AD621AR vs AD621BNZ 比較
詳細並排比較 AD621AR 由 Analog Devices 與 AD621BNZ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | AD621AR | AD621BNZ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Single-channel instrumentation amplifier | Instrumentation amplifier |
| Manufacturer | Analog Devices | — |
| 封裝 | 8-SOIC | 8-pin PDIP |
| Number of Circuits | 1 circuit | — |
| Architecture | Integrated three-op-amp instrumentation-amplifier architecture | — |
| Power Class | Low power | — |
| Drift Class | Low drift | — |
| Accuracy Class | High accuracy | — |
| 供應電壓 | ±18 V maximum | — |
| Gain Range | 10 to 10,000 | — |
| Gain Error | [DATA_NEEDED: maximum gain error] | — |
| Gain Drift | [DATA_NEEDED: maximum gain drift] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 125 µV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Common-Mode Rejection Ratio | [DATA_NEEDED: minimum common-mode rejection ratio] | 120 dB to 130 dB, condition dependent |
| Small-Signal Bandwidth | [DATA_NEEDED: gain-dependent bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.2 V/µs typical |
| 供應電流 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Number of Amplifiers | — | 1 circuit |
| Supply Voltage Range | — | ±2.3 V to ±18 V |
| Bandwidth | — | 800 kHz typical |
| Gain | — | 10 or 100, pin-strappable |
| 輸出類型 | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| 安裝類型 | — | Through-hole |
| AEC-Q100 Qualification | — | not_applicable |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 輸出電壓範圍 | — | [DATA_NEEDED: output voltage range] |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |