AD621AR vs AD621BNZ Vergleich
Detaillierter Direktvergleich von AD621AR von Analog Devices und AD621BNZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | AD621AR | AD621BNZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Single-channel instrumentation amplifier | Instrumentation amplifier |
| Manufacturer | Analog Devices | — |
| Gehäuse | 8-SOIC | 8-pin PDIP |
| Number of Circuits | 1 circuit | — |
| Architecture | Integrated three-op-amp instrumentation-amplifier architecture | — |
| Power Class | Low power | — |
| Drift Class | Low drift | — |
| Accuracy Class | High accuracy | — |
| Versorgungsspannung | ±18 V maximum | — |
| Gain Range | 10 to 10,000 | — |
| Gain Error | [DATA_NEEDED: maximum gain error] | — |
| Gain Drift | [DATA_NEEDED: maximum gain drift] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 125 µV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Common-Mode Rejection Ratio | [DATA_NEEDED: minimum common-mode rejection ratio] | 120 dB to 130 dB, condition dependent |
| Small-Signal Bandwidth | [DATA_NEEDED: gain-dependent bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.2 V/µs typical |
| Versorgungsstrom | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Number of Amplifiers | — | 1 circuit |
| Supply Voltage Range | — | ±2.3 V to ±18 V |
| Bandwidth | — | 800 kHz typical |
| Gain | — | 10 or 100, pin-strappable |
| Ausgangstyp | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| Montageart | — | Through-hole |
| AEC-Q100 Qualification | — | not_applicable |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Ausgangsspannungsbereich | — | [DATA_NEEDED: output voltage range] |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |