Architecture, Device Type, Temperature Grade.

Lattice Semiconductor
Architecture: SuperFAST high-density PLD
Device Type: Complex Programmable Logic Device (CPLD)
Temperature Grade: Commercial C grade
Comparar con LC4256B-5T176I →

LC4256B-5TN176I

✅ Sustitución directa
📦 TQFP-176 (LQFP-176)
Same 256-macrocell architecture, 176-pin interface, 2.5 V class, and 5 ns grade; ordering-code suffix differs by 0 ns in stated propagation delay

📋 Alternativa de referencia (no en el catálogo)

LC4256B-5T176C

✅ Sustitución directa
Lattice Semiconductor
📦 TQFP-176 (LQFP-176)
Complex Programmable Logic Device (CPLD) · SuperFAST high-density PLD · 156 MHz · 3.3 V, 2.5 V, and 1.8 V · In-system programmable · Nonvolatile programmable logic · LFQFP · Square

Consulte el precio

Ver hoja de datos →

LC4256B-3TN176C

✅ Sustitución directa
📦 TQFP-176 (LQFP-176)
Same 176-pin interface and 256-macrocell family; 3 ns speed grade is 2 ns faster than the 5 ns target grade

📋 Alternativa de referencia (no en el catálogo)

LC4256B-3T176I

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 TQFP-176 (LQFP-176)
Same 176-pin footprint and industrial-temperature class; 3 ns speed grade is 2 ns faster than the target's 5 ns grade

📋 Alternativa de referencia (no en el catálogo)

LC4256B-75T176C

✅ Sustitución directa
📦 TQFP-176 (LQFP-176)
Same 176-pin LC4256B interface and 2.5 V class; speed-grade suffix changes from -5 to -75 while commercial grade replaces industrial grade

📋 Alternativa de referencia (no en el catálogo)

LC4256B-5T176I Valores máximos y características eléctricas

Device Type In-system-programmable CPLD
Product Family ispMACH 4000B
Macrocell Count 256 macrocells
Maximum Frequency 227 MHz
Maximum Propagation Delay 5 ns
Core Supply Voltage 2.5 V
Supported Supply Voltages in Product Family 1.8 V, 2.5 V, 3.3 V
Architecture Blend of ispLSI 2000 and ispMACH 4A architectures
Programming Type In-system programmable
Encapsulado 176-pin LQFP
Recuento de pines 176 pins
Tipo de montaje Surface mount
Temperature Grade Industrial grade

Guía de configuración de pines de LC4256B-5T176I 176-pin lqfp

Configuración de pines para LC4256B-5T176I (encapsulado 176-pin lqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 176-pin lqfp para LC4256B-5T176I

No hay datos detallados de patillaje disponibles para LC4256B-5T176I.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LC4256B-5T176I es adecuado para 6 aplicacións: Industrial Automation Control, Factory Automation Interfaces, Communications Interface Consolidation, Test and Measurement Equipment, Embedded System Glue Logic, LED and Display Control.

🏭

Industrial Automation Control

The LC4256B-5T176I fits industrial automation controllers that combine sequential logic, interface decoding, and multiple external signals in one programmable device. Its 256 macrocells provide substantially more logic capacity than a small CPLD, while the 176-pin LQFP supports a broad connection count for encoders, sensors, actuators, and communications interfaces. The 5 ns maximum delay supports timing designs operating up to the listed 227 MHz. For industrial equipment, confirm the operating-temperature limits, isolate noisy power and motor paths, and validate every input and output assignment against the manufacturer pinout before releasing the PCB layout.

🏭

Factory Automation Interfaces

The LC4256B-5T176I is suitable for factory-automation interface logic where programmable timing and extensive I/O are more important than a very large FPGA fabric. It can implement protocol conversion, handshake control, pulse qualification, and machine-state logic while operating from a 2.5 V core class. The 176-pin package allows designers to reserve separate connections for differential or high-speed pairs, isolated interface boundaries, and diagnostic signals. Its in-system programming capability also permits production configuration and controlled field updates when the surrounding system supports the required programming interface and power-management sequence.

🌐

Communications Interface Consolidation

The LC4256B-5T176I can consolidate communications-interface glue logic that would otherwise occupy multiple small programmable devices. Its 256 macrocells and 176 available package connections are useful for framing control, FIFO-adjacent sequencing, status registers, and programmable I/O buffering. The listed 227 MHz maximum operating frequency and 5 ns maximum delay provide timing capability for many control-oriented interfaces, although actual signal-integrity limits depend on the I/O standard, board topology, and output loading. Validate edge rates, impedance, grounding, and any external transceiver requirements in the final signal-integrity analysis.

🔧

Test and Measurement Equipment

The LC4256B-5T176I fits test and measurement instruments that require coordinated control logic, instrument-bus decoding, trigger sequencing, and front-panel functions. The large 176-pin package provides enough connectivity to separate measurement inputs, calibration controls, status indicators, and communications links, while 256 macrocells support nontrivial control architectures. The in-system-programmable configuration supports repeatable production loading and engineering revisions. For precision analog and measurement circuitry, keep digital switching away sensitive nodes, use suitable isolation or shielding, and treat the CPLD as a digital controller rather than a substitute for precision analog front ends.

🖥️

Embedded System Glue Logic

The LC4256B-5T176I is useful as programmable glue logic around a processor or FPGA when several custom timing, decode, and control functions must be consolidated. It can generate enables, arbitrate requests, translate interface formats, or implement legacy timing in parallel with the primary controller. The 176-pin LQFP accommodates both the primary logic and dedicated control pins, while the 5 ns delay grade provides margin for many synchronous control paths. The system designer must still define boot-state behavior, programming access, reset requirements, and fail-safe outputs so that the logic remains predictable before configuration or after a configuration fault.

💡

LED and Display Control

The LC4256B-5T176I can manage display scanning, LED multiplexing, button decoding, and animation sequencing in control-oriented systems. Its 256 macrocells allow multiple display banks and refresh counters to coexist with system-control logic, while the 176-pin package provides a high connection count for display segments, enable lines, and controls. The listed 227 MHz operation is generally more than sufficient for common multiplexed LED matrices, but the designer should size timing from segment count, refresh target, and driver propagation delay. Use constant-current LED drivers where appropriate and account for display-current limits and grounding in the power-distribution design.

