AD621AR vs AD621BNZ Comparison
Detailed side-by-side comparison of AD621AR by Analog Devices and AD621BNZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | AD621AR | AD621BNZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Single-channel instrumentation amplifier | Instrumentation amplifier |
| Manufacturer | Analog Devices | — |
| Package | 8-SOIC | 8-pin PDIP |
| Number of Circuits | 1 circuit | — |
| Architecture | Integrated three-op-amp instrumentation-amplifier architecture | — |
| Power Class | Low power | — |
| Drift Class | Low drift | — |
| Accuracy Class | High accuracy | — |
| Supply Voltage | ±18 V maximum | — |
| Gain Range | 10 to 10,000 | — |
| Gain Error | [DATA_NEEDED: maximum gain error] | — |
| Gain Drift | [DATA_NEEDED: maximum gain drift] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 125 µV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Common-Mode Rejection Ratio | [DATA_NEEDED: minimum common-mode rejection ratio] | 120 dB to 130 dB, condition dependent |
| Small-Signal Bandwidth | [DATA_NEEDED: gain-dependent bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.2 V/µs typical |
| Supply Current | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Number of Amplifiers | — | 1 circuit |
| Supply Voltage Range | — | ±2.3 V to ±18 V |
| Bandwidth | — | 800 kHz typical |
| Gain | — | 10 or 100, pin-strappable |
| Output Type | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| Mounting Type | — | Through-hole |
| AEC-Q100 Qualification | — | not_applicable |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Voltage Range | — | [DATA_NEEDED: output voltage range] |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |