onsemi

LM393AMX - Dual Differential Comparator 36V SOIC-8 | onsemi

MPN: LM393AMX ✓ چالاک
2 V to 36 V Vdss 800 uA Id 8-SOIC (3.90 mm width) Package
MOQ: 1 |

LM393AMX گشتی

The onsemi LM393AMX is a dual differential voltage comparator with supply operation from 2V to 36V single-supply (±1V to ±18V dual-supply), a typical supply current of 800 uA, packaged in an 8-pin SOIC (SOIC-8, 3.90mm body width) delivered in Tape and Reel packaging.

A voltage comparator is an analog integrated circuit that compares two input voltages and drives its output to indicate which input is higher. Comparators form the sensing layer of the signal-chain hierarchy: they sit between sensors or dividers and digital logic, translating analog thresholds into logic-level decisions. The LM393 family, originally introduced by Fairchild Semiconductor and now manufactured by onsemi, remains the industry-standard general-purpose dual comparator.

Key features include comparison of voltages near ground potential thanks to an input common-mode range that extends to the negative rail, open-collector outputs compatible with all forms of logic (TTL, CMOS, RTL, DTL, MOS), and low current drain of 800 uA typ that suits battery-powered designs. The dual-channel integration lets one comparator monitor a threshold while the second implements hysteresis or a second independent trip point.

Architecturally, the LM393AMX uses a PNP differential input stage that allows common-mode input voltages down to ground on a single supply. The uncommitted open-collector output stage requires an external pull-up resistor, which lets the designer set the output logic level to 5V, 3.3V, or any rail up to the supply maximum, simplifying interfacing with mixed-logic systems. The part is specified across the industrial temperature range, and the A-suffix denotes an enhanced-specification grade over the base LM393.

Typical applications include threshold detection and limit monitors, zero-crossing detectors in power conversion, oscillator and relaxation-clock generation, level shifting between logic families, sensor interfacing with photodiodes or thermistors, and over-voltage/under-voltage supervision on 24V industrial buses.

When designing with this device, remember that open-collector outputs need a pull-up resistor and that small hysteresis (a few millivolts via positive feedback) prevents output chatter on slowly moving inputs near the threshold.

This page synthesizes distributor sourcing information, verified drop-in alternatives with package and parameter matching, and practical design notes not found in the manufacturer datasheet.

جێگرەوەکانی جێگۆڕکێ بۆ LM393AMX — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ LM393AMX (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Common-Mode Input Range, Response Time, Output Type, Comparator Type.

Texas Instruments
Package: 8-SOIC
Common-Mode Input Range: Includes ground
بەراوردکردن لەگەڵ LM393AMX →
Texas Instruments
Package: SOIC-8 (D), 3.90 mm body width
Common-Mode Input Range: 0 V to VCC − 1.5 V
Response Time: 1.3 µs (typical)
بەراوردکردن لەگەڵ LM393AMX →
onsemi
Package: 8-SOIC
Common-Mode Input Range: Includes ground during single-supply operation
Response Time: 1.3 us
بەراوردکردن لەگەڵ LM393AMX →
Texas Instruments
Package: 8-SOIC
Response Time: 1.4 microseconds
Output Type: Open-Collector
بەراوردکردن لەگەڵ LM393AMX →

LM393AM

✅ جێگرەوەی ڕاستەوخۆ
onsemi
📦 SOIC-8
Dual differential comparator · 2 channels · 36 V maximum · ±18 V maximum · 800 µA typical · 25 nA typical · Open collector · Compatible with all forms of logic

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM393DR2G

✅ جێگرەوەی ڕاستەوخۆ
onsemi
📦 SOIC-8
Precision, general-purpose, dual comparator · 2 independent channels · Open collector · 2 V to 36 V · Supported · Supported · As low as 2.0 mV · Includes ground during single-supply operation

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM393M

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 · Open-Collector · Standard general purpose · 2 V to 36 V · 1.4 microseconds · 8-SOIC · 8 pins

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM393AD

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 channels · Open collector · Includes ground · -38 V to +38 V · TTL, MOS, and CMOS · Commercial grade · 8-SOIC

پەیوەندی بۆ نرخ

بینینی داتاشیت →

LM393DR

✅ جێگرەوەی ڕاستەوخۆ
Texas Instruments
📦 SOIC-8
Texas Instruments · LM393DR · Dual Differential Comparator · 2 · Open-Collector · 2 V to 36 V · ±1 V to ±18 V · 1 mV

✓ بەردەستە

$0.11 / یەکە

بینینی داتاشیت →

LM393B

✅ جێگرەوەی ڕاستەوخۆ
📦 SOIC-8
upgraded LM393 variant, same footprint; improved offset and speed specifications

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

LM393AMX زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Comparator Type Dual differential comparator
Number of Channels 2
Supply Voltage (Single) 2 V to 36 V
Supply Voltage (Dual) ±1 V to ±18 V
Supply Current (Typ) 800 uA
جۆری دەرچوون Open collector
Input Common-Mode Range Includes ground (V-)
Logic Compatibility TTL, CMOS, RTL, DTL, MOS
پاکێج 8-SOIC (3.90 mm width)
جۆری دامەزراندن Surface Mount
Packaging Tape and Reel (TR)
Product Series LM393 (A grade)
Manufacturer onsemi (originally Fairchild Semiconductor)

ڕێکخستنی پینی LM393AMX

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
پین 1 OUT A — Comparator A output (open collector)
پین 2 IN A- — Comparator A inverting input
پین 3 IN A+ — Comparator A non-inverting input
پین 4 GND / V- — Ground or negative supply
پین 5 IN B+ — Comparator B non-inverting input
پین 6 IN B- — Comparator B inverting input
پین 7 OUT B — Comparator B output (open collector)
پین 8 VCC / V+ — Positive supply

بەکارهێنانە باوەکان

LM393AMX گونجاوە بۆ 6 بەکارھێنانs: Threshold and Limit Detection, Zero-Crossing Detection in Power Conversion, Relaxation Oscillators and Clock Generation, Sensor Interface and Level Shifting, Battery-Powered and Portable Instrumentation, Industrial Automation and Motor Drive Supervision.

⚡

Threshold and Limit Detection

The LM393AMX is the classic choice for comparing a sensor voltage against a reference threshold. Its 2V to 36V single-supply range allows direct connection across industrial 24V buses via a simple resistive divider, while inputs that operate down to ground permit near-zero trip points without negative supplies. The dual channels let one comparator monitor an over-voltage limit while the second watches an under-voltage limit, implementing window supervision in one package. With 800 uA typical supply current, the supervision circuit adds negligible standby drain. Place 10k to 100k pull-up resistors on the open-collector outputs to the logic rail, and add hysteresis via positive feedback so slowly drifting battery or bus voltages do not cause output chatter near the trip point.

🔧

Zero-Crossing Detection in Power Conversion

In AC mains monitoring, phase-angle control, and switching power supplies, the LM393AMX detects when a rectified sine wave crosses a reference, generating timing edges for triac firing or synchronous switching. The wide 36V supply ceiling allows direct connection to rectified low-voltage AC, and the open-collector output cleanly drives optocoupler LEDs or MCU interrupt pins. The PNP input stage sensing near ground potential is essential here, since the zero-cross point sits at the negative rail. Add a few millivolts of hysteresis to reject mains noise, and keep input resistors sized for the peak voltage so the differential stage stays within its common-mode range throughout the cycle.

🔧

Relaxation Oscillators and Clock Generation

A single LM393AMX comparator with an RC network and positive feedback forms a low-cost relaxation oscillator for watchdog timing, LED blinking, or clock generation. The 800 uA typical supply current keeps oscillator power minimal, and operation from 2V supports coin-cell designs. Oscillator frequency is set by the RC time constant; with a 100k resistor and 100nF capacitor the period lands in the tens-of-milliseconds range, easily scaled across audio to kilohertz rates. The open-collector output produces rail-to-rail square waves regardless of supply voltage, and the second comparator in the package remains available for an independent function such as a battery-low alarm on the same board.

🧩

Sensor Interface and Level Shifting

Photodiodes, thermistors, and resistive bridges produce small analog signals that need comparison against thresholds before entering digital logic. The LM393AMX inputs sense voltages near ground, ideal for photodiode current-to-voltage outputs referenced to 0V, while the 36V rating tolerates industrial supply excursions. The open-collector output is the key level-shift asset: pull it to 5V for TTL systems or 3.3V for MCU GPIO, letting a 24V-referenced sensor circuit interface directly to low-voltage logic without additional translation ICs. Use 1% resistors in the reference divider and add an RC filter on the input to suppress sensor noise before comparison.

📱

Battery-Powered and Portable Instrumentation

For battery monitors and portable test equipment, the LM393AMX delivers dual-comparator function at 800 uA typical, and its specified operation from 2V single-supply means it keeps working as lithium cells discharge toward end of charge. The dual channels implement battery-low warning and battery-dead cutoff thresholds independently. Open-collector outputs allow the outputs to be OR-wired (wired-AND) for combined alarm signaling without extra gates. For lowest average power, gate the comparator supply with a small P-channel MOSFET and poll the battery state periodically rather than continuously, cutting effective consumption to microamp-level duty-cycled figures.

🏭

Industrial Automation and Motor Drive Supervision

In factory automation panels and motor drives, the LM393AMX supervises current-sense amplifier outputs against over-current trip levels and monitors DC bus undervoltage. The 36V supply rating directly covers 24V industrial control rails, and the wide input common-mode range handles grounded current-shunt references. Open-collector outputs wire-OR multiple fault signals onto a single active-low fault line to the PLC or drive MCU. Add positive-feedback hysteresis of tens of millivolts to lock the trip behavior against motor PWM ripple, and route the comparator ground return separately from power ground to keep trip accuracy in the millivolt range under high-current switching.