Resumen de productos recomendados

LC4256B-5T176C Lattice Semiconductor Se usa en: Industrial Automation Control, Factory Automation Interfaces, Test and Measurement Equipment, LED and Display Control LC4256B-5TN176I Closely related 176-pin ordering variant Se usa en: Industrial Automation Control, Communications Interface Consolidation, Embedded System Glue Logic LC4256B-3TN176C Alternative 176-pin family member for interface logic Se usa en: Factory Automation Interfaces, Test and Measurement Equipment, LED and Display Control LC4256B-3T176I Faster-speed LC4256B interface alternative Se usa en: Communications Interface Consolidation, Embedded System Glue Logic
What is the LC4256B-5T176I?
The LC4256B-5T176I is a Lattice Semiconductor in-system-programmable CPLD built on the ispMACH 4000B architecture. It contains 256 macrocells, operates at up to 227 MHz, and is packaged in a 176-pin LQFP. According to the Lattice Semiconductor manufacturer datasheet, the device combines programmable logic, programmable interconnect, and in-system configuration capability for designs requiring flexible post-manufacture logic updates.
What are the key specifications of LC4256B-5T176I?
The key specifications of the LC4256B-5T176I include 256 macrocells, a maximum operating frequency of 227 MHz, a 5 ns maximum delay, and a 2.5 V core supply. The manufacturer datasheet identifies the device as part of the ispMACH 4000B family and supports in-system programming. These figures place it in the SuperFAST high-density PLD category while retaining a 176-pin LQFP interface for designs requiring extensive I/O.
Where can I download the LC4256B-5T176I datasheet PDF?
The LC4256B-5T176I datasheet PDF can be accessed through the Lattice Semiconductor device page or through the linked manufacturer-datasheet mirror on this page. The document should be used to confirm the complete pin assignment, configuration guidance, electrical limits, timing tables, and recommended decoupling network. According to the manufacturer datasheet, this device belongs to the 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD family.
Where is the LC4256B-5T176I pinout located?
The LC4256B-5T176I pinout is located in the pin-configuration and package-information section of the Lattice Semiconductor manufacturer datasheet. It is a 176-pin surface-mount LQFP device, so the drawing must be used when assigning power, ground, configuration pins, and user I/O. Do not infer the pinout from a smaller CPLD in the same family because package pin numbers do not transfer between packages.
Is the LC4256B-5T176I suitable for industrial control systems?
The LC4256B-5T176I is suitable for industrial control systems when its electrical and temperature limits satisfy the design requirements. The device has 256 macrocells, up to 227 MHz operation, a 5 ns maximum delay, in-system programming, and a 176-pin LQFP package. According to the manufacturer datasheet, the I suffix identifies the industrial-grade version; verify the exact operating-temperature range before environmental qualification.
Can LC4256B-5T176I be programmed after installation?
Yes, the LC4256B-5T176I supports in-system programming, allowing configuration through the device programming interface after it has been mounted on the PCB. This supports design revisions, automated production programming, and selective updates where system requirements permit reconfiguration. According to the Lattice Semiconductor manufacturer datasheet, the design must preserve the required configuration interface and adhere to the specified programming voltage and signal sequencing.
LC4256B-5T176I vs LC4256B-5TN176I — which should be selected?
The LC4256B-5T176I and LC4256B-5TN176I are closely related LC4256B devices with the same 176-pin device family and nominal 5 ns performance grade. The exact ordering-code distinction determines the applicable delivery or temperature configuration, so the purchasing drawing and manufacturer datasheet should control final selection. According to distributor part records, both use the same underlying ispMACH 4000B architecture and 176-pin package implementation.
When should I choose LC4256B-5T176I over a faster LC4256B grade?
Choose the LC4256B-5T176I when a 5 ns maximum-delay grade is sufficient and the design does not require the shorter delay of a faster family member. The -5 grade provides a balance between performance and timing margin while retaining 256 macrocells, approximately 227 MHz maximum operation, and 176 pins. According to the manufacturer datasheet, timing should be evaluated against the system clock and external interface requirements rather than selected from frequency alone.
When should I choose a smaller LC4256B package instead of LC4256B-5T176I?
Choose a smaller LC4256B package when the design needs fewer I/O and a smaller PCB footprint. The LC4256B-5T176I uses a 176-pin LQFP and is better suited to designs needing a broad interface or substantial external connectivity. According to the Lattice Semiconductor manufacturer datasheet, device selection should be based on required I/O, logic capacity, timing, power supply, temperature grade, and the exact package pinout.
What is the best drop-in replacement for LC4256B-5T176I?
The closest drop-in candidates are LC4256B devices that retain the 176-pin LQFP footprint, 256-macrocell capacity, and 2.5 V operating class. LC4256B-5TN176I is the closest documented ordering variant, while speed-grade alternatives must be checked for timing changes. According to the manufacturer datasheet, a package-compatible replacement still requires validation of pin functions, timing, power sequencing, configuration, and temperature grade.
Can another manufacturer directly replace LC4256B-5T176I?
A direct cross-manufacturer replacement cannot be confirmed from the available information. The LC4256B-5T176I is an in-system-programmable CPLD whose programming implementation, architecture, timing, and 176-pin LQFP assignment must all remain compatible. A device with the same package or macrocell count alone is not a drop-in replacement; request a documented pin-to-pin cross-reference and verify the configuration file and timing against the Lattice Semiconductor manufacturer datasheet.
Where can I buy LC4256B-5T176I online?
Use the Request a Quote form on this page to request the LC4256B-5T176I, current availability, lead time, and order quantity. Because this device is identified as obsolete, availability can be limited and may depend on remaining manufacturer or channel inventory. Confirm the exact suffix, package, condition, and programming documentation before releasing a purchase order, particularly when the part will be used in a new production design.
What is the price of LC4256B-5T176I?
Current commercial terms for the LC4256B-5T176I should be requested through the Request a Quote form on this page. This obsolete CPLD may have limited inventory, so price and availability can change with quantity and condition. Include your required delivery schedule, acceptable package suffix, and inspection requirements in the request so the quotation matches the exact LC4256B-5T176I configuration.
What is the lead time and stock status for LC4256B-5T176I?
The LC4256B-5T176I is listed as obsolete, so current stock and lead time must be confirmed through the Request a Quote form on this page. Do not assume that a distributor search result corresponds to production inventory. For a redesign, request lifecycle confirmation, any remaining lot details, traceability information, and confirmation that the exact ordering code remains unchanged.
How should LC4256B-5T176I decoupling and layout be designed?
Place the manufacturer-recommended bypass capacitors directly beside the corresponding power pins and provide a low-impedance, continuous ground plane. Keep configuration and programming routes short and away from sensitive analog or high-speed nets, then follow the package pinout in the manufacturer datasheet. According to the Lattice Semiconductor documentation, power-supply sequencing, startup behavior, and unused-pin treatment must be checked in the device-level design guidance.

