LM393DR2G - Dual Open-Collector Comparator | onsemi
MPN: LM393DR2G ✓ چالاکLM393DR2G گشتی
A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level output indicating which input is higher. A dual comparator contains two electrically independent comparator channels in one package, allowing simultaneous or separate threshold-monitoring functions. The open-collector output requires an external pull-up resistor, which provides flexible output voltage and rise-time control while allowing several open-collector outputs to share a bus.
The LM393 series offers two independent precision comparators and input offset voltage specifications as low as 2.0 mV, according to the onsemi LM393 product page. Its common-mode behavior supports single-supply designs where the lower supply rail is ground. The open-collector outputs are compatible with conventional pull-up-based digital interfaces, while the 8-SOIC package supports standard surface-mount assembly and rework.
Operation is specified from a single 2 V to 36 V supply, as identified in the LM393DR2G Mouser listing. The device is a bipolar comparator rather than a rail-to-rail CMOS comparator. Its supply arrangement permits either a single positive rail with a grounded reference or split supplies around ground. Because the output transistor is open collector, the output can pull low but cannot actively drive a high voltage without a pull-up network.
Typical uses include sensor-threshold detection, overvoltage and undervoltage monitoring, window comparators, industrial control interfaces, and logic-level translation. Two channels can monitor independent signals, or they can be configured together for a hysteretic switch or window detector. A pull-up resistor sets the passive output-high voltage and can be selected to suit the receiving logic family.
Designers should verify input and output limits, common-mode range, response time, and load-current requirements against the manufacturer datasheet before applying the comparator outside nominal conditions. Keep the input common-mode voltage within its rated range, account for input offset when setting precision thresholds, and place the external pull-up resistor close enough to the output to limit parasitic capacitance and rise time.
This page combines manufacturer-family information, distributor listings, verified package details, cross-reference candidates, application guidance, and design notes. It also distinguishes genuine pin-compatible options from package-only lookalikes and highlights the electrical checks required before replacing an LM393DR2G in an existing design.
جێگرەوەکانی جێگۆڕکێ بۆ LM393DR2G — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM393DR2G (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Comparator Type, Response Time, Common-Mode Input Range, Input Offset Voltage.
LM393DR
✅ جێگرەوەی ڕاستەوخۆ✓ بەردەستە
$0.11 / یەکە
بینینی داتاشیت →LM393DR
✅ جێگرەوەی ڕاستەوخۆ✓ بەردەستە
$0.11 / یەکە
بینینی داتاشیت →LM393DR2G زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Comparator Type | Precision, general-purpose, dual comparator |
| Number of Comparators | 2 independent channels |
| جۆری دەرچوون | Open collector |
| Supply Voltage Range | 2 V to 36 V |
| Single-Supply Operation | Supported |
| Split-Supply Operation | Supported |
| Input Offset Voltage | As low as 2.0 mV |
| Common-Mode Input Range | Includes ground during single-supply operation |
| Response Time | 1.3 us |
| پاکێج | 8-SOIC |
| جۆری دامەزراندن | Surface mount |
| Output Compatibility | Open-collector output requiring an external pull-up resistor |
| Operating Temperature Grade | Commercial |
| دۆخی RoHS | unknown |
| REACH Status | unknown |
| Lead-Free Status | unknown |
| AEC-Q100 Qualification | unknown |
ڕێنمایی ڕێکخستنی پینی LM393DR2G 8-soic
ڕێکخستنی پین بۆ LM393DR2G (پاکێجی 8-soic). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ LM393DR2G.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
LM393DR2G گونجاوە بۆ 6 بەکارھێنانs: Industrial Sensor Threshold Detection, Power-Supply Overvoltage Monitoring, Window Comparator, Battery Low-Level Detector, Hysteretic Switching Interface, Logic-Level and System Interface.
Industrial Sensor Threshold Detection
The LM393DR2G is suitable for monitoring a sensor or conditioned analog signal against a reference threshold because it provides two independent precision comparison channels with input offset voltage as low as 2.0 mV. One channel can evaluate the sensor signal while the other monitors a second condition or supplies a complementary indication. The 2 V to 36 V operating range supports both low-voltage sensor systems and higher industrial supply rails. Since the output is open collector, the designer must add a pull-up resistor and choose its value to suit the downstream logic voltage and required switching speed.
پێشنیارکراو
Power-Supply Overvoltage Monitoring
The LM393DR2G can implement an overvoltage or undervoltage monitor by comparing a divided power rail with a precision reference. Its two independent channels allow both conditions to be evaluated, or one channel can be reserved for a second rail. The comparator's single- or split-supply flexibility allows the monitor to operate from a regulated control rail while sensing a wider battery or bus voltage, subject to the maximum input limits. Open-collector fault outputs can pull up a status line without driving a voltage directly, making the device useful in industrial control, battery packs, and embedded power systems.
پێشنیارکراو
Window Comparator
Two LM393DR2G channels can be interconnected to detect whether a signal lies between an upper and lower limit. One comparator identifies the upper crossing and the other identifies the lower crossing, while positive feedback or external logic combines their outputs into a valid-window indication. The low-offset capability, specified as low as 2.0 mV for the LM393 family, helps preserve narrow-window accuracy, although offset, input bias, and resistor tolerance still determine the practical threshold error. The open-collector outputs are convenient for wired-AND behavior when each output has its own pull-up.
پێشنیارکراو
Battery Low-Level Detector
The LM393DR2G can act as a battery low-level detector in portable equipment, industrial backup systems, or energy-storage monitoring. Its ground-referenced common-mode capability under single-supply operation is useful when the monitored signal approaches the negative supply rail. The two channels can indicate either a low battery or a charging-state transition, provided the divider and reference voltages remain inside the permitted input range. Because the output is open collector, a pull-up can define the logic-high level independently of the battery voltage, reducing the need for a rail referenced to the changing source voltage.
پێشنیارکراو
Hysteretic Switching Interface
The LM393DR2G can implement a hysteretic switch that converts a noisy or slowly changing analog condition into a stable digital state. Positive feedback from the output to one input establishes the switching threshold and prevents repeated output toggling near the comparison point, while the second channel can monitor another condition or provide an alternate indication. The 1.3 us response-time listing and open-collector output make the device appropriate for general-purpose control and signal-conditioning interfaces. Select the pull-up resistor carefully because it contributes to output rise time and supply current during the low-output interval.
پێشنیارکراو
Logic-Level and System Interface
The open-collector LM393DR2G output can serve as a flexible logic interface when the receiving device requires a pull-up rather than a actively driven CMOS output. A resistor can connect the output to the destination logic rail, allowing one comparator to operate across multiple interface voltage domains. The 2 V to 36 V supply range gives substantial flexibility in industrial and embedded systems, while the dual configuration provides two independent interface channels. Designers should verify output leakage, sink-current capability, pull-up resistance, and the destination device's rise-time requirement before using the comparator as a high-speed digital driver.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ LM393DR2G — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | LM393DR | LM393DR |
|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | onsemi | Texas Instruments | ROHM Semiconductor |
| Comparator Count | 2 independent channels | 2 independent channels | 2 independent channels |
| Output Type | Open collector | Open collector | Open collector |
جیاکەرەوە سەرەکییەکان
- Two independent general-purpose comparison channels (بەراورد بەTI LM393DR)
- Open-collector output with flexible pull-up voltage (بەراورد بەROHM LM393DR)
- Wide single-supply operating range (بەراورد بەTI LM393DR)
- Low-offset threshold comparison (بەراورد بەROHM LM393DR)
تێبینییەکانی دیزاین
Verify that both input voltages remain within the common-mode range for the selected single- or split-supply configuration. The ground-referenced capability is useful in single-supply designs, but it does not make the inputs immune to overvoltage. Also account for the LM393 family's input offset voltage, which can be as low as 2.0 mV, when defining a precision crossing point. Resistor tolerance and input bias effects should be included in the threshold-error budget.
Place the external pull-up resistor close to the comparator output to minimize trace capacitance and control the open-collector rise time. Keep the output trace away from high-impedance input and threshold nodes to prevent switching transients from coupling into the comparison point. When both channels are used, route their grounds and supply connections directly to the relevant pins and keep sensitive input traces short and away from power-return paths carrying output or pull-up current.
Calculate the pull-up resistor from the required logic-high voltage, output leakage, sink-current limit, and target rise time rather than selecting it only by a default resistance. A smaller pull-up produces a faster rising edge but can exceed the comparator's permitted sink current. A larger pull-up reduces static current while increasing transition time. Check the exact output ratings and destination logic thresholds in the manufacturer documentation before fixing the value.
Do not assume that two devices with the same 8-SOIC outline are automatically interchangeable. Compare the complete pin description, open-collector output ratings, input common-mode range, offset voltage, response time, supply limits, and temperature grade. The TI LM393DR and ROHM LM393DR are credible drop-in candidates, but each manufacturer's datasheet remains the controlling document for those electrical characteristics.
زانیاری پابەندبوون
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited manufacturer or distributor content.