What is the supply voltage range of the LM393AMX?
The LM393AMX operates from 2V to 36V on a single supply, or ±1V to ±18V on dual supplies. According to the manufacturer datasheet, this wide range lets the same comparator serve 3.3V logic systems and 24V industrial monitoring circuits, and the input common-mode range includes ground potential, enabling near-ground threshold detection on single supplies.
What is the quiescent current of the LM393AMX?
The LM393AMX draws a typical supply current of 800 uA for both comparators combined. According to the Fairchild/onsemi datasheet, this low current drain makes the device suitable for battery-powered threshold detection and portable instrumentation where standby power matters, while still providing standard open-collector output drive.
What is the difference between LM393AMX and LM393AM?
There is no electrical difference between the LM393AMX and the LM393AM from onsemi: both are the A-grade dual comparator in the same 8-SOIC package with identical pinout and specifications. The distinction is the packaging format - the AMX suffix denotes Tape and Reel packing for automated production lines, while the AM suffix denotes other packing formats such as tubes or cut tape.
What is the difference between LM393AMX and LM393M?
The LM393AMX is the A-grade version of the LM393 family, while the LM393M is the base-grade version in the same SOIC-8 package. Both are dual open-collector comparators with 2V to 36V single-supply operation and identical pinout, so the A-grade part can be used where the base part is specified; the reverse substitution should be reviewed against tighter A-grade offset specifications.
Can LM393DR2G replace LM393AMX?
Yes, the onsemi LM393DR2G is a suitable drop-in replacement for the LM393AMX. Both are dual general-purpose comparators in the same SOIC-8 footprint with pin-to-pin compatible pinout, open-collector outputs, and 36V maximum supply ratings. Review the datasheet parameters for your specific design, but no PCB layout change is required for standard general-purpose threshold-detection applications.
Is the LM393AMX pin-compatible with the Texas Instruments LM393DR?
Yes, the LM393AMX and the TI LM393DR are pin-to-pin compatible dual comparators in the SOIC-8 package. Both use the standard LM393 pinout (outputs on pins 1 and 7, inverting inputs on pins 2 and 6, non-inverting inputs on pins 3 and 5, ground/V- on pin 4, VCC on pin 8) and open-collector outputs, making them interchangeable in most designs after datasheet verification.
When should I choose the LM393AMX over the LM393AD?
Choose the LM393AMX when your bill of materials is standardized on onsemi sourcing and you want Tape and Reel delivery for automated assembly. The LM393AD from STMicroelectronics offers the same SOIC-8 footprint and LM393 functionality. If supply availability or unit cost from onsemi is favorable, the AMX is the natural choice; both parts meet general-purpose comparator requirements in the same footprint.
Is the LM393AMX suitable for zero-crossing detection on a 24V bus?
Yes, the LM393AMX is well suited to zero-crossing and over-voltage detection on industrial 24V rails because it tolerates up to 36V single-supply operation and its input common-mode range extends to ground. Pair a resistive divider with a pull-up on the open-collector output to interface the trip signal directly to 5V or 3.3V logic.
Does the LM393AMX output need a pull-up resistor?
Yes, the LM393AMX has open-collector outputs that require an external pull-up resistor to the desired logic rail. This open-collector architecture is what makes the comparator compatible with all forms of logic - TTL, CMOS, RTL, DTL and MOS - because the pull-up can be tied to any voltage up to the maximum output rating, letting one comparator drive 5V logic from a 24V-referenced threshold circuit.
What is the best drop-in replacement for the LM393AMX?
The best drop-in replacement for the LM393AMX is the onsemi LM393AM, which shares the identical die specification and SOIC-8 pinout and differs only in packing format. On the same footprint, the LM393DR2G (onsemi), LM393AD (STMicroelectronics), and LM393DR (Texas Instruments) are also pin-to-pin compatible dual comparators suitable for replacement after confirming parameters against your design.
Where can I download the LM393AMX datasheet PDF?
The LM393AMX datasheet PDF is available from the onsemi official product page and from datasheet archives such as alldatasheet.com, which hosts the Fairchild Semiconductor 8-page Dual Differential Comparator document. Use the manufacturer datasheet for pinout tables, electrical characteristics, and application circuits when designing threshold detectors or oscillator circuits with this part.
Where can I find the LM393AMX pinout?
The LM393AMX pinout follows the standard LM393 SOIC-8 arrangement: pin 1 is output A, pin 2 is inverting input A, pin 3 is non-inverting input A, pin 4 is GND/V-, pin 5 is non-inverting input B, pin 6 is inverting input B, pin 7 is output B, and pin 8 is VCC. The pin-description table in the manufacturer datasheet provides the authoritative pin assignments for PCB footprint generation.
What are the key specifications of the LM393AMX that engineers should know?
The LM393AMX is a dual differential comparator specified for 2V to 36V single-supply (±1V to ±18V dual-supply) operation with 800 uA typical supply current, open-collector outputs compatible with all logic families, and inputs that compare voltages near ground potential. It comes in an 8-SOIC package in Tape and Reel packing, and the A suffix indicates the enhanced specification grade of the classic LM393 family from onsemi.
Where to buy LM393AMX and what is the lead time?
The LM393AMX is listed by distributors including DigiKey and Mouser under onsemi part LM393AMX in 8-SOIC Tape and Reel packing. For current stock, unit pricing and lead time for your required quantity, use the Request a Quote form on this page and the XAIPART sourcing team will respond with an offer for your production volume.
Is the LM393AMX still active and recommended for new designs?
The LM393AMX is an active part in onsemi's comparator portfolio and remains a recommended general-purpose choice for new designs that need a low-cost, wide-supply-range dual comparator. The LM393 family has been industry-standard for decades, ensuring long-term sourcing continuity; if a lower-voltage, lower-power option is needed, evaluate newer families such as the TI LM393B or LM393LV variants.
How much hysteresis should I add to an LM393AMX comparator circuit?
Add a few millivolts of hysteresis via positive feedback to prevent output chatter. For a typical circuit with a 100k pull-up and a feedback resistor from output to the non-inverting input, a 1M feedback resistor around a divider yields roughly tens of millivolts of hysteresis depending on your divider impedances - calculate the exact trip-window from your resistor values. The datasheet application section shows standard hysteresis topologies for both inverting and non-inverting configurations.

داتای سەرچاوەی ئەندازیاری بۆ LM393AMX — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the LM393AMX when you need the industry-standard A-grade dual comparator in SOIC-8 with full 2V-to-36V supply coverage, particularly for 24V industrial supervision, zero-crossing detection, and battery monitors that must operate down to 2V. Select the onsemi LM393AM when only a different packing format is required - electrically identical. Choose LM393DR2G for a same-brand, same-footprint fallback in dual-sourcing strategies. Choose TI LM393DR or ST LM393AD when your supply chain favors those manufacturers; both are pin-to-pin compatible in SOIC-8. Choose the TI LM393B when you need improved offset and speed and can accept a 2.7V minimum supply. Trade-offs: all LM393 variants share the slow general-purpose response time and require output pull-ups; for nanosecond-class comparisons or push-pull outputs, evaluate faster comparator families instead.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە LM393AM LM393DR2G LM393AD LM393DR LM393B
Package SOIC-8 SOIC-8 - same SOIC-8 - same SOIC-8 - same SOIC-8 - same SOIC-8 - same
Brand onsemi onsemi onsemi STMicroelectronics Texas Instruments Texas Instruments
Number of Comparators 2 2 2 2 2 2
Supply Voltage Range 2 V to 36 V (±1 V to ±18 V) 2 V to 36 V 2 V to 36 V 2 V to 36 V 2 V to 36 V 2.7 V to 36 V
Supply Current (Typ) 800 uA 800 uA 800 uA 800 uA 800 uA 800 uA
Output Type Open collector Open collector Open collector Open collector Open collector Open collector
Grade A grade (enhanced) A grade Standard grade Standard grade Standard grade Improved (B) grade

جیاکەرەوە سەرەکییەکان

  • A-grade enhanced specifications (بەراورد بەLM393M)
  • Wider proven supply range for 24V industrial buses (بەراورد بەLM393B)
  • Same-brand second-source within onsemi (بەراورد بەLM393DR2G)

تێبینییەکانی دیزاین

The LM393AMX has open-collector outputs - forgetting the pull-up resistor is the most common first-use error and results in no output signal at all. Fit a 10k pull-up to the logic rail (5V or 3.3V) on each output used. Also, both comparators share the V- (pin 4) supply pin; if only one channel is used, tie the unused inputs to a defined logic level (e.g., both to ground or both to a divider) rather than leaving them floating, which can cause the unused output to oscillate and inject noise into the active channel.

Add hysteresis whenever the input signal moves slowly relative to the comparison decision. Without it, input-referred noise (typically a few millivolts) causes the output to chatter near the threshold, generating spurious interrupts in MCU systems. A positive-feedback resistor from output to the non-inverting input, sized about 100x the source impedance of the divider, gives tens of millivolts of trip window. Calculate the resulting trip-point shift explicitly, since feedback also offsets the nominal threshold by the hysteresis magnitude.

Place a 100nF ceramic decoupling capacitor directly across pins 4 and 8 of the SOIC-8 footprint, with the trace from the capacitor to pin 8 kept under 10mm. When comparing signals referenced to ground on a single supply, connect the input divider ground return to the same node as pin 4 to avoid millivolt-level ground drops shifting the trip point. For inputs routed from high-impedance sources above roughly 10k source impedance, add a small RC filter (e.g., 1k and 1nF) to limit noise pickup on the PCB trace.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

Compliance status not stated in the retrieved listings; confirm RoHS/REACH status on the onsemi product page or via the Request a Quote form.

داتا پشتڕاستکراوەتەوە لە: 2026-11-08 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

lm393amx datasheet lm393amx datasheet pdf lm393amx pinout lm393amx equivalent lm393amx replacement lm393amx cross reference lm393amx vs lm393m lm393amx stock price onsemi lm393amx lm393amx footprint lm393 amplifier circuit lm393 max4466 lm393 dual comparator soic-8

پێکهاتە و زاراوە پەیوەندیدارەکان

onsemi Fairchild Semiconductor LM393AMX LM393AM LM393DR2G LM393AD LM393DR LM393B Texas Instruments STMicroelectronics differential comparator voltage comparator analog comparator open-collector output dual comparator SOIC-8 SOIC package family surface mount Tape and Reel TTL CMOS zero-crossing detection RoHS
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