Datos de referencia de ingeniería para LC4256B-5T176I — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LC4256B-5T176I when an existing 176-pin LC4256B design needs an industrial-grade, 5 ns CPLD and an obsolete-part redesign must retain the established architecture. LC4256B-5TN176I is the closest documented alternative when only the ordering suffix differs, while LC4256B-5T176C can be considered only when commercial-temperature operation is acceptable. LC4256B-3T176I is appropriate when a 3 ns speed grade is beneficial, but timing must be revalidated because hold-time and system-level behavior can change with the faster grade. LC4256B-3TN176C provides the faster grade with a commercial-temperature suffix. For any substitution, verify package pinout, power rails, programming compatibility, operating-temperature limits, and configuration-file support. Do not use a different manufacturer solely because it offers a 176-pin package; CPLD architecture and programming compatibility are equally critical.

Comparación con alternativas

Parámetro Este producto LC4256B-5TN176I LC4256B-5T176C LC4256B-3TN176C LC4256B-3T176I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package TQFP-176 (LQFP-176) TQFP-176 (LQFP-176) TQFP-176 (LQFP-176) TQFP-176 (LQFP-176) TQFP-176 (LQFP-176)
Product Family ispMACH 4000B ispMACH 4000B ispMACH 4000B ispMACH 4000B ispMACH 4000B
Macrocell Count 256 macrocells 256 macrocells 256 macrocells 256 macrocells 256 macrocells
Maximum Propagation Delay 5 ns 5 ns 5 ns 3 ns 3 ns
Temperature Grade Industrial grade Industrial grade Commercial grade Commercial grade Industrial grade
Programming Type In-system programmable In-system programmable In-system programmable In-system programmable In-system programmable

Diferenciadores clave

  • Closest ordering variant retains the same speed and interface (frente a LC4256B-5TN176I)
  • Faster speed grade is available in the same package (frente a LC4256B-3T176I)
  • Industrial temperature grade distinguishes the target from the commercial variant (frente a LC4256B-5T176C)

Notas de diseño

Use the 176-pin LQFP land pattern from the Lattice Semiconductor package drawing and preserve its pin-one orientation. Place supply bypass capacitors next to the relevant power pins, maintain short return paths to the ground plane, and keep configuration traces away from sensitive external inputs. Because this obsolete part may be procured from legacy inventory, inspect lead coplanarity, solderability, pin condition, and marking before approving a new PCB assembly.

Do not select a replacement using package and macrocell count alone. Confirm the operating voltage, configuration interface, timing grade, temperature suffix, and every user-pin function. The -3 grade offers a 2 ns shorter nominal maximum delay than the -5 target, while commercial-grade suffixes may not be acceptable for industrial environments. Re-run timing analysis after substitution because a faster grade can change hold-time margin and board-level behavior.

Follow the manufacturer-recommended supply tolerances, decoupling values, and power-up sequencing for the selected configuration. Verify the behavior of configuration pins and I/O states during reset and startup so that outputs do not enter an unsafe state. If multiple legacy inventory lots may be combined, verify that each lot has the same revision, speed grade, temperature grade, and programming specification before consolidation.

Treat the 176-pin package as capable of supporting many interfaces, but evaluate each signal individually for I/O standard, edge rate, loading, and board routing. Avoid routing sensitive clocks or analog-related control signals adjacent to switching outputs and high-current digital nets. Use the manufacturer's timing and I/O guidance for setup, hold, clock, and output-loading assumptions rather than treating the 227 MHz figure as a guaranteed signal rate for every I/O.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. The device is an industrial-grade programmable-logic IC rather than an automotive-qualified component.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LC4256B-5T176I LC4256B-5T176I datasheet LC4256B-5T176I datasheet pdf LC4256B-5T176I pinout LC4256B-5T176I equivalent LC4256B-5T176I replacement LC4256B-5T176I cross reference LC4256B-5T176I footprint LC4256B-5T176I price LC4256B-5T176I stock Lattice LC4256B-5T176I LC4256B-5T176I vs LC4256B-5TN176I

Componentes & términos relacionados

Lattice Semiconductor LC4256B-5T176I LC4256B-5TN176I LC4256B-5T176C LC4256B-3TN176C LC4256B-3T176I LC4256B-75T176C ispMACH 4000B ispLSI 2000 ispMACH 4A complex programmable logic device CPLD programmable logic device integrated circuit in-system programmable 256 macrocells 227 MHz 5 ns propagation delay 2.5 V core supply 176-pin LQFP TQFP package family surface-mount package industrial-grade semiconductor factory automation industrial control
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